Image does not appear after using an Export Preset

I took three pictures and used a predefined export to process the images in HDR Pro. Everything works fine but when I save HDR Pro and return to Lightroom, the new image doesn't appear if I viiew another folder, and then go back to it. Is there a form of automatic update that would make these "new images" visible without doing what I do?

Bob

Are you sure that the new HDR image is not stacked with the original glass?

Tags: Photoshop Lightroom

Similar Questions

  • images do not appear after downloading (using http servlets)

    In order to be able to view the images after download created an http servlet. I created the entry in the web.xml file. I have the input file and the download button.

    It shows no error on the console, however, after uploading the image does not appear on the screen. Although the temporary folder.

    Give me somebody can explain why? what I am doing wrong?

    http://www.awasthiashish.com/2014/12/uploading-and-showing-image-file-from.html

  • Background image does not appear

    I worked on my Web site recently, and in order to personalize it a bit more I added some background images to the cells. The problem is that the image does not appear in my browser. I tested background images of page too and nothing. It makes no sense. I select the cell, go to the properties panel, and then find a background image. Once I have select this one appears in dreamweaver, looking the way it is supposed to. After I downloaded the page, however, I check in my browsers, Mozilla Firefox and Internet Explorer, and the image is not there. All this shows is the background color of the cell or of the page, depending on the question of whether I make the background color of the transparent cell. I asked a few friends to view the page too to see if it is for them and they tell me that it is not for them either. Anyone know why this is happening? Oh I should mention I publish as an html file and I tried both .jpeg and .png file types. In addition, it's all in Dreamweaver 8. Any help would be greatly appreciated. Thanks in advance.

    Background ="... /... / move background2.jpg

    can't go up two levels of folders from there...

    Also should avoid spaces in the names of files and folders.

    copy of a previous post on this topic:

    the style sheet link and especially images that you have placed have paths such as
    this:

    ../gifs/ means go UP one folder level, then into the folder named ">

    The problem: the home.html file is at the level of the root of the public
    space web is not not to attend. So all these paths are distributed on the
    downloaded pages.

    My guess her site definition is set to the wrong folder level in the
    local and remote site.

    The way it should be is the local and remote should be defined in the folder
    that contains home.html. Use the 'Folder of the Site Local' button to select the
    good record and the "host directory" If the folder level must be
    adjusted on the remote control (such as you land in a high level of private accommodation
    folder when connecting with ftp and need to go to one site files
    folder named "public_html" then type public_html directory of the host
    the remote server info line)

    > The page is http://www.flash-vault.com/submissions.
    > The background image is supposed to appear behind the five titles in the
    > first column. It appears in dreamweaver and when I saw, but not after
    > It is published.
    >

  • Why the original image does not appear on my desktop and not Wo one?

    Why the original image does not appear on my desktop and not Wo one?

    I made adjustments to an image that shows himself such that adjusted with the symbols at the bottom right of the image.
    I tried to drag and drop and he transferred the original image.

    The adjusted picture can be transferred and what I need to do or I do something wrong?

    Thank you

    Greg,

    Claes has pretty much nailed. You will do well to spend time to learn how Lightroom works. He is not like most software that you've used before, and if you don't understand what it does and how it does, you stand a good chance of losing your images.

    Try googling 'Lightroom tutorials' or 'get started in Lightroom. It's not rocket science, but it's different.

    HAL

  • Why the serial number does not appear after typing the code out of the card I bought?

    Why the serial number does not appear after typing the code out of the card I bought?

    See the following topics:

    Using redemption code

    --------------------

    http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

  • Image does not appear in all browsers

    On the homepage, just below of the "available soon dethrone" now has a command button. It seems that with Safari. I tried Firefox, Chrome and IE, and the image does not appear on one of these. The thing that annoys me is that the image was there before and worked fine, I didn't make it bigger and link, so I'm confused why all of a sudden it is not displayed.

    Thanks in advance for any help.

    http://turtlecell.com

    Post edited by: hcblue

    I suspect that your image is not properly optimized for the web.  Open in Photoshop & press on file > save for Web.

    In Panel of DW of files, the PUT option (up arrow) is used to upload files to your server.

    Nancy >

  • Why is my image does not appear in my library? I can see it in my library on my Android phone, but where is it in my library in the DI library panel?

    Why is my image does not appear in my library? I can see it in my library on my Android phone, but where is it in my library in the DI library panel?

    I thought about it. Thank you for you. He appeared once I hit sync to cloud

    icon.

  • Can someone help me? PNG image does not appear on Dreamweaver cs6

    Can someone help me? PNG image does not appear on Dreamweaver cs6,

    Why its display with blue bg? his strange appearance... !!

    hand.jpg

    Thanks for your reply...

    Well, the problem was on the mode of the image. It is in gray scale, when it changed to RGB-image works fine...

    Once again thank you!

  • . Linked PSD placed behind the text block. Does not appear in the PDF export?

    So, I have an image as a .psd in my spread which is behind a block of text and a low opacity to ensure readability. However, when I export to PDF, it does not appear in the final file. Any ideas? Thanks in advance for any help.

    EDIT: now I found a work around using a PNG exported from Photoshop instead of the original file. Would be really nice to be able to use the PSD so if changes are to be made to the image, it can be easily updated.

    J

    Hi Justin,

    HM, then you must make a tough decision, your only choice to be on the "safe" side

    Export to PDF v1.3 (Compatibility Acrobat 4 (PDF 1.3) where you check "simulate overprinting" in the fourth tab of the settings of export PDF.

    This workflow is not recommended for PDF files you want to print:

    Just for the screen display!

    Then all the 'overlay' and 'transparency' is cooked in the PDF file so to speak.

    Here is a screenshot of my German OS:

    Uwe

  • image does not appear in the HTML email

    Hi all kind people.

    I have a client who wishes to an HTML email designed for her. I did a test,

    and the CSS and HTML works fine, but when I try and export it to
    Safari (safari > file > send the contents of this page) it does not appear at the other end.

    Is there a way to insert the image in the HTML code? or y at - it another way to do this?
    Maybe Outlook?

    I'm on a Mac and using mail as e-mail client.

    Michael Farnbach wrote:

    Hi all kind people.

    Is there a way to insert the image in the HTML code? or y at - it another way to do this?
    Maybe Outlook?

    Maybe, but not the incorporation in the email.  All peoples kind here do is to explicitly link the images directly from the server.  for example, if I want to connect an Adobe image on my Web page or email, then I would use an explicti path such as:

    https://wwwimages2.Adobe.com/content/dam/Adobe/images/shared/product-totems/80x80/Totem-AX I-pro - 80 x 80 .png .adimg .mw. 80.png>

    In this way, I can move the page or even e-mail, but the image will still be there.  However, you must download the image on the server before creating the link otherwise it would be a futile exercise.  In addition, some people have disabled images in messages, but this isn't your problem.

    Now this is how I do but a few muppets will tell you to do something funny.  What works with you.

  • RDXV60KB - tuning menu does not appear after Exchange of power supply

    The earlier fault of decommissioning has been cured by replacing the PSU, but since the setting menu does not appear.

    The other mistake is the selection of VIDEO channels can be seen but on HDD and DVD there is only sound and a blank image.

    It's the same thing using the HDMI Sockets and SCART.
    Ribbons cables have been eliminated by substitution and are assuming that the failure was caused by the original sin

    > The earlier fault of decommissioning has been cured by replacing the PSU, but since the setting menu does not appear.

    Not quite sure what type of advice that you expect from this community, but according to the information displayed in your original post, there is certainly a problem of related material and there is only one solution: need to replace defective parts. This can be done by technicians available in your country.

  • Satellite A300 - 15K: Polish character does not appear by using the shortcut

    Hello

    I am a fresh user of the A300 - 15K, and early on, I discovered that there the combination Alt + Ctr + c assigned from ATI (Catalyst Control Center) software. Unfortunately this combination should normally produce Polish character "to? (apparently not correctly on this page somehow after as I have copied from the word - it is stong focus on it - ' c' here is its capital version "-?").

    I am entered in the Catalyst Control Center and unmarked the use of keyboard shortcuts called (first this particular shortcut, then the use of hotkeys, usually), but I've reached this Catalyst Control Center stopped commissioning after the use of the combination.

    However, the necessary character of Polish does not appear. I can get the capital version with Ctr + Alt + Shift + c, but no normal version.
    A service center guy advised me to assign a different letter as combination of starting for the Catalyst Control Center and I did, but it was not the Polish character appear.

    I guess that there must be an error in the locale so I tried to change to English and Polish with zero results.

    Please help with some Word of the Adviser.

    Post edited by: Koster62

    Its easy to turn off.
    Simply enter the catalyst driver and there must be option as 'shortcut '. Turn the power off.

    I had the same problem.
    I remember that only it was really easy to turn off.
    You shouldn't have a problem with it.

  • How to create a new subfolder and do appear in the view files after you import the pictures inside?  The folder does not appear after that I imported the photos.

    I use 14 elements on Windows 10.  I would like to create new subfolders in the folder view as I get pictures sent to me.  I want to keep by date.  When I import from a camera it creates folders but when I try to import them from a subfolder I created with the windows file manager, it does not appear in the Organizer.

    RonHoward wrote:

    I use 14 elements on Windows 10.  I would like to create new subfolders in the folder view as I get pictures sent to me.  I want to keep by date.  When I import from a camera it creates folders but when I try to import them from a subfolder I created with the windows file manager, it does not appear in the Organizer.

    Don't forget that your left folder tree is set to 'tree' (the little menu icon on the right of the title bar).

    Click on the + sign to the left of the main folder to display subfolders with images.

    If you want to see the subfolders without all the media files, select the master folder and right click, then choose the last option to display all of the subfolders.

  • SVG image does not appear in the mobile version, but does in the desktop version

    Hello

    I am new to the use of Muse and have created one before site in Muse. I took screenshots to show the problem I'm having.


    I used Illustrator to create the image of the logo depending on whether I have save to SVG file:

    Screen Shot 2015-04-18 at 15.01.04.png

    As you have probably guessed, I used a clipping mask to insert the purple Mason image in forms and text (this may be relevant to the problem, I don't know).

    I then save out as a SVG with the following details as advised by Adobe:

    Screen Shot 2015-04-18 at 15.01.34.png

    Before moving into Muse, I File > place the SVG file. "Unable to generate thumbnail" comes in both desktop and phone:

    Screen Shot 2015-04-18 at 15.03.26.png

    Anyway, I uploaded to FTP message on my site. While SVG is perfectly displayed on my desktop browser, it not only shows any on my phone's browser:

    Screen Shot 2015-04-18 at 15.13.18.png

    This is not only happening on my phone, I visited the same Web site on several phone devices and the SVG image still does not appear. Ideas why this happens?

    Have I totally missed something on file formats for versions of mobile browser in Muse?

    Also - in illustrator, I saved the SVG logo for the mobile version as a SVG as SMALL as that I saved to the desktop version.

    Thank you

    Use a PNG file. I see nothing in your logo that would justify using nothing else. You're not scaling it, there is no interaction and everything that you do is hide some pixel data already. Forgive me, but using a SVG makes no sense at all. In addition one would need to see the file, but my guess would be that once more 'reactive' setting incorporates incorrect data. Wouldn't be the first time...

    Mylenium

  • Open file dialog box does not appear after a certain time in the latest version of Illustrator CC 2014

    Hi all

    Everyone knows a problem doing a file > open after using Illustrator for awhile? I select file > open and nothing happens after I used Illustrator for awhile. Doesn't seem to have any model, the open a file dialog box does not appear only so I close and reopen Illustrator.

    Thank you

    Ben

    benkop,

    There seems to be a bug in CC2014, that appears when you open Illustrator / place dialogue together for display column and sort by date. You can adapt it to display by name or a list of point of view.

Maybe you are looking for

  • How to disable the new software alerts

    Every once in a while, I get a window pop up on my screen, announcing that the new software updates are available for my computer. My action options are limited - download all, remind me later, and one more. These alerts are a nuiscance for me. Is it

  • Question about the security of my computer

    Hello There is another user on my computer and each time that this person uses it erases history, cookies, etc... which leads to my question. How can I know that this person is so that I can know if its dangerous? (I'm willing to something that allow

  • Satellite L30 - unrecognized USB device

    I am a pc novice, trying to help my mother to fix his Toshiba satellite L30 series.None of the usb ports seem to work. They all worked very well before. A printer is installed on this computer seems to be the only change, and it worked for a while.Wh

  • Report: FSX Acceleration & Windows 7 bug RC1 x 64

    I installed Windows 7 RC1 x 64 and Deluxe FSX + acceleration.My graphics card is 9600GT and CPU DDR2 RAM(This is why I chose to use 64-bit Windows 7) E8400.4GB.At that time, I was playing FSX and everything worked well. But a few minutes later, when

  • Service Pack 2 is not available

    After reformatting the hard drive with xp, trying to load service packs, but sp2 does not seem to be available.  All the info at Microsoft, explains sp2 must be loaded before sp3 can be loaded. is this true? I can not find anywhere sp2.