Illustrator is auto cut my placed tiff images?

Similar Questions

• Auto-hide by placing an image?

  Hello

  whenever I have put an image in illustrator, it seems be added automatic mask to the image (and is not very good). I can not change and more importantly can't remove this mask. I tried with formats and different images, and it's always the same. It's ok, when I paste from Photoshop btw. Help would be really appreciated... I feel a bit silly now

  Thank you and best regards!

  Jochen

  Check your Panel in Photoshop. It works as a photoshop path is registered as a Clipping Path. (If the path name is in outline rather than a solid text, then this is a photoshop clipping path) You can change the path, or remove his attribute of clipping in Photoshop.

• Change the color of the placed transparent images (tiff, psd, png...)

  Hello.

  I have a project with a lot of images placed. They must be transparent, because I need to produce a number of variants and quickly change the background and the color of these images. The images themselves have a unique color. I know that I could change their color in Photoshop and then place them in a group, but it would be much easier to just place a black version of them, arrange them, and then duplicate this group and change the color of the images. I can do this in Illustrator? I tried to use TIFF, png and PSD to get transparent images, but I only managed to change color in TIFF (for example) when they lacked transparency.

  Can someone help me with this? Thank you!

  You cannot colorize hair which is not flat, as you found it.

  Save an extra image is your transparency in grayscale mask. Align, and select the images and the palette of tranaparency > Popacity make mask > check Invert mask if necessary as in my example.

  

• working with the scanned tiff image

  With the help of PS CS6 on iMac (24 inch, early 2008) 3.06 GHz Intel Core 2 Duo, 4 GB 800 MHz DDR2 SDRAM, iMac, NVIDIA GeForce 8800 GS 512 MB: when you try to open a scanned tiff image, it opens sometimes directly in PS, sometimes open in Camera Raw. All works well when CR opens, but that happens only occasionally. When you open directly in PS, everything works fine for one or two images, then the following images opens not entirely - perhaps visible to 75%, the rest blank of canvas. Whenever I left the PS it can work a couple of times, and then to cut the image again. What the Hay? Is there a way to open Camera Raw directly?

  «You can select the file in the open dialog box and set "Format" "to Camera Raw".»

• Text copied from Illustrator CC 2014.1.0 pasta like Image

  I've seen similar discussions, but none of the answers are no help for me as of today.

  Background:

  I am running OS X Yosemite 10.10

  All my CC applications are updated to the (01/11/14)

  I'm also updating on all other software on my Mac

  My goal:

  Copy text in illustrator

  Stick it in the Mail and TextEdit Notes live editable text

  Results:

  Text glue as pdf or some type of an image according to the application

  What it looks like:

  

  I'll start from the beginning to avoid questions later.

  I open a new document in Illustrator.

  

  These are the settings to Clipboard in my preferences.

  Please Note - I tried all combinations of these parameters. Turn them on and off one at a time and in combination does nothing to change the final product. I have disabled them all for this example, in order to scramble the not.

  

  I type the text. I did not use a text box in this example. I just clicked on the page with the text tool and type this line. There are no additional attributes. You can see that the parameters of characters are the most basic. Yet once, please note - I tried to use a text box with the same result.

  

  I use the text tool to highlight the text, then copy the text. I do not use the selection tool to select the text and copy.

  

  This is what looks like the Clipboard. Note that the content is "text".

  If I type the text in PS (for example) and copy to the Clipboard, it says "text". However, the text that I copy off PS I can stick anywhere in the editable text.

  If I type the text in the Notes and copy to the Clipboard, it said RTF. This text can also be pasted anywhere text as editable.

  This leads me to believe that it is a problem centered on Illustrator I have experience.

  

  I click in the body of an email and paste. Seems fine, but when I try to click in the text (for example, between the words 'in' and 'Mail') I can't do.

  

  The line of words is highlighted and not editable.

  

  If I click with the right button on the image of the text line and select "Open the attachment" you can see the Clipboard pasted as uneditable text and .pdf.

  

  Interestingly, if I open a new note and try to paste the line of text, it sticks as a .pdf file but just the icon appear. Double clicking on the icon will open the text in PDF in acrobat.

  I don't have this problem until the CC2014 updates were made. I would like to know if there is something that can be done, or is this a bug in Illustrator. If it's a bug I don't want to spend time looking for workarounds. I will use another program when I know there's a lot of work to copy / paste to do. It's embarrassing for my Illustrator old files that have now issue when I open them in CC2014.

  I know that I can use the "paste and match style" but it's a force of habit to use the shortcut for paste. It is also a ridiculous change of Illustrator for the cut/paste to act that way. If indeed it was planned and not a bug, what would be the advantage?

  If someone saw the problem that I am eager to know what is happening.

  Finally, if there is no other way to solve this problem then can anyone remind me how to customize the combinations of shortcut keys in Mail, Notes, and TextEdit? I seem to remember (long ago) being able to customize certain shortcuts in some applications, but I've never done in something else that Adobe applications and even then it was CS5.

  Thanks in advance for any help!

  Hello, I finally found away around this really annoying "bug" / "Headache" If you select the text (NOT with the text with the cursor tool) then right click and select "export selection" ( http://i.imgur.com/gM0hIPR.png ) and export it to SVG ( http://i.imgur.com/QaWiOYl.png ) and then open what you export in your browser (Internet explorer, chrome ect) and you can copy the text from there ( http://i.imgur.com/YJuE8JX.png ). I was very disappointed because even to try to copy it from Adobe Illustrator into Adobe Muse all right programs would freeze and close so I think he calls a 'suite' when you can not just simply copy and paste text from one to another is a bit of a cheek. Anyway hope this helped someone out there in the world

  -Tom

• Problems placing the Image in Indesign Cs5

  A tiff image created in Photoshop in 300 DPI with 8 X 10 inch size seems much smaller when placed in indesign page. I'm not using just frames: file - place.

  Need to print to the exact size without resizing image.

  Really would appreciate your help! Have a huge point.

  When you place the file, using file > Place? If so, when the cursor turns into a thumbnail of the image you place, you by clicking once on the InDesign page, or by clicking on and dragging a box? If you click and drag, the image fits in size what ever you box drag, rather than being placed at 100%.

  If this isn't the right answer, please provide a little more information.

• TIFF images that I used in trial version are now blurred in the full version of InDesign CS5.5

  I placed two images in tiff format (Visual poems, I did) in a file (a manuscript) using a trial version of InDesign CS5.5, and they seemed crisp and clear. Then I bought the full version of InDesign (the product of education as part of Adobe Creative Suite), has opened the file, and the images two tiff are completely blurry!

  When I open the TIFF in photoshop and consider "actual pixels", they are crisp and clear. The resolution is 300. For images, I tried making a lower resolution, and that did not help.

  Any ideas? Thank you.

  First of all, if you do not see 'reply' on the web page it means that you are not connected.

  Version should have nothing to do with it, and if you actually use the same file for the link, on the same scale, the preview should be the same, assuming the same display quality setting. If you straightened the picture, however, which can cause a difference of display.

  for continuous-tone images 300 DPI should be fine. the line drawings, it is low.

• Can I resize a tiff image without using percentages?

  I placed a tiff image in a document.  I'm used to photoshop where I just use the transform tool, then shift click to resize proportionally.  have not been able to replicate this function in indd (version 5.0.4).  could only resize by changing the percentages in the boxes on the menu bar.  There must be an easier way?

  Thank you!

  Take the frame and use cmd/ctrl + shift click to resize the image AND the frame.

  Bob

• How to cut and paste the image of the body of the received email

  I'm trying to cut and paste an image included in the bottom of an email and insert it into a Word document so that you can size and print. I can highlight, cut it with Ctrl C, paste it into the document Word with Ctrl V, but the image doesn't show, although the picture frame appears when I click on the place where the photo was pasted. Framework, but empty, no image. Any thoughts?

  Thanks to everyone for their help.

  The problem has been resolved - to try and finally understand everything.

  If you encounter this problem, it is perhaps because, unless you know the file format of the inserted picture, programs can not figure it out for you. Place your cursor on the image, right click and save the image under a .jpeg instead of simply copying. Then work with the file .jpeg in any photo management program you use normally - or even insert it in Word.

• File tiff image reading Multiple with vision

  Hello

  I would read a multipage tiff file in labview and split the file in tiff image files. Since I was the Vision Toolkit I would use it to do this.  Does anyone know how?

  Thank you!

  Paul.

  Hey labJunky,

  When I open the tiff file in pictureviewer, I only could see a page and an image... But no matter, you should save the images in separate files for access in LabVIEW.

• Do you know what does DPI mean? How can I increase the resolution of a TIFF image at 300 DPI for shipment to a Publisher?

  Is anyone here know what DPI?  How can I increase the resolution of a TIFF image at 300 DPI for shipment to a Publisher?

  If the resolution is already less than 300, may not increase to make it higher. You can only do low.

  =====================================
  Yes, you can increase the DPI value.

• Hi I keep getting an error code 0 x 80070057 when opening a TIFF Image?

  I am trying to open a TIFF Image on my PC Windows Vista and get an error 0 x 80070057.

  Just this one. Is any way to fix?

  =====================================
  There are online applications that claim to repair corrupted
  photos, but I would be surprised if they work 100%.

  If you want to try to do a Google search to continue

  restoration + corrupted tiff + file

  or

  repair of corrupt tiff ++ file

  Good luck...

• EMF Tiff image conversion does not properly on Windows 7 PC

  I have a c# application that monitors the Clipboard.  When an EMF
  comes, I extract the EMF of the Clipboard data and try to
  Save offshore in a TIFF image. Everything works fine on a windows XP PC. However, when you do the conversion to grayscale, the converted image is not readable (blurry) on Window 7 PC (32-bit / 64-bit).

  I have using the standard GDI + for the conversion needs. What could be changed as the origin of the problem? Any help appreciated.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Visual c# in the MSDN forums. Please post your question in the Visual c# MSDN forum.
   
  http://social.msdn.Microsoft.com/forums/en/category/visualcsharp
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Bribery of TIFF image in windows 7

  I have an application that uses .NET 2.0 and it load a TIFF image to the file format.  In windows 7, the image is corrupted, then with XP which was not the case. The image seems to have its pixel values rounded to the intensities of hexagonal pixels (00,11,22,33... EE, ff).  This effect is also present in windows 7 paint, but other tiff viewers do not have this limitation. It seems to occur when the TIFF 8-bit photmetric mode MinIsBlack value, and it does not occur when the TIFF 8-bit has a palette.

  Jay

  Hello

  Thank you for visiting the Microsoft answers community site. The question you posted would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  I hope this helps.

• Error message on the 'open' file: 'cannot place the illustration. Could not read the tiff preview.

  To all,

  When you try to open an illustrator file I get the following error message:

  "Cannot place the illustration. Could not read the tiff preview.

  Anyone know how I can recover my document?

  Thank you

  Ian

  Version of IT? OPERATING SYSTEM?

  Does the linked graphics?

  You have several versions of the installed AI? If so, try all versions.

  Have you tried to drag the Acrobat file? Maybe he will open it.

  Just noticed you said "Can PLACE the illustration. You place instead of open by chance?