Implementation of an area of text similar to the text field (Disabled)

Similar Questions

• Muse of the synchronized text fields disabled during the download of 3rd party hosting

  The customer site is done in the office and in a version of the phone. The text field for the menu of the day, which he is editing with the 'inbrowserediting.com' function is implemented as a synchronized text. Great, but it does not work! I assumed that it is has something to do with PHP, then I changed hosting and now all these features (also the supplier confirmed it).

  But once again: it does not work.

  After downloading by ftp to a third host, I get the message, that muse disabled the inbrowser function because it seems the host does not support redirection of Web sites.

  -> and then... the text synchronized the ist field cannot be changed.

  I contacted the supplier and that he thinks that all actions are enabled and it should work

  The question now is:

  Which confirms exactly MUSE during the download? are there other technical bases that must be met? I can't find something. No description about this article.
  

  Y at - it ideas? Thanks in advance!

  I found the solution in this discussion (which I have not found before... Sorry ;-).

  Re: Why I can't use in browser with synchronized text editing?

  Thanks anyway!

• Titles in the menu bar are small and blurry as well as all the text fields are reduced in Photoshop

  As you can see by the picture below, my menu bar titles at the top are small and blurry, most anywhere there is an area of text field (i.e. length & width text fields in the window in the size of the Image) she is collapsed vertically and so I don't see what are my values.  You can also see that the 3 boxes check mark at the bottom of the window the size of the Image are cut.  I have CS6 installed on a Windows XP computer without any problem.  Now that I "upgraded" to Windows 7, this is what I get results after installation.

  

  Straighten out your system fonts. All menu entries and pallets using the police hurt eitehr because you deleted the right a (trebuchet, Verdana), he is blocked or has another problem. Also update your graphics driver.

  Mylenium

• Enter the text for the form field and do to repeat in the following pages

  Hi - I'm working on an interactive form of 14 pages. There are two text fields that must appear on the bottom of each page.

  Anyone know if it is possible for the user to these fields in competition once and while the text automatically repeat on the following pages?

  I create the form in InDesign CS6 (I CC, but it runs like a turtle).

  Any help much appreciated! Thank you.

  Form fields with the same name will have the same value, so just name them

  Similarly.

  Duplicate a field on several pages is easily achievable in Acrobat, by the way.

  There is a built-in function that allows you to do when you right click on a shape

  in form editing mode.

• LiveCycle - police car in the text field

  I use 8 Professional - Livecycle and I have several areas of text field. I want to make the police in 'auto' text fields where they are trying to set within the area. I have trouble finding in via Livecycle. I can find it on my Adobe regular but not Livecycle. Help, please!

  Thank you

  I was able to understand. I just need to change the font to zero size.

  Thanks for your help.

• Radio - text field - radio button

  How associate you two radio buttons to work together when you need to have the text in the middle of the radio buttons? (below the first radio button there are two text fields)

  It's a fluid subform and everytime I try to "Pack in the new group of radio buttons", it moves the text fields below two boxes.

  • radio button

  text field for the text field

  • radio button

  Hello

  use a subform set, where you can also your radio buttons and textfields manually and put this subform in you flowed subform.

• Autopopulate data text field in another text field?

  Hello

  I have two areas of text field entered my livecycle form, and I want to ensure that if an employee put their name in a text field, the 2nd text field will be automatically filled itself with the same name.

  I know how to do this in Acrobat (just copy/paste the text current field box, and make sure that it has the same name), but the method I use in Acrobat does not work in livecycle.

  Any ideas?

  Hi, the easiest way without scripting is to appoint the two fields with the same name, EG empName. Will LC designer inserts the instance numbers in the hierarchy, as empName [0] and empName [1]. Select one of the textfields and go to object > linking the palette and select global link. Everything that is typed into a field will automatically appear in the other, at the exit. Niall

• Text field Forms 10 g (which doubles as a text editor) is text to be truncated.

  I have 2000 text field of characters on a form 10g which is one called 'comments '.
  You can enter in the field
  Or click the button next to the field and who calls EDIT_TEXTITEM forms;
  And opens the field as a text editor.
  
  GO_ITEM ('inventory_coding.COMMENTS');
  EDIT_TEXTITEM;
  
  The problem is:
  When we went to forms on the web application server 10g,
  The area is truncating the text background,
  And the text is remarkably low sitting on the ground,
  At the top of the text in the middle of the field.
  
  The field shows the first 30 characters of the top line of all that is in the editor.
  (the text in the Editor seems fine)
  
  Comment fields properties are:
  * police = Ariel 8 in the comment field is the same as other fields on the screen (ariel 8)
  If you increase the size of the font to ariel 8 to 10, the truncation increases.
  If you go the next police, ariel 7, it also truncates.
  * This is the same hauteur.188 as the rest of the fields on the form.
  * Page/justify was initially start and tried to justify in left and Center, both of truncation.
  * Multiline = yes
  * Wrapstyle = Word
  * I checked all the properties of the field coment and his call button.
  and I tried to change each property with no improvement.
  
  My goal is to decrease the space above the text in the comments field.
  Any ideas how can I manipulate the text in the field?
  Any suggestion is appreciated!
  
  Published by: Doug_Galayda on September 1, 2009 09:00

  The recangle is the newline character that is displayed if "Multiline" is set to no.

  Could you build a simple testform with a single item with multiple lines, assign Yes to?

• Are there any programs that work similar to the old Adobe Pagemaker?

  Are there any programs that work similar to the old Adobe Pagemaker?

  Aldus Pagemaker, later Adobe Pagemaker were abandoned 12 years ago and since some of it is functionally distributed and shared between Adobe Illustrator and Adobe InDesign.

  If you are looking for something similar, Illustrator and InDesign will be the direct dead unless you have a copy of PageMaker running on an older operating system that supports

  After your choices narrow down to a few suggestions here

  http://www.MakeUseOf.com/tag/free-alternatives-Photoshop-Illustrator-Lightroom/

  and if you are looking for something more 'professional' look in the affinity Designer

  https://affinity.serif.com/en-GB/Designer/

  or QuarkXPress

• No backgrounds, text fields, text, borders areas. All-black text, all the blue links. No style sheet or put in the form of page layout

  No backgrounds, text fields, text, borders areas. All-black text, all the blue links. Any stylesheet or layout on all internet pages of setting shaped. Just randomly. I uninstalled, rebooted, re installed. Nothing solves this problem.

  This problem has been fixed by uninstalling Google Earth for some reason any it messes up Firefox when I install it.

• Too small police in the area of text and some programs in vista

  I can't read the text in the box on the page internet IE and firefox as well as some programs in my computer. I have not found the solution for this problem on the internet, including using microsoft and response. Please don't suggest me IE uncheck options - move - visual blah blah or press on CTR and scrolling up, none of them are working. I think the problem in windows vista, but I can't find, wht caused.

  Hello

  I solved the problem which the police is causing the problem, you must reinstall the fonts.

  Type fonts in the search box when the police all pop-up left click in the empty spot of the fonts page, you will see install it new font. After this action if bad things police to install probably its Times new Roman, or I prefer you install all. Your problem will disappear that text in the text box will be not small.

• Labels are centered, but the text fields are not

  I can't seem to convince a RichTextField is centered on the screen.  This is a limitation of this particular area, or I am doing something stupid?  Copy the following code illustrates the problem:

  package com.rim.samples.hello;
  
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.component.RichTextField;
  import net.rim.device.api.ui.container.HorizontalFieldManager;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  
  final class HelloScreen extends MainScreen {
      public HelloScreen () {
          super();
  
          // The title is centered
          LabelField title = new LabelField("Test Field Attributes",
                  LabelField.ELLIPSIS | LabelField.USE_ALL_WIDTH | LabelField.HCENTER
                  | LabelField.VCENTER);
          setTitle (title);
  
          // A simple label added to the main screen is centered
          add (new LabelField("Yay! I'm centered!", LabelField.FIELD_HCENTER));
  
          // But a rich text field refuses to center
          add (new RichTextField("Boohoo, I'm not!", RichTextField.FIELD_HCENTER));
  
          add (new LabelField("Labels rock!", LabelField.FIELD_HCENTER));
  
          // The vertical field manager makes no difference
          VerticalFieldManager v = new VerticalFieldManager(VerticalFieldManager.FIELD_HCENTER);
          v.add (new RichTextField("field managers don't help :(", RichTextField.FIELD_HCENTER));
          v.add (new LabelField("VFM Labels work!", LabelField.FIELD_HCENTER));
          add(v);
  
      }
  }
  

  I tried FIELD_RIGHT but when HCENTER does not, nor does RIGHT.  I guess I can use a tag instead, but I was really hoping to use a centered text edit field.  Any ideas?  Thank you

  Blister

  The default behavior of RichTextField should use the full width. Try adding the RichTextField.USE_TEXT_WIDTH style

• How can I add white space between areas that contain text fields? I use Adobe Acrobat Pro DC 2015.  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these text fields to be developed and not

  How can I add white space between areas that contain text fields?

  I use Adobe Acrobat Pro DC 2015.

  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these areas to be developed and do not overlap the text and the text below fields.

  For example:

  1. 1.

  Progress/strategies:

  1. 2.

  Progress/strategies:

  1. 3.

  Progress/strategies:

  1. 4.

  Progress/strategies:

  The space between each 'progress/strategies' increasing needs. A text field is under each of them. If it's a Word doc, I could just press on enter. What is the best way to do this with Adobe Acrobat Pro DC?

  There is no easy way to do it. You need to move the text fields more apart and if there are static elements, then you will need to use the tool edit text & Images to move them, separately.

• AREA of TEXT of APEX auto suggestion

  Hello

  I am new to ORACLE APEX, I work on request, where I created the AREA of TEXT by using the wizard. Now, I want to enter the data. But the data must be entered semi-automatic. As we get in the e-mail address box.

  The data must be retrieved from the database column and once I selected this necessary line, it should end with "semicolon (;)" and enter the following value

  It's a way to do it?

  Thank you

  NP

  UPDATE:

  For example, the behavior of the text box should be as below;

  Post edited by: 2913566

  Hello

  Your code is logically correct, but you just need to add a line.

  I write code with some changes.

  1. DECLARE
  2. l_vc_arr2 APEX_APPLICATION_GLOBAL. VC_ARR2;
  3. BEGIN
  4. l_vc_arr2: = APEX_UTIL. STRING_TO_TABLE(:P1_TEXTAREA);
  5. FOR z IN 1.l_vc_arr2.count LOOP
  6. HTP.p (l_vc_arr2 (z));
  7. Insert into t1 (empno, ename,) values (l_vc_arr2 (z),: P1_USER);
  8. END LOOP;
  9. END;
  10. /

  Try this, it should work.

  Concerning

• Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro

  Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro (end 2013)

  Thanks for the update.

  Go to the Photoshop preferences > 3D > check whether it shows VRAM than 3072 MB

  Look for the system updates and see if there are updates waiting for your graphics card drivers.

  And make sure that the document you are opening is in RGB and CMYK mode not.