Service Pack 2 is not available

Similar Questions

• Vista Service Pack 1 is not available for installation

  Original title: Vista Service Pack 1

  I had started to install vista sp1 and cancelled the installation. Now, I want to install it. It is listed under "story updates" as cancelled but not available under updates. How can I reinstall Service Pack 1 of Vista.

  Download it from the Microsoft Download center:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a45652b1-E838-420a-b065-83960458e2ec&displaylang=en

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Vista Service Pack 1 is NOT installed

  So, I wanted to upgrade to Windows 7. Unfortunately my installer for 7 told me that I had to first install Service Pack 1. Large. I know I don't have because it does not appear on my list of Windows Edition. I try to get it from Windows Update, but when I search for updates, it shoots only other stuff (e.g. Office Genuine Advantage Notification KB949810), but the service pack does. I checked my update history and apparently this Service Pack 1 could not install and I received the error code 80080008.

  So I download the thing directly from http://go.microsoft.com/fwlink/?LinkID=139503, and when it finished downloading it disappears. Then I saved it on my desktop and when I click on it nothing happens. Can someone help me?

  Slurgly wrote: This would have to do with a question I had on several occasions with the installation of .NET framework 1.1 Service pack and the .NET framework through update 3.5 service pack?

  Yes, it's a possibility. These updates of .NET Framework are among a myriad of SP1 updates, like, for example, KB955430 & KB947821.

  But I'm more concerned about one or two other things:

  1. the error 80080008 is very rarely seen and suggests that an infection in progress hijackware is at the origin of the problem.

  2 Vista SP1 is available through Windows Update (for most users) since March 18, 2008 (SP2 since March 2009). It is very unusual that SP1 has not yet install on your computer again.

  How long Avast4 has been installed? What antivirus application was installed before you installed Avast and your subscription always news when you have uninstalled it in preparation for the installation of Avast?

  A Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  The foregoing, your best bet at this point may be to back up your personal data, format the HARD drive and do a clean install of Vista to get it then patched up to SP1 before you perform the upgrade to Win7.

  I doubted much that a repair installation (upgrade AKA on-site) would solve the problem. Speaking of which, have you ever done a repair for some reason installation any?

  PS: Free support for installation of SP1 problems has been available since March 18, 2008 through June 30, 2009. This support would cost you $59 USD per incident (or more) now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB936330 custody relocation, uanable to install Norton 360, error that it is not compatible because service pack 1 has not been installed

  Original title: KB936330 custody relocation

  After starting without error black screen display problems indicating "start with vista or run diagnostics" etc. I did a full restore. A few problems with windows update which has finally been overcome themsevlves except 1. Service pack KB936330 continued to come as needing to be installed although the "installed updates watch it 8 times successfully installed.". When I try to reinstall Norton 360 I get error that it is not compatible because service pack 1 has not been installed. Run Microsoft Fixit and found the updates installed in different place and has been corrected, but problem persists.

  Hello

  1. you receive an error message?

  2 are you able to install other updates successfully?

  Check out the following link to check the status of the Service pack installed on your computer

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can follow the steps in the following article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Important: The article mentioned above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the following link:

  Back up the registry      

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  To install Norton 360, you can follow the process.

  Step 1:

  You can try to completely uninstall Norton 360.

  Check out the following link to uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Check the following link to install Norton 360 again.

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Post back with the results for you help more.

• Windows service pack 2 will not install on my computer

  I have windows vista and service pack 2 will not install on my computer what should I do

  Start here:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366 TaurArian [MVP] 2005-2010 - Update Services

• Windows XP Service Pack 3 is not installed because of a missing file beetov9

  Windows XP Service Pack 3 is not installed because of a missing file beetov9... What can we do?

  See if aid that I pasted here from previous messages and noted the reference material.

  KrisT2 has a solution and gbhall was also a solution that can help you.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/351ca845-3df8-4C9F-B456-fbedf0abfa8a

  "When the 'beethov9.wma error' rises (about 1 1 / 4 h. in the update),
  Open Windows Explorer and navigate to C:\Documents and Settings\All
  Users\Documents, then right-click on Documents and make appear the properties, then
  the sharing tab check the box "allow network users to change my files '.
  You don't have to be logged on as administrator. Retry the copy. That's it - I
  don't know why either of you, technology experts could not have said it simply. »

  / KrisT2

  Other-

  This is a known bug 'Dumb MS' and very simple to fix. It is simply that the installer wants to put a bit of a music (the standard windows sound) file in a particular place, and the directory does not exist on some copies of OEM Windows XP home.

  You just need to create the folder he wants before rerunning the SP3 update. Not at the moment, I can't find a link to the exact thing, but if these directories do not exist, create them. You must be logged on as administrator user to do this.

  The file beethoven.wma wants to be in the folder "C:\Documents and Settings\All Users\Shared Documents\Shared Music".
  OR maybe "C:\Documents and Settings\All Users\Documents\My Music\Sample sounds\" on XP-Home Edition

  However, the "All Users" directory down may be missing or not have NO defined permissions.
  To fix it, right-click on "All Users" and click the option 'security '.

  Click on the security"" tab.

  Click on "Add..." »

  Click on 'Advanced... '. »

  Click on "search".

  In the list below, to select multiple click (Ctrl-click) to select:

  Administrator
  Directors
  "Your username".
  Click ok all the way out and try again.

  Last edited by gbhall; http://www.TechSpot.com/VB/topic127254.html 09/05/2009

• service pack 3 does not load because of kbdhid.sys in use

  service pack 3 does not due to kbdhid.sys in use, I was updating after a repair windows, service pack 2 is installed, but the service pack 3 will not get spent about 1/2 in point because it says the kbdhid.sys open or currently in use, and there is no way to remove or stop in sys.32 drivers as it says it is used and there seems to be no way of knowing What to use.

  Hello

  I suggest you to follow the steps in this link and check if it helps: http://support.microsoft.com/kb/949377

  Also check out this link:
  http://support.Microsoft.com/kb/950717

  It will be useful.

• Service Pack 1 will not install after that the pc has been reset to the factory settings

  At my pc reset due to problems of crashing and freezing factory settings, when turned on after resetting received masses of updates Service Pack 1 has not been installed, but it shows in the story as being successful. He reappears in the form of waiting for update installation, but when the terms & Condtions accepted the installation takes a few seconds, history shows successful but it has not yet installed. So I can't install SP2 to update Internet Explorer 9

  Hello.

  Thanks for the reply. I found a previous question with a similar problem as mine, there was a solution that I followed and was able to install SP1. I should have done this before my question!
  I also installed SP2. Resetting to the factory settings was a last resort due to a problem I was experiencing, but after installation of SP2 my original problem reappears. The problem is now in terminal phase and looks like a new pc.
  In any case, once again thanks for your help, I know where to go with future questions I have.
  John

• Windows vista service pack 1 will not update. I get Error 80070002.

  Vista - install a drive - error 80070103

  I am trying to install a disc and it says I have error 80070103

  I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002

  Hello

  See if that helps you.

  "Windows Update 80070002 error."

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  "If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »

  And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Vista service pack 2 won't install-error: "SERVICE PACK 2 has NOT BEEN INSTALLED.

  I recently installed Windows Vista Home premium with service pack 1 on my computer. Automatic updates advised me to install Service Pack 2. It seems to install properly, but at the end, a box if poster with SERVICE PACK 2 has NOT BEEN INSTALLED. DO NOT TURN OFF YOUR WINDOWS COMPUTER IS RE INSTALL YOUR FILES. I tried to install SP/2 3 times and I still get the same results.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Printing problems, when I go to search for a printer in windows, it says domain services active directory is not available

  My printer does not print. I rebooted the printer, but I still can't get it to work. When I go to search for a printer in windows, it tells the domain services active directory is not available.

  Hello

  1. is the computer connected to the domain?

  2 did you change on your computer?

  3. What is the brand and model of the printer number?

  4. is this a network or connected via USB printer

  Method 1:

  I suggest you follow the link and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I also suggest you to follow the link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

• Vista service pack 3 is not installed

  Vista service pack 3 is not installed

  There is no Vista Service Pack 3.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Service Pack 2 could not install, windows can not access the service install and slow computer

  Please help, I'm using Vista Home Premium 32-bit. I'm not very technical, and I think that my problems began some time ago when Vista Service Pack 2 Installation causing boot failure has failed and that I could not connect. I tried a fix by using the Startup Repair and was able to connect again, but now all my Vista updates since then do not install and now my computer is running extremely slow, constantly trolling.  I also have problems "windows service install could not have access. I have tried to reinstall Windows Installer 4.5 but says "update does not apply to my system. I also tried to unregister and re-register Windows install that does not work. When I try to 'upgrade' my installation disc vista, the option is not available. I think my computer is confused if it running SP1 or SP2. Also I can not install programs because of the installer, the service to publish a work around if needed. Thank you

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 2003 Service Pack 1 free not updated from the Windows Update Site Security.

  For all 3 months one of our Windows 2003 servers that are not on the service pack 2 not available updated safety when you go to the Windows Update site.  They are available to the malicious removal tool and the stop bits, but nothing else.  The 2003 SP2 servers work very well.  Can someone help me with this?

  Thank you

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919.aspx

  Windows Server 2003 communities above link.

  Forum tab at the top.

  This is the Forum for Windows Vista update.

  See you soon. Mick Murphy - Microsoft partner

• Service Pack 1 is not installed

  Cheque or updates, Service pack 1 available for installation. I run the update. It downloads and then extracted. Runs for about 1 minute then says installation complete.

  Go back to check updates, Service pack 1 is avaliabe again. It says it installs OK but does not work long enough. I have reset the updates, this is a load of frresh vista, the hard drive was corrupted due to format and reload.

  Hello

  Try to make the installation of these downloads...

  Service pack 1 for Vista 64-bit is here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21766

  Service pack 1 for Vista 32-bit is here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

  So for the 64-bit service pack 2

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=718

  or 32-bit

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15278

  Tricky