IMac Fan AFTER Reset SMC fort

Similar Questions

• MacBook Air battery does not load after resetting SMC

  

  Hi all, hope you can help me with this. My model of Macbook Air early 2014 seems to have some problems with its battery. The battery status says "do not load" and it is stuck at 74%. My charger light is still red and I tried to check the status of the battery, it is said to be normal; also I have reset the SMC and all that stuff that is suggested on the discussion Forum, but still it is of no use. Someone had a similar problem before?

  Try resetting the SMC two times more.

  If this does not help, please contact Apple support.

  https://support.Apple.com/contact

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• iMac fan sleep after security update

  The fan on my iMac 27 inches (mid 2011) will not stop when the computer is put to sleep. I am running OS X Yosemite 10.10.5 version. Graphics Intel Core i5 at 2.7 GHz. card processor: AMD Radeon HD 6770 M 512 MB.

  I think it has something to do with security update 2016-004 (awords of content security of OS X El Capitan v10.11.6 and Security Update 2016-004 - Apple Support)

  I just updated the other day and since the fan will not go to sleep when I put the iMac in mode 'sleep'. I've also updated iTunes and Safari, but I doubt that this has nothing to do with it.

  The SMC reset and reset the PRAM was conducted without success.

  Any ideas?

  Thank you

  Sometimes it takes several MSC resets for the reset to work. Please do the reset SMC 2 - 3 times and then repeat the test.

• Some mornings, I find my 27 "i7 2009 iMac fan runs full speed

  Some mornings, I find my 27 "i7 2009 iMac fan runs full speed

  Try resetting the SMC http://support.apple.com/kb/ht3964

• Reset SMC. removable or non-removable battery?

  Reset SMC. removable or non-removable battery?

  Nice day!

  I am considering a SMC reset.

  After reading this thread - https://support.apple.com/en-us/HT201295

  However, I don't know if I follow the steps:

  -If the battery is good behaviour

  or steps

  - If the battery is removable.

  My SN is C1 * TY3

  Theoretically my battery is removable, but I'm not sure if it is removable, in general, or if it means that he is or is not a "sliding door", as was the case on some previous models. Obviously the text found in ' Reset of the SMC on Mac Laptops ' more or less indicates that mine is non-removable, but I'm just looking for that very few insurance telling me stop worrying...: Pei

  Thank you!!!

  < published by the hosts of personal information >

  You should NOT put a serial number!

  in the Apple menu 'about this mac' give what he says about your mac: number, year and model, or a screenshot of what he says.

• How can I restore my passwords in the keychain after resetting the PRAM?

  I have reset my PRAM on my iMac 24 "after some wobbly behavior.  Everything is going well except that all my saved passwords in Safari are gone.  Can I get back them?  Where should I look?

  Reset the PRAM should have no impact on your Safari passwords. I would recommend realized a report of EtreCheck and announcement to your response to this message. Simply click on the link, download the application and view the results of the report in your response to this message. The report will indicate any question obvious cause of your problems.

  If you want to learn more about EtreCheck, please click on the link.

• iMac fan runs full speed

  Hello!

  My iMac fan runs full speed when I watch videos online. Is there a way to know what might cause this problem?

  IMac 2013

  10.9.5 OS

  2.9 Ghz, core i5

  8 GB ram

  1 TB HD (900 free)

  Use the activity monitor to find out.

  Finder > Applications > utilities > activity monitor > CPU

  

  For more information: https://support.apple.com/en-us/HT201464

• How to unlock an ipad after reset of the manufacturer?

  How to unlock an iPad after reset of a manufacturer.  Purchased from a third party and do not know the original owner.

  Without the previous owner Apple ID and password, the iPad doesn't help. Not even Apple can help you.

  Get your money back if you can.

• My new Macbook Pro backup in a time Capsule with 2 iMacs. After the first incremental backup but backup every now and again he returned to the backup of the entire drive, why is - this

  My new Macbook Pro backup in a time capsule, as well as 2 iMacs. After the initial backup, it seemed incremental backup but from time to time, he performs a full backup why, is it?

  time to time, she performs a full backup

  What evidence are you using to decide that she performs a full backup?

• Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please

  Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please, help

  These can help:

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello &gt; select language &gt; Connect wifi &gt; my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Do you receive an error message?

  Are signed with the same Apple that was used to get these apps at the start ID?

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• Cannot find HP printer after reset printers on Air

  I hope someone here can help or has had the same problem.

  I recently got a new printer wireless HP Envy 5660.  Everything worked find when installing, it finds the printer on the network, and he added with the scan function.  During the last part of the installation, I had battery problems and he stopped (later I realized, it didn't matter because it was for registration and other things that could be done later).

  Since I thought I had to redo the installation, I thought I would start from scratch.  I deleted the printer (who also had the function of scan displays on the screen of the Mac printer) and redone the installation.  Now after installation configurations the password on the printer wireless, it is said that the wireless settings have been saved, but could not find my printer on the network.

  I've searched the forums and I tried everything I could find:
  • Reset the printers on the MAC
  • Restore the default settings of the printer
  • Reinstall the drivers both Apple and HP
  • Restored from a Time Machine backup
  • Turn off the printer, router and computer
  • To repair the hard drive
  • Other stuff I probably forgot

  I can add the printer as an IP printer, but then I do not have the scan of the Mac function.

  I know that it worked perfectly before because when I installed it the first time it was on the Mac with printing and scanning.  To make sure that it wasn't the printer or the network, I went to another Mac and clicked on the button Add Printer printers, and wireless printer has been found on the same network and installed with the scan function.

  If anyone has any idea, please let me know because I really need the scan function.

  It could be something with the change in network or Hello after resetting the printers that does not show the previous printers in the network?

  May be corrupted printer preferences given that you have installed the drivers both Apple and HP. It is not necessary to do both.

  Open the Finder.

  In the Finder menu bar, click go > go to folder

  Now type or copy paste the following text:

  ~/Library/preferences/com. Apple.Print.Add.plist

  Click OK, and then place the com.apple.print.add.plist file in the trash.

  Restart your Mac and your printer to test.

• 6 more need another apple ID after reset

  6 more need another apple ID after reset!

  Is your Apple ID?

  If this isn't the case, you must contact the original owner and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support