Images and thumbnails white

Similar Questions

• New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I have

  New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I get a message that says no. Photos import active.

  This means that you have previously imported these pictures/videos into Lightroom, and you must not (and are not allowed to) import them again.

  Go to your library Module (not the import dialog box) and find the photos, then you can make use of them in any way you want in Lightroom.

• When I opened the PS from LR to edit an image, the thumbnail appears in the sidebar, but the area of the image is white, PS CC 2014!

  Hello

  I just started a subscription for the Pack of photographers, when I opened the PS from LR to edit an image, the thumbnail appears in the sidebar, but the area of the image is white, I'm sure this is a rookie mistake stupid, but I can't for the life of me see what I did wrong.

  With 256 VRAM, you won't be 3D but with the right drivers, you should be able to use the features of PS that don't require 512VRAM and GPU support.  You should be able to see and edit images.

• can I remove the Green ticks of my thumbnails of image and how do I

  can I remove the Green ticks of my thumbnails of image and how do I

  Hello

  If you have Norton, it may be that the file has been correctly saved - please see:

  https://support.norton.com/sp/en/us/norton-core/current/solutions/v19829044_N360_Business_CC_6_en_us?entsrc=direct_pubweb&filter=search-all&q=backup+green .

  It seems to contain instructions on disabling the overlays of icons, but as I don't have Norton, I can't confirm that for you.

  There may be other products that change the appearance of the icons.

• Thumbnail images do not match with images and file names

  I got a surprise this morning! Thumbnails of my photos do not match with the real images and file names. File names correctly matching the real images. Pls help how to fix. Could it be caused by a virus?

  I got a surprise this morning! Thumbnails of my photos do not match with the real images and file names. File names correctly matching the real images. Pls help how to fix. Could it be caused by a virus?

  ==========================================
  What version of the program / are you use ot see the pictures?

• What is the difference between reactive and thumbnail image?

  It may seem like a stupid question, but what is the difference between a tailored boot image and a thumbnail "bootstrap"?

  Mary + 8 wrote:

  So, there is no intelligent property to one thumbnail that is other than a gray border? It kind of implies that you can roll to get a larger version, but of course, this isn't the case.

  I think I'll stick to the image of reagent that has all the variety of forms, including a miniature option.

  Not really, its just style the element to look like what you would expect a "miniature" to look like.

  promoting the IMG is applied to any image you want to be sensitive, although by my philosophy of images "bootstrap" should have been reactive default as seems its supposed to be 'most popular worlds sensitive framework' - they got it wrong too, as well as many other things in their environment.

• White spaces between and vertical shifting of images (and text) as a preview of the browser

  I built my site in Muse, but when I preview the, there are white spaces of different sizes that appear between images and text. In addition, an entire section of the Web site has moved down through an entire page. Here are a few screenshots as I can manage them. Unfortunately it is not yet hosted, so I can't post a link.

  Just a note: I'm build this page of my site as a portfolio to side scrolling. At the beginning of each "page", I added an anchor point, and I've added a 'back to the start arrow' so that the elements of different menu on the far left of the page (at the beginning) a link to their respective 'page' along the portfolio of horizontal scrolling. Similarly, the "back to the start arrow" menu link.  I don't know if this is part of the question, but it seems that it shouldn't be, because I got that simply making the page extremely broad and not very large.

  Here are a few screenshots.

  Inside, Muse:

  

  Leave the browser preview:

  

  Inside the Muse:

  

  Leave the browser preview:

  (Here are two screenshots only because they were separated by white space so that I could not them on the screen at the same time.)

  

  

  A more. This one shifted downwards, rather than on the side. Note that I did so that the image on the bottom was not attached to a low sticky footer or anything.

  Inside, Muse:

  

  Leave the browser preview:

  

  Thank you!

  Well well, the standard answer (and I should perhaps store them somewhere as a copy & paste NOTE): you must use groups and other methods of structuring as widgets. Your items may not stick together because they have no container parent to hold them together as in reverse, they can overlap with because they have no logic telling them everything that is left, right, above and below. Muse is not a page layout program and you not post a PDF file where everything is nailed in place. dumping everything on the page without which concerns the way in which it will interact in your browser never gives the result you expect.

  Mylenium

• In photoshop, I imported an image and put on a transparent background.  It's a very simple picture, like a drawing done in pencil.  How can I change from black to white?  Hope I don't confuse anyone, I don't always word of things well lol.

  In photoshop, I imported an image and put it on transparent background.  It's a very simple picture, like a drawing done in pencil.  How can I change the color from black to white?  I hope that my question is not a source of confusion, that I didn't Word always good things.

  Invert

  Shortcut Ctrl + I or CMD + I

• Is is possible to have the images as thumbnails and make sure you can click on it to enlarge and then click on them again to return to the original size? In an interactive pdf?

  I'm designing an interactive catalog in a pdf document. Is it possible to have the images as a thumbnail then click to enlarge the image and then click again to bring them back to the original size?

  Thank you in advance!

  Stephanie

  Select the small image and amounted to a button, place the magnified image and which to a button. Change the button to show/hide the big button do. The large button is hidden until the button is clicked, and then to hide when you click New.

  Alternatively, you can have another InDesign document with images in full size, add text anchors to the images full size. Convert the small images for the buttons (or add invisible buttons above them) and tell the buttons to go to anchor text in the other document. Combine the two documents in a book, export to interactive PDF format.

• My gradient does not work.  He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can it go back to black and

  He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can get it back to black and white and it will not change... it will not change if I click on any of them.  I think it might be a bug?  Any ideas will be appreciated.  I tried to reset them as well.  Thank you!!

  Check your Options bar.  You have the opacity set to 10%.  Easy to do.  Just hit the 1 key while the gradient tool is selected, and it's done. By pressing the 0 key will take you back to 100%

• Thumbnail images, more large images and text PROBLEM

  Unclear title, with a problem difficult.

  What I am wanting to do is, when I click on a thumbnail image, I want to have the content of the DIV to display the image and the thumbnail information you just clicked the right to change accordingly. I use Dreamweaver CS5 on MAC:

  -J' have a page divided into 2 vertical columns. On the left, I have 6 thumbnails in their individual DIVs, all wrapped together in another DIV container

  -on the right side of the page, I assigned a large DIV to display a large image with a description below what the project was etc...

  I know that you can attach a behavior to the thumbnail to change the big picture on the right, but I have a short paragraph of the text below the big picture too, and I don't particularly want to make the image and text a huge image. I want to keep the text, text.

  How can I do? Is it a simple thing? or y at - there a lot of coding to do this with JQuery, Javascript or something? Is there something to do with the data record sets involved?

  Is it possible to do that when you click on the thumbnail it can charge the relevant image and text in the div on the right?

  Sorry if it did not clearly explain, do not know how do it, so don't know if I'm describing correctly.

  As always, all the help and advice very welcome.

  In the right column, you would-

  Legend legend legend

  Legend legend legend

  ...

  The CSS would be-

  {of signs

  display: none;

  / * Add other styles as needed for the caption * /.

  }

  The thumbnails would each of the following behaviors:

  * onclick set the desired right column div to "display: block" using behavior ChangeProperty of DW.

  * also onclick set all the other div of the right column on ' display: no "DW ChangeProperty behavior.

  Be aware that how to apply this behavior for inches is one) first to wrap every inch in an anchor null () and then apply the behavior to the anchoring of the packaging not to the image.  Alternatively, you can apply the behavior to the image and then using the behaviors panel, change the behavior of "onClick" event to " onClick.

• All images is completely white?

  I have images captured on the screen using Adobe Captivate and I'm putting the clips in Adobe Premiere. Videos work very well outside of first and when they are imported their thumbnails are displayed correctly, BUT when I play within the first there's nothing but white (gray, if I put them on the timeline) as if the images do not exist!

  I googled this and tried a few fixes (update my graphic drivers, convert MP4 to MPEG images and change playback settings of 'Hardware' to 'Software'), but nothing has worked.

  Any help would be greatly appreciated!

  sp_gross

  Thanks for the reply with troubleshooting information.

  If you are sure that Adobe Captivate records with a constant rate (as evidenced by a frame rate in MediaInfo reading), we can exclude this factor. Premiere Elements does not fare well with a video recorded with a variable rate on the duration of the clip. That the rate of 12 frames per second image in itself is worrying. But other things to focus on the first.

  Do you have the latest version of QuickTime installed on your computer as well as first items 10 and run programs as an administrator (from account user with administrative privileges)? What is the card of video/graphics card that runs your computer 64-bit of Windows 10? If NVIDIA GeForce, judgment, we need to talk.   ATR Premiere Elements troubleshooting: PE10: NVIDIA video card Driver Roll Back

  At present it seems that you have a file with a .mp4 file extension and a 12 frames per second 1920 x 1080 image.

  Later.

  Please consider and provide more information. Thank you.

  RTA

• blurring of the images and keep the average luminance

  I am cropping Visual attention - I work with black and white geometric patterns (think of checkerboards, swirls, etc.) and I want to take my images 'standards' and climb in different ways so that they look at novel but contain pixels of same exact like the original, so to keep their original average luminance.  I know how to use filters "distort" but I don't know if these maintain overall luminance or not... what I would ideally like to do is just highlight some parts of the image and move them, creating a mosaic of the original image.  Any suggestions?

  Thank you.

  I can't think a soloution a single click, but I tried the research of various effects of mosaic.  To do this manually you would need a repeating pattern like a hexigon.  You can use the form to eradicate the fields one at a time and copy into a new layer and then do a transposition of the word puzzle type.  Set your palette of layers in the large thumbnails so you can see what "tile" to pick up and move, or better yet, select the move tool and check "Auto Select" to the far left of the options bar.  I hope someone will come up with a simple solution for you.

• Apply a mask or something to an image with a white backgroung.

  Hello

  This is my second post today.

  In this post, I'm trying to understand how to apply a background texture or image to another image.

  The foreground image is complex to choose all the pixels using the tools of scrolling text that I want to consider as a backdrop.

  But it is above all one color, white.

  Consider an image that is ink sketch by using many colors but a sketch of the pen, it has much, much background paper.

  Lets say, it is scanned into the computer. Immediately the white background is a little hundreds of almost white colors.

  All I want to do is create a rectangle style paper and place it under the ink, so replace the paper with my own book.

  I tried to place the rectangle on top of the image and using 'overlay' Fuzzy light' and all filters. Some are close, but they seem to everyone either lose the quality of the paper or affect colors ares too.

  I also tried to export as gif with transparency indexed, but I want to mix alpha aliasing and 32-bit color.

  What I want, it's as if I used the magic wand and clicked on a white area, and instead of just the current selected graduation section, I want that all ares to choose so similar color.

  Thank you

  Jerry

  For the card to play, why not use the magic wand?

  1. Select the magic wand, tolerance of 19, hard edge, then click once on any white space, particulaly a 'white mass' area, so you get a lot with a single click.

  2. go in Select > similar. This will get about 99% of all white.

  3. go in Select > Inverse.

  4. the card image object to play active in the layers panel, click the Add layer mask icon at the bottom of the layers panel. This will hide out / knock out all white. However, Edge fidelity is not large: two steps will correct this.

  5. Select the thumbnail of the layer mask, then go filter. Blur > Gaussian blur (adjustable between 1 - 2). This will smooth the edges.

  6. always with the assets of the layer mask thumbnail, go filter > adjust color > levels. First, push the gray levels (one in middle) slider all the way to the right (towards the white slider). Then slowly drag black to the right until you see the best result in the edge.

  7. Add a canvas of color other than white to see how affective is the detachable part.

  My results in a few minutes see attached.

  Original - up and down, the process described above. Working alone little etra would zoom in and manually hide (black brush) the remaining stray white areas.

• 3 related issues: slow movement; the photos are all from the first image; and no sound from the soundtrack to the DVD downloaded.

  I put a DVD in my computer. It plays fine in Windows Media Player. When I transfer to Windows Movie Maker Live, three things happen: 1) the thumbnails are all the same - the first image. (2) the movement is slow. I tried it accelerates, but it is simply not the movement in real time - either too slow or too fast. (3) the soundtrack plays for a fraction of a second.

  What is the problem and how to fix it?

  I converted DVD to WMV format. This fixes the movement of the image and I can hear the music (not quite synchronized), however the thumbnails are still just the first image. In addition, every single feature that I blow (editing, effects, forwards, etc.) the picture freezes and yet the soundtrack plays again.

  ===================================
  It is normal that video to be the first image thumbs.

  Since it was a DVD... I guess it's a big project
  and the gel could be due to a lack of system resources.
  If you wait it can dissipate.

  Some video converters are better than others... Freemake
  maybe worth a try.

  It is also possible that your video driver may need an update.

  Verify that the video driver is problematic is to
  reduce the graphics hardware acceleration:

  Windows 7 - reduce graphics acceleration
  (see following article)

  More low hardware acceleration
  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=15391
  (Windows 7 / Vista / XP / 98 / ME / 2000)

  Good luck...