Import/Export, impdp ORA-39083 on creation of the important role

Version of DB 10204 on Windows 2003

I clean a couple of databases by moving DB_OLD to DB_NEW database schemas and while doing so, I want to clean the unnecessary privileges and roles granted to the users/schema.

I exported the schema of DB_OLD using expdp username@dbname parfile = D:\exp.par, inside her parfile I have:
JOBNAME = EXP01JOB
DIRECTORY = DUMP_DIR
DUMPFILE=EXP01DUMP%U.DMP
SCHEMAS = SCHEMA1, SCHEMA2, SCHEMA3
PARALLEL = 4

Everthing works well, the export is successful.

When you import into DB_NEW, I use the impdp. I import using a file by as well and it works too, all objects belonging to the imported schemas, as well as all privileges for users and schemas.

Issues related to the:

(a) I tried to use EXCLUDE = of the export SUBSIDIES parfile, but it did not work. I want to export all the objects, but I want to clean what gets granted (sys privs and privs and role object) to the owner of the schema DB_NEW. So before exporting it, I tried to create the username and privileges in DB_NEW and then performs the import schema, but after importation that especially original DB_OLD privileges have been granted to the user in DB_NEW.
Any other way around this? Here's what I ran into DB_OLD to see what had privileges SCHEMA1.

SELECT DBMS_METADATA. GET_GRANTED_DDL('ROLE_GRANT','SCHEMA1') FROM DUAL;
SELECT DBMS_METADATA. GET_GRANTED_DDL('SYSTEM_GRANT','SCHEMA1') FROM DUAL;
SELECT DBMS_METADATA. GET_GRANTED_DDL('OBJECT_GRANT','SCHEMA1') FROM DUAL;

Say that there is no workaround for the issue a solution) that is just the way would be to export schema and I revoke and to grant privileges.

(b) I can not understand how to know what roles objects belong to? In the import.log, I see that I see this error:

Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
ORA-39083: Type than object_grant cannot create with eror of object:
ORA-01917: user or role 'SCHEMA1_READONLY' does not exist
Because SQL is:
GRANT SELECT ON "SCHEMA1". "' TABLE_NAME ' TO 'SCHEMA1_READONLY '.

I see that it is due to a role missing in DB_NEW, if I first create the role that I'm guessing that the error would not be there. However, I can't find a view of $ v that has this role. This role is created to allow certain users READ_ONLY access SCHEMA1 tables. What view should I be query to get the data? I looked at all the views that are listed under the dba_views which are like '% ROLE %' and I couldn't find the role "SCHEMA1_READONLY" listed in any of them.


Thanks and let me know any suggestions.

Hello

Did you views dba_tab_privs and dba_roles that would help you to know what are the tables has the roles.

Concerning
Anurag Tibrewal.

Tags: Database

Similar Questions

  • Impdp ORA-39083 error: INDEX could not create with object type error:

    Hi Experts,

    I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs


    I did export with this command.

    patterns of HR/hr = hr = TEST_DIR dumpfile = HR.dmp logfile directory expdp = expdpHR.log statistics = none

    that the user HR with the option drop waterfall.


    And try to import it HR schemas in the database by the following.

    Impdp System/Manager schemas = hr = TEST_DIR dumpfile = HR.dmp logfile directory = expdpHR.log statistics = none

    Here is the error

    imported 'HR '. "" PQH_SS_PRINT_DATA "0 KB 0 rows

    ... imdoor 'HR '. "" PQH_TJR_SHADOW "0 KB 0 rows

    . . imported 'HR '. "" PQH_TXN_JOB_REQUIREMENTS "0 KB 0 rows

    . . imported 'HR '. "" PQH_WORKSHEET_BUDGET_SETS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQH_WORKSHEET_DETAILS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQH_WORKSHEET_PERIODS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_ALIEN_TRANSACTION_DATA "0 KB 0 rows

    . . imported 'HR '. "" PQP_ANALYZED_ALIEN_DATA "0 KB 0 rows

    . . imported 'HR '. "" PQP_ANALYZED_ALIEN_DETAILS "0 KB 0 rows

    . . imported 'HR '. "" PQP_EXCEPTION_REPORTS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_EXT_CROSS_PERSON_RECORDS "0 KB 0 rows

    . . imported 'HR '. "" PQP_FLXDU_FUNC_ATTRIBUTES "0 KB 0 rows

    . . imported 'HR '. "" PQP_FLXDU_XML_TAGS "0 KB 0 rows

    . . imported 'HR '. "" PQP_GAP_DURATION_SUMMARY "0 KB 0 rows

    . . imported 'HR '. "" PQP_PENSION_TYPES_F_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_SERVICE_HISTORY_PERIODS "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEHICLE_ALLOCATIONS_F_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEHICLE_DETAILS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEHICLE_REPOSITORY_F_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEH_ALLOC_EXTRA_INFO "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEH_REPOS_EXTRA_INFO "0 KB 0 rows

    Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

    Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT

    Object type SCHEMA_EXPORT/TABLE/COMMENT of treatment

    Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC of treatment

    Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_INDEX/INDEX

    Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment

    Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS

    Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY of treatment

    Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment

    Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX

    ORA-39083: Type what INDEX failed to create object error:

    ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE

    ORA-20000: Oracle text error:

    DRG-50857: error oracle in drvxtab.create_index_tables

    ORA-00959: tablespace "APPS_TS_TX_IDX_NEW" does not exist

    Because sql is:

    CREATE INDEXES ' HR'.»» IRC_POSTING_CON_TL_CTX' ON 'HR '. "" INDEXTYPE IRC_POSTING_CONTENTS_TL "("NAME") IS"CTXSYS. "' CONTEXT ' PARALLEL 1

    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA

    Work 'SYSTEM '. "" SYS_IMPORT_SCHEMA_01 "completed with error (s 1) at 11:16:07

    SQL > select count (parameter), object_type from dba_objects where owner = 'HR' group by object_type.

    OBJECT_TYPE COUNT (OBJECT_NAME)

    ------------------ -------------------

    INDEX 37 PARTITION

    SEQUENCE OF 799

    TABLE 12 PARTITION

    LOB 70

    4 BODY PACKAGE

    PACKAGE OF 4

    3 RELAXATION

    2936 INDEX

    TABLE OF 1306

    Could you please suggest.

    Thank you

    MZ

    MZ,

    I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs


    Export and import of individual patterns of Oracle E-Business Suite stocked are not supported as this will violate referential integrity (except for custom schemas provided, you have no dependencies).

    Thank you

    Hussein

  • IMPDP ORA-39083: ORA-06564

    Hi all

    Redo EXPDP and IMPDP.

    How to avoid this error term impdp? When do the expdp treat?
    ORA-39083: Object type TABLE:"SPRODADM"."ET$0A9D022D0001" failed to create with error:
ORA-06564: object CCB_MIG_DIR does not exist
Failing sql is:
CREATE TABLE "SPRODADM"."ET$0A9D022D0001" ("ADJ_ID" CHAR(12 BYTE), "SEQNO" NUMBER(5,0), "TOU_CD" CHAR(8 BYTE), "UOM_CD" CHAR(4 BYTE), 
"SQI_CD" CHAR(8 BYTE), "RS_CD" CHAR(8 BYTE), "EFFDT" DATE, "RC_SEQ" NUMBER(4,0), "DST_ID" CHAR(10 BYTE), "CURRENCY_CD" CHAR(3 BYTE), 
"CHAR_TYPE_CD" CHAR(8 BYTE), "CHAR_VAL" CHAR(16 BYTE), "PRT_SW" CHAR(1 BYTE), "APP_IN_SUMM_SW" 
ORA-39083: Object type TABLE:"SPRODADM"."ET$099803190001" failed to create with error:
ORA-06564: object CCB_MIG_DIR does not exist
    The client give us just this dump and when I impdp there I encountered this error. What I will tell them to include things in the expdp so that
    I will not meet it?

    Thank you very much
    Kinz 
    ORA-06564: object CCB_MIG_DIR does not exist

    It's pretty simple, the directory object does not exist

    (a) create the directory object and copy the files from external table before running impdp

    or

    (b) ignore the error if the external table is not required on the site where you have imported, as a Data Pump dump contains only the metadata of the external tables with no data of the line

  • Import complete with grid (datapump) error ora-39083 control

    11.1.0.7 export to any 11.2.0.1 with grid control gives the following error in the import log:

    Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM
    ORA-39083: Type as procact_system cannot be created with the object error:
    ORA-20000: Incompatible Version of the Workspace Manager installed
    Because sql is:
    BEGIN
    declare the worm varchar2 (100); entire dummy; vdummy varchar2 (30); compile_exception EXCEPTION; PRAGMA E
    XCEPTION_INIT (compile_exception,-06550); invalid_table EXCEPTION; PRAGMA EXCEPTION_INIT(invalid_table,-00942); createErrorProc procedure is immediately start run "create or replace function system.wm$ _check_install return boolean is begin to return true"
    Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
    ORA-39083: Type THAT PROCOBJ cannot be created with the object error:
    ORA-29357: AUTO_TASK_CONSUMER_GROUP object already exists
    Because sql is:
    BEGIN
    dbms_resource_manager.create_consumer_group ('AUTO_TASK_CONSUMER_GROUP', 'Group consumer system operational maintenance','R)
    ROUND - ROBINe); COMMIT; END;

    ORA-29357: AUTO_TASK_CONSUMER_GROUP object already exists

    So what can we do for you?

  • ORA-39083: Type as procact_schema cannot be created with the object error:

    Hello

    on 11.2.0.4 on Win 2008

    Impdp is over, but with the error:

    ORA-39083: Object type PROCACT_SCHEMA failed to create with error:

    All tables are imported.

    If I create just the PROCACT_SCHEMA would it be sufficient?

    I can't DDL script for PROCACT_SCHEMA using dbms_metadata.get_ddl ('USER')?




    Thank you

    Hello

    Check this blog refrence:

    Error: ORA-39083, DBMS_CUBE_EXP PLS-00201 while impdp in Oracle DB Server v11.2.0.4 | DBA blog

    I hope this helps.

    Kind regards

  • ORA-39083: Object type TRIGGER could not create with error: ORA-04072:

    OS: windows Server 2003 STD 64 Bit
    DB version: 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit

    I use impdp to a certain pattern and you get the following error:

    ORA-39083: Type WHAT TRIGGER could not create object error:
    ORA-04072: invalid trigger type
    Because sql is:
    DBMS_DDL BEGIN. SET_TRIGGER_FIRING_PROPERTY ('"AGILETEST" "," "SWAPOPTIMIZER" ', ALF)
    SE); END;

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMA of treatment
    P/INDEX_STATISTICS
    Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment
    Processing object type SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX

    ----------
    I check in Metalink and found it to be a bug with no construction nearby.
    Bug 9858539 : DATA PUMP IMPORT FAILED TO TRIGGER LOGON ORA-04072: INVALID TYPE of TRIGGER

    ---------
    Any ideas?

    Well Yes, the patch is available for this bug 9858539 for 11.2.0.1 and 11.2.0.3.

    Salman

  • ORA-39083, ORA-00959: tablespace "TEST_LIVE" does not exist

    Hello

    I'm trying to import using impdp but I am experiencing at the below mentioned error...

    Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With partitioning, OLAP, Data Mining and Real Application Testing options
    Table main "TEST_230511." "' SYS_IMPORT_FULL_01 ' properly load/unloaded
    Start "TEST_230511". ' SYS_IMPORT_FULL_01 ': TEST_230511/***@GEMSDB REMAP_SCHEMA = RΘPERTOIRE TEST_220511:test_230511 = dump_dict = test_live_230511.DMP test_230511.LOG = LOGFILE DUMPFILE.
    Processing object type SCHEMA_EXPORT/USER
    ORA-31684: USER object Type: 'TEST_230511' already exists
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/DB_LINK
    Object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE of treatment
    Object type SCHEMA_EXPORT/TABLE/TABLE processing
    ORA-39083: object of type THAT TABLE could not create with the error:
    ORA-00959: tablespace "TEST_LIVE" does not exist
    Because sql is:
    CREATE TABLE 'TEST_230511 '. "" C_EXPENSECLAIMS_EMPLOYEE "("C_EXPENSECLAIMS_EMPLOYEE_ID"NUMBER (10.0),"AD_CLIENT_ID"NUMBER (10.0), NUMBER (10,0)"AD_ORG_ID","ISACTIVE"CHAR (1),"CREATED"DATE,"CREATEDBY"NUMBER (10.0), DATE 'DAY', 'UPDATEDBY" NUMBER (10.0), 'TRANSACTION_DATE"DATE, DATE 'EXPENSE_DATE', NUMBER (10.0) 'EXPENSE_TYPE_ID', 'BUDGET' CHAR (1) DEFAULT ('N'), THE NUMBER OF 'AMOUNT')
    ORA-39083: object of type THAT TABLE could not create with the error:
    ORA-00959: tablespace "TEST_LIVE" does not exist

    ORA-00959: tablespace "TEST_LIVE" does not exist

    Oracle has clearly tell you, need tablespace whose name is TEST_LIVE on the target database was created after that you can try import again.

  • ORA-39083: Type THAT TABLESPACE could not create object

    Hello
    I am importing a dump file into a new database by the following command line:

    Impdp system/***@orcl DUMPFILE is EXP_FUL_H9DEV. LOGFILE = mYLOG.log DMP

    But I have this error:
    ORA-39083: Type THAT TABLESPACE could not create object error:
    ORA-01119: error in creating database file ' D:\BASE\H9DEV\DATA\PSDEFAULT. DBF'
    ORA-27040: create file error, cannot create the file
    04002 - OSD: could not open the file
    S/O-error: (OS 21) the device is not ready.


    In the original database tablespace PSDEFAULT was on D: file system. But D: does not exist on the new server. How to tell datapump/oracle to create it on the same file system where the other new database datafile are (E:\oradata...)? An impdp command line parameter?

    Thank you.

    See the documentation for the following impdp option:
    REMAP_DATAFILE
    REMAP_TABLESPACE

    (and perhaps EXCLUDE?)

  • import problem ORA-01658: unable to create the STARTING point for the segment in your

    I created the above tablespace

    create tablespace SAMPLEDATA
    DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
    logging
    Local extended management
    segment space management auto
    Flashback on;

    create SAMPLE user identified by usrmringnew
    SAMPLEDATA default tablespace
    tablespace temporary temp;


    Import from 9 to 10r2

    IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system

    Unfortunately, it gives the error

    ORA-01658: unable to create the measure INITIAL segment in tablespace

    could someone kindly help me on this?

    Thank you very much!

    Hello

    As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

    Solution - you can use one of following:

    1. move the data file to a point of editing with sufficient space.
    2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

    Published by: sanjayIndia on October 8, 2008 09:02

  • ORA-19504: failed to create the file, ORA-00270: creation of the archiving log error

    Hello

    Oracle 11 g 2 on windows 7, I of primary and standby on the same system (learning).

    When I check on status of primary and secondary use under request it gives applied log is 'NO '.

    SQL > select sequence #, used from v$ archived_log;

    SEQUENCE # APPLIED
    ---------- ---------
    516 NO.
    517 NO.
    NO. 523
    NO. 524
    525 NO.
    531 NO.
    NO. 532
    533 NO.
    NO. 541
    544 NO.

    When I checked error on DB primary .he give me more erro.
    SQL > SELECT 'ID', 'DB_status' STATUS DEST_ID, EXCURSION place "Archive_dest', 'ERROR' OF V$ ARCHIVE_DEST WHERE DEST_ID < = 5;
    ---------- ---------
    Error Archive_dest
    ------------------------------------------------------------------------------------------------------------------------------------------------------
    1 D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG ORA-19504: cannot create the file «»

    2 STAND ORA-00270: creation of the archiving log error

    I checked the space on the system... is there enough free space on the disk.

    On primary DB (destination of the journal archive)

    SQL > list of archive logs
    Database log mode Archive Mode
    Active AutoArchive
    Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
    More old sequence of journal online 564
    Log sequence archive 566
    Current log sequence 566

    On standby DB (list of newspapers of record)

    SQL > list of archive logs
    Database log mode Archive Mode
    Active AutoArchive
    Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
    More old sequence of journal online 564
    Log sequence archive 566
    Current log sequence 566

    Please guide it's because of the destination of the journal archive even shared by the standby and primary?

    If yes how do I change the destination of the newspaper archive on standby DB?

    Thank you.

    Edited by: 977220 April 18, 2013 20:49

    change initialization parameter

  • dbms_scheduler.create_window fails with ORA-27418: syntax error in the interval of recurrence or calendar

    I tried to create a window to test the activation of plans of RM. But I get this error.

    SQL > EXECUTE dbms_scheduler.create_window.

    > (-)

    > window_name = > 'day ', -.

    > resource_plan = > 'my_plan ', -.

    > start_date = > systimestamp + 1 /(24*60).

    > repeat_interval = > ' freq = > daily '.

    > time = > ' 0 01:00:00 '.

    > Comments = > ' C know if it works without a job "-"

    >);

    BEGIN dbms_scheduler.create_window (window_name = > 'day', resource_p)

    LAN = > 'my_plan', start_date = > systimestamp + 1 /(24*60), repeat_interv

    Al = > ' freq = > daily ', duration = > ' 0 01:00:00 ', comments = > ' C so she

    works without employment '); END;

    *

    ERROR on line 1:

    ORA-27481: 'SYS '. "' DAY ' has an invalid schedule

    ORA-27418: syntax error in the interval of recurrence or calendar

    ORA-06512: at "SYS." DBMS_ISCHED", line 486

    ORA-06512: at "SYS." DBMS_SCHEDULER', line 1295

    ORA-06512: at line 1

    I have tried many tips found on the web, nothing works.

    Any help would be greatly appreciated.

    Also, can you pls tell me if this command run once automatically activates the my_plan after 1 minute, 1 minute, after which, it will disable the my_plan? So, you do not need to create a JOB for this. If you create a window, that is, as a job creation to enable an RM plan?

    2734369 wrote:

    Wow, discovered the issue: the repeat interval is broken (I use a database of 12.1 in Windows 7). It must be uppercase. Very surprising in the windows to be case-sensitive.

    SQL >

    SQL > EXECUTE dbms_scheduler.create_window.

    >  (-

    > window_name-online 'day ', -.

    > resource_plan-online 'my_plan ', -.

    > start_date-online systimestamp + 1 /(24*60).

    > repeat_interval-online ' FREQ = DAILY; BYHOUR = 10; BYMINUTE = 30', -.

    > time-online ' 0 01:00:00 '.

    > Comments => ' C know if it works without a job "-"

    >  );

    PL/SQL procedure successfully completed.

    Problem is, after 1 minute, always that the plan is not activated?

    SQL > SEE THE RESOURCE_MANAGER_PLAN PARAMETER

    VALUE OF TYPE NAME

    ------------------------------------ ----------- ----------------------

    resource_manager_plan chain

    Why the Plan is not activated after 1 minute. Have we not create a job (I don't think).

    I think you misunderstand the meaning of "start_date".  Please see the documentation on what this means exactly.

    This attribute specifies the first date and time where it is scheduled to open in this window. If the value start_date specified is in the past or is not specified, the window opens, from its inception.

    To repeat windows using an expression of the calendar to specify the repetition interval, the value of start_date is a reference date. The first time the window opens depends on the specified repeat interval and the value of start_date .

    (From Types and Oracle® packages of PL/SQL Database 11g Release 2 (11.2) reference E40758-03); dbms_scheduler, create_window.  DBMS_SCHEDULER

    Once you have done this, you will see that it is pretty useless to specify that you have.

    Your repeat_interval said "every day at 10:30.

  • How to make a video exported always matches what is shown in the window of the program?

    I try to export several videos HD 1080 p for YouTube, nothing will do, often get weird proportions and still get black bars on the sides or the bottom and top (sometimes with the same rendering settings) in the final exported video.  The problem that I am facing has a very clear expected result with the following:

    • Export EXACTLY what is shown in the window of the program
    • Have the appropriate settings for the video good exported any standard modern computer screen (although this resolution can be)
    • Have the right settings for any project to export a 1080 p video that FILLS the screen in full screen
    • Have the exported video not stretch, scale or decreases in quality
    • Be able to use this project as a "Preset" for all of my future videos

    Whatever my current settings, what I need to do to make sure an exported video remains at its highest quality while also never showing black bars?  I'm ready to start a new project from scratch if I need to.

    Additional information:

    • I'm new to this software, using the free 30 day trial of Adobe first Pro CC 2014
    • I use images from sources that are larger than what is shown in the project window.  For example, I stepped up a rectangular background image so I could animate the rotation without revealing the empty corners in the video.

    I suppose that when a video is rendered, it flush with all source material that is not in the frame.  If this is the case, why are the exported videos different from what is shown in the window of the program and make preview?  Thanks in advance for your help.

    The sequence settings say:

    Preview file format: I-Frame only MPEG

    Codec: MPEG I-Frame (out parameters)

    Width: 1920

    Height: 1080

    However, it seems that doing a new project and everything again after setting parameters of the sequence to what I had before some fixed my problems.  Now, the program window corresponds to the export preview and export correctly.  However, this does not identify what caused the problem.

    As far as I can tell, it's a glitch in Adobe Premiere caused by importing a source file, exporting in the wrong resolution (32: 21), then trying to change the resolution and export again in the same sequence.  For anyone else facing this problem in the future, make a new project, set up the correct resolution (16:9) in sequence settings and THEN export.

    Thank you all for your help!

  • ORA-39070: unable to open the log file, while using expdp

    Hello
    Please notice why I get ORA-39070: unable to open the log file.
    When you run the expdp against the default directory: the expdp DATA_PUMP_DIR is completed successfully.

    -current direcory on the Linux file system:
    $ pwd
/log_files/oracle/cdl1
    -Create directory and grant of read/write on it
    $ sqlplus sys/xxxx@cdl as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Wed Feb 22 16:36:01 2012
Copyright (c) 1982, 2011, Oracle.  All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options

SQL> create or replace directory EXPTEMPDIR as '/log_files/oracle/cdl1';
Directory created.

SQL> grant read,write on directory EXPTEMPDIR to system;
Grant succeeded.
    -Verify the existence of the directory:
    QL> select * from dba_directories;

OWNER      DIRECTORY_ DIRECTORY_PATH
---------- ---------- --------------------------------------------------
...
SYS        EXPTEMPDIR /log_files/oracle/cdl1
...
    Check for permission to write to the directory:
    [/log_files/oracle/cdl1]$ touch 1
[/log_files/oracle/cdl1]$ ls -l
total 0
-rw-r--r-- 1 oracle oinstall 0 Feb 22 16:38 1
    -try to expdp:
    expdp system/xxxx@cdl FULL=y DIRECTORY=EXPTEMPDIR dumpfile=expfull220212.dmp
Export: Release 11.2.0.3.0 - Production on Wed Feb 22 16:38:33 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.   <<<<<<<<=======
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation

    Post pl OS details - it's an RAC instance?

    Error ORA-39002 ORA-39070 ORA-29283 ORA-6512 when you use Export DataPump (EXPDP) [ID 1305166.1]
    Export DataPump (EXPDP) triggers errors ORA-39002 ORA-39070 ORA-29283 ORA-6512 on RAC Instance [1317798.1 ID]

    HTH
    Srini

  • Ora-13033 invalid data in the sdo_elem_info_array in object geometry sdo

    Hello

    I get this error when I create spatial indexes on the geometry.

    I think I have a problem with some lines of my geometry data. I identified and corrected these problems so far. but I always error on the creation of a spatial index.

    -the Gtype vacuum in a few lines
    -bad Gtype in a few lines

    Error full.

    ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE
    ORA-13249: internal error in the Spatial index: mdidxrbd
    ORA-13249: IERREUR in Spatial Index: index generation remote
    ORA-13200: internal error RowID:AAANZE / AAFAAALFaAAP... in the space for indexing
    ORA-13206: [] internal error creating the spatial index
    ORA-13033: invalid data in the sdo_elem_info_array in object geometry sdo
    ORA-06512: at the 'MDSYS. SDO_INDEX_METHOD_10I', line 10

    I have data on line for this table and this is the sample data.

    GEOMETRY (SDO_GTYPE, SDO_SRID, SDO_POINT_TYPE (X, Y, Z), ANSDO_ELEM_INFO, SDO_ORDINATES)
    --------------------------------------------------------------------------------
    SDO_GEOMETRY (2002, 2958, NULL, SDO_ELEM_INFO_ARRAY, (1, 2, 1), SDO_ORDINATE_ARRAY ())
    598520.994, 4837106.63, 598462.359, 4837164.63))

    SDO_GEOMETRY (2002, 2958, NULL, SDO_ELEM_INFO_ARRAY, (1, 2, 1), SDO_ORDINATE_ARRAY ())
    599229.43, 4837127.13, 599089.675, 4837264.62))

    SDO_GEOMETRY (2002, 2958, NULL, SDO_ELEM_INFO_ARRAY, (1, 2, 1), SDO_ORDINATE_ARRAY ())
    599280.002, 4837024.46, 599295.689, 4837048.09, 599296.21, 4837055.13, 599294.64
    5, 4837062.43, 599229.43, 4837127.13))

    SDO_GEOMETRY (2002, 2958, NULL, SDO_ELEM_INFO_ARRAY, (1, 2, 1), SDO_ORDINATE_ARRAY ())

    GEOMETRY (SDO_GTYPE, SDO_SRID, SDO_POINT_TYPE (X, Y, Z), ANSDO_ELEM_INFO, SDO_ORDINATES)
    --------------------------------------------------------------------------------
    599089.675, 4837264.62, 599028.567, 4837324.34))

    SDO_GEOMETRY (2002, 2958, NULL, SDO_ELEM_INFO_ARRAY, (1, 2, 1), SDO_ORDINATE_ARRAY ())
    595925.144, 4839146.42, 596002.765, 4839128.11, 596007.989, 4839126.85, 596013.5
    22, 4839123.09, 596056.926, 4839089.74, 596100.769, 4839065.62, 596106.694, 4839
    063.81, 596110.438, 4839064.27, 596115.548, 4839066.47, 596181.122, 4839135.22,
    596183.623, 4839140.59, 596183.706, 4839145.03, 596183.319, 4839148.15, 596181.1
    78, 4839152.64, 596174.794, 4839163.26, 596165.136, 4839174.75, 596143.191, 4839
    194.57))


    Note also that I have correct size in the table 'sdo user geom meta data' and at my table.

    Any help is greatly appreciated.

    Rose

    Rose,

    Just a few questions:

    1. What is the source of your data?
    2. How did did you load it?
    3. have you already validated with SDO_GEOM. VALIDATE_GEOMETRY_WITH_CONTEXT?

    Kind regards.

    Ivan

  • ORA-01655: impossible to extend the cluster SYS. C_FILE #_BLOCK # 128

    Hi all

    Oracle 10g. Linux.

    I am facing the error while trying to import a dumpfile below

    IMP-00003: ORACLE error 604
    ORA-00604: an error has occurred at the SQL level 1 recursive
    ORA-01655: impossible to extend the cluster SYS. C_FILE #_BLOCK # 128 in the SYSTEM tablespace
    IMP-00017: statement failed with error ORACLE 604:
    ' CREATE TABLE 'EBFA25_RGS_MM0001' ('RECID' VARCHAR2 (255) BLOB 'XMLRECORD') ".
    "PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255" STORAGE "(FREELI 65536 INITIAL."
    "(M 1 FREELIST GROUPES 1 BUFFER_POOL PAR DÉFAUT) LOGGIN TABLESPACE"T24DATAXML"" "
    'G NOCOMPRESS LOB ('XMLRECORD') AS 'LOB_EBFA25_RGS_MM0001' (TABLESPAC STORE '.
    "E" T24DATAXML"ACTIVATE ONLINE CHUNK STORAGE RETENTION STORAGE CACHE 8192 (EN'
    "(ITIAL 65536 FREELISTS 1 FREELIST GROUPES 1 BUFFER_POOL PAR DÉFAUT))" "

    Thank you
    KSG

    It seems that the value for minextents for your tablespace is located at 56 and tablespace doesnot have enough space to allocate as much quantity of memory regarding the contiguoes extensions. Then, either you need to add a data file tablespace or resize the existing table. You can also try the decrease of the Minextents value for the tablespace if you think this tablespace has enough space to accommodate segments. Better would be to add a file or resize a file.

Maybe you are looking for

  • What is a "dynamic dependency?

    Hi all I read white papers on the management of a base of Labview code correctly and I've seen several references to 'dynamic dependencies. Can someone explain what dynamic dependency is and provide a simple example? I couldn't find a good explanatio

  • Games menu

    menu games on the start menu does not

  • problem with update of the

    I got error 80073712 in update of the. I tried to fix it, but it appears that he cannot fix update please help. my system is 32 bit n os windows vista Home premium n I m remains to download the SP1 updates. pls help.

  • Restore to factory sessions blackBerry Smartphones

    Dear, I need to restore my phone factory so sitting could you please tell me how I can do this question Please be inform that my phone model is 8900 curve and the operating system is v.5

  • Backups of blackBerry Smartphones

    When I backup my BB Torch 9800 on my MacBook Pro, why am I unable to open the file on my computer using MS Word or TextEdit? I would like to read the file to make sure that the date of the unit have been transferred correctly and completely. Also, wh