Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

Similar Questions

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Cannot access the story I just bought Adobe story, but when I press sign there appears a ST logo with a spinning @bar that has been on my screen for hours

  I just bought Adobe story, but when I press on connect it appears a ST logo with a spinning @bar that has been on my screen for hours

  Can you please try the following?

  -first of all, make sure that you have flash player update. You can get the latest version of https://get.adobe.com/flashplayer

  Now open a session in anticipation of history for some time see if it solves your problem or not

  -If it don't then try opening your browser's private browsing/incognito mode and try connecting to the story from there

  If you are able to connect then you should try clear the cache and cookies of your browser

• I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  Unfortunately, Halo 2 does support Windows Vista and more.  Windows XP is not supported.  There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Dell Dimension 5150 do not start LED logo on 123 + progress bar is stuck at 5% no beeps

  My old Dell Dimension 5150 has sometimes suffered from crashes during startup for quite awhile, but it now appears permanent.

  The symptom is the logo dell appears, but the startup progress bar stops at 5%, diagnosis LED 1,2 & 3 are stable on, power light is green fixed, no beeps, no response to the keys.

  In the past disconnecting the cable for 5 minutes, which gives all the internal connectors a re-allocation of places, you try to start again seemed to do the trick, but no more.

  Any suggestions where to look?

  No such thing as PC2 4300 except for sellers who are less honest.

  http://www.crucial.com/USA/en/compatible-upgrade-for/Dell/dimension-5100

  

  PC2 4200 is too slow

  PC2 5300 5 5 5 12 works fine. Suppliers must match for speed and the CASE.

  Blockages can be feed if it isn't certified EPS12v PFC.

  Minimum recommended is CS750M Corsair.

  http://www.crucial.com/USA/en/dimension-5100/CT667636

  Supplies are not units of 12 v x watts.

  You need 150W on the 3.3v 5v Rails and 15-20w on the + 5VSB rail.

  RAM RAM may NOT BE ECC or buffered or Registerd HIGH density AMD.  Must be LOW DENSITY INTEL Compatible ram.

  RAM cannot BE QUADRI ROWS can operate 2R and 1R, but you can NOT MIX the ranks.  They must all be single or dual rank.

  http://www.Newegg.com/product/product.aspx?item=9SIA7S63715258

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• iBooks automatically starts an audio book... How to stop? Help please - thx!

  ... When I plug Apple EarPods, helmet or an audio jack in my car, iBooks automatically starts an audiobook... it happens all the time when I want to just listen to a song or answer the phone! How to stop?

  Help please - thx!

  I have this problem as well on an iPhone 6. I went to Audible for listening to audio books, but iBooks keeps opening and automatic reading a book that I wasn't even listening when I plug in my headphones. Sometimes there is a delay, then I will listen to something on Audible for a few seconds, and then it stops and be interrupted by iBooks from. It is really unpleasant.

  I really don't want anything to play automatically when I plug my headphones.

• When starting my pc, I get the 0xC00E002 error Code can someone help please?

  whenever I try to boot my pc, I get this code, do not know what to do, anyone have a solution for me?

  Hi David,

  1. don't you reference this 0xC004E002 error code?

  2. not this problem occurs when you run a specific program or out of order?

  3 a copy of your Windows is active?

  To check your Windows activation status, do the following:

  1. System opened by clicking on the button start , right click on computer and then click Properties.

  2. Under Windows activation, you can see your activation status.

  If you are referring to the 0xC004E002 error code, follow the provided steps and check.

  Error 0xC004E002 during activation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/978305

  Hope this information helps. Response with status so that we can help you.

• 'Windows Vista' needs a product key. to buy it permenantly, I already bought and installed with this computer years ago. Help, please

  My computer is about 5 years old, I have Windows vista on it, my child said a screen broken out by asking for a product key to buy 'Windows Vista', it will not accept my product key.  It is said that the product key is already in use.  So he realizes he is already on a computer, but it does not recognize that it is the computer, the number also belongs.   Please help, I have tried everything, I tried to run the two discs that I got when I bought the computer.

  Thank you in advance,

  EV

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

  Chances are that simply use telephone activation...

  To activate by phone: -.
  Activation by phone, click on the Start button and type:
  slui 4
  in the search box and then press the Enter"" key.
  This will bring up the activation of the phone dialog window.
  Follow the steps indicated by the window.
   
  If need phone normal activation fails, recompose the number, and this time do NOT respond when the ansafone asks that maintain you - this should oblige the operator to pick up that can solve your problem.

• Plant the unresolved issues with extensive troubleshooting... Help, please!

  Hello community,

  I am still trying everything to solve these problems, be it related hardware, software... Or both.
  Here's an account a broad of disorders that I have known, and perhaps someone here who had similar problems can help out me!

  Basically, first will not stop the freezing or crashing after loading a broader project (project file is about 25 MB) and a small amount of minor adjustments to the timeline changes are made. Usually, I have to wait about 5 minutes until I can start even work because he is responsible for all media (it's pictures of a marriage of 3 days, i.e. footage DSLR, home videos, audio files, video elements such as the burns film, etc.). After about 5-10 minutes of reluctant working (I'm afraid it will crash if I work too fast) it done inevitably anyway. This problem did not exist during the Assembly edit or any other less extensive editing in the past. I upgraded to first CC 2014 three months after using the CS6 for about 2 years and more.

  • Try to help out myself I allocated 13 GB of ram for first and while I use it I have no other applications open. I cleaned the cache of media and has tried to reduce the size of the project by removing useless content that is not in use. Also, I put my insights to reproduce the 1/4 of the resolution and try to keep the media in my bins defined on the detailed (as opposed to thumbnails) view. I'm not sure if the rendering engine is set on using CUDA, because when I go to the project settings, the renderer is grayed out. I'm sure that my GPU can't use CUDA in CC (but I used to be able to use it in CS6 I think... strange). The GPU driver is updated and current.
  • I have uninstalled/reinstalled CC PP, imported from a sequence in a new project (to reduce the size of the project significantly to 6 MB). I cleaned my Mac HARD drive (more than 10% is free). My external HARD drive is a WD Passport Ultra 2 to USB 3.0 drive with 1.2 to work free. When I run a comparison test on the disc it tops out at close to 90 MB/s read/write. I use my MacBook monitor + an external 24 "running through the thunderbolt connection. Maybe if I run it with the single monitor only MacBook could help free up some space of graphics processing...?

  At this point, that I wonder what else he's doing... Basically, it seems to me that if the program crashes to cause effects that can not handle the GPU or something (transitions, film burns with blend modes, color correction, stabilizing of warp and little basis for audio cleanup)... I was pretty confident that my computer was more than capable of handling this type of workflow, but maybe I'm missing something...

  If you read this thank you very much and I hope you can suggest something!

  Turns out I can have solved my problems with a very simple solution:
  Larry Jordan - Premiere Pro: Trash preferences | Final Cut Pro Training & Classes

  I hope that it might help others if you have similar questions.

• How can I make the folders always open full screen in Vista. I have tried everything it suggested. NOTHING WORKS!

  I tried everything I found on internet to make files open full screen and stay like that. Is there a permanent solution for this? I've been at Microsoft, vistax64.com, etc. including Alt space X - problem solved or BAD! Help, please. Thank you.

  Three options.

  1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.

  2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".

  3: IE New Window Maximizer (for IE only)
  http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html

• Problem with 3D mapping... Help please!

  When I have an object in illustrator and use 3D > extrude and bevel > veneer...  I can get everything, how I want, but after I do this and I want to resize or rotate my object which was 3D'ed and mapped the mapping does not change with it and I must go and re-map all whole again and I have about 550 'Coast' in the map. The option to scale the outlines and effects help not even through 3D ING is an effect. I need you help please.

  Go to effect > distort and Transform > transform if you want to scale and rotate an effect as such:

  

  

• Black screen with blinking cursor! tried everything!

  OK, so this is going to sound familiar.

  I was on my computer when (it seems that windows update force rebooted my system) my computer rebooted in the middle of doing me stuff, got the windows stop screen.  When it restarts I got was a black screen with a blinking cursor.  The only options on the splash screen that works are the program installation, diagnosis and menu start. For some reason, hit F11 to restore the system does nothing and it will pass just to the black screen. Another strange note is that simply type the power button it will stop, I don't need to keep it.

  (1) I went into the bios and restored the default values.

  (2) I called they sent me a microsoft repair disc.

  (3) I tried the Startup Repair, which would have finished enough instantly and tell me that no problem has been detected and if I recently fixed a device, remove and restart. Everything is attached are the mouse/keyboard factory.
  (4) I've tried many system restore points and they all failed. nothing has worked and all generated the error: (0x800700b7)
  (5) I made this

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  When the pc still doesn't load, I put the repair back disc in and got an error message windows boot files where invalid and had the ability to repair and restart or cancel.  After trying blaze these and try several BCD I built always get the same flashing cursor.

  (6) I reloaded windows on a separate hard drive and scanned all viruses, checked the drive to see if there was even loaded windows (out of curiosity because nothing works)

  (7) so everything is saved, but I have 5 years of programming, I don't want to lose or reload due to the download time.

  Is there anything I can try that will work?

  Windows 7 64 bit

  HP Pavilion AMD phenom processor 4 cores.

  motherboard, power supply, gpu, amd chip, all works with a different hard drive, but I really really really don't want a fresh reload

  Please haaalllppp

  Hello

  Try Rescue Kit Free Edition of Paragon.  Review its main features here.

• iMac grey screen, no easy fix yet...  Help, please!

  Hello

  My iMac froze everything by making his first Time Machine backup.  I force quit the machine (press and hold the power), and when it is restarted, it went straight to the gray screen - no apple, no cursor, nothing.  Every time when the computer reboots, the same phenomenon occurs.

  (End of 2011 iMac, most recent el Cap OS)

  I did some research and tried all of the recommended steps, but no luck yet

  (eg. all the steps for this thread https://discussions.apple.com/thread/7408375),

  Inc., resets the security, Recovery Mode, target, MSC Mode and NVRAM Mode.  & also using original OS installation DVD

  The current boot drive is a secondary market of SSD.

  The iMac has a second bootable hard drive inside (original, but moved to different 'port' (the correct term?))

  I have a disk external drive bootable with SSD cloned

  and the original OS installation disc.

  I use the mouse & keyboard USB.

  I'm not able to get the machine at the start of one of the mentioned drives, nor since the installation of the OS DVD.  Or boot disk target.

  Advice for:

  • Get the SSD to start
  • Get the HD to boot
  • Get the DVD of the OS at startup
    
  • Get the iMac to start as a disk target
  • 2nd question: Time Machine is about 1/3 to do elsewhere.  I have this external hard drive connected to my MB, but when I try to open the backup, get the message "there are no ready application to open the document...". ».
  • How can I access the files in the Time Machine HD?

  OR,  Do I have to disassemble the machine at this point?

  • If so, remove the SSD & plug the HD in this port?
  • There is some data on the boot SSD that I would return if possible.
    • Best way to do it?

  Thank you in advance!

  --

  < personal information under the direction of the host >

  It looks like a hardware problem. Make an Apple Store for a free evaluation.

• Difficulties of laptop computer connection LG HDTV with VGA cable... Help please

  Hi, I'm looking to plug:

  Toshiba laptop - PSC08E-03M001EN http://www.toshiba.co.uk/discontinued-products/satellite-c650-1ct/
  (Windows 7-64 bit)

  LG HDTV - 42LS3400 link to TV-http://www.ebuyer.com/product/367615

  Cable is VGA to red, blue & green cable (don't know name sorry) image of cable here:: http://www.google.co.uk/imgres?um=1&safe=off&client=firefox-a&hs=Y2a&sa=N&rls=org.mozilla:en-GB:official&biw=1366&bih=627&hl=en&tbm=isch&tbnid=urskVAMn94lrQM:&imgrefurl=http://www.alibaba.com/product-gs/631055727/SVGA_VGA_to_Red_Green_Blue.html&docid=2pwndXSQ14pf8M&imgurl=http://i01.i.aliimg.com/img/pb/056/749/507/507749056_659.jpg&w=600&h=453&ei=wvihUbujHvCR0QXx5oH4DA&zoom=1&ved=1t:3588,r:23,s:0,i:162&iact=rc&dur=1185&page=2&tbnh=191&tbnw=253&start=17&ndsp=24&tx=158&ty=123.

  Connections are correct & safe, I have:
  Display settings - 1 | 2 shows multiple monitors, duplicate.
  RES - 1366 x 768, landscape of the screen, displays duplicate.  If I'm reading - 'another view undetected. "

  Graphics settings - Intel Graphics & Media Control Panel-display:
  General: Built-in-Display SEC5641, Res: 1366 x 768, color number: 32 bits, refresh rate: 60 Hz, Rotation: turn to normal, scale: scale full screen
  Several screens: Mode of operation: Clone screens, the main screen: built in display SEC5641, second screen: monitor
  Monitor/TV settings - not supported.

  Sorry about all this info, just want to provide as much as possible help to identify any problems.

  PROBLEM-

  My TV displays a picture of sorts however we jumpy/fragile & show three (vertical) versions of the same image on my TV.  Black & white, its sometimes a offline.

  I have the wires on connected TV where I got my Wired Xbox, the option on my TV to input is the component, when I turn on my laptop & the entry has the value component that I see the image on the screen & clearer, however, after logging in screen disappears & said that there is no signal.  The only way I can see anything either again is by ctrl, alt & del.

  If I switch to AV2 on the choice of appetizer menu on my TV, it shows the description of the jumpy/fragile image, ctrl alt del - although the picture improves slightly & is not fragile, its still very black & white & duplicated in three patrs.

  Any help would be appreciated?

  Thanks in advance

  Cameron

  Hey Cameron,

  I suggest you to change the display settings on the computer and check.

  Get the best display on your monitor

  Connect your computer to a TV

  You can also try to update the latest version of the drivers on the site Web of Toshiba display adapter and check.

  Please post back with the State of the question, so that we can help you further.