Image placement issue

Similar Questions

• Image placement

  Im having problems with the placement of images. At the top of the page, it seems that the image is slightly to the left.

  http://www.Humboldt.edu/CICD/index.htm

  This could be a browser issue? I am currently using Firefox. I also noticed that when I discovered this in Internet Explorer, it looks like junky. Y at - it an easy fix?

  Looking at the page I would say green background image is NOT centered.

  I would remove the padding-left: 54px; the ContentWrapper CSS (I commented it see below)

  Then set the width of the ContentWrapper on 740px wide the same width as your masthead images.

  Then I would make sure that the white area in the center of the green background image is 740px wide.

  #ContentWrapper {/ * actual wrapper for any content * /}

  position: relative;

  display: block;

  margin: 0 auto;

  Width: 740px;

  text-align: left;

  do-size: 90%;

  / * padding-left: 54px; * /

  }

  Also it does not appear as if you have need of the

  container that is just before the opening of Mission
  tag

• Images and issues correspondence

  Is there a way to Captivate for adaptation issues to have make a text for image matching?  I am wanting people to match the image of a city with the name of the city and unsure of how to do it.

  Thank you!

  Yes, I agree, you can do this if you choose to not mix the answers and without sliding table.

  While creating the rescue of the slide, the size of the text subtitle in column 2, such that it becomes invisible. Insert the images in the slide and place them in front of the index in column 2. Now, agree with the text in column 1 to correct the images in column 2.

  Published slide user can answer this question by entering the index number in the text field 1 column.

• Import of images without issue, his plays but video is still framing

  I just bought me first Elements 10 because I had hundreds of GB family videos made by my JVC GR-D325E.

  I imported the to my PC with Windows utility given months ago and before I bought PE, I checked mounting possibilities with the body test version already without any problem concerning the import and use of images. So I decide to buy PE to edit home videos private.

  Now, I had two problems.

  A. when I move my camcorder to my Windows PC is able to scan, display Organizer EP there is no camcorder attached while windows can find it. When I open PE instead of PE Organizer I can find the camcorder by right click and import a film, what can happen?

  I have attached two screenshots to this question, one showing that organize will not find the camcorder, which shows that react PE differently allowing me to scan the content of the camcorder... found the two screenshots when he made the moment even without editing the connection of the camcorder.

  

  B. the other (bigger) problem is that all the imported footage usually use the dvsd codec and when I import the images (no do not based on possible problems of size) in PE via right click dialog box I can import without any problems or error message but when I want to edit, or simply to play the content of the framework of treading water and just the sound plays well. When I do a movie of her without taking notice of this behavior the result achieved the same effect of structure yet.

  

  What is the problem and how can I fix? There should be a way that PE would otherwise useless for me.

  Please give me a hand to solve this issue in time.

  Thank you in advance.

  Yours,

  Erik

  PS: Is PE, the only way to make a movie, the option "Freigeben '? What for is the off-greyed under file export option?

  This file works perfectly in my PRE10 so there may be something else is happening with your system.

  I created a project DV PAL standard, slide the clip in the project media Panel, and from there to the timeline. PRE message wrong project implementation (because the clip is a Type 1 DV - AVI and (b) because it has a 16:9 aspect ratio display). Accept its recommendation. Try to copy this workflow and see if it makes a difference. If she does not take a glance at the following:

  You have a problem? How to get started

  FAQ: First items on hold, or crashing - some tips

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Image size issues

  Hey guys, I have a picture that I took with a camera. When I open the image in photoshop, I put it at about 17% zoom 400 resolution, about 10 inches wide by 8 inches tall. I used the marquee tool to select a specific item in this picture. I continue to shrink the image of origin (overall) in the hope that I will get this point to the size I want, but no matter how I try, it remains the same size when I paste into the new document (I created a background to import in indesign). I change the size of the original image but when pasted into another in photoshop it does not change the size of the single element, how do I change the size of an element when paste it? Thanks in advance guys.

  Paste? There is your problem.

  Save is as a PSD file and use the file > place command to get it into your document.

  Bob

• Image/image placement InDesign CS5

  I just upgraded to CS5 and have nothing else had problems with all programs. BLAH! But for my problem urgent.  When I try to place an image or a graphic in InDesign, it puts a cropped low resolution image. I have to manually resize it to its correct size and expand margins on the chart area. I've purged my preferences and reinstalled. Nothing helps. There may be a setting that I am not aware of that I've set wrong? Any help would be appreciated.

  With nothing selected, got to object > Frame mounting... Options and see if something seems wrong.

  This file was made in a previous version of ID? If you export to .idml will help: http://forums.adobe.com/thread/526991

• [CS3 Server] Problem with image placement

  I use the kImportAndPlaceCmdBoss command to place the text and images in my document.

  With the text, it works correctly, but when I try to place the image (jpg) I got a gray rectangle instead of the image. Order processed without any error message.

  What is the correct way to place the image?

  Search the IServerSettings directly from ISession, make changes through IServerSettings.  See the documentation for the methods, etc.

  Ian

• Image Podcast issue: error message

  I've worked with people very intelligent two for two days and we cannot figure out how to get our podcast released on iTunes.

  • We have the site host (software library).
  • We posted on Tumblr.
  • We put it through a feedburner to extract the RSS.
  • We did our image 1500 x 1500, which lies between the 1400 x 1400-3000 x 3000 settings.

  We always get this error message and can not work our way around it.

  Podcast work must be understood from 1400 x 1400 to 3000 x 3000 pixels, JPG or PNG, in the RGB color space and hosted on a server that allows HTTP HEAD requests.

  Any advice would be SO greatly appreciated. Currently, we organize our picture on a site public squarespace. This is a jpg.

  It is not really possible to comment unless you post the URL of your feed - if you have more than one, the version that you propose to submit to the iTunes Store.

• Frequency image-refreshing issue

  Hello

  I had this problem: I have display 3 different images in a sequence. Entire sequence 1 last second (0.3333 by image) and will be continuously repeated. During this operation, I have a few display problems - some occurs flashing white in the photos. It is difficult to see because photos have black background. These flashes appear as white strips or fields oriented horizontally in a different part of the picture. I think that it is a refreshing question, but I'm not sure about this and don't know how to check. I failed to do screen capture of these hot flashes, which seems to confirm that this displays some question. I want to know what you guys think about this, if it can be solved, it's my hardware problem or some sort of limitation of LabVIEW. I checked it on 3 different screens (screen of my laptop, my PC LCD screen, projector) with a refresh rate of 50-60 Hz and the results were the same. I tried with different image resolutions and I think that these hot flashes are more common in the larger images.

  I enclose all VI I use to display these images and pictures of reference for you to check if you have this problem.

  A few words about the functioning of this screw:

  There are 2 screws - order one and displaying a. I need the way I want to have images displayed on the second monitor, while being able to adjust front on the 1st monitor. So there is this VI display which shows only images and VI Controling that defines all parameters. To get this to work, you must open with VI and do turn. Then you open ControlingPredefine or ControlingGenerated, the value:

  Interval (time between photos, 333 change is my case).

  Path to VI (this must be the path of the VI to display)

  Monitor (0 - main screen, 1 - second screen if you have.) I did it this way I was check with features different monitor (laptop vs single computer laptop + projector))

  and run it. When set correctly display Vi should be enlarged on the set of monitor in the monitor control and display 3 photos in the meantime

  There are 2 screws in order:

  Existing predefined on jpg images work chosen hard drive (there are 3 additional controls of path that must be resolved before the race)

  Generated generates images in real time, you can choose between 2 figures (square/circle) and set of 3 sizes (each for each photo in the order)

  Controling Vi stop button stops the two screws (control and display).

  I am attaching 2 photos (small and large) made in the painting series.

  My version of LabVIEW is 2011

  Hi Chudy.

  Can you please turn off the property picture "delete first"?  As long as this option is set, the image will erase whenever you write a value to the image.

• Image Factory issues pure Edition 5.0

  Hi guys!

  Just a tip:

  The official factory image 5.0 (LXE22.46 - 11) posted by Motorola seems to have some problems. After the flash of the image, shows the status of software in the bootloader: changed. It should say: official.

  Also, this factory image does not get OTA 5.1. I checked with a logcat and saw errors on fingerprints do not match build, so the OTA Download not the same.

  The OTA is expected as this print:

  Motorola/victara_tmo/victara:5.0/LXE22.46-11/10:user/release-keys

  However, the official image of 5.0 that is displayed is:

  Motorola/victara_tmo/victara:5.0/LXE22.46-11/11:user/release-keys

  
  

• Recreate the image MARCH issue 20

  When I try to recreate the image on my device on 20 MARCH with the ISO collection downloaded from the OCC and I burn the ISO as it says when booting from the DVD it gets to the menu to choose how I want to recreate the image and it crashes.  We never saw this, and how solve you this problem.  I had 3 different devices and they all do the same thing.

  Hi James.

  When I try to re-image my MARS 20 appliance with the recovery ISO downloaded from the CCO and I burn the ISO as it says when booting from the DVD it gets to the menu to select how I want to re-image and it locks up.  Has anyone ever seen this and how did you fix it.  I have had 3 different appliances and they all do the same thing.
  

  You are connected through the Console directly (VGA + PS/2 keyboard) device, right? If you are using a USB keyboard, try a PS/2 keyboard instead.

  In addition, if it is a model CS-MARCH 20, make sure you select option '1. Distributed March - controller Local", not the #3 option (i.e. option valid only for models generation material 2)."

  If none of the foregoing is the cause, then it looks like a problem with the burned disc.

  • Verify the signature MD5 from your local copy of the. ISO image file matches what is shown on cisco.com.
  • Re-burn the ISO image to a disc up, forcing a 'slow' burning speed (4 x or less), try a different brand of media as well (I ran into a few cases where when other media brands have been used, these types of questions went).

• InDesign CC 2015 re-edit the link image dialogbox issue El Capitan

  Hey, I just started to test InDesign CC 2015 with El Capitan. Now, the first problem occurs: if I want to create a link to an image has more info on the name in the image dialog box. Does anyone else have this problem? Is it an option not enabled in the Finder? I can't find any option to enable this bar on the top of the dialog box.

  For your interest: I disabled 'automatically hide menubar' in the El Capitan systempreferences. It is not possible for me to work without this info... I have attached two screenshots of the box of Mavericks, the other at El Capitan.

  Mavericks

  

  El Capitan:

  

  My profile so it can help:

  15-inch Macbook Pro mid-2014

  2.8 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  NVIDIA GeForce GT 750M 2048 MB

  OSX El Capitan 10.11 (A 15, 284)

  InDesign CC 2015 build 11.1.0.122

  I am pleased to announce that the name of the missing file in the dialog box to repeat is now fixed in the latest version of InDesign CC 2015.

• Put e-mail in place issues.

  I want pictures by email, but after an Adobe technician remotely tinkered with my settings I can't send anything at all now! I understand that Gmail is not tied with Lightroom 6 for the moment, so a previous tech from Adobe installed my account hotmail on the settings that worked well. I am now in a situation where I don't know what to put the fields required to activate again my e-mail address. Can anyone help please? Thank you.

  Hello!

  Google is one of the default messaging services in Lightroom, so you'll need are your ID and password to put in place.

  

  Click on the Add button in the e-mail Accounts Manager, enter a name that you want to use in Lightroom and choose Gmail as a supplier. Click OK.

  

  In the next outgoing server details screen are already filled in. Fill in your credentials, and then click Validate. If the light turns green then you are ready to send the email from this address.

• Self-image-key issues

  So I see I'm not the only one having problems with self-image-key option. After finally finding the icon isn't where it was like each instructional video and reference book that I found is, which led to much confusion and aggravation here, I learned was for some reason, was transferred to the drop-down list.

  Here's the catch, it is already activated and go on no matter what he says in this menu drop-down AND it was already without the icon visible. If it wasn't, I wouldn't be looking for how to disable? !!

  Someone has an idea of what's going on? Why is it not just and icon on the menu bar, as other choices. Personally, I see both as useful. And more than any other, that big red hot for you reminded that it... is very useful in itself.

  Above all - and please keep in mind that the dropdown on the left does NOT-how to disable the auto-keyframing?

  Thank you

  Jim

  Keyframes now arrive with any adjustment

  This is the way that after Effects always worked, long long long before the self-image-key function has been added.

  Step 1: Activate the stopwatch time - vary for a property.

  Step 2: Change the value of this property to any point in time.

  Result: A keyframe is created. If a keyframe exists at this moment in time, its value is changed.

  If you're new to After Effects, I encourage you to go here and start reading: http://adobe.ly/AE_basics

• Darkens image placement document

  As the subject says, when I put some images in my document, darken all the content on all pages.

  That's what I managed to know so far:

  • He darkes all when that happens, text, other photos and items (sets) of the master page. The master page itself is not affected.
  • Some png with transparency (white background) does not obscure the images.
  • Some png without transparency (filled background) darken the image. I used these pictures in other documents and they do not darken the page then.
  • Some png with transparency darken the image
  • Jpg does not appear to affect the page at all.
  • It does not matter if I put the image on the page or outside on the editing table (alas, there nothing semi transparent covering page that I can see).

  Help?

  worldwidewerner wrote:

  I see I forgot to add a point: I was thinkihg this as well, but the export of PDF had the same error.

  As I said, this is a display problem, and it will show in the PDF file on the screen and low-resolution printing. I think that you will find that, if you use the exit Preview to check the numbers that they have not changed.