Import/export of Audio problems

Similar Questions

• Export media - audio problem (Bug!)

  When you try to export a first edit of a feature film, I've been working on, each time as a part of the film that don't (yet) its in on the timeline, the exported video has a loop to repeat the last second, or so the audio last which was in the timeline before the gap. That audio is repeated annoyingly for both continues the silent part of the timeline and then stops as soon as there are more audio content later in the timeline.

  Does anyone else know this?

  All solutions?

  This came out a couple of times. One thing that works is to add an audio clip to blank sections of the audio track and cut this clip. Or use a silent clip. Anyway to see that there are no points in sequence without audio tracks. Another possibility (if you're put on hold using TEA) is to try a direct export of PrPro.

  Neil

• Audio problem when exporting effects with dynamic link first.

  Hello, when I export a project in which I have a sequence of first (dynamic links) in document exported sequelae, gives equal format (h264, quick time...) when to finish the soundtrack and the video of closing at the last second make me a second audio as repeated in the final, but it is nor in the proposed establishment or the after , also I tried to export the audio (exported since the first) on the separate track and the link dinamic without audio (mute), but nothing new... everyone knows it can happen? Thank you very much. Attached example... (not she can join a section of video to my computer!?)

  Adobe Creative Cloud (now Yes...)

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• MPEG2 no audio on export and Dimension problems!

  Hi all

  I searched around forums and have not found the answer to my question, or at least, I don't think I have.

  Basically I have an intro second 28 I edited in first CS5. I have all the updates.

  My problem is that I want to be exported in great quality, so I choose MPEG2 Blu - ray. I put my dimensions up to 1920 x 1080, because this is necessary for my manager.

  I have an audio track as well, who plays fine on any other export (HDV 1080 p 25, DVCPRO 1080 p 25 etc.) but when you export as MPEG2 audio does not appear in the reading. Nothing is cut.

  The reason why I chose the MPEG2 is because all the other settings give me either 1440 x 1080 and I am unable to change it. When I change up to 1920 x 1080 on playback it is 4:9 aspect ratio rather than 16:9, so unless it's something I'm doing wrong in the settings, I don't know.

  Whatever it is, I read that I need to purchase a license of Dolby to use MPEG2 audio, is this correct and if not, how do audio exported with MPEG2?

  Here are my settings;

  MPEG2 Blu Ray

  Format: MPEG2 Blu Ray

  Preset: Custom

  Video;

  Codec: MainConcept MPEG video

  Quality: 5

  TV standard: PAL

  Image size: 1920 x 1080

  Frame rate: 25

  Order the field: Auto

  Pixel format: Auto

  Profile: hand

  Level: high

  Encoding Bitrate: VBR 1 Pass

  : High Bitrate

  GOP settings:

  M frames: 3

  N frames: 15

  Audio:

  Audio format: PCM

  Codec: PCM Audio

  Output: stereo

  Sample size: 16 bit

  Frequency: 48 kHz

  Multiplexer:

  Multiplexing: None (TM do I need?)

  QuickTime

  Screening: PAL DV widescreen

  Video:

  Codec: DVCPRO HD 1080 p 25

  Width and height (I can't change that): 1440 x 1080

  Frame rate: 25

  Audio:

  Codec audio: uncompressed

  Screening: PAL DV widescreen

  Video:

  Codec: HDV 1080p25

  Quality: 100

  Width and height: 1920 x 1536 (with lock) 1920 x 1080 (without lock)

  Frame rate: 25

  Field type: progressive

  Aspect: HD 1080 anamorphic (1.333)

  Audio:

  Codec audio: uncompressed

  These are the main settings, that I've been fiddeling. I understand that I can probably do with HDV 1080p25, but I'll have to change my puts predefined custom rather than PAL DV widescreen like this again this is a permanent export in a 'box '?

  Thanks to all who can help.

  EDIT:

  Just to add, I tried to use HDV 1080 p with dimensions of 1920 x 1080 and it exports with audio, but I then encounter another problem. The field of in the video opens is 16:9 and yet the 'video' restores inside 4:9. I changed my appearance to D1 / DV PAL screen 16:9 wide, but it's not "worthy" my video in these dimensions.

  John T., nailed the issue. This ARTICLE goes into a bit more detail.

  Good luck

  Hunt

• Adobe Premiere Pro CC - imported audio problems

  Hi, I ve had with audio problem. Tutorial I ve recorded (video)... It s mp4 audio and video in a clip. When I play in windows media player, its OK. But when I want to edit in Adobe Premiere Pro CC, audio is a few seconds behind the clip... And when I want to fix it and pull it forward, his lack at the start and bad at the end. I don't know what to do, please help!

  ---

  Jiri Pechar

  Is it a screenshot of your computer? And if so, the program captures the fact as a framer-variable rate (VFR) or constant rate (CFR)? Many screen capture programs are VFR, which PrPro doesn't work with. If this is the case, you will need to download a program like the freebie of the hand brake which allows you to transcode the footage to the CFR, then use in PrPro.

  Download page for handbrake:

  https://handbrake.fr/downloads.php

  Neil

• Export the sound problem

  On Win 7, I have a Cp CS6 project with 11 slides. Each slide contains audio. The audio files are in the library in the form:

  Audio text 1

  Audio text 2

  ...

  Audio text 11

  1.

  When I opened Audio-> Audio management and try to export audio from here (simple or all at the same time), it will appear a dialog box asking me to choose a folder. I chose an empty folder. Then a dialog box appears, asking whether to replace existing files (with options Yes / Yes to all / no / not at all). No matter what I want, nothing is exported. The folder is empty as before.

  2.

  Second option is to go to the library and export from there. If I select all the audio files 11 and right click and click Export, then choose an empty folder and export, the following files are in this folder after export. There are only 4 and strangely named.

  Text to Au.mp3

  Text to Au.wav

  Text to Aud.mp3

  Text to Aud.wav

  3.

  Third option is to select a single file in the library and export it. And this works as expected - it creates a mp3 or wav file. However, the export one is inconvenient because:

  (a) the window "export as" does not remember the folder previously chosen, so whenever it is necessary to choose the root folder

  (b) the window "export as" does not remember the mp3 format, so 2 pairs click every time

  Is there a method to make Captivate allows multiple audio export at the same time? Is this a problem with Captivate in general or only with my file or a workflow?

  I think that this question is on the same line as your other question TTS.

  What is happening on this project only? The error and export thing?

  Instead of the import library, try to copy with audio sldies to the other project and export of the other project?

  Certainly you can export several audio files of the library, is basically able to export to two forms of compression MP3 and WAV.

  and it is referred to as the audio text # (with number.)

  Thank you

  Anjaneai

• Audio problems in Movie Maker

  I have audio problems with windows movie maker, my speakers are on & works with itunes that do I do? The sound is not muted and if I go to youtube or I can listen to the music from itunes, but when I try to watch a movie that I created in windows movie maker, it plays, but just with no sound... Also, I can't play instrumental music files (which are downloaded) in a movie instead, I did being able to hear mp3s, I downloaded & I used to be able to play in a film I've done... I have no viruses either so I need to know what the problem is... I have antivirus protection & it automatically gets rid of the virus if I computer, so this isn't the problem, please HelP!

  Movie Maker has compatibility issues with. MP3 files...
  It may be worth trying to convert the. MP3 files to the
  . Format WMA before you import into Movie Maker.

• No option to import/export in the contacts folder

  My CONTACTS folder has no Import / Export options display. However if I create a new folder under the folder CONTACTS these options are there in this new folder.

  If I delete the CONTACTS folder, create a new folder and rename - no still no import / export.

  If I right click in an empty space in the right pane of the CONTACTS folder as suggested on the Microsoft site there is no "customize this folder" as I am told to wait.

  It seems that there is only a permit CONTACTS folder and deleted if its properties are lost - but reappear in any regeneration. Weird.

  Any help welcome.

  Problem solved.

  I had a shortcut on my desktop in my contacts folder.

  I deleted the contacts folder and the new subfolder.

  I created a new folder under my user name and renamed him CONTACTS.

  I then consulted the file to the shortcut on the desktop and... LO AND BEHOLD the import / export options are back!

  As I had a recent .csv file I imported which and I'm now a happy chappy.

  Thank you very much

  Dave S

• Low audio problem Windows 7

  Hello

  This is my first time to a post here, so I'll get to the point.

  So, recently, I just had a virus on my laptop, everything is resolved except my audio problem.

  I had to go into "Safe Mode" while the virus was LURKING in my laptop, I had deleted some unwanted files

  It comes from the virus.

  ACCIDENTALLY, I deleted half of what was in my "common files" folder witch was located in:

  C:\Program Files\Common Files

  I have still a few other folders inside this folder... I used to have a lot, and I think that some of them were important.

  Only after that when I rebooted my computer, I realized that my audio seemed low. (My volume was 16% and it is always

  the volume loud enough and perfect for me).

  Also, YES, I tried the troubleshooting method everyone does, and it is always at low volume.

  It does not solve the problem. The same day, I caught the virus, it was withdrawn after a few hours, so all is well.

  Well, there you go, that's my problem. Please any help would be appreciated!

  Hello

  Thanks for the reply.

  In this case, I would say that you want to run system restore to recover all the files. After that, if you have any problem of virus.

  Let us know we will certainly help you.

  Refer to:

  http://Windows.Microsoft.com/en-in/Windows/system-restore-FAQ#1TC=Windows-7

  Note:

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I hope this helps.

  Kind regards
  Anusha

• The unit 4.2.1 and call Manager Import/Export

  Is their way to export all the info of config CH and import it into another system of the unit? I have many servers of the unit who have pretty much the same configuration of AA and it would be much easier to import CH configuration on each server. Thank you.

  No, it's not an import/export tool just for managers. You can use DiRT to backup/import configurations all - some dealers make a backup of dirt of a generic facility with many managers to call for the configuration of audio text, but not (other than the default example admin) subscribers and then restore a dirt on new facilities in the area such as their General Manager configurations are present out of the box - this may work for you but is not a 'import' - it replaces the base the entire local system data, it adds not just call handlers to the existing combination.

• Connecting more than one import export even

  Hello

  Is it a good idea (to save time) to run that many imports (against a different database of course) the same value van export files, using import/export utility Datapump?

  I mean from several orders impdp using the same on different databases dump file.

  Kind regards.

  Hello

  I assumed you would be explicitly name the log file for each separate so task would not a problem - you can even separate the log file in a separate Directory from the dumpfiles using the DIR:file syntax - should not be the same directory as the dumpfiles.

  If you tried to use the same log file then they would probably crush each other data or you will get a file very messy - but I don't think that jobs would fail...

  See you soon,.

  Rich

• import/export page

  4.2, 12 c Oracle Linux Oracle APEX.

  I worked a request and had a problem.  I moved it to apex.oracle.com so that you, the experts could see my problem.  One of you did, THANK YOU, and now I want to go back the page assigned to my local workspace.  I tried to export the page and got a sql file on my local machine.  When I tried to import it, I got an error:

  This page has been exported from another application or application in the different workspace. Page cannot be installed in this application.

  
  

  Then I exported the application full apex.oracle.com (an abridged version of my original CD) and it imported successfully to my local workspace.  I then exported fixed a problem page, deleted the page of my original app (there were the same number of page) and I tried to import it.  I got the same error when importing.

  
  

  How to get the beautiful new and well functioning page again in my original application?
  

  HustlingHare wrote:

  4.2, 12 c Oracle Linux Oracle APEX.

  I worked a request and had a problem.  I moved it to apex.oracle.com so that you, the experts could see my problem.  One of you did, THANK YOU, and now I want to go back the page assigned to my local workspace.  I tried to export the page and got a sql file on my local machine.  When I tried to import it, I got an error:

  This page has been exported from another application or application in the different workspace. Page cannot be installed in this application.

  Then I exported the application full apex.oracle.com (an abridged version of my original CD) and it imported successfully to my local workspace.  I then exported fixed a problem page, deleted the page of my original app (there were the same number of page) and I tried to import it.  I got the same error when importing.

  How to get the beautiful new and well functioning page again in my original application?

  Page level import/export using the App Builder is possible between separate instances where the request and workspace have the same ID.

  It can be done in SQL * Plus, or using SQL Developer apex_application_install API, but generally it is easier to simply import the entire application and copy the page between applications. To a page in the application, select Create > new page as a copy, copy the apex.oracle.com application page.

• When I import a video, audio can be moved to the Timeline!

  Hi, I used adobe first for years. and I'm on Premiere pro CC now (on laptop)

  recently (perhaps after an update), I realized that the videos are imported with the Audio icon only (and not in video + audio) and when I drag it to the audio only timeline appears.

  This video shows the problem...

  Adob first CC video problem - YouTube

  the first is updated and the NVIDIA GPU also and the machine is switched on 10 Windows.

  Please help me because I am working on a very important project.

  You have turned off the video track targeting:

  

  Click the V1 to turn it on. It will be blue when switch on.

  MtD

• -Dashboard - content cannot create/delete/import/export dashboards

  Hello

  (1) Just deployed my first instance 2777062 vRops 6.0.2 (master node).

  Connect with the admin user, or any other user, I have create which has all permissions to content, I don't see the create/delete/Import/Export 'Actions' in view 'content-> dashboard.

  The only actions, I see are reorganize/autoswitch, managing analytical dashboards share dahsboars. Add dashboards for the House and remove the dashboards of the home is greyed out...

  In views, reports I see these actions.

  Ask yourself what is the problem, because as an administrator, I should be able to do everything?

  I tried to create a new user with the role of ContentAdmin as well.

  (2) another question: can I create a role in vROps and have it propagated in the global permissions in vCenter Server tab, so I can assign this custom group to users? Seems that the default groups are available in the "Global" section in vCenter SErver.

  Erik

  Hi Erik,

  Please recheck license, if you use a Standard key license, these operations will be unavailable to you.

• project import/export with child components

  We are at ODI 10.1.3.5. We exported again project with children DEV instance components and wanted to import the XML file that was exported in the TEST instance using the synonym INSERT mode. We have some of the interfaces whose names are identical in the different old project instances DEV and TEST. If import us the new XML project file in the TEST instance with synonym INSERT, it causes a problem? What is the best approach to deal with import/export between different instances when the object names are the same between projects? I would be grateful if someone responds with suggestions.
  
  Thanks in advance
  VK

  It is not really important that the names are the same. Each object in ODI is assigned a unique object ID and this is what is used when an import is performed in order to determine the measures taken in the repsitory of the target. As long as this ID does not match an ID that already exists in your target repository, then you will be ok if you use synonym insert, although I suggest using synonym Insert/Update. Part of the object ID is the ID of the repository that being exported from the origin, so as long as you repsitory unique ID across your environments (basic good practices), you should not type any important issue-based.