Implementation of a new group with only on reading the presentation layer

Similar Questions

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• Is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

  When you work in Firefox, is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

  Firefox always opens a new window with the home page (s), you must use shift + left click on a link (bookmark) to open a page in a new window or just rip an existing tab by dragging the tab slightly downwards to open the tab in a new window.

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• Synchronization between two databases with only 2% of the data; Please help me

  Hi all
  
  I have two oracle databases in 2 different servers PROD and TEST instances. the two databases are in gr 10 2 in linux servers.
  
  My PROD database contains about 300 GB of data and is dedicated for production area.
  My Test database is dedicated to Spanish test for PROD database. (small server in terms of space and RAM comparing to PROD db)
  I would like to synchronize every week TEST db with PROD db with only 2% of the data and all the structures
  Could someone tell me, if you use a datapump export I can import only 2% of the amount of data and the structures ot theere is another way to do it?
  Thank you very much
  
  best regards,
  W

  I'm not really sure what you're talking about. There is no option, expdp and impdp x % of the data, is that? And if Oracle can sovle repositories inetegrity (PK, FK), it cannot be assumed which tables are lookup table (to be entirely exported) and can not assume the logical data integrity.

  Nicolas.

• I have a new laptop with Windows 7. The navigation (?) bar comes and goes, depending on the position of the cursor. I wish it were still visible. What should do?

  I just downloaded and configured FireFox for my new computer with Windows 7. I've included restaurateur Classic theme in my Add ons. I have only 1 bar (Navigation (?)) at the top of the screen, under the tabs. It has everything I need in there, but I want it to be stationary, rather than appearing when I move the cursor towards it & if I move the cursor away in endangered. I would like to be able to see the bar without having to stop what I'm doing to make it reappear. This seems to be a novelty. My old version of several weeks, do not. Help, please. Thank you...

  I can't think of anyway to make the Navigation bar appear/disappear based on the direction in which you move your mouse.

  Well, there is the view full screen, where the area of entire toolbar including the tabs slide bar up out of the screen and reappears if you drag the pointer of the mouse completely to the top. (You can use the F11 key to activate the full screen on and outside).

  Is it possible, that there is an option of one of your extensions?

• JS - selection of the center of the artboard / New Document with some dimensions of the artboard

  TL; DR:

  How do I Center my current selection to the artboard?

  as well as hitting the "align horizontal center" and the «align vertical center» buttons

  Hello

  I searched for the last two hours and before my head hit the keyboard I wanted to ask for help.

  What I am struggling with:

  in my init function, I create a new document and then copy all the layers of the previous document step by step to the new document and then save it as SVG.

  Init

  (function() {}

  Destination = Folder.selectDialog ("selecting a folder for files SVG.', docPath");

  If (! destination) {return ;}

  holderDoc = app.documents.add ();

  stepThroughAndExportLayers (docRef.layers);

  }());

  My problem is that holderDoc = app.documents.add (); always creates a document that is not the same size as my original document where the layers are copied from.

  so, I want the same artboard size as in my original document.

  I am fine with the fact that fixed values or directly take the values of the initial RFSO.

  I tried this on the segment where I create the new document:

  Init

  (function() {}

  Destination = Folder.selectDialog ("selecting a folder for files SVG.', docPath");

  If (! destination) {return ;}

  holderDoc = app.documents.add ();

  holderDoc.artboards [0] .artboardRect = [0,0,128,128];

  stepThroughAndExportLayers (docRef.layers);

  }());

  and receive this error message:

  "Error 1200: Illustrator error: 1346458189 ("PARM").

  Online: 83

  -> holderDoc.artboards [0] .artboardRect = [0,0,128,128]; »

  what I read on the web means that illustrator does not know what to choose document. but I called him directly. so, what could be the problem?

  to clearify: I don't want to adapt to the artboard for the images/layer. the work plan must always be a certain size. (for me 128px by 128px)

  Thank you for helping me to each fixing of my approach highly or offer a completely new.

  Thank you very much in advance.

  Edit: workaround solution

  
  

  (function() {}

  Destination = Folder.selectDialog ("selecting a folder for files SVG.', docPath");

  If (! destination) {return ;}

  var activeArtboard = app.activeDocument.artboards [app.activeDocument.artboards.getActiveArtboardIndex ()];

  var ABRect = activeArtboard.artboardRect;

  holderDoc = app.documents.add ();

  holderDoc.artboards.add (ABRect);

  holderDoc.artboards.remove (0);

  holderDoc.artboards.setActiveArtboardIndex (0);

  stepThroughAndExportLayers (docRef.layers);

  }());

  now, I added a new work plan to the new document with the same size as the work plan on the original document.

  I have remove the work plan predefined on the new doc and the new work plan as active.

  BUT!

  now, the work plan is not centered in the window. Illustrator that allows to place my image with ctrl + c-> ctrl + v somewhere outside the artboard.

  Now I need to align my selection in the center of the artboard. but I can't find any reference on how to Center a selection to the artboard.

  I don't know if I understand you right.

  If you want to create a new document with a fixed width and height, you can do this:

  var doc = app.documents.add(DocumentColorSpace.RGB, new UnitValue ("128", "px"), new UnitValue ("128", "px"));
  

  If you want to only align your objects selected on the artboard, you can try this:

  Note that the result may be different, if the clipping masks are exist in the document.

  Please test it first on copies of your documents. Use it at your own risk.

  // ArtboardCenterAroundSelectedPaths.jsx
  // works with CS5
  // http://forums.adobe.com/thread/1336506?tstart=0
  // (title: script to align selected objects to artboard)
  // quick & dirty, all selected items will be centered at the active artboard
  // (include clipping paths  !visible result can be different)
  
  // regards pixxxelschubser  19.Nov. 2013
  
  var aDoc = app.activeDocument;
  var Sel = aDoc.selection;
  
  if (Sel.length >0 ) {
      var abIdx = aDoc.artboards.getActiveArtboardIndex();
      var actAbBds = aDoc.artboards[abIdx].artboardRect;
  
      var vBounds = Sel[0].visibleBounds;
      vBounds_Li = vBounds[0];
      vBounds_Ob = vBounds[1];
      vBounds_Re = vBounds[2];
      vBounds_Un = vBounds[3];
  
  if (Sel.length >1 ) {
      for (i=1; i vBdsI[0] ) {vBounds_Li = vBdsI[0]};
          if( vBounds_Ob < vBdsI[1] ) {vBounds_Ob = vBdsI[1]};
          if( vBounds_Re < vBdsI[2] ) {vBounds_Re = vBdsI[2]};
          if( vBounds_Un > vBdsI[3] ) {vBounds_Un = vBdsI[3]};
          }
  
      aDoc.artboards[abIdx].artboardRect = [vBounds_Li +((vBounds_Re - vBounds_Li)/2-(actAbBds[2]-actAbBds[0])/2), vBounds_Ob -((vBounds_Ob - vBounds_Un)/2+(actAbBds[3]-actAbBds[1])/2), vBounds_Li +((vBounds_Re - vBounds_Li)/2-(actAbBds[2]-actAbBds[0])/2)+(actAbBds[2]-actAbBds[0]), vBounds_Ob -((vBounds_Ob - vBounds_Un)/2+(actAbBds[3]-actAbBds[1])/2)+(actAbBds[3]-actAbBds[1])];
      }
      } else {
          alert ("No selection");
          }
  

  Hope this is useful for you.

  Have fun

• How to properly install Adobe Creative Suite Design Standard (clouds pre-creative days) on the new imac with nothing other than the serial number

  I have cs6 Adobe Creative Suite Design Standard installed on my old macbook OLD pro (2007), and I need to also install this on my NEW imac (2015) as 2nd device. This product from adobe has been correctly registered in December 2012. I don't have the original installation CD (more there is no CD drive on these new devices in any case). I saw several download links, but I don't know which is correct (or if this is even the correct step). HOW to properly install my Adobe Creative Suite Design Standard on my new imac with nothing but my serial number? All I have is my online registration.

  (I'm even ready to uninstall the product on my older unit if it this will make easier, but as I get more than 1 my 1 license installation, I intend to proceed at the same time)

  Thank you!

  Just install it and activate it with your serial number (if it is compatible with your new operating system).

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• IS CUMULATIVE ATG 7 + PATCH SET 19 (FORMS) ONLY APPLY TO THE WEB LAYER

  Hello world
  
  
  We intend to apply the ADI 7 + Patch set 19 and everything works fine. But my question, we have three levels of Apps (WEB, Con, Form, Report), WEB, DB
  We applied on the layer Apps but there is a node have only the web layer and ADI 7 and patch set 19 for forms, there is no relationship with Web layer.
  
  
  in this case is it should be applied on this node also as we know Oracle "you apply patches that you apply it to the first node to the second node.
  
  
  What do you think?
  
  
  
  Best regards

  DB Apps(WEB,Con,Form,Report) three-tier, WEB,.

  You must apply the patch on each node when APPL_TOP and 8.0.6 $ORACLE_HOME are presented.

  Thus, according to the foregoing, you will have to do on nodes 1 and 2.

  Thank you
  Hussein

• Cannot read the presentation with music

  Hello:

  I have Adobe Reader X (Spanish) and the latest version of Flash Player installed.

  In Edit - Preferences - multimedia in Adobe Reader X, I set as default player 'Adobe Flash Player' since I don't have Windows Media Player or Quick Time installed in my computer.

  I'm playing a PDF presentation with sound. The same presentation, but without the sound works OK. Slides of the changes very well in auto mode.

  But trying to play (the sound is a sample audio .mp3) a Javascript window pops up saying "error Adobe playing this media clip.

  A friend in another computer with also Adobe reader X can read the file OK. His plays very well. But it has as default player for Windows Media Player.

  So maybe it's a wrog to Adobe Reader or Flash Player configuration?

  How can I solve problem?

  Best regards

  Gustavo

  The built-in Flash Player is used only for Flash Media created in Acrobat 9 or later - existing media will be * always * use an external application. As your PDF is version 1.5, that it should contain only legacy media, so it will take external applications registered for each type of file.

• Need help with TS to read the list of variables and/or LV

  Hello

  I use Labview adapter in Teststand to open WinIDEA and read the values of the variables. Basically LV lib files are used to read the value of the variable at run time, and returns the value of the variable. Contribution to this labview function i.e. variable name string and output type cluster.

  I need to read the list of variables and compare it to the value limits for each variable. I perhaps need to read at least 50 to 60 variables in one step if possible or a variable at a time in a loop. I want to add these variables in a txt file with the limits and read of Teststand as a string array and compare the result. In this way is easy to add or remove variables from the list and therefore their expected value. I tried to use the shipper of the property, but there need a stage name or local/global variable.

  Another way is to add the code in labview for comparison of variables value read, then I lose teststand power and flexibility.

  I am struggling to find the best way to achieve this. Any ideas?

  I would like it.  Basically, you have a file limit with 2 data tables.  A table contains your variables and the other your limits.  Then you wrap on a test of a string value.

  Let me know if you have any questions.

• 12.1.1 new install: AC-00402: cannot read the driver file: addbtmpl.drv

  Hello
  
  Im making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.
  
  I did the pre-installation steps according to metalink 761566.1
  He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. This is step 2 of 5-> database configuration 92% (RW50004). I can't proceed immediately.
  
  /U01/app/Oracle/DB/tech_st/11.1.0/appsutil/log/VIS_ < servername > 09171403.log
  
  Logfile located at /u01/app/oracle/db/tech_st/11.1.0/appsutil/log/VIS__ < servername > ApplyDatabase_09180926.log
  
  
  | 0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
  
  Cannot run configuration database using RapidClone
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  Thank you

  Im making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.

  You don't need to run the intermediate script if you have downloaded the site Web e-Delivery - in the electronic help files fast delivery to install in Oracle E-Business Suite Release 12 [406138.1 ID]

  I did the pre-installation steps according to metalink 761566.1
  He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. It is step 2 of 5--> (RW50004) database configuration 92%. I can't proceed immediately.

  0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv

  It seems that the file is missing.

  Please run md5sum according to (checksums MD5 for R12.1.1 Quick Install Media [802195.1 ID]) to check the integrity of the domain stage directory before running the quick installation.

  Thank you
  Hussein

• I'm about to buy a new laptop. I have installed the upgrade to Office 2007 some time ago and have the CD, but I don't have the original CD that I used to install Office 2003. How can I install Office 2007 on my new computer with only the upgrade CD?

  I am currently running XP.  I expect that the new laptop has Windows 7.

  Without the original installation media, Microsoft Office 2003, you cannot install a version upgrade of Microsoft Office 2007.  You would need to purchase a version of "Full license" of Office 2007. Carey Frisch

• Is it possible to have several buttons send grouped with different fields in the subforms on a single page?

  Hello world

  I have a form with two sections. Each section is a subform (the green boxes represent subforms in the screenshot) and each subform contains three required fields and a release button (the button submit to an e-mail address). The problem is that I can't seem to keep them separate. If I fill in the fields required in Subform1 and then click on the button 'Submit to regional HR', he took over the fields required in the subform 2. Is there a way to 'point' or 'group' these fields to each Submit button in their respective subforms?

  I can not be understanding the appropriate function or expects subform correctly. I learned designer of the life cycle on my own and with the help of this forum. Thank you very much for your help. -Chris

  

  I'm an amateur, but I decided to start helping as much as possible on these forums.

  I had a similar problem in the past and found a solution. I can't say with certainty that it is the best solution, but since each button has only 3 mandatory fields, it's a workable solution.

  So this is complicated but also somewhat simple solution that works. Please keep in mind my script experience is limited.

  For the first submit button allow the script to remain in its natural state. Make sure that your email presentation is correct. You will create a second button which will be a standard button. Change the text to be the same as the text for the first submit button. Within this button, the click event, puts a script like this.

  (

  If

  Required.Field.1.rawValue == null or

  Required.FIeld.2.rawValue == null or

  Required.FIeld.3.rawValue is nothing

  then

  xfa.host.messageBox = ("If you please fill all required fields")

  on the other

  Submit.Button.execEvent ("mouseUp")

  endif

  Repeat this step for the second button on the subform.

  now do the real hidden submit button and place the second button in its place. He will check the required fields have entered values and if they entered it will be then press the button to send real otherwise it will put in place the error message. This method requires that the mandatory fields are not marked as required by the value tab. They must be optional, if not built in scripts will interfere with the written order. This is a work around, but I found that it allows better control of the required fields. You can add a floating asterisk or perhaps a border coloured fields so that users are aware of what fields are mandatory.

  I really hope this helps. I know this can be confusing, but I understand that sometimes it can be difficult to get a response, so if I can be useful, I'll try.

• Add on tool bar appears, but add ons, and new custom toolbar only appears when the Customize window open - toolbar does not name in list of the toolbar?

  I used view = > toolbars = > and ticked all the toolbars that I want to appear. BUT add it to the toolbar appears blank (i.e. toolbar but no add ons). AND the new custom toolbar that I created is not yet listed in the toolbars available for check or not. The only way I can get to show upward (but no function) is by clicking the Customize button. The toolbar remains open as long as the window is customize, and I can add/remove/rearrange icons, but not use any of their functions (for example. I added a new button to the custom toolbar window, but when I click of course nothing happens, because another window - window customize - is still open). I need a way to lock the toolbar, so I can access buttons to use it please!
  BTW use Windows 8 and just went from IE (and fearing that I'll have to downgrade...)
  TNX so much.

  In my opinion, which suggests that what you were actually doing was to customize the toolbar of the addons. Firefox is quite flexible and you can for example put the print icon on the toolbar of the modules or the bookmarks toolbar, and not only on a new designed user a custom toolbar.

  Many modules are designed by their developers do not make use of the toolbar of the add-on. Some add-ons appear on other menus. Collusion shows also in the Tools menu. Some use the page modules interface for results or settings.