Image of map / hotspot / something else? Not sure of the terminology

Similar Questions

• Hi, I currently pay monthly to the handset Lightrrom 5/Photoshop but I need to be able to merge several images in "Merging HDR" but is not one of the options I can choose currently highlighted.  I guess I'll have to move to Lr 6 but I"

  Hi, I currently pay monthly to the handset Lightrrom 5/Photoshop but I need to be able to merge several images in "Merging HDR" but is not one of the options I can choose currently highlighted.  I guess I'll have to move to Lr 6 but I am struggling to see online how to change the plan?

  I suppose you're running a 32-bit Windows version - if PS CC 2015 is available but LR CC 2015 is not.

  Help / System Info in LR 5 and look for Application Architecture and System Architecture a few lines down in the list of information.   Something with a 32 or x 86 is 32-bit.  Something with x 64 is 64-bit.

  You will need a 64 bit OS to run LR CC or LR 6.

• A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of ram.  Any suggestions on what would be a reasonable price?

  A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of RAM.  Any suggestions on what would be a reasonable price?

  This isn't a topic appropriate for the forums. We only used the material price. Visit eBay to find this information.

• Wanting to buy g770 but not sure of the difference

  I want to buy the G770, but I'm not sure what the difference between the $519 and laptops for $719. Could someone please inform me on what exactly is the difference in every laptop or direct me to where I can find.

  very appreciated

  hope this helps:
  http://www.Lenovo.com/PSREF/PDF/3book.PDF

• Of image processing and machine vision do not appear in the function Palette

  Hello

  I have the problem and I can't solve

  Of image processing and machine vision do not appear in the function Palette, although I have implemented NEITHER imaq and NI Vision Acquisition why?

  Can someone help me?

  Vision Development module is the package that contains the entire library of Vision.

  http://www.NI.com/LabVIEW/vision/

• I forgot my password and not sure of the answer to my secret question so impossible to singin' or reset the password

  Hey there, I got my password of windows live account * address email is removed from the privacy *, I'm also not sure of the answer of the secret question... but my what is important, I still have access to my email in this account, and I think it would be useful to reset my password accouns, HELP

  Please carefully follow all of the steps on the Recovery Windows LiveID account Help Page.

  Sorry, we can not help you with your Hotmail account number in the Microsoft answers Forums.

  Kind regards.

• Someone from the Tristate MJ (not sure of the name), called, saying that it represents the widows team of Microsoft Support.

  * Original title: MJTriState

  Someone from the Tristate MJ (not sure of the name), called, saying that it represents the widows team of Microsoft Support. They had followed my computer (Windows 7) and noticed problems with it because it was very slow at startup (TRUE). He said that my computer has been hacked. He gave me my product windows (OK) key and me had discovered my event log that have trouble with my printer. Then he asked permission to take over my computer and fix the problem. At this point, I hesitated.

  The question is done Microsoft outsource monitoring Windows 7 computer in trouble. It seems very likely.

  Dennis

  As already mentioned: it is a scam.

  You can read: beware of fake Tech Support scams

• Not sure about the best way to structure my app.

  Hello

  I'm not sure of the best way to structure my app.

  I have a main menu that links to 3 submenus, each a link to a number of pages. Initially when I clicked on a menu button, that he would open a submenu instantly and then clicking a button, the page open instantly. And return to the previous menus was also very fast.

  But at some point that he started getting really slow. I click on a button in the main menu and he thinks for a while before moving on to the pick-me-up submenu is too slow. I'm not sure why and I lose a lot of time trying different ways to do it.

  So what I want to know, as far as efficiency goes, should I create the main menu and submenus 3 at the start of my application, keep these same objects active and just pass pointers to them around like settings and pop on and off the screen of the battery when required, or should I just create them as new items whenever they are needed?

  Any advice on this would be greatly appreciated.

  If each submenu returns to the main menu, just use the screen for the navigation stack. Don't forward mainMenu for the submenus; to return, just pop the submenu and the main menu will be back at the top. At the time of mainMenu wants to open a submenu, just push without fun first.

  Have you thought to check for memory leaks? There is a discussion of 3 parts of this by Kamen:

  How to find that leak memory (part i)

  How to find this memory leak (Part Two)

  How to find this part of memory ((troisieme leak)

• Images JPG, stored in DB, are not displayed on the screen/image.

  Hi friends,
  
  I have a form to save and retrieve images (JPG, GIF, TIF) to and from the DB, using WEBUTIL_FILE_TRANSFER. CLIENT_TO_DB and CLIENT_IMAGE. WRITE_IMAGE_FILE respectively.
  It works fine, but with few JPG images, it stores in DB, but not displayed on the screen/image.
  Second, if I try to retrieve and write the JPG to the operating system (using CLIENT_IMAGE. "" WRITE_IMAGE_FILE), he invited error "FRM-47101: cannot write the file image.
  
  Environment:
  Forms [32 bit] Version 10.1.2.0.2
  Operating system XP Pro 2002 SP3
  Oracle DB 11 g Enterprise Edition rel. 11.1.0.7.0 - 64 bit
  
  Any help will be much appreciated.

  Hello

  Some recent JPEG formats are not supported by the forms. I can't tell you exactly what, but I have already noticed that some images could be made only by the forms. The only solution is to save the images with another program to transform the internal format to a recognize an or use a Java Bean able to read all of these formats.

  François

• Adding a folder zipped to the project, not sure of the process.

  DVDs and I wanted to add a folder zipped containing the content in mpeg2 format so that users were able to enter the folder, unzip it and keep a digital copy of the video/pictures.  Unfortunately, once again done with transcoding/writing, he of the disk write-protected.  I'm new in yet, and I'm not sure of the process more efficient, so I was wondering if I could:

  (1) add the folder to the procedure, so once the writing has been done there is the VIDEO_TS folder and the zipped folder "Digital Content".

  (2) change an option that would not immediately hand writing and eject the disk, so when transcoding and writing was done, I could add the folder and then finalize the disc.

  (3) add the folder on the disk before you start construction again, and once the build completed two files would be there.

  Thanks in advance for the help!

  What you're looking for is the content of DVD ROM and simply navigate to the location of this folder on your HARD drive, before to burn to disc.

  Good luck

  Hunt

• Virus or Trojan or something else that will activate the guest account?

  My computer is very slow, and every time I wake it from sleep I notice that the guest account has been enabled.  So I go into Control Panel and then users and groups and disable the guest account unblocking of the user and groups with my password, remove the check mark beside guest account and lock user accounts.  However, even if I am away from my computer, the check mark next to guest account gets back and the guest account enabled.

  Nobody else uses my computer.  Does anyone know of a Virus, Trojan, Bot, or anything else that might be my computer hijacking.  I have ClamXav, but nothing was found after several scans.  Help please.

  It is not a virus. Viruses don't do that sort of thing.

  Earlier, I think I've found that putting on find my Mac would automatically allow the guest account. Not sure if this is still true today. You can check by turning off to find my Mac, disable the guest account and then verify.

• Why when I put another image instead of the first image in tabletFirstTemplate logoImagePath it does not show in the browser.

  Mr President.

  If I want to change the image that I put first in the logoImagePath in tableFirstTemplate then this second image does not appear in the browser.

  But when I put the previous image that I put on the first time, this first image appear in the browser as usual.

  But any other image if I want to put in place the first image does not appear in the browser.

  It looks like bellows

  

  No reason for this behavior of the logoImagePath.

  Concerning

  Remove the deployment folder, restart the weblogic Jdeveloper/Integrated Server and try again.

  Refer

  Java ADF Webcenter UCM Weblogic SOA: ADF: clean your drs, SDM using Script file

  See you soon

  AJ

• Newbie Question, Ripple, Roll, something else?  What is the right tool?

  I learn Premiere Pro and struggling to find the right tool to use.  I have several short clips in an order and I want the Cup to the rhythm of the music of the time.  Is there a tool or the trim method I can use to adjust the end of clip and the beginning of the next clip, without affecting the start time of the first, or put an end to the second?  I hope that makes sense.  I have two clips, together they start to 1 sec, end to 5 dry and cut in 3 sec.  I want to pass the cup of 3 sec 4 sec and does not affect the beginning or the end of the two dry 1 and 5.  Thanks for any help!  I think I need to use the ripple or roll edit, but just not sure after having look at some tutorials and experimenting on my own.

  Thank you

  KYle

  Adobe Premiere Pro CS6

  Windows 7 64 bit

  Looks like you want the bearing Assembly. You can hold the CTRL key and move the mouse on the Assembly of the change by clip 1 and 2. the cursor must be red and have arrows pointing in both directions. Click and drag to change change it. This will change at the end of the clip 1, the beginning of the clip 2 (cut in 3 seconds in your example). but keep the beginning of the clip 1 and the end of the clip 2 and the duration of the two combined for your example of 5 seconds.   You can also use the trim edit mode, according to richard. Just hold the CTRL key to access the double red cursor arrows and then this time on Assembly changes. This opens the trim mode in the monitor and you can use the buttons in there to adjust the edict.

  a ripple editing will be cut extend clip 1 and move the clip two and all the other clips continued to fill the void backwards or forwards to make room for the long pliers 1. where you want to clip two endpoint to stay such as 5 seconds, it won't work. Ripple will change the location and duration of the two clips, 5 seconds in your example. CTRL and the yellow slider about to edition is this training mode.

  a regular edition trim does not move other clips, only the selected clip. However, it is not automatically expand or shrink the adjacent clip. leaving a space if the shrinkage.

• Some images are centered, but others do not, even using the same tag div

  I have a background image that does evolve upward and down to match the size of the browser, but I can't keep centered content. I have an image of the logo, below which is a container of text and below that is another image. The text container remains focused, but not the images - they move to the left, but with different proportions.

  www.ShredSkins.com

  Fair warning: the code corresponding to the index page and style sheet is really mixed up. I tried a lot of different things with different names (so I can easily go back to a previous combination) and when I get home from work index I can remove everything and do it cleanly.

  Thank you!

  Add this to your CSS code.

  IMG {max-width: 100 %}}

  Then, remove all the attributes height and width HTML of your tags.

  This will result in images that resize available.

  Nancy O.

• Design of a logo for a client, when they are not sure of the intended use

  Hello

  Can someone tell me a good "rule" in the design of a logo for someone who does not know what size they want to use this logo in the future? If they do not know what print size they can (business card size or more big sign) - what size is the best to give them AND if they don't know what web size they need, what size is good to give them where they have room to resize? What format is best, I? or pdf?

  This is especially a concern if the logo is done in Photoshop. Any suggestions on standard dimensioning or normal practice in this case? Thanks in advance - K-

  In general, I would like to put the logo to any size that fits on a format sheet paper letter so that the customer can easily print on almost any printer of office as is. If you are an Illustrator *.ai or EPS file without linked or embedded, bitmap images then you don't need to worry about the final size in its various applications, as it will scale without loss of resolution. It can be used for a business card or a billboard.

  If this is done in Photoshop, then you can start with a master file which is enough PPP resolution larger size of the logo of the application. Then, you or the customer can downsample from there. (But since we are in an Illustrator forum and not a forum for Photoshop, I'll show my prejudices Illustrator here and recommend that you use Illustrator for logo if possible work ;-)

  Always handy to give a customer a PDF and JPEG version in addition to .ai or .eps files in case they do not have a Postscript printer or Illustrator.

  Others may have standard practices to suggest.