IMac 5 k unable to boot Yosemite?

Similar Questions

• Satellite P100-347: blue screen at startup - unable to boot volume

  Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.

  During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).

  I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.

  Can I do other than take it to a technician?

  Hello

  Well, for the most part the BSOD appears due to hardware problem or serious software.
  In your case, the software problem is possible

  Unfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
  Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD disk

  I think, now, you know that regular backups are important and necessary!

• HP pavilion 5CD3081TFX g6: hp pavilion g6 5CD3081TFX unable to boot from usb

  My hp pavilion g6 5CD3081TFX unable to boot from usb, since I have to clean install my Windows 10 operating system, when I press f10 after restart it asks password Admin, when I enter the password it shows disabled system? Any solution?

  @Suryakant2015

  Enter: 41694304

  Kind regards

  DP - K

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• HP 15 r036tu: unable to boot from USB

  I'm unable to boot from a USB key, I started correctly the USB, it works on other laptops but not on mine. I also changed my boot order in the bios, but still, I'm not able to boot from USB. I read somewhere that it's because of security windows 8.1 can you help me with this.  Thanks in advance

  The trick to this is to use a utility that will make your USB boot EFI and MBR.

  The following link goes to a third party site with free downloadable open source utilities to do exactly that and even more.

  http://www.RMPrepUSB.com/tutorials/127-make-dual-32-64bit-PE

• ProBook Crash/unable to Boot by using a recovery disk

  The title explains it well enough. My computer crashed after getting the blue screen of death. I was unable to boot after that. I ordered the HP recovery discs. And now I am unable to boot from the recovery disc. I also gave a screen that says device not found Boot please install an operating system on your hard drive. I did the thing any escape goes in the boot, it I also did the F11 thing, nor have borne fruit. If it's important I use a ProBook s 4530 on Win7 64 bit.

  Then I ran another test drive, then tried to install windows again, it worked. You'll love PCs. thanks for your help.

• BlackBerry Z10 unable to boot my BB Z10

  Hello

  Several times Z10 unable to boot after restart of my BB, I removed the battery and switch on
  It shows only the process of loading with logo and off.

  Help, please.

  Concerning

  Follow the instructions in this thread:

  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  You'll need to know the specific model your Z10 is... probably the Z10 STL100-1 model of you bought this unit through Airtel.

• Upgrade - unable to boot (probably error classpnp.sys) RAM

  Hi all

  I have an acer aspire 5742G with windows 7 Home premium Edition and 3 GB of RAM.

  I bought a Corsair Valueselect 2 x 4 GB RAM together. When I replaced the original/3 GB with the corsair, I was unable to boot windows.

  Problem mentioned here: http://www.tomshardware.co.uk/answers/id-1888966/windows-boot-memory-upgrade.html

  Basically, I get an infinite loop of "unable to start Windows. A recent hardware or software change might be the reason for this... »

  1 start windows normally

  2 start windows in recovery

  These two options are responsible and we're back to the same loop.

  After trying to boot into SafeMode (via F8), I could see the start-up hung at classpnp.sys

  I put the original RAM dos and windows started without any problems.

  Googling has revealed that this problem was already previously, but no solution has been put forward except: put the old memory.

  (http://forum.crucial.com/t5/Standard-DRAM-Memory/Windows-7-boot-failure-after-memory-upgrade/td-p/129972)

  I've updated BIO to the latest version, BIOS recognizes the 8 GB (in original and updated updated version).

  Any ideas / suggestions are welcome.

  Kind regards

  Update and closing:

  I went to the shop of pc and we tried the RAM from another manufacturer, ICUDU (2 x 4 GB 1333) and the pc started without any problems. I'm surprised that the manufacturer of the RAM has this impact it could work or not.

  I hope that this problem is not encountered by others, it was quite an experience.

  However, my conclusions are added below. As I mentioned in the first post, the problem has been experienced before and the 'solution' was a status quo, do not level. This experience taught me that not all RAM is created also. Even the best-known brands may be sometimes inconsistent.

  Summary:

  Upgrade of RAM 8 GB on an Acer aspire 5742G with i3 - 370 M processor:

  Upgrade memory ICUDU (2x4gb) Kit works,

  ValueRAM Corsair (2x4gb) - sorry to say - did not work.

  Kind regards

• The system is unable to boot automatically. The BOOT environment variable must be set to a bootable image.

  Hey guys

  I need help, in my company trying to learn switches I flashed my switch all :(

  I now get this error

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only

  switch: dir flash:
  Directory of flash: /.

  3 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch:

  C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
  Updated Tuesday 22 July 02 17:18 by antonino
  WS-C2950-24 from...
  Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
  XMODEM file system is available.
  Initializing the Flash...
  flashfs [0]: 1 files, directories 1
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 7741440
  flashfs [0]: used bytes: 1536
  flashfs [0]: available bytes: 7739904
  flashfs [0]: fsck flashfs takes 4 seconds.
  .. .done boot flash.
  Boot sector file system (bs :) installed, isfd: 3)
  Setting Filesystem block (pb :) installed, isfd: 4)
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  switch:
  switch:
  switch: flash
  Initializing the Flash...
  ... The flash is already initialized.
  switch: dir /.
  Unknown cmd: dir /.
  switch: dir

  List of currently registered file systems:

  Flash [0]: (reading / writing)
  XMODEM [1]: (read-only)
  NULL [2]: (reading / writing)
  BS [3]: (read-only)

  switch: 0
  Unknown cmd: 0
  switch: flash_init
  switch: load_helper
  switch: dir flash:
  Directory of flash: /.

  2 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch:

  Hello

  It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.

  Thank you

  Garrett

• Unable to boot computer after several attempts

  Earlier this year, I bought a Dell with Windows 8 is already installed.  I don't know where the disks are supplied with the computer.  Recently, I was unable to boot my computer.  I restored to factory settings, updated it, restored to an earlier point, and now it does nothing.  Sometimes I was able to connect and it works fine.  Then, I stopped him and I don't and then sign up again next time.  Right now, it is not yet running the auto repair.

  So, anyone have any suggestions or know what I have to do because I really want my computer to work.  If I can't connect, is there anything I should do?  How can I avoid this happening again?

  Sunday, September 14, 2014 00:51:23 + 0000, BK_81 wrote:

  Earlier this year, I bought a Dell with Windows 8 is already installed.  I don't know where the disks are supplied with the computer.

  Almost certainly, it came with none. Instead it came with a recovery
  partition.

  Recently, I was unable to boot my computer.  I restored to factory settings.

  Using the recovery partition?

  refreshed, restored to an earlier point, and now it does nothing.

  Unless you are having a hardware problem, you probably screwed
  something in these steps upward. Exactly what you were doing and how?

  Sometimes I was able to connect and it works fine.  Then, I stopped him and I don't and then sign up again next time.

  That looks a lot like a hardware problem. Maybe overheating.
  supply failure, hard drive, motherboard, RAM or something else.

  Right now, it is not yet running the auto repair.

  So, anyone have any suggestions or know what I have to do because I really want my computer to work.  If I can't connect, is there anything I should do?  How can I avoid this happening again?

  He must still be under warranty, and you should probably get Dell to
  see what is the problem.

• Unable to boot from the cd

  HI, I have vm with 2008r2, want to format it, I've attached the os image, but am unable to boot form cd, whenever vm restarts it's hard drive startup form

  Hi, open vm definition go options tab--> select option to start the list and check mark the setup of Bios of the Force.

  WHT he will, it will enter in the setup of the BIOS of the virtual machine at the next startup. In the BIOS configuration, you need to focus on 1 CD/DVD boot rom drive. now, save the bios and restart the virtual machine. you are finished.

  Now it will boot the CD or DVD what ISO image for evever etc.

• Alienware X 51 R1 unable to boot from the CD

  I've noticed lately that my x-51 R1 running Windows 7, is unable to boot from the CD/DVD drive using the UEFI. I tried with a CD of Linux for the class, and I'm trying to reset my HP MediaSmart Server old ancestors via a disk recovery and in two attempts, the computer will boot directly from the HARD drive.

  Installation boot is CD/DVD, USB, CD/DVD or HARD drive.

  UEFI BIOS is

  Computer is running that Windows 7 Home Premium, Intel i3-2120 3.3 GHz bought in December 2012.

  Any help would be appreciated, I will try to answer all questions as well.

  Calling Customer Service would be good, but they try to charge me...

  The UEFI boot sequence does not take too kindly to optical drives. It is best to make a USB bootable using Rufus:

  http://Rufus.AKEO.IE/

  For an example, see here:

  http://dellwindowsreinstallationguide.com/converting-your-Dell-Windows-reinstallation-DVD-into-a-reinstallation-USB/

  If you make a recovery media using the latest version of Respawn Alienware be sure to use USB (USB key or external hard drive USB) and not a DVD media:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/

• ICH kann Lightroom 6 nicht installieren. Download Gingold bei 99% ab! iMac OSX Version 10.10.3 Yosemite

  ICH kann Lightroom 6 nicht installieren. Download Gingold bei 99% ab und wirft CD aus! Selbst wenn ich den Inhalt-CD auf den kopiere Office wirde die Installation bei 99% abgebrochen! Was kann ich noch tun? HAB auf meinem PC Software also. iMac OSX Version 10.10.3 Yosemite

  Hi Stefang97625626 and Luki20199,

  It seems that the content on the CD is damaged, so you are not able to install Lightroom 6 thereof.

  I recommend you both try 6 Lightroom download and installation from the link below:

  Install Photoshop Lightroom

  Once downloaded, click here to learn more about How to download, install and activate Adobe applications

  If it still doesn't work, I'll ask you examine the Setup log file to get a better understanding of what is cause of his failure.

  See, How to examine the Installation log files?

  We invite you to update this discussion in the case where you need help

• I have download ESXi 3.5 VMware site, write on CD, but unable to boot from the CD, why? ESXi installation does not

  I have download ESXi 3.5 VMware site, write on CD, but unable to boot from the CD, why? ESXi installation does not occur.

  Please help on this issue.

  Since there is no integration PAM for ESXi, you cannot authenticate to ESXi itself using active directory.  -What are you talking about?  You can always have virtual machine with windows and active directory.

  -KjB

  VMware vExpert