iMac 27 "mid-2011 does not start after that put 10.11.3 up-to-date.

Similar Questions

• VM does not start after that ESXi was replaced by version 6

  Hi all

  
  

  I ran a scary problem after replacing my VMware ESXi version 5.1 to version 6.

  
  

  My server is an Areca RAID controller which is supported by version 6 default. Yes, after installation (clean installation) 6 ESXi on a key USB internal drive, everthing seem good. It shows my store of data stored on my RAID controller and I can see the content, (see attachment, image of my data store) including my VM file - SBS2011.vmdk.

  
  

  I'm not a highly qualified VM pro, but the hard (about 40GB) file must contain my full Windows environment (Windows 2011 server).

  
  

  Have access to my data store on my RAID controller and access to the original .vmx file, everything seems fine. Make a right click of the .vmx, add to the inventory and I'm ready to go... but... it does not start.

  
  

  It shows a resource error, not this additional information. My feeling is that there is something wrong with the location of the Swap, because it looks like the place to swap is located outside the VM storage location (hard). This is what looks like my .vmx:

  
  

  It is not stored on my hard ' / vmfs/volumes / 512 b 5271-cb39b672-c198-001e676870c7 /! It points to a different location.

  
  

  (File VMX also downloaded with this post)
  

  
  

  No I have two question. What would be the cause of this problem, not able to start the virtual machine?

  
  

  Second question. Perhaps a solution: delete all files in my store of data, except the VM-SBS2011 - flat hard file, create a new virtual machine on my server, using an existing drive (showing my VM-SBS2011 - flat hard), I'll be able to boot my virtual machine? It will create a (work) .vmx file to the cool address? There where no snapshots exist when I close my Windows OS down the last time. I lose all the data? Help, please!

  
  

  Currently, I download the full content (all files) of the database on my local computer as a backup. I hope that my hard file will be sufficient.

  
  

  I'm really grateful for your help!

  
  

  . Encoding = 'UTF-8 '.
  config.version = '8 '.
  virtualHW.version = '8 '.
  pciBridge0.present = 'true '.
  pciBridge4.present = 'true '.
  pciBridge4.virtualDev = "pcieRootPort"
  pciBridge4.functions = '8 '.
  pciBridge5.present = 'true '.
  pciBridge5.virtualDev = "pcieRootPort"
  pciBridge5.functions = '8 '.
  pciBridge6.present = 'true '.
  pciBridge6.virtualDev = "pcieRootPort"
  pciBridge6.functions = '8 '.
  pciBridge7.present = 'true '.
  pciBridge7.virtualDev = "pcieRootPort"
  pciBridge7.functions = '8 '.
  vmci0. Present = 'true '.
  hpet0. Present = 'true '.
  NVRAM = "VM - SBS2011.nvram.
  virtualHW.productCompatibility = "hosted".
  powerType.powerOff = 'soft '.
  powerType.powerOn = "hard."
  powerType.suspend = "hard."
  powerType.reset = 'soft '.
  displayName = "VM-SBS2011.
  extendedConfigFile = "VM - SBS2011.vmxf.
  floppy0. Present = 'true '.
  numvcpus = "4".
  cpuid.coresPerSocket = "4".
  scsi0. Present = 'true '.
  scsi0.sharedBus = 'none '.
  scsi0.virtualDev = "lsisas1068".
  memsize = "12288.
  scsi0:0. Present = 'true '.
  scsi0:0. FileName = "VM - SBS2011.vmdk.
  scsi0:0. DeviceType = "scsi-disk" hard
  IDE1:0. Present = 'true '.
  IDE1:0.clientDevice = 'TRUE '.
  IDE1:0. DeviceType = "atapi cdrom.
  IDE1:0.startConnected = 'TRUE '.
  floppy0.startConnected = "false".
  floppy0. FileName = "".
  floppy0.clientDevice = 'true '.
  ethernet0. Present = 'true '.
  ethernet0.virtualDev = "e1000e.
  ethernet0.networkName = 'network of the VM.
  ethernet0. AddressType = 'generated '.
  chipset.onlineStandby = "false".
  disc. EnableUUID = 'true '.
  guestOS = "windows8srv-64.
  UUID. Location = "56 4 d fe 63 9 b 1 has c6 - ba b 0, 00 e8 6f 3rd 80 e8 7A.
  UUID. BIOS = "56 4 d fe 63 9 b 1 has c6 - ba b 0, 00 e8 6f 3rd 80 e8 7A.
  VC. UUID = "6th 52 2d 21 82 34 04 - c8 18 19 67 f8 67 c3 a5 4 d.
  Snapshot.action = 'keep '.
  SCHED. CPU.min = '0 '.
  SCHED. CPU. Units = "mhz".
  SCHED. CPU.shares = 'normal '.
  SCHED.mem.min = '0 '.
  SCHED.mem.shares = 'normal '.
  scsi0.pciSlotNumber = "160".
  ethernet0.generatedAddress = "00: 0C: 29: 7 a: e8:80.
  ethernet0.pciSlotNumber = '192 '.
  vmci0.ID = "1048242304".
  vmci0.pciSlotNumber = "32".
  cleanShutdown = 'TRUE '.
  Replay.Supported = "FALSE".
  sched.swap.derivedName = ' / vmfs/volumes/512b5271-cb39b672-c198-001e676870c7/VM-SBS2011-snapshots/VM-SBS2011-6cbed3a5.vswp '.
  Replay.FileName = «»
  scsi0:0. Redo = «»
  pciBridge0.pciSlotNumber = "17".
  pciBridge4.pciSlotNumber = "21".
  pciBridge5.pciSlotNumber = "22".
  pciBridge6.pciSlotNumber = "23".
  pciBridge7.pciSlotNumber = "24".
  scsi0.sasWWID = "50 05 05 63 9 b 1 a 6f c0.
  ethernet0.generatedAddressOffset = '0 '.
  VM. GenID = "5456487432926317901."
  vm.genidX = "901288717606574007".
  hostCPUID.0 = "0000000d756e65476c65746e49656e69".
  hostCPUID.1 = "000206d70020080017bee3ffbfebfbff".
  hostCPUID.80000001 = "0000000000000000000000012c 100800.
  guestCPUID.0 = "0000000d756e65476c65746e49656e69".
  guestCPUID.1 = "000206d700040800969822031fabfbff".
  guestCPUID.80000001 = "00000000000000000000000128100800".
  userCPUID.0 = "0000000d756e65476c65746e49656e69".
  userCPUID.1 = "000206d700200800169822031fabfbff".
  userCPUID.80000001 = "00000000000000000000000128100800".
  evcCompatibilityMode = "FALSE".
  vmotion.checkpointFBSize = "4194304".
  softPowerOff = 'TRUE '.
  tools.syncTime = "FALSE".
  bios.forceSetupOnce = "false".
  IDE1:0. FileName = "".
  bios.bootDelay = "5000".
  snapshot.redoNotWithParent = 'True '.
  unity.wasCapable = "FALSE".
  tools.remindInstall = 'TRUE '.
  workingDir = "/ vmfs/volumes/512b5271-cb39b672-c198-001e676870c7/VM-SBS2011-snapshots".
  fileSearchPath = "/ vmfs/volumes/512b5271-cb39b672-c198-001e676870c7/VM-SBS2011-snapshots;.»
  checkpoint.vmState.readOnly = "FALSE".
  checkpoint.vmState = «»
  scsi0:1.present = 'TRUE '.
  scsi0:1.DeviceType = "scsi-passthru.
  scsi0:1.filename = ' / vmfs/devices/genscsi/naa.5000878000000000 '.
  scsi0:1.allowGuestConnectionControl = "FALSE".
  SCHED.scsi0:0.shares = 'normal '.
  SCHED.scsi0:0.throughputCap = 'off '.
  scsi0:0.mode = "persistent".
  scsi0:2.present = "FALSE".
  sched.swap.hostLocal = "disabled".
  

  I copied the file-VM in VMWare ESXi 5.5 on another data store (more old HP SAS) server en guess what... it's starting! So for now I'm back in business. It seems that there is something wrong with the original server, because my hard file appears to be damaged otherwise it would not start on my old good spare HP server...

  I still wonder what the hell happened after I replaced the internal drive of hypervisor type USB and installed ESXi 6 on a cool USB. I got in the RAID array. Now, even when I start the server of origin with it's original ESXi 5.1 USB (intact), I got the same error when you try to start the virtual machine. Is thinking there's something wrong with the RAID array but I can access the database on the RAID array and (after you move the content to another VM machine) all files are very well run smooth on the other server. Kill me.

  Any ideas?

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

• Samsung S3520 does not start after that I changed the screen he wants more F2 or F4

  F2 TO SET UP

  AND

  F4 FOR RECOVERY

  BUT F4 DOES NOTHING

  AND F2

  THIS LAPTOP HAS WINDOWS 7 SUPPORT AND WORKED PERFECTLY UNTIL MY BROKEN SCREEN

  NOW THE SCREEN IS BACK WORKING I CAN'T BOOT MY LAPTOP

  ANYONE HAS ANY IDEAS PLEASE?

  Hello

  Thank you for the update.

  I suggest you run bootrec commands and check.
  Reference:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  You can create the media to install Windows 7 from this link:
  https://www.Microsoft.com/en-us/software-download/Windows7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Satellite A200 PSAEOE does not start after upgrading memory

  Hi, I am first time here.

  I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

  Can anyone help me, please.

  Post edited by: Marian ovidiu

  Hello

  The A200 series supports different chipsets;
  Intel 945 PM
  Intel 945GM
  Intel 943GML

  As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
  Take a look at your laptop s user manual * Page 18.*

  Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

• Satellite P200D-130 does not start after upgrading RAM

  Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
  I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
  Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

  I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
  I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

  What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

  Thanks in advance,

  Michael

  Hello!

  I think that both modules are not compatible to the laptop.
  Normally you can upgrade your laptop to 4 GB. Look in the user manual.

  The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

  Good bye

• T400 does not start after the first display screen

  What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

  I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

• Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite

  After you download the last updated September 27, lightroom does not start on my mac.

  Used to work without problems so far.

  Tried to disconnect the last clouds and again without success.

  Thanks, that worked.

  Now, I have to do the update again hope that will work as well...

  Do you have any idea what caused the problem?

  Concerning

  Christian

  MIT thank wurde

  Hans Christian Behrendt

  2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:

  Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates

  by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop

  Lightroom *-see complete discussion

  https://forums.Adobe.com/message/8015642#8015642>

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• FF does not start after upgrading to version 27.0.1

  FF does not start after upgrading to version 27.0.1
  Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

  Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?