IMessage: "Message cannot be send.

Similar Questions

• SMS messages will not send watch with active iMessage

  So for three months, I had a problem where my Apple Watch will not send a SMS (iPhone users messages) messages when iMessage is enabled on my iPhone 6.

  Has anyone else encountered this problem? I had my watch replaced by Apple and still encountered the problem. My only work around is to disable iMessage in settings, but I'm not happy with this.

  I have paired and unpaired my Apple Watch repeatedly. I have even associated with a 6s iPhone and did NOT have this problem. Anyone else have any suggestions?

  Hello

  Check that you have enabled the following parameter:

  -On your iPhone, go to: settings > Messages > turn on send as SMS (if it is already on, it may help to toggle this setting and the iMessage off and on again).

  Otherwise, you will find that it is useful to upgrade your iPhone and Apple Watch to the latest version of the software:

  - Update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  - Update the software on your Apple Watch - Apple Support

• the last 2 days I can't send / receive email. error message cannot be found to verify it, error #ox800cccod

  For the last 2 days I cannot either send or received by e-mail.   Error message account cannot be found.  Code #ox800cccod. That's happened?  How to fix?

  • What email program are you using?
  • Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.

• When I send a document to someone I get the message "Cannot send a document only to you to sign." I'm not send it to me.

  When I send a document to someone I get the message "Cannot send a document only to you to sign." I'm not send it to me.

  Hi Jerryg,

  On the Send tab, you can click Show CC and see if your e-mail address is displayed or not. If so, then delete it and then send the document. Also, I would like to know which browser you are currently using.

  Kind regards

  -Usman

• After you set up the account on iPhone6 (iOS 9.1) all messages appeared: No sender; No subject; 31/12/69 the Assembly cannot be deleted. Messages can be sent ok.

  After setting up my account on iPhone6 (iOS 9.1) all messages appeared: No sender; No subject; 12/31/69. Editing does not have any message to delete. Messages can be sent ok. I sent a message from my office, on the phone, and while it was received, it was posted exactly as above. My e-mail account provider of Cableone and says that the problem is in the phone, and not with their system. Is there anything short of deleting the account and re-enter I can do?

  Do a forced restart: press and hold the home button and sleep, wait for the Apple logo, release the buttons.

• Messages are not send to non-Apple users, is no longer syncing with iPhone

  I can't use Messages to send messages to non-Apple users ("your message cannot be sent.'), or it syncs with my iPhone. I have all the settings in place, it has just stopped working.

  Hey Tux Kapono,

  I understand that you have updated to macOS Sierra, and now you can not send SMS messages. I know it's nice to be able to have continuity in your messages on devices, so I'm happy to help you.

  There are a few settings that should be checked to make sure that everything is correctly configured for this feature. This article has more information on the subject:

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support
  

  Set up SMS and MMS messaging

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

  Thank you for using communities Support from Apple. See you soon!

• iMessage message unread repeatedly brands

  When playback immediately an iMessage iMessage contact one marks the message as unread even after that you answered.

  Currently running the latest IOS - 9.2.1 on an iPhone5, have restarted the phone and removed the contact but did not address the issue.

  Has anyone another considering somewhere else or have any ideas?

  Thank you.

  Hello phillip162,

  Thank you for using communities of Apple Support.

  I understand that a particular message thread is not mark messages as read.  Given the previous troubleshooting you have already done, I then suggest to delete the conversation which is to have the question and then start a new conversation.

  Delete the conversation * who has the problem and start a new conversation:

  1. Open your Messages and view your list of conversations.
  2. Straight shot left on the conversation you want to delete. Then, remove faucet.
  3. Open your Messages, type and enter the phone number or email address of your contact or contacts.
  4. Write a new message and press send.

  * When you delete a conversation, you will not be able to recover. If you want to save parts of conversations or their attachments, you can take screenshots. You can also tap a bubble attachment or message, and then tap more > save.

  If you can't send or receive messages on your iPhone, iPad or iPod touch

  See you soon.

• I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?

  I get a message "Cannot perform this operation because the default mail client is not properly installed".  What should I do?

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

  In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook

  Note: Office 2010 Home and Student Edition is not include Outlook.

• Cannot receive/send on Windows Vista Mail

  Cannot receive/send on Windows Vista Mail... I get a message that says...

  Some errors occurred during the processing of this task... see below for a list of errors...

  There are no errors listed below for me to check... How can I solve this?... Can I send when I open windows mail, but not when I click the send/receive button. Thank you

  This symptom may be caused by the interference of an antivirus program. What antivirus do you use? Some of them are causing problems with Windows Mail over time. At a minimum, email, scanning in the antivirus must be turned off, although maybe it's not enough to eliminate all the bad effects. In the worst case scenario, your antivirus program may be uninstalled/reinstalled or replaced.

   

  E-mail analysis in any antivirus must be disabled, for the reasons explained here:

  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

   

  As an alternative to the replacement of your antivirus, consider upgrading to Windows Live Mail, because it is less prone to suffering from the ill effects of too intrusive antivirus programs:

  http://download.live.com/wlmail  

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "runner 50 Guy" wrote in the new message: * e-mail address is removed from the privacy... *

  Cannot receive/send on Windows Vista Mail... I get a message that says...

  Some errors occurred during the processing of this task... see below for a list of errors...

  There are no errors listed below for me to check... How can I solve this?... Can I send when I open windows mail, but not when I click the send/receive button. Thank you

  Gary van, MVP (Mail)

• Firefox update has just finished and now I can not restart Firefox. Get the error message "Cannot find the duration of mozilla"

  Automatic update of Firefox has just finished. After the update update, tried restarting firefox and I received the error message "cannot find mozilla runtime" I tried to restart the computer, but it did not help. How can I fix this so I can restart firefox?

  Hi rjadja, please see if it does not work properly after reinstalling firefox with the full installer instead which can be obtained from https://www.mozilla.org/firefox/all/

• In some ways, enter no sign has been added next to contact, now all messages previously received messages have disappeared and no new messages from this sender will appear.

  I received messages from this sender end and then all of a sudden for some reason there was a do not enter sign next to its name. I knew not how or why it got there, some button hit or mouse and I did not know how to remove it so I just left. Since then, thunderbird has been reopened and all the messages I had received disappeared and no new messages from this sender appear even though I know she sent them to me. I checked the filters and I don't put so it isn't that. I can't figure out how him do not enter sign next to the contact, but I'm sure that's the reason for my problems, and I don't know how to fix it. Thank you

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got an error message cannot open output file. Can you help me please?

  I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.

  The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?

• Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I got this message several times, how to fix?

  Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I can't chat because the phone is locked and I can not access my serial number. I got this message several times, how to fix?

  Have you already checked this discussion about this?

  The iPhone cannot be synced. An unknown error occurred (-50)

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation