Implementation of a simultaneous execution of the same activity instances

Similar Questions

• Configure replication vSphere fails - there is a virtual machine that has the same UUID instance than the one you are trying to configure

  Hi all

  
  

  My colleague was trying to extend a hard disk of a server 2008R2 who (1) had a snapshot and (2) was being replicated. The operation has failed and they took the snapshot replication can be stopped. Long story short when I got to him, the server could not be configured for replication and could not extend the disk and a vMotion failed.

  Looking at the files of the VM on the data store and the VMs .vmx file we have all the characteristics of a virtual machine always configured for replication of vSphere. If you try to configure replication vSphere causes an instant error "vsphere replication does not support change the length of a replicated disk. After a few changes I can reconfigure vSphere new replication, however, when the wizard has finished, I get a new error message (see below):

  "Try to set up vSphere that replication has failed for the VM"name vm"during the creation of groups"vm". There is a virtual "vm-name" machine that has the same instance UUID ' UUID of the Virtual Machine "that you want to configure. The existing vSphere of replication is configured for site protection.

  A possible solution would be to reset the database embedded VRMS our DR as suggested here VR configure replication after losing a VC site server but I was wondering if there is another solution? I have not reset the database of VRM before and cannot find a document that tells exactly what to do. I guess I need to stop all the rehearsals before resetting the database?

  See you soon,.

  Dean

  Hello

  There is no need to reset the VRMS database.

  If you know the value GID... an orphan replication, you can use the CROWD VRMS (https://vrms_address:8043/mob/?moid=GID-...&vmodl=1) to call the destroy method - it is eliminating simple replication to the site of the source or the target.

  If you don't know the GID... value, it can be found of VRMS DB or log files. Please file an SR for assistance.

  This procedure is already documented in internal KB articles and help using VMware support:

  KB article internal 2056086, section "cannot replicate virtual machine as there is another virtual machine with the same UUID instance"

  and also internal KB article 2060751.

  The admin guide section will be updated as it is confusing right now by suggesting only to reset the DB.

  Kind regards

  Martin

• Firefox for Android does not implement HW keyboard shortcuts, please add the same as the desktop version!

  Hello
  I use a bluetooth keyboard and noticed that the classic keyboard shortcuts do not work with Firefox for Android. This is a major gap, with chrome, you can use the same shortcuts on the desktop version, it would be nice to have a comparable feature on Firefox for Android too.

  Hardware keyboards are a useful supplement to the tablets and the last iterations of keyboard 'sexy' as one that is available for the Google Nexus 9 are practical and folio desiderable.
  Please add this improvement soon!

  Thank you!

  Hello, this is a mainly managed by the community support forum is probably not the right place for the characteristics of the request (we are unable to implement all the features & devs read here).
  Please use https://input.mozilla.org/feedback for either your reactions or if you think that it is a missing feature in the browser file a bug at bugzilla.mozilla.org.

• DAQmx Read simultaneous calls on the same digital line

  Hi all

  I use v10.0 LV 32-bit on Windows 7.

  I use DAQmx Read (in a task) to check the value of a digital line. Is it OK to do this in two different locations in a program at the same time for the same digital line? Or I have to put a wrapper around reading to force operations to be sequential?

  Thank you
  Zola

  When you need to expose the capabilities of resources to multiple areas within a project (expand the scope of a resource) it is common to wrap the resource in an Action engine to encapsulate the resource functions. See here for an example of a 'Module on resources' material and a discussion animated about how this code help development construction and avoid resource conflicts.  If you have not read famous nugget again – he of Ben is a link in my tag "Required_Reading".

  Or more directly.  Yes, you should encapsulate these readings DAQ to avoid suspended

• Simultaneous animations on the same event Enter_frame

  I created a class that extends a line on Enter_Frame event. I want to display on the stage, but I want to animate its position using Enter_Frame event.

  How to do the two animations at the same time?

  I have added this script to the timeline:

  gLine.addEventListener (Event.ENTER_FRAME, movegLine);

  function movegLine(E:Event):void {}

  If (gLine.x < = 800) {}

  gLine.x += 1;

  }

  }

  where gLine is the instance of the class lively.

  The result is that, AS anime position, then animates the extension of the line. But I want the two actions take place at the same time - something like the rotation of the wheels of a car at the same time, moving to the position of the car. Any suggestions?

  I think I have discovered my error. The scene must add the listener of events such as opposted to the line

• simultaneous execution of the procedures

  I have a requrement in which I want to call different instances of a procedure of passing different parameter values at the same time. I am currently selecting data in a slider and make the entire process one by one. But this approach is time consuming. The only other way I know to fix the problem is to store the cursor data into a java array and then call the procedure for each value of the slider by Threading.
  
  The scenario is something like this:
  
  Create procedure prc_process
  is
  Start
  I'm in (departmentid selection of departments)
  loop
  ...
  some complexes of treatment which includes DML operations in the employee table, based on the departmentid
  ...
  end loop;
  end;
  
  Now, the employees table contains something around 20 million data.
  
  I want to have a such scenario for all departments in the departments table, I can call the procedure in this way:
  
  Create procedure prc_process (deptid number)
  is
  Start
  ...
  some complexes of treatment which includes DML operations in the employee table, based on the departmentid entry
  ...
  end;

  Personally, I'm not going to do such thing. I'd like to try to bring the list of departments in the basic procedure and try to do it in one fell swoop. Don't not passing one by one.

  But if this is not feasible and that you want to run the procedure for each service separately then Yes, submitting to a job is a way to allow a run in parallel.

• Plans of multiple executions for the same SQL statement

  Dear experts,
  
  awrsqrpt. SQL shows several plans for a single SQL statement executions. How is it possible that a single SQL statement will be several Plans of executions within the AWR report.
  
  Here is the output of the awrsqrpt for your reference.
  
  

  WORKLOAD REPOSITORY SQL Report
  
  Snapshot Period Summary
  
  DB Name         DB Id    Instance     Inst Num Release     RAC Host
  ------------ ----------- ------------ -------- ----------- --- ------------
  TESTDB          2157605839 TESTDB1               1 10.2.0.3.0  YES testhost1
  
                Snap Id      Snap Time      Sessions Curs/Sess
              --------- ------------------- -------- ---------
  Begin Snap:     32541 11-Oct-08 21:00:13       248     141.1
    End Snap:     32542 11-Oct-08 21:15:06       245     143.4
     Elapsed:               14.88 (mins)
     DB Time:               12.18 (mins)
  
  SQL Summary                            DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542
  
                  Elapsed
     SQL Id      Time (ms)
  ------------- ----------
  51szt7b736bmg     25,131
  Module: SQL*Plus
  UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(ACCT_DR_BAL,
  0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND TEST_ACC_NB = ACCT_ACC_NB(+)) WHERE
   TEST_BATCH_DT = (:B1 )
  
            -------------------------------------------------------------
  
  SQL ID: 51szt7b736bmg                  DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542
  -> 1st Capture and Last Capture Snap IDs
     refer to Snapshot IDs witin the snapshot range
  -> UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(AC...
  
      Plan Hash           Total Elapsed                 1st Capture   Last Capture
  #   Value                    Time(ms)    Executions       Snap ID        Snap ID
  --- ---------------- ---------------- ------------- ------------- --------------
  1   2960830398                 25,131             1         32542          32542
  2   3834848140                      0             0         32542          32542
            -------------------------------------------------------------
  
  
  Plan 1(PHV: 2960830398)
  -----------------------
  
  Plan Statistics                        DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542
  -> % Total DB Time is the Elapsed Time of the SQL statement divided
     into the Total Database Time multiplied by 100
  
  Stat Name                                Statement   Per Execution % Snap
  ---------------------------------------- ---------- -------------- -------
  Elapsed Time (ms)                            25,131       25,130.7     3.4
  CPU Time (ms)                                23,270       23,270.2     3.9
  Executions                                        1            N/A     N/A
  Buffer Gets                               2,626,166    2,626,166.0    14.6
  Disk Reads                                      305          305.0     0.3
  Parse Calls                                       1            1.0     0.0
  Rows                                        371,735      371,735.0     N/A
  User I/O Wait Time (ms)                         564            N/A     N/A
  Cluster Wait Time (ms)                            0            N/A     N/A
  Application Wait Time (ms)                        0            N/A     N/A
  Concurrency Wait Time (ms)                        0            N/A     N/A
  Invalidations                                     0            N/A     N/A
  Version Count                                     2            N/A     N/A
  Sharable Mem(KB)                                 26            N/A     N/A
            -------------------------------------------------------------
  
  Execution Plan
  ------------------------------------------------------------------------------------------------
  | Id  | Operation                    | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
  ------------------------------------------------------------------------------------------------
  |   0 | UPDATE STATEMENT             |                 |       |       |  1110 (100)|          |
  |   1 |  UPDATE                      | TEST            |       |       |            |          |
  |   2 |   TABLE ACCESS FULL          | TEST            |   116K|  2740K|  1110   (2)| 00:00:14 |
  |   3 |   TABLE ACCESS BY INDEX ROWID| ACCT            |     1 |    26 |     5   (0)| 00:00:01 |
  |   4 |    INDEX RANGE SCAN          | ACCT_DT_ACC_IDX |     1 |       |     4   (0)| 00:00:01 |
  ------------------------------------------------------------------------------------------------
  
  
  
  
  Plan 2(PHV: 3834848140)
  -----------------------
  
  Plan Statistics                        DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542
  -> % Total DB Time is the Elapsed Time of the SQL statement divided
     into the Total Database Time multiplied by 100
  
  Stat Name                                Statement   Per Execution % Snap
  ---------------------------------------- ---------- -------------- -------
  Elapsed Time (ms)                                 0            N/A     0.0
  CPU Time (ms)                                     0            N/A     0.0
  Executions                                        0            N/A     N/A
  Buffer Gets                                       0            N/A     0.0
  Disk Reads                                        0            N/A     0.0
  Parse Calls                                       0            N/A     0.0
  Rows                                              0            N/A     N/A
  User I/O Wait Time (ms)                           0            N/A     N/A
  Cluster Wait Time (ms)                            0            N/A     N/A
  Application Wait Time (ms)                        0            N/A     N/A
  Concurrency Wait Time (ms)                        0            N/A     N/A
  Invalidations                                     0            N/A     N/A
  Version Count                                     2            N/A     N/A
  Sharable Mem(KB)                                 26            N/A     N/A
            -------------------------------------------------------------
  
  Execution Plan
  ---------------------------------------------------------------------------------------------
  | Id  | Operation                    | Name         | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------------------------
  |   0 | UPDATE STATEMENT             |              |       |       |     2 (100)|          |
  |   1 |  UPDATE                      | TEST         |       |       |            |          |
  |   2 |   TABLE ACCESS BY INDEX ROWID| TEST         |     1 |    28 |     2   (0)| 00:00:01 |
  |   3 |    INDEX RANGE SCAN          | TEST_DT_IND  |     1 |       |     1   (0)| 00:00:01 |
  |   4 |   TABLE ACCESS BY INDEX ROWID| ACCT         |     1 |    26 |     4   (0)| 00:00:01 |
  |   5 |    INDEX RANGE SCAN          | INDX_ACCT_DT |     1 |       |     3   (0)| 00:00:01 |
  ---------------------------------------------------------------------------------------------
  
  
  
  Full SQL Text
  
  SQL ID       SQL Text
  ------------ -----------------------------------------------------------------
  51szt7b736bm UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL, 0) +
                NVL(ACCT_DR_BAL, 0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND PB
               RN_ACC_NB = ACCT_ACC_NB(+)) WHERE TEST_BATCH_DT = (:B1 )

  Your contribution is very much appreciated.
  
  Thank you for taking your time to answer my question.
  
  
  Concerning

  Oracle Lover3 wrote:
  How will I know (from Plan 1 and Plan 2) whose execution plan chose for the current run?

  Since you're already on 10.2, you can identify the actual execution plan by checking in V$ SESSION SQL_ID and SQL_CHILD_NUMBER column. This can be used to identify the plan in V$ SQL_PLAN (columns SQL_ID and CHILD_NUMBER) and in 10g, you can use the convenient DBMS_XPLAN. Function DISPLAY_CURSOR for the information of the real plan using these two parameters.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Master multiple ODI in the same DB Instance repository

  Hello

  Is it possible to create several ODI Master Repository in DB even. When I try to create a second master repository using the remote control, it fails during the initial validation controls:

  2015-09-21 11:55:54.105 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: task execution: run before create operations

  2015-09-21 11:55:54.106 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.CustomCompManager::getActionList: CustomCompManager.getActionList: CUSTOM_COMP_PRELOAD_SETUP

  2015-09-21 11:55:54.112 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidationRule result was false. Jump action: oracle.ias.version.SchemaVersionUtil:utilCreateRegistryAndCopyData

  2015-09-21 11:55:54.115 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.ActionThread::run: JavaAction command = oracle.ias.version.SchemaVersionUtil:utilCreateRegistryTable

  2015-09-21 11:55:54.115 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.ActionThread::run: JavaAction method = utilCreateRegistryTable

  2015-09-21 11:55:54.116 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.ActionThread::run: connect as owner: false

  2015-09-21 11:55:54.116 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = "HOST_NAME")(protocol=tcp) (port = 1521)) (connect_data = (service_name = "SERVICE_NAME") (server = dedicated)))

  2015-09-21 11:55:54.248 INCIDENT_ERROR UCR: oracle.sysman.assistants.rcu.backend.action.ActionThread::run: could not execute the method: exception:

  java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.sysman.assistants.rcu.backend.action.ActionThread.run(JavaAction.java:510)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: java.sql.SQLSyntaxErrorException: ORA-00955: name is already used by an existing object

  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)

  at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)

  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)

  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)

  at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:183)

  at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:942)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)

  at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1770)

  at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1739)

  at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:299)

  at oracle.ias.version.SchemaVersion.createRegistryTable(SchemaVersion.java:883)

  at oracle.ias.version.SchemaVersionUtil.utilCreateRegistryTable(SchemaVersionUtil.java:203)

  ... 6 more

  2015-09-21 11:55:54.248 rcu ERROR: oracle.sysman.assistants.rcu.backend.action.AbstractAction::handleNonIgnorableError: Non-Ignorable receipt error: ORA-00955: name is already used by an existing object

  2015-09-21 11:56:09.116 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: UCR failed

  oracle.sysman.assistants.common.task.TaskExecutionException: UCR - 6135:Error then that he was trying to execute the action of Java.

  at oracle.sysman.assistants.rcu.backend.task.AbstractCompTask.execute(AbstractCompTask.java:302)

  at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: oracle.sysman.assistants.common.task.ActionFailedException: UCR - 6135:Error then that he was trying to execute the action of Java.

  at oracle.sysman.assistants.rcu.backend.action.ActionThread.run(JavaAction.java:537)

  ... 1 more

  Hi all

  I found the resolution of this problem. I dropped the table SYSTEM. SCHEMA_VERSION_REGISTRY$ which was controlled during the validation and the UCR was trying to somehow to re-create the same table. I found that the steps of validation in the Componentinfo.xml file.

  Concerning

  Rohan M

• Help please - why is noon suddenly registered double on the same track (instances on several tracks)?

  Hello everyone, I have been recording of MIDI tracks years on my MacBook with no problems. All of a sudden, MIDI tracks began to record notes duplicate (exact replica - even not, same speed, etc.). ... This has happened on most, but not all, tracks I recorded in the past day or so.

  I was working on a special project with a lot of MIDI tracks and a couple of audio tracks - what is shown in the YouTube video that I have included to illustrate the problem:

  https://youtu.be/AaNOxfwzsmg

  All MIDI tracks recorded in this project before the past 24 to 48 hours recorded normally without duplication. About 90% of the tracks I recorded recently have duplication. The first brief example in the video shows the bass track, that duplication of work and represents 90% of the securities. The next example short - track of cajon - has not been saved with the duplication (so far, it's the only track I checked and made record normally in the last 2 days. Pieces recorded both before and after that the cajon track was duplicated notes throughout.

  The MIDI keyboard, I use as a controller as a Roland FP80. I used this keyboard for all MIDI tracks that don't require modulation or tar leaning over recent months. The MIDI keyboard transmit channel is set to 1, and to my knowledge, there very lunch limited functionality and cannot transmit multiple channels. (It's a good size weighted keys digital piano and this is why I use it.)

  If anyone can help identify the cause of this problem I would really appreciate it! The second part of the question is I would like a quick and easy way to delete ONLY the notes duplicate on all these tracks. I had already saved 7 or 8 in the project MIDI tracks until I discovered this problem when I started to delete some notes. I would like to be able to preserve what has been recorded.

  BTW, I looked for this problem and found a similar thread, but I think that the solution is that the used keyboard passed on several MIDI channels. As much as I know who does not apply in this case.

  Thanks in advance!

  SYSTEM SPECS:

  MacBook Pro (retina, 13 inches, end of 2013)

  Mac OSX Yosemite - version 10.10.5

  Processor: 2.4 GHz Intel Core i5

  Memory: 8 GB 1600 MHz DDR3

  Graphics card: Intel Iris 1536 MB

  Logic Pro X - version 10.2.0

  Working backwards... You can remove duplicate events by selecting all the events in a region (cmd-A) if in the roll of piano or selecting the region then go to menu edit - midi events Delete - reproduced.

  or (D).

  On why - there could be a number of reasons... First, open the list of events by pressing D and see if they are in fact identical... especially on the same channel environment.

  Also - if you could upload a screenshot of the low track to include both region and the railway inspector.

  

• How will probably remember the same activity (subprocess) time-out error?

  Hello

  How to recall the subprocess/activity if the error activity is?

  My use case is: I need to call vCO of cpo (using Webtarget or by using Windows Powershell Script activity). in case of timeout error, I need to redo the same call. Can someone please help on this.

  Thank you

  Deneche.

  It is not intrinsically built in 'reminder' However, it's not hard to do through content creation.

  If you believe that this activity is not much so I could do this...

  * Install a local default variable, boolean false

  * Set a while loop runs while the local boolean is false

  * When the tracks activity if his condition is successful or not is not, then set to Boolean true

  Who should do what you want, but a best practice, I'd be a lot out there try to limit the number of times wherever he would try before you must notify yourself it might be a real problem.

  -shaun

• It Possible to work with the same object instance Calendar?

  Dear Experts
  
  Can you please help me with this one... I get the same experience for all employees even if I changed the dates:
  
  Maybe to get the complete code you will be an overview

  import java.util.Calendar;
  
   class Employee {
      private Calendar doj;
      private String empname;
      void setEmpName(String empname)
      {
          this.empname = empname;
      }
      String getEmpName()
      {
          return this.empname ;
      }
      void setDoj(Calendar doj)
      {
          this.doj = doj;
      }
      Calendar setDoj()
      {
          return this.doj ;
      }
      int ExperienceInYears(Calendar now)
      {
              int todayday=0,dobday=0;
              if (doj.after(now)) {
              throw new IllegalArgumentException("Date Error! Doj > today");
          }
          int year1 = now.get(Calendar.YEAR);
          int year2 = doj.get(Calendar.YEAR);
          int yrs = year1 - year2;
          int todaymonth = now.get(Calendar.MONTH);
          int dobmonth = doj.get(Calendar.MONTH);
          if (dobmonth > todaymonth)
          {
              yrs--;
          }
          else if (todaymonth == dobmonth)
          {
              todayday = now.get(Calendar.DAY_OF_MONTH);
              dobday = doj.get(Calendar.DAY_OF_MONTH);
              if (dobday > todayday)
              {
                  yrs--;
              }
          }
          return yrs;
      }
  }
  
  public class Main {
      public static void main(String[] args) {
          Calendar doj,today;
          int yrs;
          today = Calendar.getInstance();
          doj = Calendar.getInstance();
          today.set(2011, 3, 14);
  
          Employee e1 = new Employee();
          Employee e2 = new Employee();
          Employee e3 = new Employee();
  
          e1.setEmpName("John Denver");
          doj.set(1990, 1, 2);   // First Time
          e1.setDoj(doj);
       
          e2.setEmpName("Olivia Newton");
          doj.set(2002, 12, 12); // Second Time
          e2.setDoj(doj);
  
          e3.setEmpName("Neil Diamond");
          doj.set(2005, 3,3);    //Third time
          e3.setDoj(doj);
  
          yrs=e1.ExperienceInYears(today);
          System.out.println("The Employee " + e1.getEmpName()+ " has " + yrs + " years of exprience" );
  
          yrs=e2.ExperienceInYears(today);
          System.out.println("The Employee " + e2.getEmpName()+ " has " + yrs + " years of exprience" );
  
          yrs=e3.ExperienceInYears(today);
          System.out.println("The Employee " + e3.getEmpName()+ " has " + yrs + " years of exprience" );
      }
  }

  Published by: standman on March 14, 2011 12:37

  standman wrote:
  If I have three different dojs can I get the right answer! But why?

  What said Kayaman; However, now that you know this, you see that there is a much better way to set up your employees? (Hint: think of an employee (String, int, int, int) constructor).

  Winston

• Several calls simultaneous webservice for the same operation

  I'm having a problem trying to call the web service even operation twice with different parameters. The call is executed twice (I'm passing data token in order to differentiate the event handler calls), but the parameters of the second call are replacing the first. Here is the code:
  
  .the wsCodeList ["GetTupleList"]. TupleName = "BUSTYPE";
  Subject: call var = wsCodeList ["GetTupleList"] .send ();
  Call.destination = "busType";
  
  .the wsCodeList ["GetTupleList"]. TupleName = "ENTTYPE";
  Call = wsCodeList ["GetTupleList"] .send ();
  Call.destination = "entityType";
  
  MXML:
  
  < mx:WebService id = "wsCodeList".
  "WSDL =" http://simulacrum.hallmarkins.net/ProgramQuoter/codeList.wso?wsdl "
  useProxy = "false" result = "onCodeListResult (event)" >
  < name mx:operation = "GetTupleList" resultFormat = "e4x" / >
  < / mx:WebService >
  
  Manager:
  
  private void onCodeListResult (oEvent): void
  {
  Subject: call var = oEvent.token;
  var xmlResult:XMLList = oEvent.result;
  trace (Call.destination);
  If (call.destination is "busType")
  {
  busType.dataProvider... xmlResult = mspace::description;
  }
  If (call.destination is "entityType")
  {
  entityType.dataProvider... xmlResult = mspace::description;
  }
  }
  I'm back only the expected result for the call to TupleName "ENTTYPE" twice. So it seems that the setting is getting crushed until the call goes out. What I am doing wrong?
  
  Thank you
  
  OLIVER

  First of all, use AsyncToken instead of the ordinary object. From there on.
  Tracy

• I get two, at the same time, instances of 'connection' tabs when I start. Used to be one?

  When you first start, the status of 'connection' on the first tab is immediately next to another tab saying 'starting' I then remove the second tab.

  Maybe you set inadvertently two home pages?

  See How to set the home page

  URL of the home page are separated by the symbol "pipe" | When you have more than one homepage set.

• Windows has asked for the same activation when I did

  So, I bought a Dell computer with Windows 7. Recently, I tried to install Windows XP Mode, and they keep telling me to install Microsoft Genuine. I install but the site won't let me download Windows XP Mode. They said he failed and redirect me to to buy genuine Microsoft Software Web site. I did not, but on the page, they show a few ways to activate Windows. I followed it by clicking 'activate' in the start menu > search. There is activate Windows so I click on it. Because they required the product key I just close the window. But after the restart, screen blackout curtains and the activation window appear saying activation has expired. After clicking on cancel, I check in my computer > properties and see that Windows is activated with the product ID.  I don't want to turn on the computer every time to see a window and cancel it. Also, I don't know where is the product key on my computer (it's a Dell Precision 390 upgrade of Windows XP). Those who know how to solve this problem?

  I suggest you try to get a satisfaction of the seller. (threats to involve the application of the law for fraud can help)

  the retail price for a full version of ultimate is about $319,00
  the only other choice is to buy a genuine windows. family premium is $199 price but I see that some legitimate retailers are discounting about $170,00
  You can try to get a your manufacturer OEM xp recovery disk if they have yet.

• Multiple simultaneous connections to a secure area with the same id/password user

  I was wondering if someone can answer this.

  We are creating a secure member area - there will be 3 area secure, air-conditioned and equipped with identical conent - a (one-time) 3 day trial, monthly subscription (recurring) and annual subscription (recurring).

  The user logs in the generic secure area.

  At this point, we can have multiple simultaneous connections with the same credentials in the secure area user - I was expecting it to be like the administration area where you get hunted if someone else logs into your account.

  Is there a way to limit the number of simultaneous connections with the same ID and password to a secure area (generic)?

  See you soon

  Pat

  This is actually a bug that they re not for awhile. If you connect to another place he should expel you from the other source of security.