Similar Questions

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

• Dreamweaver 8.0.2 & quot; Position & quot; Problem with WebDav

  Dreamweaver 8.0.2 'Put' problem with WebDav
  
  In Dreamweaver:
  I am able to see all the local files, and I can see all the files in the remote control. So here's the kicker... "Dreamweaver is only allowing me"Read"access" depending on the distance. When I try to 'Put' files on the server, I get an error indicating the failure of the option could... "Access denied" I use the same exact references in DW8 with WebDav.
  
  In Windows:
  In Windows (my network places), I use 'Web folders' Windows XP to display a window of the Explorer of my files from remote servers. Read, write, modify, delete works very well since Windows "web folders". I'm sure that 'web folders' are an example of a WebDAV client. When I access the file (remote) server through Internet Explorer 7 and Internet Folers (WebDav client) I can write, read, edit, delete.
  
  What we tried:
  -We give full access. Still does not work.
  -We have updated Dreamweaver to DW8.0.2 and it still won't work.
  
  
  Looks like an error message in Dreamweaver {Background file activity - detail}
  Started the: 02/05/2007-16:07
  
  Lean\5S\default.aspx - error occurred - year HTTP error occurred - cannot put default.aspx. Access denied. The file exists may not, or there could be a permission problem.
  
  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.
  
  Files with errors: 1
  Lean\5S\default.aspx
  
  Finish: 02/05/2007-16:07
  
  ________
  
  Here, any help would be appreciated!
  Is it a question of rights of Windwos, Microsoft IIS problem or dreameaver?
  Help... Help... HELP - thanks.
  

  We found the answer... We must remove the extension in IIS. In IIS, you must go to the IIS application configuration > Home Directory Configuration... > App Mappings > remove used Extensions. By removing the ASP, ASPX and APP SHTML extension mappings, we were able to upload files to the site.

  Web site 2: establishing a second IIS website devoted management WebDAV requests. Read point # 3 *.
  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19095

  This is the size of the text of the article.
  Disable the server from ASP script, the script ColdFusion server or another server in script, that you may be using. To do this click on the "Configuration" button... "in the screen shot above and the deletion of the appropriate DLL. This will prevent IIS to send the script server to the application for processing server-side. Someone a ColdFusion page would like to see ColdFusion pre-treated for editing code, not the resultant post-processed code HTML.

  Everything now works fine... Tech Support from Adobe phone helped us to solve this one. Thank you.

• Configuration of IIS and CF

  I just installed CFMX 6.1 on my CP local windows machine. IIS was installed prior to installation of the CF.
  The Assistant asked me if I wanted to use IIS as a Web server, and I said yes.
  
  Everything that looks like it installed well. The CFIDE is located in C:\inetpub\wwwroot that seems correct to me.
  
  However, when I try to access the administration of http://localhost:8500 / and with 127.0.01 I get a page not found.
  Am I missing something?
  I could not pull up of htm pages either, so it may be an IIS problem.
  Any help is greatly appreciated.

  Try to remove and add IIS connector using Configuration tool (start-> programs->-> ColdFusion MX Macromedia) Web server. Reconfiguration of sometimes it helps. Also if you configure IIS then you must access it by using http://localhost/ or http://127.0.0.1 without any additional ports. Port 8500 is used when installing CF with the built-in web server option.

• Cannot set the directories on systems

  Hello. I had some problems setting my directories on systems that are enrolled in our TMS. When I go through the process, nothing shows up on the endpoint (EX90). It was working fine before our migration to a new server. All the other supply (Jabber for TP) works very well. Suggestions?

  Scott

  You said that you have moved to a new server. I suspect maybe an IIS problem with the classic "unauthorized."

  First of all, check that the telephone directory on the endpoint URL is correct and accessible. You can do it from your computer in your browser:

  First close all your TMS sessions on your computer.

  Then, try this URL, change the values to support your TMS.

  http (S) :/ / ou/tms/public/external/annuaire/phonebookservice.asmx

  If you now get prompted for a password, then it is probably your problem. You should not be asked for a password here.

  If you can see the phone book service page, try the same URL on your endpoint. SSH on the endpoint as root type:

  Cisco ~ $ curl http (S) :/ / ou/tms/public/external/annuaire/phonebookservice.asmx

  What do you see here?

  Or you can just go to the SMT server, open Manager Internet Information services, expand the TMS structure and look for the tms/public folder. Click the public folder, and then select the authentication. Anonymous access must be the only enabled method.

  / Magnus

• 10 seconds on the first call to a CF-Web site

  Hey guys

  I hope that someone can finally help me here after hours of frustration trying to contact someone from Adobe who would listen to my problem...

  We intend to buy the new version of ColdFusion for our new Web server. For testing purposes, we installed the evaluation version of ColdFusion 11 and are faced with the following problem:

  First, we call all CF - web, theres a 10-second delay! After this period, you can see the Web page routinely. After an hour do not visit the page there is the same problem again.

  My first try to get more information on what could cause this problem, was looking to demand with the feature IIS "Failed Request Tracing. In these logs files, I found after the entry:

  

  

  So what can I do to solve this problem?

  Greetings from the Switzerland

  Nico Merz

  PS: More information on how to search for detailed information to a slow query or failed, you can find on my blog IIS-problem mithilfe einer Ablaufverfolgung debug: nicomerz.ch (in German!)

  Hi Nico,

  Make sure that, after you apply the update, you have reconfigured the connector.

  And also ensure that, before the reconfiguration of the connector, you take a backup of the previous connector folder, as CF will retain any changes you have done on the file/properties of connector.

  Once reconfigured, please check once more and let us know.

  Thank you

  Milan.

  The CF team.

• cfheader and statuscode

  I have a page for the performance of a web service using SOAP (sorry if my terminology is redundant). Everything works fine until I have to attempt to transfer a SOAP fault with a http status code response. If I return the XML SOAP indicating the fault, works very well. If I simply add < cfheader statuscode = "500" statustext = "You broke it." / >, I find myself with my SOAP xml document prefixed with html showing the text of the user of the error 500:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"

  < title > 500 - internal server error. < /title >

  < style type = "text/css" >

  <!--

  Body {margin: 0; do-size: .7em; do-family: Verdana, Arial, Helvetica, without serif; background: #EEEEEE ;}}

  fieldset {padding: 0 15px 10px 15px ;}}

  H1 {make-size: 2.4em; margin: 0; color: #FFF ;}}

  H2 {make-size: 1.7em; margin: 0; color: #CC0000 ;}}

  H3 {make-size: 1.2em; margin: 10px 0 0 0; color: #000000 ;}}

  #header {width: 96%; margin: 0 0 0 0; padding: 6px 6px 2% 2%; do-family: "trebuchet MS", Verdana, without serif; color: #FFF;}

  background-color: #555555 ;}

  #content {margin: 0 0 0 2%; position: relative ;}}

  . Content-Container {background: #fff; width:96%; margin - top: 8px; padding:10px; position: relative ;}}

  ->

  < / style >

  < / head >

  < body >

  < div id = "header" >

  Server error < h1 > < / h1 >

  < / div >

  < div id = "content" >

  < div class = "content-container" >

  < fieldset >

  < h2 > 500 - internal server error. < / h2 >

  < h3 > there is a problem with the resource you are looking for, and it cannot be displayed. < / h3 >

  < / fieldset >

  < / div >

  < / div >

  < body / > < / html > <? XML version = "1.0" encoding = "utf-8"? >

  " < envelope soap: xmlns:soap = ' http://schemas.xmlsoap.org/SOAP/envelope/ "container =" " http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance ">

  < soap: Body >

  < soap: Fault >

  Client: soap < faultcode > < / faultcode >

  < faultstring > server did not recognize the value of SOAPAction HTTP header: FastRezBookReservation. < / faultstring >

  < detail / >

  < / soap fault: >

  < / soap: Body >

  < / envelope soap: >

  Starting by the ' <? XML... "is the text that I got out. All the stuff before IIS or ColdFusion generously prefixed to me. How to stop the madness? I use IIS 7.5 and CF 9.0.2.

  Found the problem. Nothing to do with ColdFusion, it was a configuration of IIS problem requiring a tweak of the httperrors section web.config. In case someone has a similar problem, this is where I found the solution: iis - how to remove the error messages - IIS7 - stack overflow

• IIS and sql server 2000/2005 if problems ip address and host name changed

  Windows Server 2003, IIS 6.0 + SQL SERVER 2000/2005

  Is there a problem if ip address and host name of the server is changed?

  for example

  IIS 6.0 may still work properly?

  SQL Server 2000/2005 can still start correctly?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Problem adding iis to XP that's been upgraded to SP3

  Hello

  I have an old Win XP Pro sp3 machine.  I would like to install IIS on it.  I tried to do this in Control Panel, but I asked myself to provide the cd of Win XP SP3 for the staxmem.dll.

  However, I do not have a CD of XP SP3, the OS was initially SP1 or SP2 (I can't remember which).  I have the CD of the OS was originally installed from, but apparently the staxmem.dll version is on it has been replaced in SP3.  What are my options?  If I continue the installation without the dll, the operating system will download at a later date?  I guess I could create a slipstreamed CD, but it's kind of a pain, I've done once before.

  -Eric

  Hello
  
  You can also use the file from the i386 folder. Read the article below and check if this helps you resolve the issue. The article below is God for Windows XP service pack 3.
  You may receive the error message "Setup cannot copy the file staxmem.dll" when you try to install IIS on a computer that is running Windows XP Professional with SP2
  http://support.Microsoft.com/?ID=894351
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• IIS installation problems

  I need to install IIS on my Windows Vista Home Premium.I don't get no directory structure when I click on turn Windows Features turn off/on. It shows the Virgin in this window. I have installed Xamp previously. It creates problem in the installation of IIS?

  http://learn.IIS.NET/page.aspx/479/IIS-70-features-and-Vista-editions/

  Read the above.

  http://learn.IIS.NET/page.aspx/28/install-IIS-7-on-Windows-Vista-and-Windows-7/

  You need Vista Business, Ultimate or enterprise to have full IIS 7 on Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Instailling IIS in Windows 7 problem

  I am facing problem with the installation of IIS in my new laptop having Windows7 OS.i received the error as "HTTP error 404.4 - not found " when I check if it works properly or not. but I installed correctly start-> Control Panel-> program and features-> turn on/off windows features-> tick IIS, and then click Ok.

  give the answer...

  Please refer to the following: http://support.microsoft.com/kb/942052/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• EPM 11.1.2.4 - IIS on Windows R2 2012 configuration problem

  Hi all

  I'm done installing Hyperion 11.1.2.4 on 2012 R2 in Windows version, while the configuration, I get the error below.

  

  Windows 2012 R2 comes with version 8.5 of IIS. I checked in IIS, there is 'Default Web site' and open the IIS to the Internet Explorer browser without any problem.

  I checked the matrix certification for Hyperion 11.1.2.4, that they have specified only IIS 6 and IIS 7.x for the Web and applications, server and Windows 2012 R2 for the OS but there is no exception "Server EPMA Dimension".

  Note: The configuration of IIS 7.x specify up to Windows 2008 R2.

  No someone came across the question above? Please suggest

  You have followed all the prereqs in the docs > Microsoft Internet Information Services (IIS)

  Maybe compatibility mode?

  I edited my original post because I have provided the link, but you just get people who say the same thing as the link so here's the info in the link (a single click if)

  Microsoft Internet Information Services (IIS)

  The following products require IIS must be installed with ASP.NET support is enabled before installing the EPM system product:

  • Performance Management architect Service (Server Dimension)
  • Strategic Finance
  • Data relationship management

  Notes on IIS:

  • In the Windows Server Manager, make sure that the following options are selected for the roles for the Web server (IIS):
    • ASP.NET Application developing
    • Compatibility with IIS 6 management under administrative tools (for IIS 7 and IIS 8 only)
  • If .NET is not detected, EPM System Installer installs the version required by your version of Windows.
  • On Windows 2008 and 2012 of Windows, if you configure the products requiring IIS, EPM System Configurator automatically configures the Windows Server roles required for IIS if they are not already installed.
  • If IIS is chosen as the web server during the configuration, you must allow all unknown ISAPI extensions through the Internet Information Services Manager.

  See you soon

  John

• Problems with vSphere 6.0 and IIS 8.5

  Hi all

  
  We have a very rare problem currently with IIS on a new version of vSphere 6.0.  We run 3 host ESX enterprise in a standard cluster with a standalone VCSA.

  The problems that we know are response times in IIS.  We lack an asp.net web application using ado.net to extract simple data sets in a cluster SQL from 2012.  The web server running Windows Server R2 with IIS 8.5.9600.16384 2012.  It comes to virtualized.  Our SQL servers are also running on Windows Server 2012 R2, but this is a physical cluster.  All components are updated running the latest windows patches, fixes vmware, etc.

  We have tried to limit the problem using wireshark, we noticed that speeds improved dramatically when running wireshark.  We have finally pinned it down to the NETWORK card is in promiscuous mode - mode "Promiscuous", web response times app are sub 100ms, and when we disable the promiscuous mode, response time pop up to 4 + seconds.

  I found a few articles that might put this question of vSphere RARP and NLB in unicast mode, but we do not use NLB on any of these servers, and many of our tests were performed on servers IIS "standalone".

  Someone encountered this problem before, and anyone has pointers?

  Thank you

  It looks exactly like the problem that is described in this thread:

  vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

  You also use the vmxnet3 vNIC?

  If yes are trying one of these workarounds mentioned in the other thread (I'd go with LRO to start, do not forget to restart):

  E1000E use instead of vmxnext3

  Use jumbo frames (not really good for us but can be one good option for others...)

  Disable the LRO on a VMXNET3: enable or disable LRO on VMXNET3 adapter on a Windows Virtual Machine

  Turn on LRO overall on a Windows Virtual Machine

• CF9 IIS 7.5 Application problem setting

  I currently have a race CF 9.0 Enterprise Edition running on Windows 2003 Server R2 SP2 conversion CF 9.0.2 Enterprise edition running on Windows Server 2008 R2 SP1 with IIS 7.5.

  I was able to correctly install and configure the cfadmin without problem.

  My problem is now when I try and access my web application (which resides in the same directory as the cfide folder structure).  I know this isn't a permissions issue - I wouldn't be able to get to the administrator.

  I have my web application or custom code set up as an "application" as apposed to a virtual directory.  When I try to access the application via the website, I get the following error:

  500 - error internal server.

  There is a problem with the resource you are looking for, and it cannot be displayed.

  And in IIS, under the app, I'll edit the application settings, basic, I try to "test settings" I get:

  There was error during execution of this operation. Details: path is not a valid application.

  I know that isn't true.  And I know that the permissions are correct.  I followed many instructions about the unsuccessful .net application pool settings.

  I saw on one of the blogs that someone pointed out that you need a virtual directory under the application - which is something that was not required in previous versions.  I was not able to confirm that no more.

  I could return to the IIS 6.0 Manager, but I have to re - install (they have installed and made operational only for the SMTP server).

  Any ideas?  I spent about 20 hours of work only on this...

  Thank you.

  Libby H.

  After searching for a long time, I found an article on how to get additional error information.

  In IIS 7.5, you can get errors of detail for local query - errors that occur on the client side.

  I went to my application directory in IIS and opens the selection of "Error Pages".

  From there on, I chose the 500 error I need more information.  I then click with the right button on the error (500) and choose "change the function parameters."

  The pop-up, selected "detailed errors for local requests and for requests to remote customer error pages.  I clicked OK, then stopped and restarted IIS.

  When I then tried my request - I received detailed information!

  Long story, but the point here is that the error I received while "test settings". -"Details: invalid application path."

  -I think is a false positive.  I have sent me on a wild goose chase.  I had an application (no joke) error that was fixed easily and was on my way.

• Problem installing CF8 on local IIS Server XP

  Hello
  
  I try to install CF8 developer under XP with IIS.
  
  I tried literally dozens of times and always the same result - when I go to
  
  CFIDE/Administrator ( http://127.0.0.1/CFIDE/Administrator/index.cfm)... the .cfm is not
  
  analysis and the system tries to open the file with a text editor. If I try and press on the
  
  Directory ( http://127.0.0.1/CFIDE/Administrator/) I get the message "Server error".
  
  1 > I have IIS installed no problem with default Web site settings and select as 127.0.0.1
  
  It's IP, I also tried once leaving "Unassigned".
  
  2 > I disabled and then went as far as to uninstall any antivirus, firewall etc before
  
  try to install the CF
  
  3 > I tried to remove myself from any LAN access, routers, wireless etc.
  
  4 > I tried all three boxes on the installation screen that appears asking one
  
  configuration of the server, and on the selection of radio 'specify' I tried a little different
  
  configurations of
  
  5 > I have redownloaded the thinnking of installation that maybe something was wrong with that
  
  6 > I tried to install an older version (MX) of CF bit even result.
  
  In the past (my last computer has Win 2000 Prof) I had no problem... IIS, allowed to the left
  
  settings, SEE installed by default and how I worked...
  
  Any ideas on what the Devil's going on or how can I fix this?
  
  Thank you very much! :-)

  Check your configuration in IIS to verify that ColdFusion (cfm, cfc, etc) file extensions are associated with the jrun_iis6.dll.

  In IIS, right click on your Web site and open the properties page.
  On the Home Directory tab, click the Configuration button
  Check your settings on the Mappings tab

  There are batch files installed to C:\CFusionMX7\bin\connectors\ that will automate the IIS configuration in CF7. You could look for a similar directory in CF8.

  Alternatively, you can verify that the changes made the installation of IIS is not blocked by security software.

  This link can help.
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=webservmgmt_5.html