Setup backup

Similar Questions

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm

• Windows XP, disk hard imminent failure, can I select continue or setup to start the backup

  At the bottom of the page that says "imminent hard drive failure", it asks if you want to continue, or the installer.  Which is better to back up the hard drive?

  If the options "setup" means that you know what you are about to install Windows, stop.

  I take the hunt, put it in an external enclosure and save it by connecting to another machine.

  If you have a Western Digital hard drive, you can get a 'special' version of Acronis True Image WD's (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  XXClone

• Setup ESXi backup problems

  I use vCLI to perform the backup of host ESXi on my Windows 7 PC. I use the following command:

  "c:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vicfg - cfgbackup.pl - Server".
  "10.8.7.73 s c:\temp.

  And get the following error:

  Configuring backup of the firmware in c:\temp...
  GET https://10.8.7.73/downloads/configBundle-xyx.net.tgz expired
  successful: 500 unable to write in "c:\temp": den PermissionEEI

  Please tell us which account needs to access my folder C:\temp.

  
  

  If I am not mistaken the command expects a backup file rather than a backup as the target directory. Try:

  "C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vicfg - cfgbackup.pl - Server 10.8.7.73 s c:\temp\ESXi-Backup.bak.

  André

• How to Setup Data Guard with alter tablespace... begin backup approach

  Hello!
  
  I am writing this compilation of documents in a guard daata establishing in 10g. I was in charge to present different approaches in implementing on Rhel 5.
  
  I came across 3 procedures (which is to duplicate a database with RMAN, then configure it to a Data Guard feature). I read a process using (let's this is what the article said, but procedure was presented):
  
  alter tablespace... .begin backup;
  alter tablespace... .end backup;
  
  then copy the generated files and configure it to the data protection feature.
  
  Someone help it with that? Is there like a blogsite or steps I can take for this scenario?

  Hello;

  The best I found was: (and its same 10 Oracle! and not RMAN.)

  http://sites.Google.com/site/catchdba/physical-standby-database-using-HOTBackup

  There, an old link here on this topic:

  DataGuard configuration using hot backup files

  Hard to find much on this topic as "Hot Backup" almost always comes to RMAN.

  This collection of notes can also help:

  DataGuard knowledge browser Product Page [ID 267955.1]

  And the "Formidable" Powerpoint:

  www.dbspecialists.com/files/presentations/standbydb.ppt

  Seems that this method is dead somewhere between Oracle 8 and Oracle 9

  Best regards

  mseberg

  Published by: mseberg on March 16, 2012 20:31

• keep windows closed, unable to backup or recovery. message: the computer restarted unexpectedly or encountered an unexpected reeor. Windows Setup cannot continue. to install windows,...

  my HP vista sys cannot repair or recovery. I tried to reformat the harddriver still does not. Please advice.

  Thank you

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

• Setup various AE advise

  I have problems to get the maximum speed. My ISP is 150 MB and I have this Setup:

  Airport Extreme (6th generation) placed in the living room connected to the Ethernet modem (modem is bridged, no router). When I connect this way, it gives me 130-150 MB, which is fine.

  However, when I connect these devices all starts to vary:

  1. an other Airport Extreme (6th generation) is connected to the hand on. Expansion of the network. When I try to change the option expand Network turn off this airport restarts but never succeeds and gives me an error. The only thing I can do is add then reset again and then I can only use the extension of the network. This normally works very well but do not know what it might cause the heavy fall.

  On this second AE Ethernet port I have attached a Synology NAS with my music, and so on

  2. an Airport Express (A1392 3rd gen) that I now set to join the network to see if things would improve. This one I use for music and it has a smart thermostat bridge (Tado) plugged into the Ethernet port

  3. an Airport Express (A1392 3rd gen) which I used to use to expand the wireless network but have disabled now I read that the extension of the network makes the slower WIFI and I'm afraid the Express slows down the extreme speed AC but not sure about that.

  4. a Time Capsule from Apple (4th gen) which I use for backup. I disabled the connection here as I believe join or extend the network would be to ask questions. I have attached a few devices through Ethernet at the back of the TC.

  The various airports are in different places in my house but not more then 10 meters (30 feet) on the other.

  That Setup would you recommend in order to get the best speed in different places?

  Thanks for the help!

  1. an other Airport Extreme (6th generation) is connected to the hand on. Expansion of the network.

  If you extend the network using a wireless connection between base stations, it will be the first performance issue you will encounter. It would be preferable to extend it using a wired connection between base stations. This is known as a roaming network configuration.

  2. an Airport Express (A1392 3rd gen) that I now set to join the network to see if things would improve. This one I use for music and it has a smart thermostat bridge (Tado) plugged into the Ethernet port

  In this configuration the AirPort Express performs like any other client wireless on your Wi - Fi network. He also performed an Ethernet bridge wireless for the Tado. It does not perform routing functions, or it extends the network. In addition, please note that the A1392 is a base station 2nd generation 802.11n. There is no 3rd generation... yet.

  3. an Airport Express (A1392 3rd gen) which I used to use to expand the wireless network but have disabled now I read that the extension of the network makes the slower WIFI and I'm afraid the Express slows down the extreme speed AC but not sure about that.

  Yes, what you read is correct. Again, you can reduce the amount of the penalty to performance of a network using a network of itinerant type instead. This requires not all base stations to be connected by Ethernet.

  4. a Time Capsule from Apple (4th gen) which I use for backup. I disabled the connection here as I believe join or extend the network would be to ask questions. I have attached a few devices through Ethernet at the back of the TC.

  How this time Capsule is connected? Wired or wireless and other base stations? For the record, it cannot be configured to 'join the AirPort Express wireless network'.

  The implementation of recommendation would be a roaming network.

• the iTunes Setup program finishes, but the application does not appear

  For starters, I'm on Windows, but it seems that the system is not the problem because it's happened before, with my Macbook Air.

  I download iTunes on Apple's site and Setup will run as usual and finishes. But iTunes never displayed in Program Files, the destination he was supposed to have downloaded. I opened the Task Manager and tried to manually run the program yourself by using 'itunes.exe', but he writes that the application does not exist.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I have a new backup disk (a disk of 5 TB of Seagate) and need help setting up with CCC!

  Hello world

  I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC.

  I did in the past without problem, but I want to assure you of a few things:

  1. This particular drive has software available in a folder on the disk backup (w / the PC and Mac versions). But... I intend to use this disk as an exact copy of my iMac HD; It must also be bootable.
  2. Should I format the drive with disk utility? Or load the software to the CCC on the disk and just leave their only backup software?
  3. One last question: I also have a MacBook Air, an iPad and an iPhone. I want to save them as well. Should I put them on separate partitions, I created? Or can we just one big happy family? The last is best.

  One last piece of information: two computers, etc, were all backed up via Time Machine. My data the most important, photos, etc., are also saved on deposit box and/or iCloud on a regular basis.

  Thanks for any suggestions or comments!

  Sally D.

  Delete and partition the drive by making a separate partition for each computer. The iPad and the iPhone is useless their own partition because they back up using iTunes and would appear in the clone of the computer that you use for each save. Each partition must be the size of the current cloned drive that can leave you with additional partitions for other stuff. Then format the drive Mac OS Extended journaled. Do not install any software that came with the drive, none of this is necessary.

  I use a very similar setup with a 3 TB drive. I clone my boot SSD in a single partition, my drive internal 1 Tb in a second, my Macbook to a third party, and I have a fourth partition which is currently empty, because I haven't decided what to do with it yet. I also have a 3 to Apple Time Capsule.

• Disable WiFi on TC and used as a backup only

  I have a Time Capsule that I want to disable the functionality of WiFi Access Point and JUST keep the Capsule as the backup drive.

  I bought a new router that is not Apple Time Capsule, and I really don't want to have WiFi on the TC, and I want to be able to still use it to back up my data on my Mac Mini and Mac Book Pro. How to achieve this?

  Please notify.

  Thank you.

  You should be able to have the configuration of TC bridge (Network Tab... Choose the option above, router: Off (bridge mode).

  

  The TC is still available on the network.

  However Apple pointed out that it may be difficult if the computer is not directly connected to the TC in wireless or ethernet.

  My advice is to test as above... If you find after a day or two, the TC drop off the network, you will need to use a different approach.

  Either use the TC as a switch... If the iMac in particular can connect through it in ethernet... but if your Setup is wireless, it becomes complicated.

• Search for Time Machine backups for email

  I need to get my backup files for a particular email. This backup is on an external hard drive but not in active service at the moment but plugged on my system for purposes of trying to locate this email and the ability to retrieve other emails stored with the hope of adding them in my active files.

  My current setup of the system is: internal HD: operating system and active storage, (OS X 10.8.5

  3 t external HD: Active™ backup,.

  4 t external HD: archive™ backups.

  Because I'm not sure how Mail stores the emails, I don't know what file (s) to search the Archives of Time Machine or if there is some way I can use the Time Machine application to access this file.

  Is it possible to access these archived files?

  Please, do not settle everything about upgrading to El Capitan.

  Sparkgapper

  If I need to restore a mail via Time Machine,

  I opened the Mail,

  go to the folder where I kept the email-

  Then enter the Time Machine and scroll down to date.

  Contents of this file is displayed at the top of my window.

  Then I click on restore (the element or folder)

• New facility for the Mavericks and Apps and recover backup from Time Machine?

  I 10.9.5 and backup on the time Machine: the system is slow and I would setup Mavericks and Apps from scratch.

  I downloaded the installation from the App Store, and I'll do a USB bootable pen.

  My problem is the following:

  "I have maybe picked up documents, Photos, movies, and the library of the backup in the Time Machine by automatic iTunes method or I have to do it manually?"

  Thank you much for the help

  Gricolomb

  When installation wizard runs after installation, if you are recovering your user, who must recover what you listed provided they are in the user photos, music and movies files.

• Backup from Time Machine not recognized

  Hello. I have a mid-2011 21 "iMac 2.8 GHz i7 with 16 GB of RAM, running 10.11.4, El Capitan. My old 1 TB HDD (HARD drive) was giving me problems (grinding and draw and he had considerably slowed down), so I backed up the computer with Time Machine (which I did for years), and I bought a 1 GB SSD from OWC replacement kit. I installed it in the hard drive, location in my iMac, reinstalled the operating system, and the new drive is running great. No problems with it.

  The drive Time Machine is a disk HARD Seagate 2 TB external drive connected by USB to the computer.

  So, my next step is to transfer the old news of Time Machine in the new drive. I tried first Assistant Setup in recovery mode, but the Machine of the time in the car was not found (recognized). When I started normally, the drive of the Time Machine is visible on my desktop, and backup files appear in there.

  So, then, I ran on the drive disk utility. I could not launch 'repair' the disk as a whole (the button is dimmed when I click on the disc), but I fix the partition on the disk. No not found errors.

  Then I went in the Migration Wizard to move the files. But I had the same problem as before - Migration Wizard does not see the Time Machine drive.

  So. I tried to enter Time Machine 'Star Wars' show on the computer and dated backups appear on the right side of the screen, but then, when I go to look at, it does not appear that there is something in them.

  I kept the old drive HARD and (in panic), I ordered a box to put the old drive, and I'll try to get the files this way. But, I still want to use the files on my Time Machine drive.

  At this point, the only thing I have to save my documents, my pictures and family videos and music. If only I could get in the 'Home' on my Time Machine backup folder by clicking on the player, I will manually install the files 'Desktop', 'Documents', 'Movies', 'Music' and 'pictures '. I don't know if this is possible, and I have never done this. I don't like not everything 'Applications', or anything else, so I'm willing to do the grunt work on those reinstall the old way. Can manually install you the items in the folder to the home page of Time Machine in another drive?

  Any advice you can give literally will save me! I'm kinda at a loss on what to do. The last time I used Time Machine to do this (to transfer the files on the iMac 2011) it worked like a charm.

  Thank you! Clay

  See if it's of any help. Section E

  http://pondini.org/TM/troubleshooting.html

  https://discussions.Apple.com/docs/doc-10081

• Migrate to the new iMAC opportunity backup.

  You just bought a refurbished iMAC running OSX 10.6. My current iMAC runs OS x 10.7. I want to migrate my existing system to an external backup drive. The 10.6 will automatically replace the new 10.7?

  If you are migrating using Setup Assistant, it will keep the intact operating system on the new Mac and only migrating applications and data.

• How to migrate data with the Mavericks (MacBook) Setup Wizard to El capitan (MacBookPro)

  Hello

  A few days ago, I bought a refurbished MacBook Pro (El Capitan) and intended to migrate the data from my old MacBook (Mavericks) backup via Time Machine. Annoyingly, the migration wizard does not recognize the HD. He's looking for and search, the wheel turns and turns...

  Research on the web it seems to be a common problem. I also read that you can also use the Setup Wizard to migrate all data and programs? Can someone help me with this and tell me how to do? Thanks in advance!

  Yes, the Setup Wizard is the way to go. But you have to use the first time you start your new Mac. So, if you have not done too tight on the new, re - format the hard drive and use the Migration Wizard when you are prompted.

  Move your content to a new Mac - Apple Support