ignore the global settings of advice

Similar Questions

• BEFSX41 1.52.16 ignores the DNS settings

  Hi all

  I think I have found quite a serious problem (for me) with the latest firmware BEFSX41 (v 1.52.16.4).

  All first Base: the router is connected directly to a cable modem and gets it's IP through DHCP. My ISP uses DNS servers who harvest unknown DNS names and redirects them to a server which offers suggested sites. The biggest problem is that it can return a public IP address when you are looking for a name for a server in my VPN and causes all my VPN traffic get routed to public IP addresses.

  The solution is to configure the router to use (sometimes provided by my ISP) DNS servers that do not have this behavior. This worked great by setting these servers on the settings page in the BEFSX v1.52.10.

  The problem occurred when I updated the firmware (hoping it would fix more problems than he solved) to version 1.52.16. The new version now does not take into account the configured DNS settings and always use the assigned DNS servers DHCP protocol.

  My question is therefore of two parts:

  1. Where can I find a (reliable) download of the 1.52.10 firmware, so I can get my VPN works again? Or is there a better version of firmware I should use that would have this problem fixed?
  2. What is the best way to ensure Linksys is aware of the issue, so that I can get fixed in the next update?

  Thank you!

  According to what features are most important to you, new firmware on the router is certainly not always better!

  Here is a place where to try for your BEFSX41:

  http://BEFSX41.flogator.org/doku.php?id=stock

  Anyone no matter what firmware for the BEFSR41 v4.3 that allows traffic logging feature to actually exit traffic data?

  See you soon!

• Why the proxy settings are not respected

  I set up SSH as a proxy server on my laptop when I'm on a public network and configure Firefox to use the proxy by completing the manual Proxy config.

  If SSH doesn't work, I get this error message as expected: "the proxy server refuses connections" when I try to access any website EXCEPT Google.

  Searches on Google and access Google.com still works, even when the proxy server is not up. That seems broken.

  When the proxy server IS up, Google searches do not appear to use it.

  Google is my default search provider. If I try to access Bing, Firefox is behaving as expected (no access when proxy is out, throw up debugging indicating new connections when the proxy is up). If I change from Bing to be default search provider, the behavior of the two remains the same (proxy will use Bing, Google does not work).

  Why access to Google (and only Google?) ignore the proxy settings? Are there other sites of 'magic' that would also ignore the proxy? I use the proxy because I want to protect my internet traffic when I'm on public networks, if Firefox can randomly ignore them for some sites but not others, how can I trust him?

  My configuration problem. I realized that any site that uses https worked, while others are not.

  Somehow the "use this proxy server for all protocols" got unchecked. Audit, it solves the problem.

• view is ignoring the advice

  I use Oracle 10 g R2.

  I want advice to a view, but they are not honored.

  CREATE VIEW V AS
       SELECT DT.UNIQUE_ID,
              DT.INFO_ID AS BATCH_REFERENCE,
              DT.INSTRUCTION_ID AS TR_REFERENCE,
              DT.TOTAL_TRANSACTION_NO AS NO_OF_TRANSACTIONS,
         FROM    MY_PAYMENT DT JOIN MY_STATUS ST
               ON DT.BATCH_STATUS = ST.STATUS;
  

  Now when I run the query below, then tips are ignored. However if I switch the indicator INDEX directly in the SELECT above in the view definition, tips are honored.

  SELECT /*+ INDEX(V.DT) */ * FROM V
  

  Can you help me?

  Elya wrote:

  So, what is the purpose underlying using a HINT to force an index scan?

  In fact, the work of collecting statistics takes more than 16 hours to complete. The reason why most of the time, the generated plan are not optimized to the lack of up-to-date statistics.

  In this case try to sidestep the real problem for help is not a good idea for me. Any ways, you will need to use the GLOBAL INDICATION when you use the VIEW.

  Oracle it documented in detail. You can read it here

  http://docs.Oracle.com/CD/B19306_01/server.102/b14211/hintsref.htm#i22065

  Below is a simple example using the table EMP and DEPT.

  Here's the view

  SQL > create view v
  2 as
  3 select d.dname, e.ename
  e emp 4 join dept d
  5 we e.deptno = d.deptno;

  Created view.

  Now plan for the query with and without suspicion

  SQL > explain the plan for
  2. Select e.ename, d.dname from emp e join dept d e.deptno = d.deptno;

  He explained.

  SQL > select * from table (dbms_xplan.display);

  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------
  Hash value of plan: 14164142

  ----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |         |    11.   242.     4 (25) | 00:00:01 |
  |   1.  THE MERGE JOIN.         |    11.   242.     4 (25) | 00:00:01 |
  |   2.   TABLE ACCESS BY INDEX ROWID | DEPT |     4.    52.     1 (0) | 00:00:01 |
  |   3.    INDEX SCAN FULL | DEPT_PK |     4.       |     1 (0) | 00:00:01 |
  |*  4 |   JOIN TYPE.         |    11.    99.     3 (34) | 00:00:01 |
  |   5.    TABLE ACCESS FULL | EMP |    11.    99.     2 (0) | 00:00:01 |
  ----------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  4 - access("E".") DEPTNO "=" D ". ("' DEPTNO ')
  filter ("E". "DEPTNO"="D" "." " DEPTNO')

  18 selected lines.

  SQL > explain the plan for
  2 Select / * + INDEX (emp_pk e) * / e.ename, d.dname e emp join dept d on e.deptno = d.deptno;

  He explained.

  SQL > select * from table (dbms_xplan.display);

  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------
  Hash value of plan: 2399836226

  -----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  -----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |         |    11.   242.     3 (34) | 00:00:01 |
  |   1.  THE MERGE JOIN.         |    11.   242.     3 (34) | 00:00:01 |
  |   2.   TABLE ACCESS BY INDEX ROWID | DEPT |     4.    52.     1 (0) | 00:00:01 |

  
  |   3.    INDEX SCAN FULL | DEPT_PK |     4.       |     1 (0) | 00:00:01 |
  |*  4 |   JOIN TYPE.         |    11.    99.     2 (50) | 00:00:01 |
  |   5.    TABLE ACCESS BY INDEX ROWID | EMP |    11.    99.     1 (0) | 00:00:01 |
  |   6.     INDEX SCAN FULL | EMP_PK |    11.       |     1 (0) | 00:00:01 |
  -----------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  4 - access("E".") DEPTNO "=" D ". ("' DEPTNO ')
  filter ("E". "DEPTNO"="D" "." " DEPTNO')

  19 selected lines.

  Now plan for the query on the view with and without suspicion

  SQL > explain the plan for
  2 Select * from v;

  He explained.

  SQL > select * from table (dbms_xplan.display);

  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------
  Hash value of plan: 14164142

  ----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |         |    11.   242.     4 (25) | 00:00:01 |
  |   1.  THE MERGE JOIN.         |    11.   242.     4 (25) | 00:00:01 |
  |   2.   TABLE ACCESS BY INDEX ROWID | DEPT |     4.    52.     1 (0) | 00:00:01 |
  |   3.    INDEX SCAN FULL | DEPT_PK |     4.       |     1 (0) | 00:00:01 |
  |*  4 |   JOIN TYPE.         |    11.    99.     3 (34) | 00:00:01 |
  |   5.    TABLE ACCESS FULL | EMP |    11.    99.     2 (0) | 00:00:01 |
  ----------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  4 - access("E".") DEPTNO "=" D ". ("' DEPTNO ')
  filter ("E". "DEPTNO"="D" "." " DEPTNO')

  18 selected lines.

  We now use GLOBAL TABLE HINT

  SQL > explain the plan for
  2 select / * + INDEX (@SEL$ 2 emp_pk e) * / * v;

  He explained.

  SQL > select * from table (dbms_xplan.display);

  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------
  Hash value of plan: 2399836226

  -----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  -----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |         |    11.   242.     3 (34) | 00:00:01 |
  |   1.  THE MERGE JOIN.         |    11.   242.     3 (34) | 00:00:01 |
  |   2.   TABLE ACCESS BY INDEX ROWID | DEPT |     4.    52.     1 (0) | 00:00:01 |
  |   3.    INDEX SCAN FULL | DEPT_PK |     4.       |     1 (0) | 00:00:01 |
  |*  4 |   JOIN TYPE.         |    11.    99.     2 (50) | 00:00:01 |
  |   5.    TABLE ACCESS BY INDEX ROWID | EMP |    11.    99.     1 (0) | 00:00:01 |
  |   6.     INDEX SCAN FULL | EMP_PK |    11.       |     1 (0) | 00:00:01 |
  -----------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  4 - access("E".") DEPTNO "=" D ". ("' DEPTNO ')
  filter ("E". "DEPTNO"="D" "." " DEPTNO')

  19 selected lines.

  SQL >

• I can't open attachments ._DOC. I tried combining write, wordpad and othereswith without success. I refused access to iexpl because of security settings. I have no WORD from the Office of M. advice?

  I can't open attachments ._DOC. I tried combining write, wordpad and others without success. I refused access to iexpl because of security settings. I have no WORD from the Office of M. advice?

  You must change the extension of the name of _DOC in just DOC. Then you will need a program to open the file; the free Word Viewer, as well as a compatibility pack, if needed, should do the job. How to obtain the latest Word Viewer

• Deselection of voice on improvement in Inspector restores the default settings.

  Voice more improvement is a combo of compressor, deEsser, and EQ sound effect. I changed the settings, but when I deselected the effect in Inspector (clicked on the little blue box) to ignore the settings then changed the effect... all the settings changed back to their default values (except for the 'Quantity' slider). This isn't how it's working. Deselection of effect should work as a derivation not a reset. If someone else can confirm this?

  This happens even to the VOE effect when saving file > save Audio effects presets, inserted on clip, unchecked then reselected in the Inspector.

  John

  10.10.4 yosemite

  10.2.3 FCPX

  I see the same thing. I agree that it is not normal.

• When I re - get the server settings, boxes I unchecked reappear checked, then how do I save my changes?

  Happens if I go in and out of the settings of the account/settings/Server tools in the same session of TB, or leaving and restarting TB.

  Please ignore the question - I found the box to save [OK]. It's from the bottom of my screen!

• How to get Firefox to ignore the status of liaison visits when printing?

  How to get Firefox to ignore the status of liaison visits when printing?

  When I print something, visited links are a different color than unvisited links.
  Is there a way to make the color even when printing?
  (without changing the story, or how things look on the screen)

  If there isn't a way to do that, how about this by adding as a feature?

  One way to do would be to create style rules customized for the printed output that hardcode the link colors for all of the printed output. Firefox supports two ways to proceed: a file userContent.css that you create in the folder settings, and a custom stylesheet applied using the Stylish extension.

  However, 'one size fits all' could lead to unreadable results or ugly on some pages. If an add-on that can do adaptive way would be better. I do not know if someone has created a.

  For sites that do not require a login and that are not personalized, you could launch the page in a private window (right click on the link > open in a new private window or copy the URL and then Ctrl + Shift + p, then paste it in the address bar and enter). Because private windows have their own history, the print should not reflect the history of your regular windows.

• I send read receipts for my test email accounts, but I don't get all the answers, I have the global on setting

  What I would really like to do is use the mailing, send later and read receipts, I do not know if these extensions will work together or not. I fixed some things in the configuration editor and define global settings to "always send" but up to now I have not anything to come back at all. My test email addresses are to GMail and yahoo.

  Hey, we all get Moody... My turn. My pet hate is the double issues. Mainly because I don't really no notice of WHO. It's not relevant to me. So I find it actually to answer me the same thing for the same person. And not always the way to wsame that the two items contain a sufficient difference that what is right for one is not good for the other. Not a problem, then I must explain why I disagree with me basically the exception.

  Curiously, people tend to think of E-mail as a thing of delivery signed type when it is really formed free that the sender can never guarantee what happened to their mail, and still less that it was delivered.

  The RFC allow delivery status notifications. Most of the servers were turned off to control spam see http://en.wikipedia.org/wiki/Backscatter_%28email%29. Read even notification are controlled by the client of the recipient (except in the case of Enterprise Server). Thunderbird default is to ask if you want to send a. My experience is most people go how to turn off after they get the first request. The actual result is that they are subject useless as the only people who return them do not need to.

  Configuration of your test in Thunderbird addresses should get the query to return a read receipt, as it is a part of the header as such, e-mail client know he asked. If this isn't maybe there is a bug in the software.

• It is a way to password protect the Panel options of access, including the connection settings?

  Is there a way that access to the Options panel can be locked by an administrator. In particular, I would like to block a user to change the proxy settings in tools > Options > advanced > network > connection settings. I would like to be able to lock the settings to (use the system proxy settings). The OS is windows 7 standard user account controlled by a small business to windows 2008 Server.

  If you get the α error reading failure then it means that there is a problem with the file to mozilla.cfg or Firefox can't find the file that you may have created mozilla.cfg.txt where you saved the file as a text file (check the type in the properties using the context menu to see if it is a CFG file).
  
  The mozilla.cfg file must be in the main folder of the Firefox program where also the firefox.exe file is located.

  You should have at least two lines in mozilla.cfg.
  
  The first line must always be a comment (/ /) because this line is ignored.
  
  The pref value depends on what you want to use for the connection parameters for the use of the system use 5 proxy settings.

  //
  lockPref("network.proxy.type", 5);

• Cannot find view in the Application settings. You want to control the brightness.

  "Control the brightness of the screen on Firefox OS
  How can I control brightness manually or automatically?

  Adjust the brightness of the display using the display function in the settings app.

     Tap the Settings app and choose Display."
  

  Above are instructions for controlling the brightness in Foxfire. The settings application appears under Options and does ' t have display. I looking in the wrong place?

  Hi TheWeav, the article you mentioned is for the new phones of filed. Is your question about one of those or Firefox on your Windows XP system?

  Versions of Firefox for desktop computers do not have a brightness adjustment. You can adjust the brightness of your display using the global setting for Windows, which may include some special on your keyboard function keys or a Windows Control Panel.

  If you want only to adjust the brightness of the pages in Firefox - to moderate the white backgrounds, for example - you could try an add-on.

  • In this thread, the NoSquint extension suggested: How to change the brightness.
  • Several independently developed modules are marked with the keyword 'brightness' and might be worth a review: https://addons.mozilla.org/firefox/tag/brightness?platform=windows

  You can find a good solution?

• I can't get on gmail, get the message about privacy settings, what are the correct settings?

  The message said that not allowing don't no cookies may be the problem but I tried on each setting I can think without results. Please tell me the correct privacy settings for gmail.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

• HP 250 G3 laptop: the profile settings of Touchpad

  Hello

  I'm unable to make persistent changes to the parameters of the touchpad of my laptop.  (Synaptics V.7.5 on PS/2 Port).  I have the latest version of the driver (April 2016).
  
  Description:
  Using of control panels > properties of the mouse > device settings > settings, I'm able to customize the behavior of the touchpad and apply the changes.  Step by step to the camera settings and clicking on the profile button, I am able to record the custom profile.
  
  These settings display the default whenever I do the following:

  • Restart the computer.
  • Use a mouse, connected to a USB port.
  • Select disable the pointing device internal when the external USB pointing device is attached.

  Also, when I select a different scheme of control panels > properties of the mouse > pointers, that parameter also do not support.

  Are you able to give me advice on how to maintain my settings?

  

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Restart the laptop.

  When windows has reloaded, bring the Synaptics setting changes you need in the usual way and save them, and then check if they are now retained after a reboot, etc.

  Kind regards

  DP - K

• How to set the power settings - Satellite Pro A10 with Win XP Pro

  I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
  I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
  The BIOS shows ' version of BIOS ACPI = 1.30.
  Can someone advice how to change the power settings please?
  Thnx.

  Dave

  Hi Dave,.

  You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

  If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

  I hope this helps, let us know how you go

  Weezle

• How to ignore the words using keyboard shortcuts

  Using Ctrl + Rt arrow usually ignores the words when you type in a free text box but FF uses this keyboard command to scroll the tabs open. Is - this customizable?

  This has happened

  Each time Firefox opened

  is by typing in a text field

  Hi Toy4Rick,
  The keyboard to switch to the next tab shortcut is Ctrl + Tab and Ctrl + PG. FF.
  See this article for more information: hotkeys - quickly perform common Firefox tasks.

  You have all the related tabs that may cause the keyboard shortcuts change? Do you have any application for the global hotkeys etc.?

  Tell us what you find.