implementation of vcenter as VM / hosted on remote sql server 2005 database

Similar Questions

• Failed to connect to remote sql server 2005

  It has problem connecting to remote sql server 2005 on the LAN (windows xp/windows 7). I had put firewall settings as don't port no 1433 for TCP/IP and everything, but does not connect with the computer on the local network

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• string attribute connection not valid on SQL Server 2005 systems remote simulateously

  We run MS - SQL Server 2005 on a Dell server with Windows Server 2008 and with remote systems with XP.

  Frequently on remote systems, in error - no valid Attribte of chain of connection, then you connect the re, ote system this work about half an hour. Once again the above error obtaining.

  How to solve this error...

  Please give advice

  Hey Abdul Vahab,.

  Please join the audience of IT professionals in the Microsoft TechNet forums for assistance. The SQL in TechNet community can be found here:
  TechNet - Microsoft SQL Server - SQL Server forums

• VirtualCenter Server DBs on remote SQL Server

  Guys,

  I use VirtualCenter Server with a remote server of SQL2005 DB.  I initially set up with a domain account as the owner of the db and everything was pretty much ok, except that my VirtualCenter management Services continues to stop.  I was told that the best practice is to use local sql accounts and authentication as opposed to domain accounts.  I created connections local SQL, makes them owners of DB and then recreated the system DSN names on my server of VC.  I changed the log on credentials for the VC and VC management Web services for my domain account for the Local System account.  Now when I start the service I get the "Virtualcenter Server service stopped with the error service special 2 (0x2).»  I have cheked other messages and I made sure the Vmware converter service does not work.  IIS in is not installed on this server.  I saw the messages about failure fo the local system account to log on to a remote sql server.

  So my question is:

  If the VCDB abd UMDBs are on another SQL Server on the VC server do you need authentication based on the domain or local sql?  What references do service accounts must be defined on the VC Server?

  Thank you

  If VC and SQL reside on a single box, a domain account is recommended. If SQL is remote, it is recommended the SQL authentication, see Installation and Configuration Guide. This has always worked for me.

  As mentioned previously, VC must be installed with local administrator or service account (member of local administrators) and retain the same all along of...

  Thank you

  Ramesh. Giacalone,

  VCP 3 & 4, MCTS(Hyper-V).

  Please give points, so useful

• SQL Server 2005 STD. best practice for deploying VCenter 4

  Hi all

  I I know what kind of criteria from database / best practices that I need to create to support VCenter Management Server v4?

  I use Windows Server 2003 standard and SQL Server 2005 SP3 Standard edition.

  Thank you.

  Kind regards

  AWT

  Maybe this can help you.

  MCP, VCP

• Remote SQL Server in WAN environment

  Hi guys,.

  As I read the reference guide questions are poping up.

  If I have a SQL Server remote acting as SQL Server my vc instance which is the best way to implement in a WAN environment with vCenter Heartbeat?

  Thank you

  Dougie

  Process is the same as if you protected vcenter via a WAN with heartbeat.  If you have a different IP address for primary/secondary, then you use the WAN option and provide IP addresses as required during installation.  The only difference is that you select SQL at the primary and secondary installation wizard.

  vExpert

  VMware communities moderator

  vmwise.com / @vmwise

  -KjB

• Toolkit and remote sql server DB

  I have an application that creates a table and inserts the table entries (~ 15 fields of strings and numbers), it works properly when you speak to a local sql server express labview and the db toolkit.  I connect with a udl on windows7 64-bit file.  I am now trying to connect to a database on the network, I got the udl file to work and connect very well but my query failed (probably created the table) the error code has not been defined.  Anyone have any suggestions on debugging.  I guess that sql server and express to take the same thing, it could be a permissions or timeout?

  If I had to guess, I suppose that the connection didn't correct permissions on the remote DB, although I expect that you would get a recognizable mistake with this. This should be relatively easy to find by logging into the remote DB with this connection using another program (for example, access or Management Studio) and performs the same operations.

  Even if the error code appears as not defined, you can try to search online and see if other people fell on it. Be aware that some error codes are shared by different applications, so be sure that you look good results.

  It would also be useful to know exactly where the error is generated, which should help you more to find the pattern.

• Comparing the data set of Oracle database local to the Remote SQL Server database

  Hello

  I have a table in an Oracle database that is gradually being updated with a table in SQL server through the database link. There is a field "Date of creation" in the table in SQL server that I used to find the newly created records and shoot and insert them into the local table to the Oracle database.

  Now the question is the documents/data in the SQL server remote can be deleted as well and I see a lot of files are already deleted and I couldn't find a way to capture the information of deleted data to remove from my local table.

  I tried

  SELECT id local_table

  where there is no

  (select * (or 1))

  of remote_table@database_link

  where remote_table.id = local_table.id).

  And I tried to replace not exist with no so.

  The problem is that the query is too slow with link of database for IN/NOT EXISTS clause NO. So, I'm trying to find an effective way to capture the lines deleted in the remote to remove as a result of my local table table.

  Any help is appreciated.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit

  Thank you

  Chrystelle

  It is perhaps easier

  Select pk / * or sustitutive key * / from Oracle.tba

  less

  Select pk / * or sustitutive key * / from SQLSERVER.tab

  This returns the rows that exist in Oracle but not in SQL SERVER-> delteted lines in SQL Server.

  Another way is to create a trigger to remove in sqlserver and track in a table delete lines.

  HTH - Antonio NAVARRO

  http://SQL1.WordPress.com/

• Migration of Vcenter DB from SQL SERVER 2005 to SQL 2008 Express

  Hello
  I'll migrate the physical vcenter server to a virtual machine, then I'll install a new VM with OS 2008R2 and SQL2008. But I need the migration plan
  vCenter DB from SQL 2005 to SQL2008. VMware also recommends

  Note: 1) VMware recommends now IP address and host name the same information to facilitate the migration.

  (2) software migration to different vCenter Server, Manager of update or VMware Orchestrator. For example, Site Recovery Manager is not migrated.

  (3) move the VMware Orchestrator database. You must do it manually.

  We can give to vcenter server new name and IP and if yes what will be then problem occur after the post migration.

  Thank you

  vmguy

  It takes to keep the same name and IP address? If we will give different vcenter and IP server name then how will transfer of post stage

  If you can keep the same name of host and IP, this would make it so much easier.  That said, if you need to change the host name and IP address of vCenter you can run into issues where all your guests appear as disconnected. Usually, you can right click and choose 'connect', asked credentials for your hosts of ESXi, but after that they should remain connected.

  In addition, just in case I posted above another KB.

• SQL Server edition full for vCenter Server 6.0

  Hello

  Just learn that vCenter 6.0 does not support SQL Server Express.

  We intend to use SQL Server 2008R2 as the database of vCenter Server 6.

  We would like to ask for your opinion if we should use the full 32-bit or 64-bit SQL Server Edition?  For SQL Server Express, 64 - Bit is used, I think that we need to use 64 bits one, is this correct?

  Your opinion is requested.

  Just learn that vCenter 6.0 does not support SQL Server Express.

  The Windows 6.0 vCenter dropped the integrated SQL Express, BUT instead, it comes with a SQL database vPostgres shipped to replace it with similar restrictions. You don't need to install your own SQL server if you're ok with these limits. See the following article:

  vSphere 6 - clarify misinformation. VMware vSphere Blog - VMware Blogs

  Databases are supported for installing windows SQL 2008 R2, 2012 and 2014, Oracle 11g and 12 c as well as the possibility of using an embedded database vPostgres on windows vPostgres is limited to 20 guests and 200 VMs. Upgrades where SQL express is installed will be converted to vPostgres. The vCenter Server Appliance supports the vPostgres shipped to full scale, the host of 1000 and 10,000 virtual computers and is the database recommended for vCenter server unit. Oracle 11g and c 12 external databases are also supported for this version, look for these to drop in the future releases.

  It is also possible to keep an existing SQL Express DB when you perform an upgrade:

  VMware KB: Upgrade vCenter Server 6.0 without migration of the SQL database to vPostgres

  If you use your own SQL server to go with a 64-bit version and stick them on products VMware interoperability Matrices.

• Remote access to SQL server

  Hello, all.

  It is the first time I've ever needed to access a remote SQL Server, and I get an error in the validation attribute of the cfquery tag.

  The CFQUERY tag opens currently as:

  "< name cfquery ="[Nomrequete]"debug ="1"username =" "#User #" password = "#Pass #" dbserver = dbname "[IP Address of the SQL Server]" = "[DatabaseName]" >

  What are the attributes that I need to in order to access the database remotely?

  Thank you

  ^_^

  You configure a data source in the CF, pointing to the remote admin

  Server, using dbServer will not work.

  Mack

• Installing vCenter 4.0u2 with the remote server in SQL2008

  I've been running vCenter 4.0 for awhile with SQL Express on the same machine.  I installed SQL Server 2008 on a remote computer, detached and attached the SQL Express database to that server.

  I've implemented the SQL 2008 database with a SQL rather than a domain account authentication account because our domain accounts will expire every 90 days and I have no control over making an exception to this policy.

  I have tried everything point vCenter 4.0 to the new database using the instructions in the knowledge base, but it has always failed.  So I just uninstalled (who also failed and I had to manually get the rest but this is not the point of this post).  When I go to install vCenter 4.0u2 with SYSTEM defined as the user vCenter (again because of limitations of domain account and expire 90 days), it gets all the way up to the

  "

  25003.Setup failed to create the vCenter repository"

  and then breaks down.  It's probably something with the user accounts on SQL authentication and vCenter Server does not, but how can I work around this? If I do a local account on the vCenter server with the same name and password on the vCenter server and run it like this account which will solve the problem?

  Check here also, not exactly the question, but it can help to point you in the right direction.

  http://KB.VMware.com/kb/1017596

• moving my SQL Server to another host (with vcenter database)

  Hi all

  I am in progress to improve my environment at ESX4.0. Now I have to move my only SQL server VM to the new host, who is already on ESX4.0 level. My only SQL server hosts the vCenter as database. I don't have a vMotion.

  To move my SQL vm, I need to turn it off and then migrate my ESX 4.0 host. The problem: when the SQL Server is disabled, I lose connectivity to the vCenter server and therefore cannot migrate the virtual computer to another host.

  Is there a way to fix this, or is my only option to move the virtual machine in question off vCenter SQL database?

  The physical files of the VM for SQL server on an iSCSI box and will not change the location of the data store.

  Thank you

  Edy

  Open the browser of data store, right-click right the VM's vmx file and choose "add to the inventory.

  André

• Configuration of host and remote business partners

  Hello
  
  As new B2B, I have a very basic question.
  I have two machines, one which I use as a host of trading partner the other remote business partner. The steps in configuring the host partner would be the same as those required for the configuration of the remote trading partner?
  Currently the commercial host end partner, in addition to create identifiers for the host partner commercial, I am also
  1. create the remote partner
  2. create the credentials for the trading partner in the distance
  3 assign documents to the remote trading partner and
  4. creation of the delivery to the business partner channel.
  
  I guess I should do a similar configuration to the remote end of trading partner, before creating agreements for business partners.
  Is there something else that needs to be handled?
  
  It would be awesome if someone can share step-by-step instructions that would be required to set up the host and remote business partner. I use Oracle 11g B2B and have not worked with previous versions of B2B.
  Any help in this direction will be greatly appreciated.
  
  Thank you
  Priya.

  Hi Priya,
  Steps are correct and you must configure both machines.

  You can reference B2B samples available in samples of SOA in link below:
  http://www.Oracle.com/technology/sample_code/products/SOA/index.html

  In this step by step instruction, guide is available.

  You can check out below recipe books:
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU001_EDI.PDF
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU002_HL7.PDF
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU003_ebxml.PDF

  Please let us know your protocol and usecase to know more details.

  Rgds,
  Nitesh jegou