Image "use original size" is incorrect scaling

Similar Questions

• Are there already experiments with FM 2015, scaling of the image to its original size in the HTML output

  FM 12 provides the following procedure (as read in the manual) to see the images in original size in the HTML output. I did and was happy. But now in 2015 of the FM, the operation is no more.

  > >

  In the Setup file (settings.sts) you can set the image (default size) the parameters width and height to 0pt so that images in the HTML output are displayed in the original format. FM 12 it worked fine. The result was, that the style to the statement tag < img > is deleted in the HTML code output, so that the images keep their original size. But now in 2015 FM it seems there is a bug. The same procedure has the effect that the style statement is in the HTML (is not deleted) and width and height are on 0x0pt. The result is that all the images are invisible. If I disabled 'Preferred size' images in the HTML output are always scaled down in a 'random' size, nobody knows where it comes and how I can trouble or spend that in 2015 scaling of FM.
  

  > >
  

  Anyone who has ever even erperiences with the new 2015 FM?

  THX
  

  Hello

  There was a bug in the publication process of FrameMaker for which we had planned a work around to set the width and height 0pt. Now we have fixed the issue when you set 0pt as the width images will no longer appear.

  Now in your output images will seem to have the same size, such that they appear in the documents of source if preferred size is not defined. If this isn't the case, you can share your example of source document so that we can have a look.

  Thank you

  Ritesh Kumar

  [email protected]

• Unable to save a slice with the original size using save for Web

  Hello

  For some odd reason, I can't increase the percentage more 45.84% in the section of the dialog Web Image size, save for

  so whenever I have save a slice, it ends up to half the original size.

  

  I remember ever change a setting that can get there... How Photoshop could prevent you to save your image in original size?

  Please help me. I manage to get the slice in the original size now to meet the deadline for my project.

  As far as I know, photoshop for the web economy imposes a limit of size about 8182 pixels height or width and if the range or image is larger, save for web shows that the image/slice has been resized.

  The strange part is if is not a click on one of the options the Image size, the image/slice seems to be saved in the original format, even if it is greater than 8192 pixels in height or width.

• Return an image to its original size?

  Hello world

  When you try to sort the page layouts in indesign, I very often zoom photos until they fit properly on the page. But is there a way to reset the original size of the image without having to re - import when I want to try a different size?

  Thank you

  Chris

  Edit > Preferences > General > during the measurement: adjust scaling percentage.  I suppose that some users have a reason, but I do not understand why it is not the default value anyway.

  Then when you resize it the percentage bar will show how much is climbed by.  To get it to how it was originally simply use the menu drop-down and click 100%.

• What is the best way to resize an image, but keep the height and width of the same original size or format?

  What is the best way to resize an image, but keep the height and width of the same original size or format?

  I tried to use the function of the size of the Image, but when I changed the size of the image, the width has not changed with it.

  Thanks for the tips!

  Hi Landon.Luu,

  You want to keep the relationship between the width and height to be the same?

  Click the constraint between width and height to keep the ratio intact.

  

  Kind regards

  Claes

• How can I place several smaller images of varying size on one page for printing without losing the original size.  Board contact option to resize my pictures

  Does anyone know how to place several small pictures on a single page, so I can print them out as a rather print over and over again.  I want to maintain the original size of the images that vary somewhat.  I tried to use the option of the Board-contact, but he seems to want to resize my images which unfortunately is of no use to me.  I tried to cut and paste on a new page, but I don't think that it is now the original size.

  Alternative applications sometimes can provide quick and easy results.

  It might be interesting to download the demo version of Photoline: it includes a simple Board-contact option that allows for images to be included without loss of resolution, i.e. the original is left intact and the proportions remain unchanged. Since Photoline also supports documents several pages, all the thumbnails are collected into rows and columns, the user can control and the end result can be exported as PDF.

  -Download the trial of pl32.com

  -Open Photoline, then open the browser (CTRL/CMD (B)

  -Navigate to your folder with the images you want to combine for printing.

  -right mouse click in the thumbnail view, and then select "Create image Catalog.

  -Select the page by Page size

  -under 'Size' define the number of rows and columns (there are here a translation error: "Spalten (COL) / rows (lines)".)

  -Uncheck "scale photos physically." This ensures that the original images are intact and incorporated in full resolution.

  And then click OK.

  Some of the other testing devices until you get a satisfactory result. Then export it to PDF.

• Not scanned image the same size as the original

  Scanned images of a doc of legal size seem to be reproduced on images of legal size. When printing, the print space is 60% or the printed page, while the original doc was so full page. Any thoughts on how to fix this?

  The default action is to just scan the document in without letting you look at your scan settings. I would say "the Interface of the Native Scanner see the" setting under "Custom Scan".  File > create a PDF from a Scanner > custom scan

  Click on the radio button to select "native interface of the scanner Show", then OK to confirm.

  When you click Scan in custom scan, you can then preview, set the size and then analyze using your own scanner software.

  

• Import images with an original size

  I made animations (frame by frame, it then it's tedious) that I put in my live action films. I use flash so that I don't get any lag in the photos is not close enough. It is wrong... every time I import images into flash, it reduces their size to fit in the middle... Please tell me how you can import the photos with their original size in tact.

  NVM, I tested a few things and thought of it

• If I use iCloud photo library to share photos on my Mac, make the stay of the files full original size on my Mac or they stored in the cloud?

  If I use iCloud photo library to share photos on my Mac, make the stay of the files full original size on my Mac or they stored in the cloud?

  Thank you!

  The photos full size will always go to the cloud. They also remain on (or download) your Mac depends on if 'Download this Mac originals' or 'Optimize Mac storage' is ticked in Photos > Preferences > iCloud. If it is enabled, it also depends on how much storage is available on your Mac.

• Original location in a corrected image (using calibration data)

  Hello

  I use the tool of vision to correct the distortion in images.
  I do not use the model grid point let the software generate the calibration sheet, but rather use a set of points (which I can define precisely in the distorted image) and provide their respective coordinates 'real world '. I can then apply this correction to other images.
  So far so good.
  Now I want to superimpose two sets of images, which are distorted differently (for example, they represent the same object, but were photographed in slightly different conditions). I have
  good adjustable using the method above and the other separately, with its own separate correction, but I'm stuck there.
  Each calibration/correction is characterized by a scale factor and a coordinate of origin. I need both to be able to superimpose the two sets of images.
  I chose non-linear calibrations that preserves the area and I thought of a way to recover the scale factor by calculating the areas of all patterns square in my series of (as calculated in the original image) calibration points, taking the average, then the square root of the area average: This gives the spacing between the points equidistant in the corrected image.
  However, I can't figure out how to get the original location in the corrected image. One of my points of calibration is associated with the position (0, 0) in the real world. However, it is neither its position (in pixel unit) in the original image or the corrected image. I need the latter. How can I get it simply (I can think of sophisticated ways to get it, but I suspect that it might be a trivial).

  Thanks in advance for your answer.
  Sincerely,
  X.

  Hello

  I guess you are referring to "Convert to/from the real world" screws. As far as I understand well as do these screws, they refer only to two "spaces". One is the distorted image of origin (with coordinates in pixels) and the other is the ideal 'real world' space, where this image was generated, with coordinates expressed in all the units you choose. I am concerned about a 'third space', the corrected image generated by the Vi "IMAQ Image of calibrated" correct, and I want to know the point, which, in the real world, has the coordinates (0, 0), where in this picture (if possible with coordinates in fractional pixels, coordinated whole pixels not only).

  I haven't posted my response to Nate, but basically we agreed that what I wanted was not available yet. I have work to do to get this information (as I suspected). It's a shame, because the Vi above obviously knows how to calculate what I'm looking for, because it maps the pixel (or fractional pixel coordinates) where the origin is located in the real world, on an another coordinate (fractional) pixel in the corrected image.

  This may be available in a future release, but for now, some work is needed here...

  X.

• the window on my computer does not return to its original size and I can't use the max and min and exit button

  my window is too far to the right and ive tried to get to the original size and it will until a certain point to the left. This leaves me unable to use the max and min and exit tabs

  Hello

  1. What is the brand and model of the computer?

  2. is it a laptop or a desktop computer?

  3. the problem occurs after leaving the game or program?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  If this happens when you leave a game, I suggest you to follow the steps mentioned in the link and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 3:

  Step 1:

  I also suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You can also check if the problem persists in a clean boot state.

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• What is the size of the image used to render the list (for list image rendering)?

  Hello!

  Can u please tell me, what is the size of the image used to represent the listItem. I used the size 40 x 40 for listitems, but the listitem be merged with another. Image will not be rendered with the size (actual size).

  PLS, suggest me-

  ListIField generally uses a height up to the police on the storm no devices. The storm, it has a fixed size greater than the height of the font.

  If you want to draw a picture of 40 x 40, you need minimum height of 40px. Call setRowHeight (40) in the constructor of the listfield.

• What size the image of origin or to 100% width is admissible?

  What size the image of origin or to 100% width is admissible?

  Please check these documents for more details:

  https://helpx.Adobe.com/Muse/how-to/muse-optimize-graphics-assets.html

  https://helpx.Adobe.com/Muse/how-to/muse-size-resolution-graphics.html

  Thank you

  Sanjit

• Is is possible to have the images as thumbnails and make sure you can click on it to enlarge and then click on them again to return to the original size? In an interactive pdf?

  I'm designing an interactive catalog in a pdf document. Is it possible to have the images as a thumbnail then click to enlarge the image and then click again to bring them back to the original size?

  Thank you in advance!

  Stephanie

  Select the small image and amounted to a button, place the magnified image and which to a button. Change the button to show/hide the big button do. The large button is hidden until the button is clicked, and then to hide when you click New.

  Alternatively, you can have another InDesign document with images in full size, add text anchors to the images full size. Convert the small images for the buttons (or add invisible buttons above them) and tell the buttons to go to anchor text in the other document. Combine the two documents in a book, export to interactive PDF format.

• Determine the best image to overlay size to use

  Hi people

  So I'm working with Premiere Pro CS6 make a video montage of a Minister of my friends. Over pieces of the video, I was just overlap citations and whatnot. I would like to achieve consistency in always making sure that they are included on the same location on the screen. So I thought that a simple way to do it would be to determine the pixel size of the sequence. And the report of properties folder that my sequence is 1440 x 1080. I thought I could just create and manipulate images of this exact size and drop them to the exact location.

  The problem is that when I create an image of this size and drop it in PP, right monitor shows the image with areas of pillarboxed video on each side of it. The image certainly seems to be on-site with the altitude, but the width is off and I don't know why?

  So what is the explanation here? Certainly it seems that properties of the sequence are at odds with what this area right monitor in PP.

  

  Thank you... Rick

  You can specify the PAIR of titles that you create:

  

  .

  Basically, HD anamorphic uses rectangular pixels

  in order to crush the 16: 9 image in a setting of 4 x 3.

  First use-squishes' back pixels in 16 x 9.

  If your film the layer source is 1440 x 1080 (1.333).

  you are right in a sequence of 1440 x 1080 (1.333)...

  you just need to create the corresponding aspect / securities.

  If you use another application to create your .png images

  I'd be inclined to 1920 x 1080 (1.0).

  This will suit your anamorphic sequence regardless of the BY.