Illustrator CC - 'less back' removes the odd parts?

Similar Questions

• How to remove the upper part of a key on a Satellite C870-C196?

  Hello

  I would like to know if it is possible to remove the upper part of a key on a TOSHIBA Satellite C870 C196 to clean underneath?

  I have a button that does not work properly.

  How to go without anything break?

  Is there a specific tutorial for this projection keyboard how?

  Thanks to you all.

  Kind regards

  Tutorial so that it does not exist, but I can say, is that you can remove the plastic cap. It may be problematic to implement.
  On older machines, it was quite easy, but on the new laptops equipped with flat keys, it is not so easy. As far as I know that each CAP is fixed with 4 pretty small hat holders must be fixed properly. to put all the 4 instead is not so easy.

  I don't know what to say. You can try it, but on the other hand, I don't want to encourage that because you can damage something and in the end, you need to replace the entire keyboard.

  If there is a serious problem, you can request the service of Toshiba for advice and ask for help.

• Remove the dark part of the Image

  Hello

  I just started to work with NI VISION. I have attached an image with this post.

  Can someone tell me how I can remove the dark part in the picture? I read on the histogram, which gives a total number of pixels at each level of gray.

  But I don't know how I can use this information to improve the quality of the image, or in my case how can I use it to balance the values of pixels surrounded with the rest of the image.

  I hope I explained my problem properly.

  I found the solution to the problem. I used "Manipulation of pixels.

  If anyone has any better ideas then please share.

• remove the odd spaces of the hexadecimal string

  Hello

  I would like to remove the odd spaces to a hexadecimal string, and the output result.  That's what the input string will look like:

  01 00 04 0F FF 36 3B CC...

  I want the output to be:

  0100 040F FF36 3BCC...

  I got the attached forum labview code earlier, but it does not work with the text.

  Any help is greately appreciated.

  Thank you

  hiNi.

  Try this version 8.2.

• Everytime I open the preferences file damaged and is Illustrator CC reset back to the default and then change among other keyboard shortcuts.

  Everytime I open the preferences file damaged and is Illustrator CC reset back to the default and then change among other keyboard shortcuts.

  Thank you

  Hello

  We have published a fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• How to remove the unwanted parts of drawing black and white line

  I scanned in a flower art simple black and white lines.  I would like to remove some of the petals in Photoshop.  How can I do?

  Thank you

  I would like to remove the petals from the background.

  1 method: with the select magic wand the white bg, select-> invert the selection and create a layer mask.

  

  The layer mask is a monochrome picture, transparent black, white is opaque and anything in between is more or less transparent.

  You can now select the layer mask, use the brush and black paint, where you want to have something white, removed where you want to have something added. It is non-destructive and works very well on your photo.

  

  You can use shift click to 'draw' the small lines to attach to the top. According to the clarification, it will take more or less time. As I said are non-destructive.

  Second method: you use the pen to draw the lines around your flower vectors. With little exercise, you'll very quickly and you can always adjust the curvature of your curve, by pulling on the handles of the curve. Here you can see how it works: drawing with the pen in Photoshop tools .

  When done with the pen tool, you can add the vector line as a vector mask. You can even refine your mask after finishing. I suggest, since a mask of course work at a refined mask.

  The flower should not be on a layer, a background layer. Basemap layers have no transparency. The two methods are non-destructive, so you can return to the original image or parts of it, whenever you want.

• How to remove the extension .part downloads.

  When you download a file, Firefox will add the .part. file extension is possible to not do this?

  Firefox will automatically as .part, remove more once the download is complete. There is no way to avoid adding it.

• How to remove the upper part of the American flag to the right of the screen

  Hello

  I clicked on something that presents an American flag at the top right at the top of screen bar. I don't need a symbol that tells me that I use American English. How can I remove it?

  Thank you

  Garrett

  My son showed me. Click on the flag and then uncheck show it.

• {beginning} how to remove the inner part of a path?

  Without doubt, I am doing this completely wrong, so please point me in the right direction...

  I created a letter (closed vector pencil drawing) and the interiors of the letter in the color red.

  What I'm trying to do: I want to delete a part of colorful inside this letter now. (It is letter A, in fact, you know what I mean?)

  I can draw another circle with the pencil tool and place it inside the letter of color, but I really want to cut this part of the letter so I can see the underlying background.

  The text tool, it's not what I'm looking for.

  Thank you for any clue

  Cheers!

  Go to the online help and search for "trace".

  JET

• Move a clip back to the Panel "organize."

  PE9 bought two days ago.  It is installed and running on my iMac w/Mac OS 10.6.4.  I have some old home movies that have been converted from 8mm to < .mov > files.  The files are .mov > important PE9 organize panel OK, no problem.  The clip resulting (large - about 1 hour 30 minutes) can be moved down to the timeline and I work it in the timeline panel.  All goes well until then.

  Because I shot a variety of scenes at different times, with different themes I must necessarily divide the clip into several small clips.  By doing this I am able to separate the resulting from several clips preparatory to create their own individual film, IE my home theater can be connected between them, and my daughter family photos I would separate and then connect them together for their own film.  This is done easily using iMovie by moving the clips back up to the equivalent of the Panel organize so that they can be used later to create their own film.  However, I find that PE9 does not allow me to move mounting clips or save the Panel organize.  It's my problem.  What I am doing wrong?  What is a normal feature of PE9?

  Moving clips between the chronology/timeline save the Panel organize, it was simple and easy with iMovie.  Still, what I am doing wrong?

  Thank you... Vance

  I'm sorry you "broke down." Obviously I didn't explain better, but that's how PE9 would work for the example you gave me

  Select all the files in the Organizer PE9 and drag all the files on the timeline.

  Mark the entry points and clips from your family you want not to include in the first film

  Save a copy of the project at this stage with a new name. This will become your second film.

  Select items by clicking on the unwanted chronology part

  Tap on delete key to remove the unwanted parts, take your family. It's like dragging them towards the Organizer in IMovie

  Make the first film

  When you want to make the second film with just your family, open the copy above with edit points that you did before you delete

  Select and delete the parts you already used in the first film, leaving only your family

  Make the second film as above

  When you drag to the start the wanted all the clips to a timeline that really, you do not move the files on your computer, even though it may seem like that.

  You just tell the editor to use the file. The original files are intact.

  Dragging in IMovie are the same as the PE9 deletion. Nothing is really deleted. It is revealing that the editor will not include them in the film. Just another way to do the same thing.

  You're not really delete or move anything because the clip is not a copy of the original, just an instruction to the editor to use the part of the file.

  Then the beauty of this is that you can change your mind use a little more or less of an element without having to do dragging to the timeline because he was never really there in first place - does make sense?

• How can I remove the area outside the outline?

  I'm playing with car designs to help me learn Illustrator and I can't understand this part.  I have a model of a Scion XB 2015 and I try to spot the pieces I want.

  How can I get the outer areas to disappear?  I tried to use the pathfinder tool, but it does not work.  It removes the blue part inside the vehicle.

  Any suggestions please?

  

  Use a clipping mask.

• Illustrator cc 2014 shoot at the beginning

  Hello, I have to come to the community after several fail to solve this problem using the Service client Adobe (the worst).

  I have a subscription to the CC and CC 2014 (18.0.0) Illustrator, I downloaded on my MAC and when opening I see the Welcome screen and shoots down. I have uninsatlled and reinstalled and same problem.

  This is part of the error I get:

  Process: Adobe Illustrator [7886]

  Path: / Applications/Adobe Illustrator CC 2014/Adobe Illustrator Illustrator.app/Contents/MacOS/Adobe

  ID: com.adobe.illustrator

  Version: 18.0.0 (18.0.0)

  Code type: X 86-64 (Native)

  Parent process: launchd [281]

  Responsible for: Adobe Illustrator [7886]

  User ID: 501

  Date/time: 2014-07-10 13:35:58.085-0500

  OS version: Mac OS X 10.9.3 (13 D 65)

  Report Version: 11

  Anonymous UUID: E46555E6-E56B-6661-3611-96E26C348BC4

  Sleep/wake UUID: ACE60D85-63CE-455C-975E-BB7DAD86B5C2

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000058

  Pease I would like to know if someone is having the same problem or can anyone help?

  Thnak you.

  Pvalle

  _____

  MacPro3, 1, MP31.006C.B05 of BootROM, 8 processors Quad - Core Intel Xeon, 2.8 GHz, 14 GB

  Thank you all for your answers. Someone at Adobe finally responded and after you send the message full error that was their answer and it worked!

  Go to Applications > Illustrator CC 2014 > Plugins & remove the wacexportfile.aip.

  Also delete the folder of Wacom on the applications folder.

  Launch the application and it should work now.

  These means, can't we my Wacom pen more...

  Pvalle.

• Edit/Remove the outside computer screen into video

  I just finished a shoot and my topic had a laptop open behind him with a screensaver running.  The interview lasted about 30 minutes and went very well, but really I don't want the distraction of the screen saver in the shot and the shot of culture would ruin the Visual balance.  How can I black on the screen or something to make it less sensitive?

  Thanks in advance!

  If the arm is in front of the screen, just sometimes, you can fix that by Rotoscoping. This means animate a mask following the arms that removes the respective part of replacement of your monitor.

  For this task, the following by Eran Stern tutorial might be helpful:

  http://www.sternfx.com/blog/index.php/11-2009/pen-tool-tips/

• How to remove the drive of DVD of Tecra M3

  Have an old Tecra M3 which works, but had a defective CPU fan.

  Have managed to get and replace the fan, I came across a problem annoying when disassembly of the case.
  I could not for the life of get out me the DVD drive. According to everything I read the disc should come out just, but he wouldn't.

  I couldn't find anything (like a button or a screw) that it locked in.

  Anyone able to point me in the right direction (today more interest than anything else)?

  See you soon...
  KeV

  Hello

  The ODD on Tecra M3 is fixed with a screw on the lower side of the laptop. You must remove this screw first before you can remove the ODD.

  Underside, there is a latch to remove the ODD. To remove first the screw next to the latch, then slide the battery bay latch, then you are able to remove the ODD.

  Check this box!

• Photo Story 3-How do to remove the silent space between tracks

  I use Photo Story 3 to make a video.  I've imported all the photos and added 7 different pieces of music.  The program automatically leaves a silent space between pieces of music.  If an image has no music to accompany it.  How delete/erase this silent space for songs by each other.  Help with Photo Story 3 tells me how to add a silent space between pieces of music by selecting Silence in the list in the dialog box create a music Genre, but it don't tell me how to do the reverse.  Here, any help would be greatly appreciated.  I need step by step help, thanks.

  Thank you, I already look at this link to the frequently asked questions for photo story and has not found a solution.  I have done several video reports using photo story for windows in the past and never encountered this problem before.  There are no breaks between different songs that I added.

  =========================================
  Maybe you could use Movie Maker to edit music files...
  It has an option for file sharing.

  (FWIW... after having been edited each individual piece... you could also)
  Add all the music files to the timeline and save them as one
  single music file.)

  Import a music file in Movie Maker and drag it to the
  Audio / music. (Make sure that the file is moved all the)
  way to the left).

  Split the file and click right/remove the unwanted parts.

  When editing is finished... go... File / save movie file...
  and follow the instructions... the resulting file will be a. WMA
  Music file.

  If you are unable to import music files into Movie Maker you
  may have to convert them to the. WMA format to
  the compatible.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7 / 8)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your music files on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...