iMovie dissolve or transition that does not change the length of the clip or move clips
Hello
So, I worked on an iMovie project today. I brought many different video clips. Each clip has its own attached audio narrative. Right now I have almost finished project - I just right things (audio aligned with video) - but when I try to add a transition between two audio clips faces - get too close, and on the other.
In my opinion, audio clips are locked to the video clips - I used the microphone for voice icon on and I can see a vertical green bar at the beginning of an audio clip, reaching up for the video clip that is intended for the audio.
My first thoughts were this: can I freeze the frame - use the frozen frame to add a second or two on the length of the clip - to take the necessary time for the transition and (hopefully) prevent the audio to come too close. No luck. Adding a still image not (as far as I could tell) increase the length of the video clip as a cushion to allow passage to complete before the next audio clip starts playing.
I am tempted to add a still image between the two clips - this will add a buffer between each clip without disturbing the relative position of the audio for the video clip, it is attached. Is it possible to export an image, and then insert the exported image between the two clips?
Any ideas?
David
Or, there may be a convenient way to move all the clips on the right to a right moment. Who would do the trick-, but the only way I know how to do that is to insert a picture. I guess I could make a black picture and insert it between the clips.
Tags: iLife
Similar Questions
-
Okay, so my problems are...
(1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the relevant articles, I cleared my cookies and cache and downloaded the theme (A Blue Fox), installed and turned on, and it worked perfectly fine! I tried to upload another (Pink Fox), one installed and activated, but it did not work. Instead, he returned to the default theme. So I tried to clear my cache and cookies again and repeat the process, but now after downloading, it says "error".... "I don't know if it says"Error Downloading"or"installation error ". Now, I tried to download it again after turning off my computer and turn it back on again, but (today), the two has not applied to my browser. They both had the same look... by default! Please tell me what is the problem!
(2) in my "Add-ons Manager" page, on the appearance tab, there is no button disable for my modules. Only the "delete" button is present.Please help me!
NOTE: I already tried to reset Firefox, but it does not solve my problem.
You do not disable a theme, but you choose another theme if you want to change the theme.
Remove button is for when you no longer want this theme.You must select a theme and then close and restart Firefox, if you want to use this theme.
If this does not work, then you may have a problem with the prefs or something interferes.
If you don't keep changes after a reboot then see:
-
Satellite Pro P300 - Fn + f5 combination does not change the monitor
On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.
If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)
Thank you, best regards,.
Davy
Hello
In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.
In my opinion, you should clean the registry first.
Use CCleaner. It s free and cleans up the registry.
In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
Finally, install the Toshiba drivers from the Toshiba page
More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for... -
Insert a new CD does not change the last torn CD
WMP 11 XP SP3 does not change the info of CD in the RIP, a new CD of screening. WMP 11 found no new updates when updates has been requested. If I close WMP 11 and reopen WMP11 new info of the CD are correct. It must be a problem of buffer information.
If you start XP in clean boot mode, the same problem occurs there?
In addition, please check if the problem occurs on other users accounts, by creating a new user account in the Control Panel, by logging into that account and trying it.
Tim Baets
http://www.BM-productions.TK -
DMZ-Link bandwidth does not change the routing table countin traffic
Hey guys
I'm INE laboratories dong and shoved a weird one that delivers.
I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.
Here is my configuration:
Rack1R6 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 54.1.1.254 distance-54
neighbor 54.1.1.254 dmzlink-bw
neighbour 155.1.67.7 distance-300
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
No Auto-resume
Rack1R6 (config) #.
Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 54.1.1.254 0 54 I
* > 28.119.17.0/24 54.1.1.254 0 54 I
* > 112.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 113.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 114.0.0.0 54.1.1.254 0 0 54 I
* > 115.0.0.0 54.1.1.254 0 0 54 I
* > 116.0.0.0 54.1.1.254 0 0 54 I
* > 117.0.0.0 54.1.1.254 0 0 54 I
* > 118.0.0.0 54.1.1.254 0 0 54 I
* > 119.0.0.0 54.1.1.254 0 0 54 I
r > 155.1.0.0 0.0.0.0 32768 I
Rack1R6 (config) #do sh ip bgp
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i28.119.17.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i114.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i115.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i116.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i117.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i118.0.0.0 204.12.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
*> 54.1.1.254 0 0 54 i
* i119.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
r i155.1.0.0 155.1.146.4 0 100 0 I
r> 0.0.0.0 32768 i
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* > i205.90.31.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i220.20.3.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i222.22.2.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
Rack1R6 (config) #.
# now R4 configuration
Rack1R4 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 155.1.45.5 distance-200
155.1.45.5 route-neighbour card GAME-54 on
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
neighbour 204.12.1.254 distance-54
neighbor 204.12.1.254 dmzlink-bw
No Auto-resume
Rack1R4 (config) #.
Rack1R4 (config) #do sh ip bgp Synt.
Local router BGP 150.1.4.4 identifier UNDER number 100
BGP table version is 18, table 18 main routing version
15 entries for network using 1980 bytes of memory
18 entries for path using 936 bytes of memory
9/7 BGP path/bestpath attribute entered using 1512 bytes of memory
3 entries for BGP AS-path ACCESS using 72 bytes of memory
1 entries PMO community, using 24 bytes of memory
0 cache entries of BGP route-map with 0 bytes of memory
0 cache entries of filter-list BGP using 0 bytes of memory
Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory
BGP using 4620 total number of bytes of memory
Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3
155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3
204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10
Rack1R4 (config) #do sh ip bgp
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* i205.90.31.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i220.20.3.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i222.22.2.0 155.1.13.3 0 100 0 200 254?
Network Next Hop path metrics LocPrf weight
*> 155.1.45.5 0 200 254 ?
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
* > 205.90.31.0 155.1.45.5 0 200 254?
* > 220.20.3.0 155.1.45.5 0 200 254?
* > 222.22.2.0 155.1.45.5 0 200 254?
Total number of prefixes 14
Rack1R4 (config) #.
# and where is the real problem, R1
Rack1R1(config-Router) #do sh ip bgp
Version of BGP table is 15, local router ID is 150.1.1.1
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i28.119.17.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i114.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i115.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i116.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i117.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i118.0.0.0 54.1.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
* > I 204.12.1.254 0 100 0 54 I
* i119.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i155.1.0.0 155.1.146.6 0 100 0 I
* > I 155.1.146.4 0 100 0 I
* > 205.90.31.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 220.20.3.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 222.22.2.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0
112.0.0.0/8, version 4 BGP routing table entry
Paths: (2 available, best #2, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Announced for the update-groups:
1 2
54 50 60, (from a customer-RR)
54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)
Origin, IGP, 0, 100, valid, internal multipath localpref metric.
DMZ-Link Bw 250 KB
54 50 60, (from a customer-RR)
204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)
Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best
DMZ-Link Bw 12500 KB
Rack1R1(config-Router) #do sh ip route 112.0.0.0
Routing for 112.0.0.0/8 entry
Known through 'bgp 100', 200, 0 distance metric
54, internal type tag
Last update of 204.12.1.254 ago 00:15:30
Routing descriptor blocks:
204.12.1.254, 155.1.146.4, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
* 54.1.1.254, 155.1.146.6, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
Rack1R1 (config - Router) #.
as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...
can you please help me if I makeover anything in my setup?
Hello
Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.
-
getPreferredHeight does not change the height of a LabelField.
Hello
I add LabelFields at a screen. I replaced getPreferredWidth and the LabelField getPreferredHeight. GetPreferredHeight however does not change the height of LabelField.
getPreferredWidth seems to work very well.
I do not use the default vertical Manager that comes with the screen.
Ideas/pointers in troubleshooting this would be greatly appreciated.
-MO.
Hello
to change dimensions on a field, you must override the method of layout.
protected final void layout(final int width, final int height) { int yourHeight = super.getFont() * 2; super.setExtent(width, yourHeight); }
If you want the label is centered vertically, you must override the paint method.
-
After the upgrade to 6, security server does not change the listening Port
Came across a weird situation where after upgrading a server security 6.1.0 - 2509221, it does not change the listening SSL port during the upgrade, it was not on the standard SSL port.
It was initially configured to listen on 444 before the upgrade, after the upgrade, I tried to go back to 443 and a netstat-ban shows that it is listening on port 444.
I double checked the config.properties file and there is no entry for serverPort, and configuration shows 443 in the admin View handler.
-Re-apply the configuration via the web page does no change, always tuned to 444.
-Don't restart the service of security server no change, still plays on 444.
-Restart of the server, no change, still plays on 444.
-Statically placed serverPort = 443 in the config.properties, always tuned to 444.
All ports are verified open, 443, 444 and so I think I could have hit a bug. Someone else has security servers that listen on non-standard ports SSL?
A complete reinstallation of the Security server is provided, changing the port to listen 443, shouldn't have to do that well.
You checked config.properties, but did you check in locked.properties for the port setting see if it's been moved there before and during the upgrade? Locked.Properties replaces all the configuration settings.
-
Importing APEX app with PL/SQL does not change the id as requested app
Oracle DB XE 11 GR 1 material
APEX 4.2.2
RHEL 6.3
------------------
The following code segment any an APEX application which has been exported successfully. However, even when given a 'new' id of the application, the 'old' within the export application id is still used.
What could be wrong? In other words, how can I make sure that the 'new' id of the application is used and it overrides the 'old' id of the application that comes with the APEX app export file?
declare...
wwv_flow_api.set_security_group_id (p_security_group_id = > v_secgrp_id);
apex_application_install.set_application_id (t_new_app); # does not change the new app app ID id
....
exception
while others
.....
end;
/@APEX_export.sql;
commit;
Thank you.
It turns out that the code above (6) works very well. My development environment has a problem with the workspace is not found. Tried the code in a test environment and it worked.
Thank you.
-
I have a problem with the error 'LANG_LIST a certain locale that does not match the regional settings of the serial number' recurring.
I'm trying to install Acrobat XI Std silently by SCCM.
I used the Adobe Customization Wizard to create an STD which include the serial number of the volume that we have with our license purchases. Note that I am in Australia. I use the command line in SCCM for installation as "msiexec /i"AcroStan.msi"TRANSFORMS = /'D & B_AcroStd.mst' SB ' fails silently. If I install on a local computer using an admin command prompt and replacing /qb in the end, I get the above error.
I have a few things to try to solve, after searching the forums adobe and other forums for the solution. The mst is only trying to install U.S. English & I even went up to use the Editor directly in the Customization Wizard and change some values in the property table for this problem. In the property table, I can confirm that LANG_SEL_DEFAULT = FRA, REGIONAL_LIST = FRA, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for the ym serial number?
Linda
I contacted customer service and a live chat session. It turns out that the problem is to use a key volume license, you must download the installer from portal licenses on the adobe Web site. Once I downloaded from there, extract the msi file and used the same transformation, the installation worked.
In other words, other downloads probably won't work for the silent installation of volume but works by Manuel installs. You will need to download it from https://licensing2.adobe.com/
-
Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?
General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).
The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.
If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).
-
Access policy does not change the status of resource
I have a set access policy to assign a role and a resource to anyone in a specific group. The policy work very well for those who have never had the resource before. For people who were in a disabled state resource - access policy is to add the role, but it does not change the State of the resource from disabled to enabled (or put into service).
How can I do so it adds not only the role, but he changes the State of the handicapped resource? Thanks in advance.Simple!
-Create an adapter of the entity during the prior insertion of the Members Group.Group of the user who will be called on the user being part of the group. Add custom java code that will check the resource assigned to this user and confirm if its there and in a disabled state. If its disabled and then turn it back on, otherwise just hang on and do nothing.
Thank you
Sunny
-
I recently started getting this strange message, usually when a Pages document is closed:
«The document _ is on a volume that does not support the permanent version storage.» You can access older versions of this document once you close. »
All my research (apple.com and on the internet) have not enabled all the information on this message.
Hi Larry,
The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.
OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.
Kind regards
Barry
-
I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.
But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!
(And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)
Hello
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- In Firefox 29,0 and above, click on the menu button
click Help
then select restart with disabled modules.
- In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- In Firefox 29,0 and above, click on the menu button
-
Why an amplification of the RAM does not change the index performnance of windows vista?
Why an amplification of the RAM does not change the index performnance of windows Vista?
Hello
I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
Usually the 32 bit OS is capable to manage and send only 3.2 GB.
The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
But this is only my personal hypothesis.Welcome them
-
Original title: A bootable Windows 7 media
I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.
Thank you
Matt Armshaw
Windows 7 or Windows 10 come preinstalled?
If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:
-Disable the secure boot UEFI
-Disable the quick start
-L' install created media can be corrupted.
How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first
I suggest that you try to create another bootable copy.
Maybe you are looking for
-
Mouse problems Mac - THE solution
I myself was irritating on the movements of the mouse. It is difficult to use accurately. Unwanted actions happens and he won't answer at any time. I found in contrast to a logitech mouse ordinary mouse mac is painful to use. But now, I found the
-
I have several albums in my music library, a lot of them, classical music, but now I see that on my iPhone6 they are all considered separate tracks. I want to play, for example, a right of the Symphony through without having to stop and select the n
-
OFFICEJET 7210: I need drivers for my Officejet 7210, printer all-in-one.
Hello everyone, maybe someone uses drivers for an Officejet 7210 all-in-one printer?, this printer is deleted and no longer supported by HP, I bought a new laptop and now I need to install drivers... Thanks for your hellp... Daniel
-
HP3070A I bought this printer, but what print or photocopy... for example a page with the content with a border (to create a box), left, right, down, margin superior 20px in Crete a wide area of page, although the (happy) box appears rotated at very
-
using a VI to open another stand alone program
Hey guys,. I would like for my program to be started by the user and some bring to pour some selections that would then open up a new program stand alone. Where each individual program would actually the bulk of the program as a whole and perhaps uta