Implementation of a WebDAV repository

Similar Questions

• WebDAV repository changes be reflected not in BPEL

  My problem is that I have the repository of files running on a machine a WebDav. I installed a service of process and the decision of BPEL in machine B. The decision service uses the machine A WebDav repository. Everything works fine, but when I make changes in the repository, these changes not reflected in the BPEL process until I have fired the BPEL process. Can you please let me know the solution to this problem?
  
  Good luck
  Sanjay

  Hello

  Wait a minute, there should be no redeployment of the BPEL process. You must ensure that you are
  the BPEL PM 10.1.3.3 or 10.1.3.4. For 10.1.3.1 we released a single patch to make the decision service to listen to
  changes in a repository of WebDAV rule.

  For the rule file-based repositories, there is also no necessary redeployment. A common mistake here is that evil
  file repository of rules are updated.
  For rule repositories based on files (and people should only use for development), we package repository under
  a part of the EAR of Service decision and as such, it will be deployed with the service of the decision. As a result, the location
  file repository for your decision service will be located under the rule? OH/j2ee/oc4j_soa/applications/rules_default_.../WEB-INF/repository

  Kind regards
  Ralf

• How to connect with webdav repository XML DB - Oracle12c - Windows 7

  Hello

  I installed Oracle12c in Windows 7 (64-bit)
  How to access the XML DB repository with WebDAV protocol?
  What is the URL to use? That the user use?
  
  Try to use the user 'system' because I think there privileges because I create folders with PL / SQL (dbms_xdb.createfolder (' / public / NewFolder ');)
  
  In principle I try the web client W7: https://localhost:5500 because I see that the listener was listening to the HTTP protocol at the following address (TCPS); 3 times asking me the user name and password.
  , Error: the folder you entered does not appear to be valid. Please choose another

  
  I have check the HTTP DBMS_XDB port. GETHTTPPORT () and I get the result 0.
  Then Active: DBMS_XDB. SETHTTPPORT (8080) control, and tells me that I turn on port 8080.

  
  I try to connect via WebDAV: http://localhost: 8080 . 3 times asking me username and password
  , Error: the folder you entered does not appear to be valid. Please choose another
  
  I know that this error may be due to the web client Windows 7 and so I tried a web client like Cyberduck. In this case, I can't connect indicating to the user 'system' of authentication errors.
  

  
  

  And... I can connect without problems to XML DB Repository in Oracle 11 g 1 material and Oracle 11 g 2!

  
  Any idea?

  Hello

  After many hours, I found the cause and solution.

  The XDB in Oracle12c server with authentication "digest" rather "' basic in Oracle11g.

  This configuration is in the file "xdbconfig.xml" in the XML DB repository and the need to change it, but if you can not access through WebDAV... How to do? Then via PL / SQL:

  SET SERVEROUTPUT ON

  DECLARE

  in the XMLTYPE.

  BEGIN

  SELECT updateXML

  (DBMS_XDB.cfg_get)

  , ' / xdbconfig/sysconfig/protocolconfig/httpconfig/authentication/allow-mechanism / text () '

  , 'basic '.

  "' xmlns ="http://xmlns.oracle.com/xdb/xdbconfig.xsd"').

  To the

  DOUBLE;

  DBMS_XDB.cfg_update(àles);

  DBMS_XDB.cfg_refresh;

  end;

  /

  And that's all. I hope I can help those who encounter the same problem.

• storage of XML documents in XML DB via WebDAV repository, I received the error message

  Hi all
  
  I registered with five success (including each other) patterns.
  57 tables were generated.
  
  When I tried to store documents in XML DB repository via WebDAV, XML I got the error message:
  "year error occurred copying part or all of the selected files.
  and none of the XML data loaded into tables.
  
  It is one knows what was wrong?
  
  Thank you very much!
  
  Cow

  See the Oracle XMLDB Development Guide. There is an example detailed in this manual.

• Help to the implementation of a local repository for downlooading and install all updates from MS on all my windows on my local LAN computers

  Hello

  I am planning to move to our new home in the country next year where I won't have highspeed internet (15 MB / Sec) and the threshold of large data capacity (250 GB) (Comcast).

  Currently we will be able to get the wild blue Satellite service (1.5 MB / Sec) with a 7-12 GB monthly Cap

  I am currnelty use 75 GB per month to update the 5 computers and stream netflix movies and download all my podcasts.

  May - some please point me in the direction where Microsoft provides the service / ability to download and manage these patches via a MS unique source and then I could build rivierra deposit on my LAN?

  I know that it is available for business facilities it would be nice to be able to install this feature for the professional user home / small.

  Kind regards

  Dennis

  Security updates are available on ISO-9660 DVD5 from the Microsoft Download Center image files
  http://support.Microsoft.com/kb/913086

  More options on the page of my colleague TaurArian: http://taurarian.mvps.org/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• .zip bundle event notification registration

  The LCCS API contains an event notification for when the ZIP file group reached the WebDAV repository?

  Or. Is this something I'm going to have to implement

  Thank you.

  No event for this right now. You will need to implement a filter on your Web server (or by controlling the content of files).

• Migration from MySQL to Oracle SQL does not

  Hello everyone,

  I am new to Oracle SQL, but since our MySQL database is more and get more slowly, I would like to test the performance of Oracle SQL.

  So, I downloaded the current Oracle Linux distro and installed Oracle Database 11 g Express Edition.

  I connected with Oracle SQL Developer and started to migrate the MySQL database by following each step of this tutorial.

  I had to abandon all the privileges of the user migration (otherwise the creation and the deleteion of the migration repository did not) and I have disabled the migration of constraints to make migration work.

  Then I proceeded through all of the steps of the tutorial and ended with a "successful migration.

  The last step of the tutorial, it was to connect to the db migrated (using a combination of username/password generated name), it was not possible.

  What do I already checked?

  • Logged on as user system, I see that there is no new user created for the migrated db
  • Looking at the overview in the migration repository I see 3 phases, not knowing if the third displays an error or if it is not necessary at all (I got 58 tables in the db of the source)
    • Capture of 58/58
    • Convert 58/58
    • Compile 0/58

  From here, I don't know where to look for additional errors.

  I still can't use the migrated db and so I can't go forward with my tests.

  I missed something?

  I would appreciate your help.

  Astaldo

  Astaldo salvation,

  First, you must use SQL Developer 4.0.2 If you aren't already. It is available for free on OTN

  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/downloads/index-098778.html

  There are two ways to convert tables from MySQL to Oracle.

  1) copy to Oracle

  (2) migration to Oracle.

  Copy to Oracle is the simplest method. It does not imply the creation of a repository of migration.  But it only migrates data without constraints or default values or indexes and tables. The set of data to move should be reasonably low as it is moved on JDBC.

  It may suit your purpose to try to Oracle.

  http://dermotoneill.blogspot.co.UK/2010/11/copy-to-Oracle.html

  Migrate Oracle requires the implementation of a migration repository. But he migrate the default settings, constraints, and indexes and can also provide scripts offline data move that can manage the circulation of large data sets.

  Here is a small script to create a new MIGRATIONREPO user, and grant the correct privileges.

  CREATE USER MIGRATIONREPO IDENTIFIED BY oracle.

  ALTER USER MIGRATIONREPO QUOTA UNLIMITED ON USERS;

  GRANT CONNECT, RESOURCE, CREATE VIEW, CREATE MATERIALIZED VIEW to MIGRATIONREPO;

  Then using SQL Developer, create a connection to MIGRATIONREPO, right-click on the connection and choose "associate the Migration repository.

  I hope you have success best creation of migration with the privileges of theses repository.

  Migration Wizard step 8: target database

  Choose Offline Mode.

  This will present you with a build script that you can inspect before the race.

  The build script must be run using the SQL Developer worksheet and choose free user sufficiently privileged in Oracle generally SYSTEM.

  Note that if you would rather work with the repository you must currently you can browse your browser of Migration.

  Access converted database objects, right-click and select "generate the target".

  This will again open the Migration Wizard in step 8. Allowing you to choose Offline Mode so that you can review the build script.

  Hope this helps,

  Kind regards

  Dermot.

  SQL development team.

• How can I programmatically determine the super-type of RepositoryItem

  I have a bunch of point-descriptors that share a common supertype of 'product' as below...
  
  < name point-descriptor = "visualmedia" super-type 'product' = display-name = 'Visual Media' sub-sub-type-value = "visualmedia" >
  < name point-descriptor = 'application' supertype 'product' = display-name = "Application" sub-sub-type-value = "application" >
  
  .
  
  In my code, it is pretty easy to get kind of a RepostitoryItem as...
  
  String itemType = item.getItemDescriptor () .getItemDescriptorName ();
  gives "visualmedia" or "application".
  
  .. .but what I really need, is the RepositoryItem super-type value of 'product '. Does anyone know how to do this?
  
  Bob

  It is always better to write code using the repository API, if possible, rather than dive into implementation of the particular repository as the GSA. The atg.repository.RepositoryUtils class is your friend. He takes care of some instanceof checks and casts are needed. It probably has the methods you need. Here are some options related to your question.

  RepositoryItemDescriptor getBaseItemDescriptor(RepositoryItemDescriptor pItemDesc) - if pItemDesc is not a GSAItemDescriptor, it will be returned to you. If it's a GSAItemDescriptor, you will get back GSAItemDescriptor.getBaseItemDescriptor. The base is the root of a multilevel inheritance tree. If the input parameter has no supertypes, it will be returned. In other words, you won't get back to a null value.

  RepositoryItemDescriptor getParentItemDescriptor(RepositoryItemDescriptor pItemDesc) - This returns an immediate supertype or null if the input type without a supertype.

  Boolean isTypeOfItemDesc (RepositoryItem, RepositoryItemDescriptor pSuper pItem) - returns true if pItem is a pSuper or pSuper anywhere in its supertype tree. This is analogous to java instanceof. There is an overloaded version of this method where you can spend in a RepositoryItemDescriptor for the first parameter, if this happens to be most convenient for you. If you start with a RepositoryItem, there is no need to get his ItemDescriptor your own.

  The code in GSAItemDescriptor.getSuperTypeDescriptor isin was exactly the same as getParentItemDescriptor, and I'm not enough to know if they would give you different answers, an expert of GSA. I doubt it. My guess is that isTypeOfItemDesc is what you really want.

• Download images and saving them to a folder

  Well Hello, this is my first topic here in the oracle forums and I m already ask something, sry, but I really need help on this topic.
  
  I am currently working with Oracle database 10g XE with Apex 4.0 x.
  
  So here go us:
  
  I m trying to make application to the Apex where users will be able to download pictures and store them in a folder is desired on the server. I have red little son here and I found this.
  
  1. create FileBrowse point in Apex
  2. check the PLSQL processes that will take the images downloaded from WWV_FLOW_FILES and store them in custom table (allows to call IMAGES). After this step, we have our images stored in the table of the IMAGES on the server.
  3. now this is the confusing part, I want to be able, on the client side, see the list of folders already created on a server, or be able to specify the name of the folder and then call some PLSQL (or something else) to create this folder.
  4. after that, I saw that there are many ways to recreate the images and store them in the specific folder (created or specified in step 3 by customer) http://apex.oracle.com/pls/otn/f?p=31517:LOGIN:1753086653679135
  5. This is also part confusing: where should I create the main folder (the folder where all other records will be kept) so that I can access it using the application (purpose: image display)
  For example, when you create a Web page by using html, if I wanted to access some image files I would fix his way relative index.html.
  
  Lets say i m looking for the end do not code, I just want some advice in order to continue my research, or be able to understand this concept a little better because I m new to this.
  
  Thanks in advance.
  
  Published by: on January 24, 2012 910011 15:00

  With PL/SQL, you can create using UTL_FILE files, but not files.
  But using DBMS_SCHEDULER, you can run 'external' jobs... what could be a sort of "mkdir" command (see http://psoug.org/reference/dbms_scheduler.html)

  But think about it... I don't know that dbms_scheduler is available in XE...

  So something like the XFILES, using the built-in features XML - DB can be an elegant solution as well. You can even grant access to the XML - DB by using WebDav repository, it looks just like a folder on your network in windows Explorer.

  (Thanks for the plug XFILES, Mark)

• ORA-29541: class MW.oracle/support/mw/SupportRuntime cannot be resolved

  Setup Wizard Maintenance information
  
  Domain = cl.xxxxxx.com
  Oracle Home DB/d01/10201/oracle /
  Connection string = orcl
  Password = < not displayed > system
  The MW = database schema
  Maintenance Wizard Patch placement = / d01/10201/oracle/DB/eof/patches
  Email for anonymous FTP = [email protected]
  Protocol = http
  Port = 8080 HTTP
  Name of host HTTP Proxy = no proxy used
  Number of HTTP Proxy port = no proxy used
  My Oracle Support Username = [email protected]
  My Oracle Support = < not displayed > password
  Maintenance Wizard password = < not displayed >
  ***********************************************************************
  
  The values above are correct? Y (Y/N)
  Removing old schema Wizard Maintenance (MW)... Fact.
  Create a new schema in the Maintenance Wizard (MW)... Fact.
  Assistant Maintenance (MW) tool schema import... Fact.
  Compilation of the objects schema (MW) of the Maintenance Wizard... Fact.
  Check the status of ANONYMOUS account... Fact.
  Creating configuration files... Fact.
  Creating a DAD embedded PL/SQL gateway... Fact.
  Implementation of XML DB Repository... Fact.
  Creating XML DB Dir images... Fact.
  Creating XML DB Dir of folklore... Fact.
  Maintenance Assistant Java classes.../setup.sh loading: line 1093: /d01/10201/oracle/DB/eof/config/load_mw_java.sh: permission denied
  Fact.
  Creating portfolio for password encryption... Fact.
  Update the attributes declare...
  *
  ERROR on line 1:
  ORA-29541: class MW.oracle/support/mw/SupportRuntime cannot be resolved
  ORA-06512: at "MW. EOF_TOOLS', line 2750
  ORA-06512: at "MW. EOF_UTIL', line 171
  ORA-06512: at line 4 level
  
  Fact.
  Stopping listening process... Fact.
  From listening process... Fact.
  Checking the process of listening... Fact.
  Closing database orcl... Fact.
  From orcl database... Fact.
  Preparation to upload static content... Fact.
  Download of static content to images... Fact.
  Download of static content to folklore... Fact.
  
  To start the Maintenance Wizard configuration, go to the following URL
  http://xxxxxxxx:8080
  
  Web browsers supported are Internet Explorer 6.0 and Firefox 3.0 and liked
  
  Completed the installation Maintenance Wizard 2.18.
  
  
  Any idea what this may be?
  Thanks in advance

  The error

  ERROR on line 1:
  ORA-29541: class MW.oracle/support/mw/SupportRuntime cannot be resolved
  ORA-06512: at "MW. EOF_TOOLS', line 2750
  ORA-06512: at "MW. EOF_UTIL', line 171
  ORA-06512: at line 4 level

  is probably caused because /d01/10201/oracle/DB/eof/config/load_mw_java.sh failed: permission denied

  Based on this script, that I would like to check to see if sqlplus is executable from the same environment that you have run setup.sh.

  Before running setup.sh please be sure that your database environment is accessible using sqlplus under user MW.

  You could place a set - x at the top of the load_mw_java.sh so that we can see more production which does not run.

  Source language:

  # $Header: 1.06 load_mw_java.sh 2009-07-24 11:30 procedures ship $
  ## +=========================================================================+

  With the command set - x:

  # $Header: 1.06 load_mw_java.sh 2009-07-24 11:30 procedures ship $
  Set - x
  ## +=========================================================================+

• Registration function does not work

  Hi all!

  I have a problem with the LCC session recording feature - it works but only sometimes (average - 1 times of each 10 trials). I use the latest version of the SDK - Version 2.2.0 (November 10, 2011). I also tried Player 10.1 and 10.3 client API.

  I have a WebDAV repository that is registered with a server API - AccountManager.RegisterRepository (...), I also checked for if sure this deposit is saved with the method AccountManager.getRepositoryInfo () API - everything looks ok, the repository is stored and recalled by the server of the CCA.

  Then, I got a sample application record that was provided with the SDK (com.adobe.lccs\sampleApps\Recording\Recording.mxml) and my roomURL, the user name and the password - application seems to work as needed. I click the button Save to my request to save, uncheck the Save button, close the application, and then wait for a long period of time, but nothing is transferred to the storage of WebDAV in most cases... only sometimes it works and I have found no logical difference or model when it works.

  I also tried to start registration of server API - AccountManager.startRecording (...) - but it's also not working as expected. I have reviewed the code LCC and detected that this method should release the item in the following collection and node:

  RoomManager-> roomState-> recordingState. This method works well and the response of servers LCC is OK, but when I get information from the room with the AccountManager.getNodes(roomName, "/") API server I find no information XML returned.

  Either by the way, I checked the WebDAV server logs - there is only information on placing a file in storage servers of SUPPLY in case of success, not any error info without success to put files - so it seems that ACC has not even tried to download files of unsuccessful registration.

  Tips you can think of which could explain what could be wrong here? It seems there is an error on the side of the LCC - perhaps they forgot to update their API/sample files to something that works?

  I'm losing my mind trying to solve this problem, please help me!

  Thank you in advance!

  
  

  OK, can update you the startRecording method in lccs.cs to that?

  /**

  * Start to record a specified room

  *

  * @throws exception

  */

  ' Public Sub startRecording (the string, string archiveId, bool guestsAllowed)

  {

  Dictionary itemBody = new dictionary();

  itemBody.Add ("fullSession", true);

  itemBody.Add ("archiveID", archiveID);

  itemBody.Add ("guestsAllowed", guestsAllowed);

  Dictionary itemVO = new dictionary();

  itemVO.Add ("itemID", "recordingState");

  itemVO.Add ("body", itemBody);

  publishItem (room, "RoomManager", "roomState", itemVO);

  }

  This should solve your problems, and if it works I will integrate this in the SDK for the next version.

• Access denied. Permissions problem

  Hi all
  
  I get the dreaded "access denied. "There is error the file may not or there is a permissions problem.
  
  I am the administrator of my site, and we have implemented to use webdav. This error ONLY occurs when someone sends a page to another user for review. Therefore, the examiner is unable to publish the page. She just keeps giving this error.
  
  I tried to delete the folders _mm, locks, etc., but nothing works. Apart from that, I will soon have more than 500 people using Contribute to edit pages, so I won't be able to remove these files and locks all the time.
  
  Anyone has an idea why this might happen? All of my users belong to the same group (www), and everyone has the same permissions of read/write on the server.
  
  Thank you!

  EGAD! Do not remove the _mm folder!

  Make sure that your users have access read/change the _mm folder and the MMWIP folder at the root of the site. We had the same problem and does disappear. Temporary files are stored there when you perform a send for review.

• implementation of agent 11g ODI for multiple Master Repository

  I'm working on a project where I had to create several master repository in different schemas of Oracle database. Now I am trying to setup ODI agent. To do this, I need to change odiparams.bat by replacing the encoded password corresponding to a master repository.

  Problem is when I tried to change the odiparams I never saw any name from the master repository, I created. So, how can I setup in this case agent.

  Hi2782749 ,

  You will need to create a new folder for each agent. I think this post from Uli Bethke is always valid for all versions of 11g: from ODI: installation of several agents of the ODI on a single server. Sonra. Unlock the value of your data.

  Kind regards

  JeromeFr

• Master repository HPDM4.6 SP3 - problem

  Hello

  I have a problem with the implementation of master repository in HPDM 4.6 SP3 on Windows Server R2 2012.
  First I put basic information in the management of repository and I did a test that completed successfully (attachment #1).

  After awhile, I got an error of fixing #2.

  Then, I tried to view the contents of the master repository and I had a #3 fixing error.

  I tried to send two tasks to the test device - both failed ultimately (attachments #4 and #5).

  I think I checked everything starting from the turn of the firewall, open all ports, resettlement HPDM and install it on another machine.

  Any ideas how can I do Master repository works properly?

  Yes, as my co-woker mentioned above, your FTP repository has not been defined according to the configuration of your RCM.

  You must set the repository FTP at ftp: / / < IP > / HPDM based on the configuration of your RCM.

  Note: The 'Test' button will only check if the IP and port is available, which can mislead you when given the 'success '. We are looking to improve it in the next version.

• Design/implementation of Nexus 1000V

  Hi team,

  I have a premium partner who is an ATP on Data Center Unified Computing. He has posted this question, I hope you can help me to provide the resolution.

  I have questions about nexus 1KV design/implementation:

  -How to migrate virtual switches often to vswitch0 (in each ESX server has 3 vswitches and the VMS installation wizard will only migrate vswicht0)? for example, to other vswitchs with other vlan... Please tell me how...
  -With MUV (vmware update manager) can install modules of MEC in ESX servers? or install VEM manually on each ESX Server?
  -Assuming VUM install all modules of MEC, MEC (vib package) version is automatically compatible with the version of vmware are?
  -is the need to create port of PACKET-CONTROL groups in all THE esx servers before migrating to Nexus 1000? or only the VEM installation is enough?
  -According to the manual Cisco VSM can participate in VMOTION, but, how?... What is the recommendation? When the primary virtual machines are moving, the secondary VSM take control? This is the case with connectivity to all virtual machines?
  -When there are two clusters in a vmware vcenter, how to install/configure VSM?
  -For the concepts of high availability, which is the best choice of design of nexus? in view of the characteristics of vmware (FT, DRS, VMOTION, Cluster)
  -How to migrate port group existing Kernel to nexus iSCSI?... What are the steps? cisco manual "Migration from VMware to Cisco Nexus 1000V vSwitch" show how to generate the port profile, but
  How to create iSCSI target? (ip address, the username/password)... where it is defined?
  -Assuming that VEM licenses is not enough for all the ESX servers, ¿will happen to connectivity of your virtual machines on hosts without licenses VEM? can work with vmware vswitches?

  I have to install nexus 1000V in vmware with VDI plataform, with multiple ESX servers, with 3 vswitch on each ESX Server, with several machinne virtual running, two groups defined with active vmotion and DRS and the iSCSI storage Center

  I have several manuals Cisco on nexus, but I see special attention in our facilities, migration options is not a broad question, you you have 'success stories' or customers experiences of implementation with migration with nexus?

  Thank you in advance.

  Jojo Santos

  Cisco partner Helpline presales

  Thanks for the questions of Jojo, but this question of type 1000v is better for the Nexus 1000v forum:

  https://www.myciscocommunity.com/Community/products/nexus1000v

  Answers online.  I suggest you just go in a Guides began to acquire a solid understanding of database concepts & operations prior to deployment.

  jojsanto wrote:
  Hi Team,
  I have a premium partner who is an ATP on Data Center Unified Computing. He posted this question, hopefully you can help me provide resolution.
  I have questions about nexus 1KV design/implementation:
  -How migrate virtual switchs distint to vswitch0 (in each ESX server has 3 vswitches and the installation wizard of VMS only migrate vswicht0)?? for example others vswitchs with others vlan.. please tell me how...
  [Robert] After your initial installation you can easily migrate all VMs within the same vSwitch Port Group at the same time using the Network Migration Wizard.  Simply go to Home - Inventory - Networking, right click on the 1000v DVS and select "Migrate Virtual Machine Networking..."   Follow the wizard to select your Source (vSwitch Port Groups) & Destination DVS Port Profiles
  -With VUM (vmware update manager) is possible install VEM modules in ESX Servers ??? or must install VEM manually in each ESX Server?
  [Robert] As per the Getting Started & Installation guides, you can use either VUM or manual installation method for VEM software install.
  http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/getting_started/configuration/guide/n1000v_gsg.html
  -Supposing of VUM install all VEM modules, the VEM version (vib package) is automatically compatible with build existen vmware version?
  [Robert] Yes.  Assuming VMware has added all the latest VEM software to their online repository, VUM will be able to pull down & install the correct one automatically.
  
  
  -is need to create PACKET-MANAGEMENT-CONTROL port groups in ALL esx servers before to migrate to Nexus 1000? or only VEM installation is enough???
  [Robert] If you're planning on keeping the 1000v VSM on vSwitches (rather than migrating itself to the 1000v) then you'll need the Control/Mgmt/Packet port groups on each host you ever plan on running/hosting the VSM on.  If you create the VSM port group on the 1000v DVS, then they will automatically exist on all hosts that are part of the DVS.
  -According to the Cisco manuals VSM can participate in VMOTION, but, how? .. what is the recommendation?..when the primary VMS is moving, the secondary VSM take control?? that occurs with connectivity in all virtual machines?
  [Robert] Since a VMotion does not really impact connectivity for a significant amount of time, the VSM can be easily VMotioned around even if its a single Standalone deployment.  Just like you can vMotion vCenter (which manages the actual task) you can also Vmotion a standalone or redundant VSM without problems.  No special considerations here other than usual VMotion pre-reqs.
  -When there two clusters in one vmware vcenter, how must install/configure VSM?
  [Robert] No different.  The only consideration that changes "how" you install a VSM is a vCenter with multiple DanaCenters. VEM hosts can only connect to a VSM that reside within the same DC.  Different clusters are not a problem.
  -For High Availability concepts, wich is the best choices of design of nexus? considering vmware features (FT,DRS, VMOTION, Cluster)
  [Robert] There are multiple "Best Practice" designs which discuss this in great detail.  I've attached a draft doc one on this thread. A public one will be available in the coming month. Some points to consider is that you do not need FT.  FT is still maturing, and since you can deploy redundany VSMs at no additional cost, there's no need for it.  For DRS you'll want to create a DRS Rule to avoid ever hosting the Primar & Secondary VSM on the same host.
  -How to migrate existent Kernel iSCSI port group to nexus? .. what are the steps? in cisco manual"Migration from VMware vSwitch to Cisco Nexus 1000V" show how to generate the port-profile, but
  
      how to create the iSCSI target? (ip address, user/password) ..where is it defined?
  [Robert] You can migrate any VMKernel port from vCenter by selecting a host, go to the Networking Configuration - DVS and select Manage Virtual Adapters - Migrate Existing Virtual Adapter. Then follow the wizard.  Before you do so, create the corresponding vEth Port Profile on your 1000v, assign appropriate VLAN etc.  All VMKernel IPs are set within vCenter, 1000v is Layer 2 only, we don't assign Layer 3 addresses to virtual ports (other than Mgmt).  All the rest of the iSCSI configuration is done via vCenter - Storage Adapters as usual (for Targets, CHAP Authentication etc)
  -Supposing of the licences of VEM is not enough for all ESX servers,, ¿will happen to the connectivity of your virtual machines in hosts without VEM licences? ¿can operate with vmware vswitches?
  [Robert] When a VEM comes online with the DVS, if there are not enough available licensses to license EVERY socket, the VEM will show as unlicensed.  Without a license, the virtual ports will not come up.  You should closely watch your licenses using the "show license usage" and "show license usage " for detailed allocation information.  At any time a VEM can still utilize a vSwitch - with or without 1000v licenses, assuming you still have adapters attached to the vSwitches as uplinks.
  I must install nexus 1000V in vmware plataform with VDI, with severals Servers ESX, with 3 vswitch on each ESX Server, with severals virtual machinne running, two clusters defined with vmotion and DRS active and central storage with iSCSI
  I have severals cisco manuals about nexus, but i see special focus in installations topics, the options for migrations is not extensive item, ¿do you have "success stories" or customers experiences of implementation with migrations with nexus?
  [Robert] Have a good look around the Nexus 1000v community Forum.   Lots of stories and information you may find helpful.
  Good luck!