Similar Questions

• Can not connect to the Internet: this site is not reachable

  Hi all

  Recently, I am not able to open most Web sites,

  It happened all of a sudden, it comes with below error:

  
  

  This site is not reachable

  Kickass.Re refuses to connect.

  Try:

  • Reload the page
  • Checking the connection
  • Check the proxy server and firewall

  ERR_CONNECTION_REFUSED

  In order to get your help

  Adware can be installed on your Mac. Remove the Adware.

  1. use Malwarebytes Anti-Malware for Mac to remove adware.

  https://www.Malwarebytes.org/antimalware/Mac/

  Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit Malwarebytes Anti-Malware.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  3 safari > Preferences > Search > search engine:

  Select your preferred search engine

  4. visit the site that you want it to be the home page

  Safari > Preferences > general > home page

  Click on the button "set to the current Page.

• How to fix "this site is not reachable" on Mac?

  I have a Wordpress site that is mapped to a domain (through Network Solutions) and it does not load on my computer. It loads on other computers on my network, but not my Mac, Capitan 10.11.5.

  Help, please! This is the message:

  This site is not reachable

  shootthecritic.com refuses to connect.

  Thank you!

  You, or someone else using your computer, may have hacked the system to redirect requests on some servers. The modified file is/etc/hosts.

  The best way to solve the hosts file is to restore from a backup prior to the change, or copy the file unmodified from another Mac. There is sometimes a copy unmodified with the name "hosts ~ orig" next to file hosts changed on the same Mac; If so, you can copy the contents of this file in the hosts file. Ask for advice if you need it.

  If you can not do everything above, please see below.

  Back up all data before proceeding.

  If you have more than one user account, you must be logged in as an administrator.

  Triple-click anywhere in the line below on this page to select this option:

  open -e /etc/hosts

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Should open a TextEdit window. At the top of the window, you should see this:

  ### Host Database## localhost is used to configure the loopback interface# when the system is booting.  Do not change this entry.##127.0.0.1                              localhost255.255.255.255          broadcasthost::1                                        localhost

  Below, you can see a few other lines. The first 9 lines should be exactly as before, except for differences in the empty space in the lines. Otherwise, you cannot use this procedure - STOP and ask for advice.

  If the content of the TextEdit window is described and there are extra lines in the file, close the window, and then enter the following command in the Terminal window in the same way as before (by copy and paste):

  sudo sed -i~ '10,$d' /etc/hosts

  This time you will be prompted for your login password, which are not displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. Leaving the Terminal.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Who will set the hosts file. There is now a copy of the old file hosts with the name ' guests ~ "in the same folder as"hosts ". You can remove the copy if you wish. Do not delete the file named "hosts".

• I accidentally click to view full screen on Firefox and now I can't cancel it. My toolbar, bookmarks, etc. is not visible. While the browser opens, the bar appears but then pops up where it is not reachable. How can I disable the mode full screen?

  To view full screen on Firefox, I accidentally clicked and now I can't cancel it. My toolbar, bookmarks, etc. is not visible. While the browser opens, the bar appears but then pops up where it is not reachable. How can I disable the mode full-screen without access to display options?

  The F11 key

• This site is not reachable

  My MacBook Pro w/retina is a matter of days. The only thing I've done until now is put a Front on it and 5 extensions on Chrome. I already use a problem while trying to open a reputable site which is our phone company. When I click on Log In, I get ' this site is not reachable... unexpectedly closed connection "."

  I can't open the site in Safari, either.  It opens on my laptop and my 3 iPhones using the same router.

  There it is again!

  I tried the things:

  I unchecked all extension a

  I disabled my AV

  I scanned for viruses and malware

  Cleaned cache in Chrome

  Nothing has worked.

  Suggestions please

  The first step is to get rid of your software "anti-virus" without value, which can be the cause of the problem. Remove it as instructed by the developer after you back up all data. Never install something like this even once.

• Windows 7 system error 1231 network location is not reachable

  I have a Win7 Ultimate domain member with a static IP address. Recently I discovered that I can't seem to use NetBIOS over TCPIP or similar to remote machines.  If I try to map a drive to a UNC I get an error 1231 about a network location that is not reachable.  Same result if used the remote IP instead of the netbios name.  I ping the remote server without error.  If I try something like a clear view on a remote server, it fails, but it works locally.  I created a share on Win7 box and I see another customer. I can not just make network connections.

  NetBT is running.  NetBios over TCP/IP is enabled.

  I disabled the NETWORK card and re-enabled.  I disabled TCPIP, re-activated and even re-installed IPv4.

  Nbtstat-n displays the name of the office.

  There is no LMHosts file used.

  Firewall is completely turned off and no antivirus is running or even installed also.

  I am short of ideas short of re - install the operating system.

  Summary: I can't map or view resources netbios on the network, but I can create shares on Win7 and communicate with them remotely.

  I need a new set of eyes. Suggestions?

  Jeffery Hicks
  PowerShell for Microsoft MVP
  http://jdhitsolutions.com/blog
  follow me: www.twitter.com/JeffHicks
  "Those who forget to script are doomed to repeat their work."
  Now available: Managing Active Directory with Windows PowerShell: TFM

  SOLVED

  I thought that something had to be corrupted.  I uninstalled the file and print on the adapter Services then reinstalled. Rebooted and now I'm back to where I need to be. Jeffery Hicks
  PowerShell for Microsoft MVP
  http://jdhitsolutions.com/blog
  follow me: www.twitter.com/JeffHicks
  "Those who forget to script are doomed to repeat their work."
  Now available: Windows PowerShell 2.0: TFM (SAPIEN Press)

• The administration server is not reachable from the node target via HTTP (S)

  Hi all
  
  I tried add Host in Oracle 12 c. I previously added Linux host OS, but I couldn't add OS AIX in 12 c. I did the auto update for Agent of AIX. You can find my OS and DB info on below.
  
  Server Oracle 12 c - OS is SunOS 5.10
  Client host Oracle 11.2.0.1.0 - OS is AIX
  
  During the installation, I got this error message "the administration server is not reachable from the node target via HTTP (S). In topology, we do not use any firewall... As I said I've added Linux and SunOS but AIX does not...
  
  How can I solve that?
  
  B.R

  You already mentioned the metalink note? Otherwise please see note

  EM 12: Agent deployment fails with error "the administration server can be reached from the node target via HTTP (S)" [1393450.1 ID]

  Kind regards
  http://www.oracleracexpert.com
  Remove the grid or the repository targets control agents
  http://www.oracleracexpert.com/2010/06/remove-grid-control-agents-or-targets.html
  Tablespace transportable export and import on the same Endian platforms
  http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html

• Port network members, eth2, is not reachable

  Recently updated firmware on PS4100 to 7.0.5 with assistance from Dell. Since then, reported the San HQ: "network port, eth2, isn't reachable." Failed to get data for this member network performance. "We have only one Bay EqualLogic. There is no problem until the upgrade of the firmware 6.x. Details:

  Group IP: 10.0.10.2

  Management IP: 192.168.2.52

  Members eth2 IP: 192.168.2.53

  24 all subnets on Force10 switches. Machine San HQ on the 192.168.2.0 network, has no access to the iSCSI network (didn't before updating or the other). SAN HQ version is 3.0.1. Both controllers were restarted several times. San HQ machine has been restarted several times. If it was due to a bug (false alert, as seems rather widespread in recent versions), I would just ignore the error that connectivity is restored during the next polling interval. However, the performance data for this period are not seen while the alarm is active, so're missing us huge chunks of data in syslog.  I have changed the cables, moved the switch ports, checked the config of the vlan, etc etc etc. Everything looks OK to me, but this fills my Inbox and is quite annoying. Any suggestions?

  I opened a ticket. It is a known according to Dell issue and will be fixed in a next version of SanHQ.

• HP 3510 - IP not reachable

  My wireless HP 3150 printer is inaccessible with my wireless network. My router is a Linksys E3000.

  Here's what I did:

  * install the program HP and did all the steps
  * Use the USB cable to configure my network SSID & password
  * When I remove the USB cable and try to connect to wireless network:
  * my printer has an IP address given by the router (via DHCP): 192.168.1.115
  * I see this IP on the DHCP of the router table

  * I can ping the IP address of the router, but not from any other machine on the network

  Any ideas?

  Let's set a static IP address on the printer.  Set it to 192.168.1.10 which is outside the range of the DHCP by default for Linksys routers.  Use a fixed channel as the 1, 6 or 11, never 'auto '.    Try to reinstall the software and try again.

• XP SP3 - network location is not reachable - occurs only on LAN - Okay on WLAN

  Hello

  I am running Windows XP SP3 on a Dell Latitude E5500 with a Broadcom Netxtreme 57xx NIC Ethernet. My problem is that I can connect to any and all work and home sharing without any problem more wireless network but cannot do on my connection to the local network.
  I can assure you that
  (a) I ping well resources through the LAN IP addresses and
  (b) can connect to the Internet through the LAN.
  I have also updated my driver Broadcom for later, in vain.
  I also tried several other suggestions such as
  (a) verifying that the computer browser service is running
  (b) verification of correct TransportBindName and SMBDeviceEnabled entries in the registry
  (c) manually the battery to reset TCP/IP
  (d) to uninstall and reinstall the Client for Microsoft networks
  (e) NetBT enabled on the NETWORK adapter
  among other things, all to nothing does not.
  I am also aware that this problem applies to my wired LAN connection and not my wireless LAN, seeming so for me at least to make some of the suggestions above irrelevant or redundant.
  I was wondering if anyone else had other suggestions (in addition to the upgrade to Windows 7, I know, I know, must find the time).
  THX in advance
  Orson.

  Hi, thanks for the advice.

  During the last hour, I solved the problem of UN-installing my Broadcom NIC in device and then allowing Windows to re - Manager install automatically on reboot. Although I'm positive that I've done this before (all the symptoms point to a problem with the drivers for cards/rather than any how important Microsoft / edition) on this occasion, it worked, if everything goes well on a permanent base.
  Concerning
  Orson.

• Windows - XP Service Pack 1 has server not reachable

  Try to rebuild the PC of a disk of XP with Service Pack 1 only systems

  Instructions involve Service Pack 1a is required

  I have download the stub successfully, but when I try to run it, he tries to contact a USA based microsoft Server and fails.

  As a result, I can't add any other service packs until 1a is applied.

  The server is down or is there a problem with the heel?

  If your installation to service pack 1, you don't need service pack 1a.  The difference between sp1 and sp1a was the removal of the last of the "Microsoft Java Virtual Machine", Microsoft had to do as part of a legal settlement with Sun.  It makes no difference what the installation of sp2/sp3.

  Turn on the Windows Firewall and make sure you have an active up-to-date anti-virus application.

  If you have XP sp1, you can go directly to sp3 (you need not sp1a or sp2).  However, see the tips of long date MS MVP PA Bear (which assumes that your "XP systems disk" does NOT test any software particularly any trial Norton or McAfee software):

  HOW to get WinXP SP1 or SP2 fully patched after a "clean install":

  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

• offline files: network is not reachable by car after you enable the folder in offline mode

  I currently use off record quite a lot and have no problem as long as sharing network, on which records are is in the same place, I'm and network connectivity is several GB. When I choose a folder on a \\partagereseau hosted in another place, with less bandwidth and latency, the following events occur: 1) I mark a folder on the network share as 'always available offline' Sync 2) begins, and the entire folder disappears from the browser view only the folder synchronized with success is still visible. After Reboot: P1) when I'm offline only the folder snchronized is visible under the drive letter, nothing else (another where sync worked folder is not available offline are grayed out, have an 'X' on them, and are not accessible) P2) when I'm online I can see the folder structure one level below the drive letter , but all files offline. When I try to go to one, I get a message: "this file is currentry not available on this computer." There is no other way to access the network broken still share more: offline files) 1 turn off completely 2) reformatting of CSC (instructions how to add the key Reg necessary are in this forum) which means I have to then re - sync all folders that are functioning normally.

  HARD drive: 240GB SSD 2 Partitions: System 120 GB, 60 GB free; Given 117 GB 85 GB of free Data with a value of sync: less than 20 GB

  Hello

   
  This problem would be better suited to the TechNet community.
  Please visit the link below and validate the query to improve the assistance:
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Thank you.

• My site is not reachable?

  Anyone who has the experience, when I log onto my site says cannot be reached, then it loads a few seconds later anyway.  I tried the Google Web on Mobile site speed Testing Tool - Google Web site test and it said that my site does not exist!  My site is www.recipe30.com

  I had a huge drop in page visits lately and I'm really interested.  If anyone has any ideas, I'd appreciate your input.

  Thank you.

  Joel.

  When I ran your site if Validation I got the following response:

       500 Status read failed: Connection reset by peer

  This looks like a server or a DNS issue.   Contact your hosting provider.

  Results of the validation - W3C Markup Validator

  Nancy O.

• ODI-1425: Agent Application is not reachable

  A number of changes to the system (backup/restore) took place in our EPM environment, including the patch for 11.1.2.3.500.

  Everything works well, but our FMDEE data loading rules for Oracle EBS financials actual failed.  The details of process FDMEE (and Console ODI and oraclediagent.log) report ODI-1425: request of the officer may not be appealed using the http://server:80 / oraclediagent.

  So I think that the agent may not be working?  There is no oraclediagent service, but perhaps this is changed?

  I can find no error message that says that the agent was able to start.

  What throws me is a successful connection of the FDMEE ODI test: workspace > Data Management > Configuration > system settings > profile Type = ODI > button = check the ODI connection.  Result = "connection to the ODI agent succeeded."

  Running d:\oracle\middleware\user_projects\empsystem1\bin > status opmnctl EssbaseAgent of the Instance yields: EPM_epmsystem1 is Alive.  But I'm not sure to understand where and how to use this tool.

  Running d:\oracle\middleware\EPMSystem11R1\opmn\bin > opmnctl status gives "ORACLE_INSTANCE is not defined.

  Running d:\oracle\middleware\ohs\opmn\bin > opmnctl status gives "ORACLE_INSTANCE is not defined.

  Running d:\oracle\middleware\user_projects\epmsystem1\httpConfig\ohs\bin > status opmnctl ohs_components of the Instance yields: ohsInstance1649849633 is Alive.

  I followed the section of patch 17529887 entitled 'Additional steps for financial data quality management Enterprise Edition'.

  Where to look for more information?  Any ideas?

  ARG!  This whole problem was caused by this port be wrong.  no idea how/why that changed (guessing one of the many patches we applied).

  Thanks again for your help Tom.

• My Ipod will not turn on and says that the activation server is not reachable

  I have pod Gen 5 32 GB

  Apple reports no problem

  http://www.Apple.com/support/SystemStatus/

  Try:

  -Switch off and restart your router.

  Try to al, but the first actions of the following:

  - iTunes for Windows: iTunes cannot contact the server for iPhone, iPad, or iPod software update

  -Change the DNS for Google or Open DNS servers

  Public DNS - Google developers

  OpenDNS IP addresses

  -For a uninstall/reinstall iTunes user solved the problem, if you experience the problem when connectedt of computer

  -Try on another computer/network

  -Wait if it's an Apple problem

  Apple has maybe a local problem