Image of Image deployment help locally

Similar Questions

• Download picture of URL link and store the Image in a Local folder in BB10 Webworks

  Hello

  I want to download the image of URL link and store the image in a local folder in Webworks BB10.
  But I did not get the code for this.

  If such knowledge code or have any solution then please help me...

  Thank you best regards &,.

  Laurent Subudhi

  NitishSubudhi wrote:
  I go through this code... but it is throwing the exception. That is to say "ReferenceError: Webworks is undefined '." "

  According to the device/operating system, you need to add the extension of your installation of WebWorks as explained here for OS SmartPhone BB or PlayBook OS.

  To use read the samples provided, they must work somehow. When I worked with the extension on PlayBook I only copy + pasted the provided source code and changed the attributes for the function call:

  // You need to define "remotePath", "localPath", "onProgress", "onError", "options" like shown in documentationblackberry.io.fileTransfer.downloadFile(remotePath, localPath, onProgress, onError, options);
  

  For OS SmartPhone BB the function call looks like this:

  // You need to define "options" like shown in documentationwebworks.io.FileDownloader.download(options);
  

  All think that all information provide here, try to follow and cela should operate.

• I can't install premium photoshop design.  Once downloaded and I click on the file, it says "unrecognized image' Please help

  I can't install photoshop Design Premium.  Once I spent hours to download and click on file, it says "unrecognized Image' Please help

  Download again using another browser and possibly choose a better location to download if the file is not corrupted.

  Mylenium

• Image: poster of local disk, download server and display the server file system

  Hello

  I use jdev 11.1.2.4.0...

  The requirement is that users want to upload images to their local drive for the drive on the server and they would like display of server disk images later.

  We do not want to save the images in the database. I'm not sure what should be the solution; However, I intend to...

  1 create a table to keep information from images - image_id, image_location (server drive), image_filename

  2. create a page where users can enter image information and specific file on a local disk name (I think I'll use inputFile component) and provide the Preview button to display an image on the screen before saving. To record data is to save the information in the database and copy an image file on the disk on server (the location for image files is predefined.)

  3. create another page where users can browse the database information and display an image for a selected record getting from the server.

  I need suggestions on...

  1. how to display an image on the page of the local drive?

  2. how to copy a file on a local disk to a server?

  3. how to display an image on the page of the drive on the server?

  Thank you.

  NAT

  See:

  http://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-1/

  http://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-2/

  http://tompeez.WordPress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-3/

  When Timo records the images in the database, you save it in the file system (examples on how to do this Java are available much if you just Google for it). Similar to Timo you then use the tag image to display pictures. The difference is that you can directly add the URL of the database table.

  The advantage of using a database to host images, it's that you're not although dependent on files server structures

  Frank

• Where are my views? I can see the image numbers, but no image. Help, please.

  Where are my views? I can see the image numbers, but no image. Help, please.

  Hi Rob,

  I just wanted you to know that I'm fine now... I just had to find the original files... must have moved a link or something?

  Thank you for your help.

  See you soon,.

  Lisa

• VCenter 4.1 connect to iso image on the local disk

  Hello

  I have a question about certain permissions in vcenter 4.1 until now, we have used vcenter 4.0 and we had a few asigned security role with permisions them following: all privileges: Virtual Machine: Interaction: configure support CD; Configure floppy Media; Interaction of the console; Turn on; Power off; Reset.

  It is basically the minimum requirements for some of our clients to witch we sell vps servers.

  My problem is: given that I've updated vcenter 4.1 security to configure cd media does not seem work apropriately. The only option witch is not grayed out is connect to the host device. The possibility to connect to iso image on the local disk or connect to the physical drive D: (local client CD-ROM) are greyed out.

  Someone knows something about this security role change and what kind of extended privileges do I have to add in order to make it work?

  Hello

  I think you should also "connection device"...

  In addition, there may be one advanced virtual computer that denies this capability... Here are the parameters of the isolation and many guides say to turn it off.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Windows could not load the installer of the image. Help please!

  My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.

  Thank you

  John

  Hello

  Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: Install the latest version of DirectX on your computer.

  Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
  (http://support.microsoft.com/kb/179113/ ) How to download and install DirectX

  (http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool

  Step 3: You can also delete the upper and lower of your registry filters and check if it works.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, locate and then click the registry key under:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

• image deployment failure t5570e

  Hi all

  I used HP Easy tools for 2 in pictures t5570e on USB 4 GB (one before making changes and one after) drives.

  I left the write filter when capturing the first and turned on during the capture of the second.

  Once done, I tried to apply the second image by booting from this USB key, which did not work.

  I'm getting to the stage "Applying system settings' to prepare Windows for first use is:

  -Windows could not parse or process to pass unattended Setup answer file [specialize]. Unable to apply settings specified in the answer file. The error was detected when processing settings for component [Microsoft-Windows-Shell-Setup]

  When I press OK the workstation restarts and gives me an error "the system restarted unexpectedly. Windows cannot continue the installation... ». Basically, he's stuck in the reboot loop.

  Same thing happens when you try to apply by default, before changing the image.

  Essentially, the thin client cannot start WIndows now. I wonder if it has something to do let me write filter on when the last capture image. Is there a chance that it is not able to write on the disc more and by extension cannot apply images? If yes - which would be a course of action?

  Or maybe I'm far...  Any advice will be appreciated.

  Thank you!

  I have this tri - downloaded the image default HP and deployed via USB - a key worked this time.

  Then a thin image customized using HP Easy Tools and captured using Capture State.

  Was now able to deploy 3 times online - certainly had)

  Modesty:

  Don't use HP Easy tools to customize and only thin State Capture to capture.

• I can not open the area of the Image, please help.

  But I try to open the area of the Image, I get the following message:

  "an outgoing call cannot be made since the application is synchronous call to entry.

  This happens regardless of whether I am online or offline.

  I use windows XP, have the last driver installed on my PC and have a new HP Officejet J4580 all-in-one printer.

  If I put my cameras memory card in my PC, the images are downloaded, but the area of the Image are not accessible.

  Can someone help me please? Thank you.

  Here is the solution I got from HP. I was very worried when a warning box appears saying that I would lose the program, but I took the plunge and it worked.

  However, it is NOT a permanent solution. All both times that I try to access Image box, I have to perform the solution below, but it takes about 5 seconds, so it is not a problem.

  I hope this works for you...

  My name is Robert of HP email support; It's my pleasure to help you.

  Your email, I note that, at the opening of the area of the Image, you get an error message. I'm really sorry for the inconvenience caused in this respect.
   
  Cause of the issue:
  ========

  This problem may occur because of all-in-one software.

  Solution:
  ======

  I ask you to perform the steps below to open the area of the Image.

  1. press the keys Ctrl, Alt and delete at the same time to open the Task Manager.

  2. click on the processes tab.

  3. click on the process of hpqgalry and then click end task to end the process.

  4. exit the Task Manager. HP Image Zone can now be opened.

  Now find the feature.

  If the problem persists then please uninstall the Image Zone software and install the upgraded version of the HP Photosmart Essential software

• FM2015 - suddenly, FM will display all .png, jpg or gif images! Help?

  Ran v13.0.1.385 when it arrived today and have loaded updated to 13.0.4.532 where it still happens.

  (NOTE: what happens on my main PC (Windows 7).) I have a laptop (Windows 8) that is also running 13.0.1.385 and the problem is * not * be there.)

  Worked on a few pounds, when suddenly, one of the documents shows the dialog box "can not display imported graphics" and showed a gray box. Usually, this happens when too much is running (in the past, at least) and FM would get cranky.

  Closed everything, rebooted, started to frame, open book, same problem - some images were the gray boxes (size of the anchored frame), some are black rectangles (size of the original image in the frame), and some have shown that the upper part of the image and the rest was black.

  Has taken a screenshot of the sample, stored in different formats, then imported the images into my doc to see what will happen:

  • .gif - displays the top of page 1/5 of the image, then the rest is pink
  • .jpg - shows the top of page 1/10 of the image, and then the rest is black
  • .PNG - displays the top of page 1/20 on image, then the rest is black
  • .bmp - shows very well
  • .PDF - shows very well
  • . TIF - poster very well
  • .PSD - shows very well
  • . VSD - poster very well

  The properties of the object for each image are correct (they are all in the same folder).

  If I double-click the offensive images, they appear well in Viewer photos Windows (.jpg/.png) or IE (.gif).

  If I change with an application (for example, Photoshop), they open fine for publishing.

  If I print the document in pdf format, the images will be displayed as indicated above (gif/jpg/png appear as boxes of pink/black), all others appear very well.

  Help? PLEASE?

  :-)

  Thanks in advance for your suggestions.

  Sidenote: Since these are the only types of image using the default Windows Photo Viewer watch a program, I thought I'd pass the default settings of Photoshop, to keep everything "in family". Cannot change the default, stays in the Windows Photo Viewer.

  OTHER STUPID SOFTWARE!

  I downloaded a software yesterday that I needed for the work, do not remember what it was. He installed an application (without telling me) who was supposed to be a malware scanner. (Just saw him in "Uninstall or change a program").

  Uninstalled. (Don't remember the name, sorry.)

  In the framework, and display images fine now. PDF generates very well now.

  Sorry for the grief.

  SOLUTION to THE PROBLEM: what frame suddenly begins to * not * do what he did very well, check if new applications have been installed and remove them to see if they are the cause of the problem.

• Moved Lightroom 5 catalog Previews.lrdata file on hard drive external now missing Images! Help!

  Hi all

  Help, please.  To try to free up space on my MBP with 128 GB SSD, I moved the file 'Lightroom' of my 'Images' folder to my DHM.  When I open LR could not find all the pictures, so I moved the file to my MBP and back in the folder "Images".  Only problem is now there is a charge of missing images last year.  I have all my CR2 files on my DHM so, luckily, I still have the physical copies of the originals, but all my changes disappeared.  I spent dozens and dozens of hours editing family shots and other photographs and I'm very nervous that I may have just lost all?

  Please please help...

  Thank you...

  I can't answer the question about missing images. However, after you move the Lightroom for the EHD folder you open that folder and double-click the catalog file in its new location. After that, if you have preferences in Lightroom configurΘ for the most recent dΘmarrer Lightroom Catalog use the catalog located on the EHD.

• Construction of several slides/images - need help!

  Hello, I have only recently started to learn AS3 and have been unable to accomplish what I consider one of the most simplest tasks, create multiple images/slides. In fact, I was unable to conclude to the existence of what I consider to be a core function.

  I want to set up multiple pages, with a 'go to the next page button. For example:

  Executives Dias/1
  Go to the next slide button

  Now, when the user clicks the next button slide reach I would like the following to appear...

  Slide/Frame2
  Go to the previous slide, the button

  Noting that I don't want the scripts of the first frame/slide or objects are present or active on the second picture/slide.

  Thanks for the help.

  on your first image place a next button and previous button (for example, next_btn and prev_btn).  expand the layer that contains both on the scenario you want to act as a slide show.

  Create a new layer actions and add the following script:

  Stop();

  next_btn.addEventListener (MouseEvent.Click, nextF);

  prev_btn.addEventListener (MouseEvent.Click, prevF);

  buttonVisF();

  function nextF(e:MouseEvent):void {}

  nextFrame();

  }

  function prevF(e:MouseEvent):void {}

  prevFrame();

  }

  function buttonVisF (): void {}

  next_btn.visible = prev_btn. Visible = false;

  {if(this.currentFrame>1)}

  prev_btn. Visible = true;

  }

  If (this.currentFrame<>

  next_btn. Visible = true;

  }

  }

• No preview image deployed when you try to import new images, no possible imports all the

  Hello

  I use Lightroom 5.7.1 on a 'Late 2012 iMac' with Yosemite OS X.

  I installed Yosemite first and then Lightroom 5.

  After that I encountered the first problem (no preview images shown the import module when you try to import new images, the central part of the screen remains black, now shaded not extracted, nothing, no possible to import at all), I tried all possible changes to checkboxes and preference settings.

  After reading dozens of Internet Forum articles on very similar problems seem to many other users, I even deleted all preference setting files in the OS X Finder (a recommendation that has been said to succeed), however, the problem remains.

  Also, I completely deleted the software entirely from my iMac (including all the system and setting files), downloaded the latest version (5.7.1) Adobe, rebooted the system, installed new Lightroom, even restarted again, WITHOUT SUCCESS.

  What could I do? As I can't work at all with Lightroom, I would be very happy to get any help on this issue.

  Best regards

  Thomas.

  If the Destination Panel does not appear.

  You must make the Destination panel displayed on the right side by right-clicking one of the other items Panel (like "file management") and then place a check next to the Destination

• side is applied to ALL, not only the active image - please help.

  Seemingly out of nowhere a particular feature in LR ceased to behave the way she normally does it for me.

  When I'm in the notice of inquiry (in library mode) and I have a number of images selected because I'm doing my selections, it suddenly started apply my star rating for all 10 images, I chose and not only the one that is active . It's very strange - I've never seen behave like this before. I don't remember hitting something or change any settings, but he just seemed to have started from nowhere.

  It seems that if I 'manually' click on the star scale that appears when you mouse over below each image, THEN it will apply to the star to just an image, but I can just is more hit the '5' - key and have just an image which is active get 5 stars. He does it at all.

  I tried just to restart LR, but which has not changed anything. Please please help as this is really mess up my workflow.

  Thank you

  Robyn

  I visited the next page to confirm that it should indeed not be behave in this way:

  http://help.Adobe.com/en_US/Lightroom/using/WSEEE8FD0F-DFD8-47D0-A6FE-DD726E5F2E1A.html#ws 11A1E98C-3D8D-47b5-8335-4B9D8C3A5D36

  It is in the middle of your list on your screenshot, but you two select two files to make it active, so you can clear the check box.

• RAW IMAGE EDITING - help required

  Please can someone help me with this.

  I look at my RAW images in the organizer and then I use the tap EDIT to go to the editing section of RAW IMAGE with the image that I want to change.

  After I edited the image - I propose to MODIFY the image by hand of the screen and then save as a Jpeg file in another folder.

  The problem I have is when I go back then to the Organizer, I can not open the unreleased original RAW image once again, don't know why this is?

  Although I see a little Touboul-nail image, it opens but continues to research.

  Can someone tell me what I am doing wrong?

  Thanks in advance

  DJ-that's what I don't understand. How can the photo was moved in all the other photos are still there? This happens only in the photos that I am editing and recording with a different name

  Original photos will always have the same original name with a. Extension of RAW and should remain in the same file. I use the option "Save as" to save as Jpeg extension.

  They do not have a question mark on them but rather the icon "Edit" the "duplex of a box with a brush' in there.