iMac screen distorted with vertical bars

Similar Questions

• How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.

  See you soon,.

  Vikas

• I accidentally changed a few settings on the appearance of my mail on my IMac screen. The top bar is therefore more visible all the time, and the screen seems now exit by moving to the left. I want to restore valuable appearance and method to quit smoking

  The top on my mail page bar is no longer visible, unless I hover.

  The screen seems out by moving to the left.

  How do I change them?

  I don't want to say 'previous' and not 'valuable '!

• WINDOWS SCREEN COMES UP WITH THE BARS MOVING ON THE SCREEN BUT WILL GO NO FURTHER LOADING.

  THE WINDOWS SCREEN COMES WITH THE BARS MOVING ON THE SCREEN BUT WILL NOT GO FURTHER.

  Hello

  its possible your video drivers of meetings required.

  Info

  http://www.ehow.com/how_4921037_update-display-drivers-Windows-XP.html

• My Late 2009 27 "iMac has problems and vertical stripes

  Hello friends,

  I'm looking for help with my iMac. A week ago the display began showing scattered pixels and it froze when switching between desktops. At this point, I restarted and the screen came with vertical lines, made of strips of color slightly different at intervals across the screen. There are five of these lines. Sometimes the lines persist through start upward and stay on the screen. Sometimes, they disappear and reappear later. Sometimes my computer freezes with lines and the apple logo and a progress bar. They stay when I boot in safe mode and my bootable backup as well.

  Abdesslem Support recommended a Genius Bar apt. To diagnose the prblem. I took it, by explaining that I thought it was a video card or the issuance of the logic board. Genius Bar says it's probably bad Ram. I went home and started to test the ram. I tried each piece individually and as a couple. I always had problems. I ran Memtest 86 and Rember each for hours at a time and got no errors. I tried to boot into Apple Hardware Test, but it never loaded. The internet says I should boot from my installation discs, which of course, I have more.

  I fear that the cost will be too prohibitive to repair and so far, each local repair company I called said that they repair the vintage iMacs.

  Any advice?

  This is again an iMac 2009 end 27 "with 16 GB of RAM DDR3 1066 Kingston into 4 sticks of 4.

  Try to replace your RAM with all the new RAM. You can check that the CrucialAdvisory tool, or OWC. Both are reliable suppliers. If the new RAM works fine. If not, return it.

• Home page and a few other Web pages have a vertical bar of 2 inches on each side of the page. How to permanently set set the pages to fill my screen?

  I have a HP - i5 with Win 7 and only use Firefox 35.0.5. Recently, I met some problems with my home page loading with blue text on the left side of my 2-inch screen and put it in the shop. Some viruses are removed and 35.0 FF was installed.

  Now my home page and pages loading with a 2 "empty bookmark bar vertically to each side of the page.

  Can I use zoom in on the view or the - + zoom and zoom to 100% to 133% increase, but this change is never permanent.

  Try to fix the problem I uninstalled FF 35.0 and installed FF 35.0.5 directly on the FF site. I also uninstalled AVG virus protection program. None of this has helped.

  How can I get rid of these vertical bars of 2 inches of empty space at all TIMES?

  I have a HP laptop with a processor AMD, Win 7 and Firefox 35.0.5 and he has never had this problem.

  Firefox should remember your level of zoom on a site-by-site basis. It is not "global browser" as in IE.

  Note: If you zap the history, make sure not to clear the Site preferences.

  If you need to adjust each site by about the same amount, you can use an add-on to set a higher level of the base line of the zoom. For example: Default FullZoom Level.

  Unfortunately, there is no unique zoom level that will work perfectly for all Web sites due to the preferences of individual positioning of their webmasters. But I hope you can find a good middle ground so you need not all zoom each time.

• IMac late 2009 - 5 yellow bars on the screen - sometimes...

  Hi all..

  I recently bought an iMac late 2009 really nice second hand.  It worked wonderfully for a few weeks and I was about to become a mac convert.

  All of a sudden things have changed.  I pulled to the top of the machine first thing the morning only be greeted with lines to the bottom of the screen and a stall on a white screen.  The next day, it worked fine for a while.  Then the problem comes back for an hour or two.  Then back to yellow bars.

  I pulled up to my PC and started researching and found suggestions that this could be a graphics card problem.  After some time of reading and discovery, I pulled the top of AHT, and he advised me that there is actually a problem with the machine, and it's a sensor on the HARD drive.  Then, I would expect an additional error that could somehow link to the screen and absolutely nothing.

  Now, I know that historically the 27-inch late 2009 iMac screen / GPU has been examined by several different sites and forums but it is now an old machine and I don't know what to do.  What is a HARD drive failure?  Seems very unlikely but the only error listed... The flaw is GPU displayed on AHT down?  If this graphics card has received a "reformatting of oven" at a given time in its life and Ive been sold a dunce?

  Any advice would be great.  I don't have an Apple store near me and I don't know if they would even look at a machine this old.

  Help, please... My brief relationship was positive that ended quickly in tears!

  Alan

  Take it to an Apple authorized Service provider in your area, click on to start Apple authorized Service Provider Locator to find one near you.

• Vertical bars, thin, white full screen of WMP11

  With the help of Dell Dimension 4700, 3 GB RAM, EVGA GeForce 8400 GS with 512 MB, Windows XP SP3, SoundSpectrum G-Force 3.9.4.

  When I open WMP11, then select show improvements, then close show improvements, then go to the mode full screen... There's a mess of thin, white vertical bars.  This is equivalent to any visualization I select, or if no view is selected.

  No matter what I do - short of closing and reopening of WMP - him reappear the white vertical bars in mode full-screen.

  Is this a known problem with WMP11?  No matter what known fix?  I searched 'vertical bars' in music and its Forum and found nothing.  Thank you very much!

  I had the same problem, and before that I played with it too much I did research. These messages have helped me do a bit of that research. I also think that it may be useful to mention that I have a Radeon 5700 series, I use my TV 32 inches as my screen via the HDMI connection available on the vid card. Levels at 1600 x 900 is enabled. I am a COMPUTER professional and nothing of what I read seemed logical as to the root causes of this issue. I use this workstation for all and everything under the Sun, audio recording and mixing, capture video and administration of editing systems, encoding, gaming, etc. Basically, I make the most of my very competent and versatile Windows operating system. Sometimes, the simplest thing is the answer. In my case, it seemed that this was the case. I can't say I've done work for everyone, but it worked for me. That said, here's what I did to fix the problem. (I did all that, although not in full screen, still playing album The Roots Things Fall Apart I was listening too when I arrived in this issue)

  1. I disabled the visualization.
  2. I have a right-click on the screen and selected More Options...
  3. Click the Plug-ins tab. You should see the list of categories on the left and the right corresponding sub categories list.
  4. My category of visualization has been selected by default. On the right will be the list of visualizations that you have installed. (I have only the defaultAlchemy,Bars and wavesandbattery installed) When you have a view selected, you should see a section in this same window just below the list of categories.
  5. It should be a Properties button available when a specific view is selected.
  6. I tried to use properties for all the visualizations except battery and I got a message that says that this plug-in does has no properties that you can set.
  7. When I went into the properties of the battery there are 2 settings I could adjust. Screen size under full screen settings and the off-screen buffer size under Player settings.
  8. Only, I've adjusted setting the screen size to match my resolution (1600 x 900). I did adjust the other settings.
  9. I clicked OK to close this window. I clicked on apply and thenOK in the window main options.
  10. I activated the visualization of my preference. (Battery is being my favorite)
  11. I went full-screen, and the white bars. Visualization worked perfectly.
  12. I tried the other visualizations and got the same result with each of them.

  Hope that this clear and the most important is useful.

  http://www.Speedtest.net/result/888894683.PNG

  http://www.Pingtest.net/result/20846112.PNG

• Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

  Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

  Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

  With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

• record online audio on the iMac 27-inch with screen Retina 5 K?

  How can I record a quality online on my

  iMac 27-inch with screen Retina 5 K?

  Any suggestions?

  

  So from what I can tell the model have built in analog audio input, you would probably need some kind of third-party USB audio interface. You may be able to record in mono with a suitable adapter because the port is apparently compatible with Apple headphones for example.

  TT2

• Since its installation in Firefox 20.0.1. There is a box in the center of my screen titled progress install with a bar running below the Green progression.

  Please help this driving me Mad
  Since the installation of Firefox 20.0.1. on my MS Windows 7 Toshiba Laptop there was a box in the center of my screen titled "progress install < with a bar running below green growth."
  Firefox 20.0.1 (FF) works very well and I can drag the box of progress on my screen to my heart's content. Although there no small cross at the top right I can get rid of him by my mouse over the icon (ff), pinned to taskbar program in hover. This gives me a box of progress of installation with small cross, click and his party. That is until I got close and restart (ff) and back it comes in the middle of the screen. I tried to get rid of it through CTRL-ALT-DEL Task Manager, but even once, it reappears on start up (FF) I also stripped (ff) of my machine, once using widows uninstall/change of MS program features and for the second time by using third-party software as soon as I reinstall (ff) new same old problem.
  Thank you
  Cordially Fenfolly

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Strange khaki screen with vertical lines

  Hi all,
  I desperately need help! Please help me. I've never had problems with my Toshiba satellite. But, today I was turning away, but... the only thing I had was a strange screen khaki color with vertical lines in the colors of the spectrum. I tried on several times, but each time the result was the same. And also the screen becomes darker and darker while I am interested in it. And at some point, the computer is a function that seems to restart and the result is the same...

  I do not much about computers, but I know something serious. Diagnose you something for me...
  Thank you, Ana

  Hello

  The pictures on the screen appear like behind a fog?
  This looks like a failure of inverter FL.
  This part is placed behind the screen and is not very expensive.
  In my opinion, you will not be able to replace yourself and I wouldn t recommend this if you have no experience.
  I recommend to contact Toshiba service partner in your country and technicians must first check the laptop.

  Good luck

• The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  I'm trying to establish a connection between my iPhone and my iMac. The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  This connectivity is not supported (except to attach them). What you trying to do?

  Barry

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

  Hello world. I'd appreciate it really all the advice that you can offer me to help me fix my laptop. I have a mid-2010 Pro 2.4 GHz Core 2 Duo Macbook running OS X Yosemite. A year ago, he started trolling a lot, so replaced the HDD with a Samsung 850 EVO 120 GB SSD internal 2.5 inch SATA III. He works much better since.

  A few days ago, I bought a Google Chromecast and had set up with my MBP. Subsequently, he began trolling and I noticed there are apps in the Launchpad, that I had never downloaded (reader of Google, Gmail, Youtube, etc.). I could not remove these applications or drag them to the trash. Concerned, I decided to back up my files on a USB key and re - install the OS X.

  However, during the priming of the MBP, it is stuck on the Apple logo screen, with the bar never go beyond 50%. (Photo: http://postimg.org/image/66qh6x633/)

  What I tried:

  PHASE 1 (Before reformatting)

  -Safe Mode: Button power button and shift held down. Hit or miss, worked 1-2 times, but when I reboot, is again stuck at the Apple logo.

  -Reinstall OS X: CMD + R; After 15-20 minutes get to OS X utility screen; Reinstalled OS X Yosemite; 7 hours to reinstall - but when the mbp restarts to complete the installation, it is stuck at the Apple logo again.

  -Reformatting: CMD + R; 15-20 minutes get to OS X utility screen (several reboots to work); Select repair for all discs/drives (Samsung SSD, HD Recovery). Exit said that both are very good; Select clear to HD recovery. When this was done, I tried to reinstall OS X Yosemite, but the MBP shuts down suddenly. When I turned on it again, it is returned to be stuck on the loading screen Apple logo. Attempt to restart after 15 +, but same result every time.

  PHASE 2 (After reformatting).

  -Power-> CMD + R = blocked screen Apple logo with 50% progress bar

  -Power-> Option = shows 2 player and free Wi - Fi area (Pic: http://postimg.org/image/58qi2j1vl/); Have you tried all the combinations, but regardless, always gets stuck at the screen of the Apple logo to 50% complete, after an hour, I suddenly hear ' to use English as the main language... ". ", but the screen is still stuck. I left it on 36 hours once and nothing has changed

  -Power-> Shift = error (Pic: http://postimg.org/image/tahklsvy1/); Keep restarting or shows some other error (Pic: http://postimg.org/image/thstc6b59/) and restart. Never crosses.

  Tried other things:

  -Reset PRAM: When restarting MBP, is stuck at the Apple logo screen, 50% progress bar

  -Reset SMC: Stuck on the Apple logo screen for a long time and then the screen turns off, but the laptop is still on. When I press Caps Lock, the indicator light lights up. Also, after some time, I again hear "to use English as...". "even if the screen is off. No matter what I press, it does not wake up to the screen.

  Note:

  -The bottom of the laptop feels hot (maybe), but I do not hear the drive in motion.

  I am trying to save my mbp because I can't get a new one for a few months. Any advice/help is greatly appreciated! Thank you very much!!!

  P.S.: I only am not too computer savvy, please use everyday words words/non-tech, when possible, thank you!

  Remove the SSD and install it in a closed Chamber.  Connect it to the MBP via USB.  It will start?

  Ciao.