Import DLL: control to the @dummy @.

Similar Questions

• I need to import 3 different images in a control of the ring who align properly

  I want to design a 3 switch channels using 3 different images in a ring of photo to represent each of the 3 positions of the switch.  I can't get these images to align properly for this because they seem to stick in the control of the ring with different coordinates. How to achieve this alignment of multiple-image?

  If the reason was by selecting the whole picture.

  Seems to me best way to copy Edit-> import the image into the Clipboard. In this way, he treats transparent color correctly and imports a complete image.

• Import data from text file of control of the ring.

  Is it possible to import data to a text ring with labview control.

  I have several definitions of register in the ring controls, but manual entry would take a lot of time.

  Was wondering if there was more automatic way, I could read the values from a file.

  Thank you

  Jim

  Using the first method gives you the ability to extend such that each column specifies a control of the ring if you need fill the multiple rings.

  This example assumes that all of the three rings contain the same number of elements. If this isn't the case, you will need to create a Subvi, which removes the empty elements. [Edit - create a text file that contains a column for each ring, separated by a tab character.]

  

• Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Can you indicate the corresponding code and the full error message?  Before the race going in your publication of Flash settings and select the option to enable debugging - it can help by adding information in the error message.

• 11.0.07 blocks the acropdf.dll activex control in the application of part 3

  Hi, we use a piece of software that uses the library acropdf.dll - update of Adobe Reader (any version of Windows) to 11.0.07, software that uses acropdf.dll crashes as soon as it tries to display a PDF file (citing acropdf.dll as the module that failed) - roll back to any previous version of Adobe Reader solves the problem.  (Same 11.0.06 works very well) - this was repeated several times on different machines and different versions of Windows, all with the same result.

  Is this a known issue with the 11.0.07 latest version?

  Thanks in advance.

  For those who can still access their VB6 source code - replace the PDF control with a web browser control and in turn all the events of pdf.load with the web.navigate event - this effectively avoids the problem by forcing the PDF file appears on your form within the browser control.  I have now deleted all references to the PDF control in the project, and only use the web control - overall it feels much the same operation.

  (Started the re-written in VB.net now if...)

• WmiPrvSE.exe constantly calls c:\windows\system32\tzres.dll and tzres.dll.mui in the Windows 7 SP1

  clean install of Windows and all the Windows updates applied, same Microsoft Security Essential antivirus installed, and the WmiPrvSE.exe process constantly calls c:\windows\system32\tzres.dll and tzres.dll.mui in Windows 7 SP1.

  If the use of the HARD drive is never-ending, because he calls the files per second, and I have the red light of the hard disk activity lights up every second.

  

  also this problem because constant use of the processor to 3% in my PC, the WmiPrvSE.exe process never stop calling the above mentioned files.

  Hello

  For a better understanding of the question, I would like to know if the computer is connected to the domain network?

  Windows® Management Instrumentation (WMI) is a component of the Microsoft Windows operating system that provides control and management information in an enterprise environment. With wmiprvse.exe, managers of files in enterprise environments are capable of configuring and searching for desktop system or network information and applications on the network. Developers use the wmiprvse.exe file to develop applications used for monitoring purposes. These programs can inform users about important events associated with the right management of network and files or applications after each event occurs.

  Method 1:
  I suggest you to put the computer in a clean boot state, and check if the problem persists.

  Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to install all Windows updates available including the optional updates and check if it helps.

  See the article for more information.
  http://blogs.msdn.com/b/WMI/archive/2009/05/27/is-Wmiprvse-a-real-villain.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Missing when importing DLL functions

  Hi all

  I created a DLL using Matlab.  When I try to import in LabVIEW (version 8.6 or 2009), most of the functions don't appear.  Any ideas?  This has been done with Matlab R2010a.  I looked through other messages on the subject of Matlab DLL but they were all parties concerned to do anything to work at all.  In my case, certain functions through but not all of them.  I tried to attach files, but it wouldn't let me...

  Thank you and I hope that it is something really simple that I'm dominant.

  -Matt

  OK, I thought about it... This is an annoying problem of a Matlab (I think).

  The problem is that once you import the DLL (and I don't know exactly when) - you can not add more functions of the DLL.  So the first time I tried to do this, I had only one function.  Later, I added more - but they were simply ignored.  I have rebuilt (in Matlab) as a new project, imported from the DLL again, and the problem disappeared.

  It is also possible that it could be a problem of LabVIEW with the file lvlib (?) is not updated correctly, but I do not really - I know how to run now.

  -Matt

• Spooky: Front lost control of the scheme code

  I have a LabVIEW (Win7-64B LabVIEW 14.0 32 bit) program that behaves a little bit scary.

  On some occasions, while the LabVIEW tandis que le LabVIEW programme program is running, suddenly the front panel controls are no longer read by the process of block diagram. So that's what I see:

  • The program runs, processes the data, and updates indicators as expected.
  • The run button is in unmanaged mode even if the program continues to run.
  • The button abandon red is not functional - push has no effect.
  • The block diagram can be debugged, simple staircase and breakpoints.
  • The controls on the front panel are not read and the program cannot be stopped because it is based on the action of the Panel before doing so.
  • The run button is non-functional in the sense that it can be pressed in run mode, but he has no apparent effect on the State of the block already running diagram.
  • The only way to stop the program is closing the front panel.
  • The behavior occurs at random times, is annoyingly frequent, but not enough (frequent) to make debugging by elimination of effective code.

  The program is a construction of State machine using queued messages and access material cRIO via shared variables.

  I know that this information is rather rare in which case debugging suggestions, but in which direction to look for all ideas are welcome.

  Some of these could possibly be explained by things like the user interface is locked by a structure of the event or updates to defer property is set on the Panel or being stuck in a call from the DLL, but there is another option that seems to match your description a little: https://lavag.org/topic/17049-windows-aero-theme-and-lockup/?p=104728

  When I saw him it was in an EXE file, so I can't comment on things like execution of arrows, but it was definitely a case where the VI was certainly running and updating the user interface, but was not receiving updates of the user interface.

• Outsourcing of the controls on the front panel for a panel floating Subvi

  Hello!

  I already found a few similar topics, but I still don't know which is the best way to solve my problem. I will try to describe my problem in detail first: I have a main VI that acquires data from a device and displays these data in a large waveform graph. I have also a few controls on the front panel to control my device. First, I placed all of these device controls (digital, sliders, etc.) as well as the chart inside the front of my main VI. However, due to limited screen space now I would like to make the largest possible graph and so decided to "outsource" some controls out of the main façade of VI to several panels front-end Subvi.

  I would then press a button in my main VI and it would open the Panel before the floating of the Sub - VI corresponding with outsourced controls when required. However, everything must be absolutely transparent. It is important that floating panels to run in parallel with my main VI, that is the main VI must continue to operate. That way I'll have my data constantly updated in the chart in my main VI while I can change some settings of the device through the controls placed in my SubVIs. These changes will be immediately applied (for example as soon as the main VI calls this slot - VI in its main loop).

  It is important to the visibility of the outsourced optional control panel, i.e. If the Subvi front panel opens with the user that it will pop up and the user will be able to change the paramers device using the. But then the user should be able to close the front panel (hide) the Subvi to see the entire chart again without the Panel floating in front of her (of course control values must be maintained when the Subvi front is not visible). Then the new button is pressed in the main VI that opens the dialog box not modal Subvi containing controls and it can redefine new values of device.

  Advice how to do this are welcome. I don't know if I need something complex like VI server or asynchronous screws or I can solve my problem by changing some settings simple Subvi? Thank you in advance for your help!

  Best regards

  Anguel

  AStankov wrote:

  How about using a global variable for the VI at VI communication instead of a queue?

  A global variable will, also.  Write you in one place and read the value frequently to somewhere else (in the election). So you can see easily to any value change.  However, mark will waste a lot of time processor.  This is why I have proposed to use a queue or a notification utility.

  AStankov wrote:

  Would be the last option that you mentioned, i.e. finish the Subvi at each change of value, I would keep the Subvi front open as needed until things from the user to hide? Or would there be inevitable flickering Panel or any other drawbacks?

  Yes, the Subvi can keep the façade open until the user closes. And there should be no flickering.  The biggest drawback I see right now is that when you expect an event in the Subvi, the mainVI cannot stop without talking to the Subvi to stop.  So you'll need another channel of communication (again a global, a queue, a declarant or an event) to tell the Subvi that she must stop.

• RT - error import dll

  Hello

  I am trying to use a dll I wrote on a PXI + RT

  I have compiled the dll using visual studio express 2010 on windows vista. Import and the dll under labview on my workstation works fine.

  but when I try to load the program on a PXI + RT I get a bad import error.

  The use of the auditor of dll RT (version 2009 and 2011), I see 25 bad msvcr100.dll imports and kernel32.dll. Some of the functions I can not import correctly are:

  DecodePointer, DecodePointer, CreateEventW, CreateSemaphore, etc...

  I am new to using the dll in LabView and I wonder if I missed something or if I'm doing something wrong...

  Can you help me?

  Thank you

  Carlo

  You cannot directly call Windows functions but certainly C runtime library functions. And C in Visual C runtime library is essentially built on the Windows API. So if your DLL connects with the Visual Studio C runtime somehow you pull various imports in your DLL. Indeed imports you listen to are mostly located in msvcr100.dll which is the C runtime library. Even if you don't make use of any C-runtime function that is, Visual C still shoot in the C runtime references for his start-up code for the DLL.

  In a normal Windows system you can simply install the installer distributable runtime for versions of the libraries C runtime that corresponds with your version of Visual Studio, but in the real-time system that is not a real option as each newer runtime depends on new similar Windows API. Of course, this is NOT intentional (ha!), but simply in the interest of all users like the new Windows APIs automatically means more security, right?

  OR supposedly installed a specially designed DLL MSVCR who very probably, they build themselves to work for kernel real time installed on a system, but that is based on an earlier version of the runtime C MS (and I do not know what Treaty of Redmond licenses should be allowed to do, but I don't know there are many legalize involved there). Basically what wants to say, you must use the version of Visual Studio that is compatible to the runtime library C MS available on the target in order to create shared libraries, real-time search just a msvcrxx.dll in your system in real time and you can see on the xx, what version that should be (except that the version numbers are not as simple to match more but 7.0 was VS 7 7.1 was VS 2003, VS 2005 was 8.0, 9.0 has VS 2008 and VS 2010 10.0 a). Alternatively, you can try to find an installation of Visual Studio 6.0 with SP 5 and compile your DLL. This DLL will use the Microsoft internal standard C runtime MSVCRT. DLL which avoids the whole versionities to the potential cost of disorders of DLL hell.

  Another option could be to use some based MinGW compiler toolchain. They usually use MSVCRT. DLL too much for their C runtime binding. Another option is to install the Windows Device Driver Kit or how it's called these days. The command line compiler toolchain that comes with it, is also linked to MSVCRT. DLL instead of a specific VS runtime library.

  Trying to trick the new version of Visual Studio by using MSVRT. DLL is rather an exercise in vain that I had to discover in the many hours spent on this. My current approach is to use VS 6 to create DLLs in real time, since I have available, but you can not buy more or download it from Microsoft.

• Shimgvw.dll file in the sys32 folder can be boggus

  Shimgvw.dll file in the sys32 folder can be boggus, no propertys tab, how to save file from another folder that has the legitimate Properties tab?

  Update security for Windows XP (KB2483185) Last published: 08/02/2011

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  This update downloads ok but fails to install, so I did a manual download and install, but when asked for the location of shimgvw.dll during installation and I point to the file in the sys32 folder the update fails, it seems, there are 3 versions of this file, but the System 32 folder isn 't legitimate because it does not appear info version or company. "

  What can I do?

  Q1: When you say Properties tab are actually referring to the Version tab, i.e. right click on the file, select Properties and no Version and summary tabs not only general tab?

  Q2: Did you check C:\Windows\System32|dllcache for shimgvw.dll? Should be the same version 6.0.2900.6072-429 KB Windows Picture and Fax Viewer-Application Extension

  . If folder dllcache a Version tab displays the above version number and Microsoft Corporation as the owner, then could cut and move of the System32 folder then vouscopiezetcollezle the dllcache to the System32 folder and try regsvr32 shimgvw.dll in the run > open: box. If registration is successful, try to manually update again.

  There is always the posibilty of the malware infection. Have you MSE working properly?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  I hope this helps.

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• I get a window when I start my computer that says: import DLL may be missing, damaged or wrong version. File 'rt170.bpl' error 126

  I get a window when I start my computer that says: import DLL may be missing, damaged or wrong version. File 'rt170.bpl' error 126

  How can I fix this error code, it happens every time I start my computer?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How can I disable my control of the administrator?

  HOW CAN I TURN OFF MY CONTROL ADMINISTRATOR. I have TRIED TO SIMPLY clicking the OTHER OPTION, BUT IT DO WILL NOT CHANGE. I HAVE TRIED TO CLOSE the COMPUTER towards the BOTTOM FOR RESTART AND THAT DOES NOT WORK EITHER

  By administrator, do you mean the user access control?  If so, I strongly recommend that you don't do that despite the indonvenience because it is an important element of the security of your system.

  But if you're going to do it anyway, here's the procedure; http://www.howtogeek.com/howto/windows-vista/disable-user-account-control-uac-the-easy-way-on-windows-vista/.

  I hope this helps and if you do against my strong recommendation that you don't have, you don't live to regret it later.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• C:\Windows\System32\***32.dll errors, from the start of the system and start the program.

  Hey. I received error messages and may not know whats going on. At the start of my laptop (Vista Premium 64, 2.0 ghz Core 2 Duo, 4 GB RAM, 250 GB hd), a series of error messages from reading: "* program title *-bad Image."      C:\Windows\System32\*Dllname here*.dll is not designed to run on Windows or it contains an error. Try to install the program using the origial installation media or contact your system administrator or support software provider. "The name of the cottage change programs and I get messages of 15 or more at the same time. The first so-called 'C:\windows\system32\fwcfg32.dll' error count, the next will say "khdtj9jg32.dll" and the final few say "dispex32.dll". Whenever I hit "ok" in the message, the name of the program window in the changes of the header. I tried to solve my problems (with no success) and do you have a file search for the files in the locations of scpecifed in error messages. I discovered the three files (fwcfg32.dll, khdtj9jg32.dll, dispex32.dll) do not exist in the system32 folder, but they do exist in the "syswow64" folder The system32 folder has files fwcfg.dll, khdtj9jg.dll and dispex.dll in if (note the "32" is not included in the file names). I was on my computer for 7 hours yesterday without problem, and everything I did was organize music files in my documents. I went online to look for something, then shortly after my computer slowed down upwards. He acted as if the RAM was complete (although he was not even 25% used), so I just rebooted my laptop in the hope that a RAM reset would fix it. Then restart I started to receiver messages error and also whenever I start a program. I scanned my system and removed 7 Trojan horses... even if I run Norton and Webroot SpySweeper somehow these got... that's not the point. I have a feeling easily, that played a helping hand to my troubles, and those who are deleted from my computer. Now, I have to recover from the disaster. Any suggestions? Thanks for your time!

  P.S. ~ just like a note aside, I did several searches on the internet, including on the microsoft forums, for the names of 'fwcfg32.dll', 'khdtj9jg32.dll' and 'dispex32.dll'.dll files and got zero results.

  Hello

  It seems that you have an important infection using the below methods of OVERKILL checking that no one can program
  detect or remove malicious software. Only when you are 100% sure you're own doing the cleaning included below.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Cleaning ONLY when you are sure that the system is clean:

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.