Ignore the script InD
I'm under the cloud of the InD on w7. I can't find
a new script file. He likes his samples, but not do anything
I have put in the samples directory. I can't find
palce it will list the new file .jsx for execution.
With the help of the editor to open a new file leads to
refusal of permission to write even if the user is an administrator.
Duh.
On the scripts Panel right-click on the user folder, and then click the revelation in Solution Explorer option, put your scripts in there and they should be found
Tags: InDesign
Similar Questions
-
Malware attack of the script on the Web site
Hello
I'm a Web Designer and one of my sites was hacked recently, although the site is now clean I am concerned about malware that may have been installed on the PC of the user of the site with my own PC. The pirate has placed a script on the homepage which has opened a small iframe which connected to a website - I think THAT THIS WEBSITE IS DISTRIBUTING MALWARE OF SOME SORT so don't VISIT IT UNLESS YOU KNOW WHAT YOU're DOING - feedfaster (dot) com.
I have not noticed any problems with my PC, but one of the users of the Web site contacted us because he was afraid. He told me he worked in internet security and that the site had installed a "backdoor" on his PC. He also said 'It was a very clever attack signature that is not captured by AVG, Sbybot or MalwareBytes' and only there because of what he was going to 'trash his PC. He told me that the script has been targeted to computers running windows and Internet Explore or firefox.
I visited the site myself at the time the script was there and you click on ignore the warnings I got from my browser (as I tried to see what was going on on the site), so if there is a malware problem, I'm sure it will be on my PC. Today, I run the Microsoft Windows Malicious Software Removal Tool (Jan 2012) and also scan of Microsoft Security 1.0.3001.0 (which I downloaded today) and none of them found no problems. I also ran a scan complete wth AVG which found nothing either.
Anyone would be able to tell me if these 2 tools of Microsoft detects the malware distributed by feedfaster if she was there and if not will be updated tools to detect in the near future?
Any help or advice on this would be greatly appreciated.
Mike
Hi Mike,.
If you think that your computer is still infected with a virus, try following the steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.Brian -
I get this question during the Oracle 12 c Installer (Windows Server 2012) Network Infrastructure:
[INS 32148] The execution of the script "Install IM" on the nodes failed: [node2]
--------------------------------------------------------------------------------------------------
Action - review the log to the file "C:\Program Files\Oracle\Inventory\logs\installActions2016-02-16_02-19-24AM.log" and 'C:\App\12.1.0\grid\cfgtoollogs\crsconfig\rootcrs_ < nodename > _ < timestamp > .log' for more details if an error occurs. More details
Execution of the IM installation script is successful on the nodes: the GI run script install [nodeX1] is has failed on the nodes: [nodeX2] - PRCZ-2014 Exception details: cannot run the "C:\App\12.1.0\grid\crs\config\gridconfig.bat" command on the nodes 'nodeX2 '.
The execution status of the node failed: nodeX2
Errors
: Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params|2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. | [0 m: 2016/02/18 05:08:59 CLSRSC-363: prerequisite user during installation ignorered |] [0 m | 5:09:04 > Started | 5:09:04 > arguments 2 | 5:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe | 5:09:04 > installFence | 5:09:04 > WARNING: failed to remove imagePath, continues.] The operation completed successfully. | | 5:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node. | [0 m |] D. in C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.
Standard output
: Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. [0 m 18/02/2016 05:08:59 CLSRSC-363: prerequisite ignorered user during installation [0 m 05:09:04 > started at 05:09:04 > arguments 2 05:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe 05:09:04 > installFence 05:09:04 > WARNING: delete imagePath, continuous failed.]] The operation completed successfully. 05:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node. [0 m died at C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.
--------------------------------------------------------------------------------------------------
Anyone know?
Thank you very much in advance
Hello
Why do you have the disks with different names and of different sizes?
Node1:
C:\Users\Administrator\Desktop\grid\asmtool>asmtool-Liste
ORCLDISK1 \Device\Harddisk1\Partition1 51197 M
ORCLDISKDATA0 \Device\Harddisk2\Partition1 M 30717
ORCLDISK3 \Device\Harddisk3\Partition1 M 30717
Node2:
C:\Users\Administrator\Desktop\grid>asmtool-Liste
ORCLDISK1 \Device\Harddisk1\Partition1 51197 M
ORCLDISK2 \Device\Harddisk2\Partition1 M 51197
ORCLDISK3 \Device\Harddisk3\Partition1 M 51197
People should be equal disks are shared, aren't they?
Kind regards
Marco
-
Point to add to the script or Grep Style?
Hello
Is it possible to add a hightlight to a script? Basically, what I want to do is highlight the text and the tricky part is that the text changes size depending on the size of the file, we are working on that. I want to highlight automatically the "FOR PROFESSIONAL USE ONLY" the way that we do now is to underscore that in the menu options underscore: say my font size is 8, leading 9.6 (these will always change).
Weight: = 9.6
Shift: = - 8*.33
Color = yellow
It's the way we do now. Can it be scripted or Grep style which will automatically do this for certain lines of text only? And no matter the font size calculate what he needs to do if its 2pt, 10pt 100 PT etc... It will highlight the text specified correctly?
I hope it's possible...
Thank you
The lower one is best.
I remove a bug and also if not 'what' is provided to the point function culminating and there is no entry in find it which is the find panel of text and text is selected, then this text is highlighted.
An idea in the script is that a shortcut can be applied to it and it will get its information from the Panel of text search.
So for now to change the answer to this one
// Highlight function by Trevor // http://creative-scripts.com // Custom Scripts for Adobe InDesign, Illustrator and a lot more // Beta Version 1 // https://forums.adobe.com/message/8898663#8898663 function highlight(what, color) { var range, s, doc; doc = app.properties.activeDocument; if (!doc) { return 'No Active Document'; } s = app.selection && app.selection[0]; range = (s && s.properties.underline !== undefined && s.characters.length) ? s : doc; app.doScript(f, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, 'Highlight Text'); function f() { var finds, find, l, leading, pointSize, currentChangeProps; color = color || app.activeDocument.colors.itemByName('Yellow'); // Store current find change text settings currentFindTextWhat = app.findTextPreferences.findWhat; currentChangeProps = app.changeTextPreferences.properties; what = what || currentFindTextWhat; if (what !== '') { // if no what is provided then the current entry in the find text panel will be used app.findTextPreferences.findWhat = what; app.changeTextPreferences.changeTo = ''; app.changeTextPreferences.underline = true; app.changeTextPreferences.underlineColor = color; finds = range.findText(); range.changeText(); l = finds.length; while (l--) { find = finds[l]; leading = find.leading; pointSize = find.pointSize; leading = pointSize * find.autoLeading / 100; find.underlineWeight = leading + 'pt'; // This is presuming that font and leading size is set to points! find.underlineOffset = (pointSize - leading) * 1.5; // The 1.5 might need tweaking but seems to work well } app.findTextPreferences.findWhat = currentFindTextWhat; app.changeTextPreferences.properties = currentChangeProps; } else if (range !== app.activeDocument) { leading = range.leading; pointSize = range.pointSize; leading = pointSize * range.autoLeading / 100; range.underline = true; range.underlineColor = color; range.underlineWeight = leading + 'pt'; // This is presuming that font and leading size is set to points! range.underlineOffset = (pointSize - leading) * 1.5; // The 1.5 might need tweaking but seems to work well } } } /*************************************************************************************************************************************** ** If text is selected then the "highlighting" is only applied within the selected text ** ** Otherwise the "highlighting" is applied within the whole document ** ** One could change this to apply to what ever is selected in the Find text document if one wanted to ** ** To highlight the word(s) in the find text panel just use highlight(); or highlight(undefined, app.activeDocument.swatches[5]); ** ** One can use highlight('Foo'); to highlight "foo" and ignore what's in the find text panel ** ** The formating / styles etc. for the find are taken from the find panel ** ** If one provides a swatch as the second argument highlight(undefined, app.activeDocument.swatches[5]); that swatch will be used ** ** otherwise yellow will be used ** ** If one provides a swatch as the second argument highlight(undefined, app.activeDocument.swatches[5]); that swatch will be used ** ** If text is selected and what argument is given and the find what in the find panel is empty then the selected text is highlighted ** **************************************************************************************************************************************/ highlight();
-
How to ignore any script error in my .jsx
Hi, I'm really a specific jsx who works only with a specific .aep. So when I run the script without opening .aep, ExtendScript Toolkit send me to this window and I want to ignore all errors or skip a line of the error and send an alert inside sequelae. How can I do? inside my .jsx.
My first GUI Structure of Panel is the classic "David Torno" sharing online:
(I'll share all of the code because that is too lines of code)
{
function myScript (thisObj) {}
function myScript_buildUI (thisObj) {}
var myPanel = (thisObj instanceof Panel)? thisObj: new window ("palette", "Panel Estudio Voraz", (10, 10, 300, 300) and not defined, undefined, {resizable: true}, {without borders: true} ");
myPanel.layout.resize ();
res = "group {orientation: 'column', margins: a spacing of 0: 0,------}»
myTabbedPanel: Panel {type: 'tabbedpanel'------}
myTab1: Panel {type: "tab", text: "OpenTag"------}
topImgGrp: Panel {type: "panel", text: ",}
myIconButton: IconButton {text: 'IconButton',},
},\
}";
CODE TOO much BLABLABLA
myPanel.grp = myPanel.add (res);
myPanel.grp.spacing = 0
myPanel.minimumSize.width = 400
Return myPanel;
}
var myScriptPal = myScript_buildUI (thisObj);
If ((myScriptPal! = null) & & (myScriptPal instanceof window)) {}
myScriptPal.center ();
myScriptPal.show ();
}
}
myScript (this);
}
He said that returning the outside function:
END PANEL - NO PONER NADA ESTA LINEA ABAJO.
Return myPanel;
}
var myScriptPal = myScript_buildUI (thisObj);
If ((myScriptPal! = null) & (window instanceof myScriptPal)) {}
myScriptPal.center ();
myScriptPal.show ();
}
}
check if the project is opened
If (app.project.file == null) {}
Alert ("Please, you open project first.");
return;
} else {}
myScript (this);
}
}
-
How do I ignore the blanks/Null in mapping FDMEE
Hello team, I have a file source format below.
In it so I need to ignore the lines which is having the entity as null how do I design the data mapping in FDMEE. Please notify. I have need the lines with null to go on the target system
Account entitty year project pc SupportSystem Site 645 WE 2014 growth Pc1100 BSS Site1 655 2014 growth pc1230 Site1 656 PEUT 2014 growth Pc1234 BSS Training3 Thank you
Mouline
Hello
Do not export data, you must set the target value to IGNORE
To capture entities null (empty), you have the
mapping, but it works only with whitespaces channels not empty... However, you have several ways to achieve what you want according to your needs. For example:
-Option 1: create a script to import then empty entities are imported as white space and then use the mapping of
(see details in the Administrator's guide) to map to IGNORE -Option 2: create mappings for the valid entities, and then create a mapping rule that maps to IGNORE (this mapping rule is performed last)
-Option 3: skip lines with an empty entity in the import format. Then these lines will not be imported in FDM so you don't need to map...
-The other options...
I hope that clarifies.
See you soon
-
Is it possible to ignore the aftermath WARNING although incorrect expression is applied?
When I use the script to apply a new expression to a property, sequelae of warning goes out if the expression is false. I have what to ignore the warning
I found some information on autoFixExpressions, but it seems as if the expression is quite wrong, such as 'sdfsdfsdfsdf", the autoFixExpression unnecessary injury. I used {try {} catch ()}, but it doesn't work, either.
Also, can I apply an expression and at the same time the value of the false expressionEnabled, so after effects wound't eval expression?
I have spent a lot of time with these problems, but without result, help will be appreciated.
You can try to restore the previous expression, if an error occurs, something like
function setExpression(p, expression, restore){ var err, oldExpr; if (p.canSetExpression){ oldExpr = p.expression; if (oldExpr !== expression){ try{p.expression = expression;} catch(e){ if (restore){ try{p.expression = oldExpr;}catch(e){}; }; err = e; }; }; } else{ err = new Error("Can't set expression"); }; return err; };
But if the previous expression was already bad that you will always get a warning of EI.
Too completely turn off warnings, you can use:
app.beginSuppressDialogs ();
the value or expressions;
app.endSuppressDialogs (showErrors);
If showErrors is true, AE will show
-CS6 +: a dialogue with errors (I can't remember, maybe it's CC +)
-before: dialogue boxes as much as errors of expression...
in the contrary case, it restores silently future dialogues
Xavier
-
Clone of the drive selected only--ignore the independent record
I have a virtual machine with two drives. the first disk contains the operating system and is a standard virtual disk. The second disc is independent - persistent. I want hot Clone ONLY the OS disk and ignore the independent drive. I have a Powershell script that will clone a virtual machine, but I need to know how to jump the independent drive.
It seems that it is possible to copy a vmdk selected a virtual computer on the ground, but I need to be able to make a clone of hot. Is this possible via Powershell?
Here is the code for the loop. Replace # DO comment on the line and everything up to the # clean comment by the following
## DO IT -- NOTE that CopyVirtualDisk_Task is 'experimental' as of vSphere 4.0 GA $taskMoRef = $vdiskMgr.CopyVirtualDisk_Task($sourceDS, $sourceDC, $destDS, $destDC, $destSpec, $force) $task = Get-View $taskMoRef $info = get-task | where {$_.id -like "*-"+$task.info.key} while ($task.Info.State -eq "running" -or $task.Info.State -eq "queued") { sleep 10 $info = get-task | where {$_.id -like "*-"+$task.info.key} $task = Get-View $taskMoRef Write-Host "Task" $task.info.state "," $info.percentcomplete "% complete." } } }
-
Ignore the error and continue the pl/sql block
Dear all,
Please help me to fix the script below.
I had an obligation to write a pl/sql that will handle the update instructions.
For example:
A table that contains 10 rows of data. Through pl/SQL block, I update the 10 rows (or a smaller number of lines).
Now, the scenario is by updating registration / line 4, oracle has met an error and then oracle leave pl/sql block and cancel the transaction.
My requirement here is, by updating the records, if oracle encounters an error, it must raise an error or ignore the record and continue to process records. Oracle wouldn't pl/sql block.
We are using oracle 10g.
Thank you
KODSAs has already been suggested, you might check DML ERROR LOGGING
-
How to ignore the local data store...
Hello LucD and other experts, script
I have a script that gives me the list of the data stores, total, used and free size and accessibility. That's out of all types of data, such as Aboriginal, SAN and NFS storage... I took leave of the NFS share... I'm looking to see if there is possibility to ignore local warehouses of data in the list...
The script is attached. Help, please!
Kind regards
VMSavvy
Change this line
$datastores = get-vmhost | Get-Datastore. Sort-Object Name
in this
$datastores = get-vmhost | Get-Datastore. where {$_.} Extensiondata.Summary.MultipleHostAccess} | Sort-Object Name
-
See the script generates names of different columns... not even when view desc
When I describe myself I think I get the following columns
voucherdetail / / DESC
Name of Type Null
------------------------------ -------- ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SERIAL_NUMBER NOT NULL VARCHAR2 (20)
SECRET_CODE NOT NULL VARCHAR2 (100)
STATUS VARCHAR2 (2)
NUMBER OF FACE_VALUE
NUMBER OF CALL_VALUE
CREATION_DATE DATE
VALIDITY_EXTENSION_PERIOD NOT NULL NUMBER (5)
DATE OF VOUCHER_EXPIRY_DATE
NUMBER OF TAX_AMOUNT
NUMBER OF MISC_CHARGE
NUMBER OF OTHER_CHARGE
BATCH_NO VARCHAR2 (10)
DATE OF LAST_MODIFIED_DATE
LAST_MODIFIED_BY VARCHAR2 (25)
DATE OF REDEEMDATE
DATE OF ACTIVATIONDATE
WHEN I GENERATE MY VIEW SCRIPT GET THE SCRIPT ACCORDING TO:
CREATE VIEW VOUCHERDETAIL AS SELECT PinSeq, a.Account_id, a.Status,
(SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B.)
WHERE A.charge_id = B.charge_id
AND B.CHARGE_WHEN = 'A' - RATED VALUE
AND WETODATE IS NULL
AND CHARGESHEETCODE = b.CHARGESHEETNO
) FACE_Value,.
(SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B.)
WHERE A.charge_id = B.charge_id
AND B.CHARGE_WHEN = 'B' - CALL VALUE
AND WETODATE IS NULL
AND CHARGESHEETCODE = b.CHARGESHEETNO
) Call_Value,.
NVL (A.LAST_MODIFIED_DATE, A.CREATED_DATE) CREATED_DATE, EXPIRYDAYS, NVL(A.EXPIRYDATE,B.EXPIRYDATE) DISPLAYED,
(SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B.)
WHERE A.charge_id = B.charge_id
AND B.CHARGE_WHEN = 'Q' - AMOUNT OF TAX
AND WETODATE IS NULL
AND CHARGESHEETCODE = b.CHARGESHEETNO
) Tax_AMOUNT,.
(SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B.)
WHERE A.charge_id = B.charge_id
AND B.CHARGE_WHEN = 'H' LOAD - MISC
AND WETODATE IS NULL
AND CHARGESHEETCODE = b.CHARGESHEETNO
) VARIOUS,.
(SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B.)
WHERE A.charge_id = B.charge_id
AND B.CHARGE_WHEN = 'X' - ANOTHER LOAD
AND WETODATE IS NULL
AND CHARGESHEETCODE = b.CHARGESHEETNO
) OTHER_CHARGE, a.swhBatchcode, a.LAST_MODIFIED_DATE, a.LAST_MODIFIED_BY, a.ATTRIBUTE_DATE1, a.ATTRIBUTE_DATE2
Mst_PINDetails a, mst_batchno b
WHERE a.swhBatchcode = b.swhBatchcode
ORDER BY PinSeq;
WHAT I SEE, IT IS THE NAMES OF COLUMNS THAT ARE DISPLAYED WHEN I DESCRIBE MY VIEW OR RUN MY QUERY ON THE VIEW, OR NOT THE SAME IN THE SCRIPT THAT I GENERATE... DUE TO WHICH MY APPLICATION FAILS FRONTEND WHEN I RUN MY REPORT ON THIS POINT OF VIEW
WHY IS THAT IT IS SHOWING DIFFERENT COLUMN NAMES?How can you generate your view script? Which tool?
For example, if you use TOAD, then check your script options. You can miss a check mark in the setting "columns".
It might be, that if you put the check mark in the "columns" setting, then your script is as follows:CREATE VIEW VOUCHERDETAIL ( SERIAL_NUMBER, SECRET_CODE, STATUS, FACE_VALUE, CALL_VALUE, CREATION_DATE, VALIDITY_EXTENSION_PERIOD, VOUCHER_EXPIRY_DATE, TAX_AMOUNT, MISC_CHARGE, OTHER_CHARGE, BATCH_NO, LAST_MODIFIED_DATE, LAST_MODIFIED_BY, REDEEMDATE, ACTIVATIONDATE ) AS SELECT PinSeq, a.Account_id, a.Status, (SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B WHERE A.charge_id = B.charge_id AND B.CHARGE_WHEN='A' --FACE VALUE AND WETODATE IS NULL AND CHARGESHEETCODE =b.CHARGESHEETNO ) FACE_Value, (SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B WHERE A.charge_id = B.charge_id AND B.CHARGE_WHEN='B' ----CALL VALUE AND WETODATE IS NULL AND CHARGESHEETCODE =b.CHARGESHEETNO ) Call_Value, NVL(A.LAST_MODIFIED_DATE, A.CREATED_DATE) CREATED_DATE, EXPIRYDAYS, NVL(A.EXPIRYDATE,B.EXPIRYDATE) EXPIRYDATE, (SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B WHERE A.charge_id = B.charge_id AND B.CHARGE_WHEN='Q' --TAX AMOUNT AND WETODATE IS NULL AND CHARGESHEETCODE =b.CHARGESHEETNO ) Tax_AMOUNT, (SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B WHERE A.charge_id = B.charge_id AND B.CHARGE_WHEN='H' --MISC CHARGE AND WETODATE IS NULL AND CHARGESHEETCODE =b.CHARGESHEETNO ) MISC, (SELECT A.CHARGEAMT FROM MST_CHARGESHEET A, MST_CHARGE B WHERE A.charge_id = B.charge_id AND B.CHARGE_WHEN='X' --OTHER CHARGE AND WETODATE IS NULL AND CHARGESHEETCODE =b.CHARGESHEETNO ) OTHER_CHARGE, a.swhBatchcode,a.LAST_MODIFIED_DATE ,a.LAST_MODIFIED_BY, a.ATTRIBUTE_DATE1,a.ATTRIBUTE_DATE2 FROM mst_PINDetails a, mst_batchno b WHERE a.swhBatchcode = b.swhBatchcode ORDER BY PinSeq;
CREATE VIEW statement supports explicitly naming them columns. If they are named like that, then the query name/alias columns are ignored.
-
Unable to run the script in catsem11i.sql
Hello
I wanted to use Oracle 11 GR 2 Semantic Technologies to store the RDF files in the database.
I read on the forum to activate the Sematic Technologies, I need to run the catsem11i.sql script.
For some reason I'm not able to run the script.
Here's what I did:
I have connected to SQL as System and typed: *@C:\app\User\product\11.2.0\dbhome_1\md\admin\catsem11i.sql*
Here's what I got:
SQL > @C:\app\User\product\11.2.0\dbhome_1\md\admin\catsem11i.sql
installation 11 RDF
PL/SQL procedure successfully completed.
No errors.
+: script_name1: = dbms_registry.nothing_script +;
*+
ERROR on line 14:
ORA-06550: line 14, column 22:
PLS-00201: identifier 'DBMS_REGISTRY' must be declared.
ORA-06550: line 14, column 5:
PL/SQL: Statement ignored
ORA-06550: line 15, column 22:
PLS-00201: identifier 'DBMS_REGISTRY' must be declared.
ORA-06550: line 15, column 5:
PL/SQL: Statement ignored
No errors.
Modified session.
SP2-1506: START, @ or @ command has no arguments
SP2-1506: START, @ or @ command has no arguments
Modified session.
SQL >
What I am doing wrong?
I am a student and have very basic knowledge about Oracle.
I am running Windows 7 (64-bit) Home Premium.
Published by: Bonzo on 22 April 2011 22:43
Published by: Bonzo on 22 April 2011 22:45
Published by: Bonzo on 22 April 2011 22:46
Published by: Bonzo on April 22, 2011 22:50Please connect as SYS instead of the system.
-
How to remove all the scripts on the instances of the object?
I'm looking for one any solution here, not to mention disabling the setting warn.
I hate it when I am converting someone to another project AS2 AS3 and buried on an instance on stage somewhere, that gives me the warning code:
"The actions on the button or MovieClip instances are not supported in ActionScript 3.0." All the scripts on the instances of the object will be ignored. »How can i:
Has) find what instances have code on them.
orB) delete all of the code on all instances.
Idea:
Can I save as a different format/version/something and lose data in some way. Then I could convert back the current format of the FLA?use the movie in flash Explorer to search for actionscript. whatever it is attached to an object must be removed.
-
Help: apply different styles of Pará to several consecutive paragraphs using the script
Hi all
I need to apply different styles of Pará to several consecutive paragraphs using the script, something like this (found somewhere on the net):
myDoc = app.documents var [0];
mySel var = app.selection [0];
var myPStyle1 = "A";
var myPStyle2 = 'B ';.
you need to add 6 styles here:
var myPStyle3 = 'C ';
var myPStyle4 = "D";
var myPStyle5 = 'E ';
var myPStyle6 = 'F';
var myPStyle7 = "G";
var myPStyle8 = 'H ';
the last style is not necessary in the script?
apply style 1 paragraph 1
mySel.appliedParagraphStyle = myDoc.paragraphStyles.item (myPStyle1);
apply styles to the paragraphs after selection
style 2
mySel.paragraphs [-1] .insertionPoints [-1] .appliedParagraphStyle = myDoc.paragraphStyles.item (myPStyle2);
next style
mySel.paragraphs [-1] .insertionPoints [-1] .paragraphs [0] .insertionPoints [-1] .appliedParagrap hStyle = .nextStyle myDoc.paragraphStyles.item (myPStyle2);
I tried a lot, but could not find the way to extend the sequence
Sorry, no skills in the scripts still...
all styles have "Next Style" option enabled, but I can't use ' apply style, then next style "or object styles, because I need four different sequences of these paragraph styles:
A-B-C-D-E-F-G-H
A-B-D-E-G-H
A-C-D-F-G-H
A-D-G-H
and I don't really want to create special clones of the same style for each sequence (Keep It Simple, they say ).
I think that this can be done through four slightly adjusted scripts...
any suggestions would be greatly appreciated...
Sorry to be late to the party, I usually take up such things immediately.
How about this one?
1. no separate necessary script, it uses a small dialog box where you can choose what style to use. If I'm not mistaken, you can press a digit key on Windows to immediately select one of the items.
2. it works down in the paragraph in that your cursor is located. It has nothing to do with the blocks of text, even if - consecutive paragraphs within a story always ignore the text frames.
3. extensible: you can easily change the names of the styles in the table at the top of the page and the number of groups of style in the list.
var styleLists = [ [ "A", "B", "C", "D", "E", "F", "G", "H" ], [ "A", "B", "D", "E", "G", "H" ], [ "A", "C", "D", "F", "G", "H" ], [ "A", "D", "G", "H" ] ]; var radiobutts = []; styleDialog = app.dialogs.add ({name:"Set Multiple Styles",canCancel:true}); with (styleDialog) { with (dialogColumns.add()) { with (radiobuttonGroups.add()) { for (i=0; i
-
Number of words - ignore the numbers and symbols
Hi guys,.
can someone tell me how to ignore the numbers and symbols by adjusting the script below, that is, just count the letters in an entire document.
myDoc = app.activeDocument
h = 0
for (var j = 0; myDoc.stories.length > j; j ++) {}
h = myDoc.stories [j].words.length + h
}
Alert ("You have" + h + "words in this document")
See you soon,.
Samuel
In CS3 and later versions, you can use this:
app.findGrepPreferences = null;
app.findGrepPreferences.findWhat = "[\\u\\l][-\\u\\l]+";].
found = app.documents [0] .findGrep ();
Alert ("You have" + found.length + "words in this document.")A "word" is defined here as any string of uppercase and lowercase letters and hyphens. It's perhaps too strict, but you can change the GREP to meet your needs.
Peter
Maybe you are looking for
-
Hello! I have a U2415 monitor and I noticed that pressing the button the left most (even if the menu is not displayed) always produces a service menu. Read the en.community.dell.com/support-forums/peripherals/f/3529/t/19622829 post, looks like it sho
-
Download Outlook Express on my new computer with Windows 7?
Download outlook express on my new computer using windows 7? How? Original title: outlook express & windows 7
-
No ho audio in internet, mi potete help? Grazie
-
Hello I have a Samsung 46C8700 led tv being dlna capable. I use Windows 8 Pro and I can easily broadcast video from the Explorer file to my Samsung TV using "Play To" File Explorer or media player. It's really amazing because it instantly plays the v
-
Application with no standardized and the stress of missing foreign key in database
Hi allWe bought Asset Tracking System of a local company. They developed in Oracle Developer Suite 6i Asset Tracking System and database is Oracle 10g in the Ms Windows environment.the database provided by the company had a problem. I send the compan