Import Lightroom 5 function doesn't work at all - tried everything I can think
I have my Lightroom 5 Setup to access a catalog located on an external drive that I connect to my Mac. Eject function children pulled the cord connecting the external hard drive for Mac on without disconnect properly using Mac. Now if I try to import from the camera, office or another device etc., it doesn't matter, error message that "the following files cannot be imported" I tried to reinstall the software and using an old backed up catalog file. Nothing works. Right now my Adobe Lightroom is useless because I can't put more pictures in there, and I'm extremely frustrated. I need this problem
"could not be read" means that you do not WRITE permission for the Destination folder that you are trying to import the files in.
To resolve this problem, you can either
- change the Destination folder to another folder that has the WRITE permission; OR
- change the permissions on the Destination folder for the WRITE permission
Tags: Photoshop Lightroom
Similar Questions
-
My alert on messenger sounds stopped working for no apparent reason. They worked very well and I did not any changes. all the settings are correct.
Sounds still working on the text. Can someone help me please
You have the key "secret" engaged? It is the little slider on the volume buttons on the side. If you see orange, it is engaged. Drag the opposite effect. Have you disturb not active? Settings > do not disturb.
-
Flash does not work. I have tried everything I can think
OK well because the way I typed the question but then had to make an account that I do it again. I have windows 7 32-bit with IE 10. I have problems with the new flash player 11. I tried to install it and under my Control Panel programs it shows flash player 11 active x, under that manage the Tools Add ons section of ie it shows shockwave player object. I received confirmation that my download was successful. What a load of bull because I can and were not able to watch videos on facebook or play games on this site or any other. I am also unable to fill out a job application because it forces me to listen to some audio that requires the player flash work. Help, please!
You have activated ActiveX filtering? Turn off: http://forums.adobe.com/thread/867968
-
The new update of Lightroom 6.4 doesn´t works with my 10.8.5 on a Mac OS. 6.3 Lightroom runs without any problem. Where this is the problem with the 6.4 Version?
You will need to first uninstall Lightroom.
Then, reinstall 6.0 from this link: Install Photoshop Lightroom
and upgrade to version 6.1 of this link: keeping up-to-date for Lightroom
-
touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?
HelloIt's material is not a Windows problems.
/ Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
is a toggle the TouchPad that it is enabled.Check with support of the manufacturer system, documentation online or forums that there is probably
Shortcut keys that enable and disable the touchpad functions.Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.==========================================
If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
only once if the above did not work)Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
on the TouchPad and UNINSTALL.Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET
This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.
The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
http://support.Microsoft.com/kb/310575Then go to the system manufacturer's website and get the latest touchpad drivers.
Download - SAVE - go to where you put it-click on - RUN AS ADMIN.
==========================================
This utility also allows to control the TouchPad:
TouchFreeze
http://code.Google.com/p/TouchFreeze/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. If I go to history > recently closed tabs and click on something, it works, it's just the keyboard shortcut that broke. The other tabs keys work fine.
Create a new profile as a test to see if your profile is the source of the problems.
See basic troubleshooting: make a new profile:
There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.
If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)
See:
-
I bought the live app pga golf, but it doesn't work in my country! How can I cancel the payment for the next month?
There are instructions on this page to manage and stop automatic renewal of subscriptions: view, change or cancel your subscription - Apple Support
-
HP Envy 700-056: cannot get new video card to work tried everything I can find
I tried everything I can find on the web. I bought a new motherboard. I tried 6 different video cards styles and models all different. I recently found a message thread that says the Radeon R7750 worked on the exact same computer so I advanced and you bought it. Still nothing. I did the stuff of all secure boot and legacy stuff and I'm just at my wits end with this dang computer. All other HP I have works with every video card, I tried. Just not this one. What should I do.
V80.52 revision JA2 BIOS date 11/11/2014
Card mother 500-214In fact, I did what you said and did the job.
I took out the card
Reset the BIOS and Windows startup settings
Is off the computer
Turned on the computer and changed the settings of legacy support
Started in Windows and then close
Installed the card and bam, it worked.
Very happy camper here. Thanks for your help.
-
Please help me get the healing brush work tool in my new version of lightroom 6 on my old brand of one iMac. all other functions seem to work
Thank you
Thank you, but I had this problem solved by
Live chat. He finished is not everything
User error. It was a corrupt file of the download of the program.
Sent from my iPhone
-
Have HP 1415 and eprint approx. was connected and now doesn't work at all. Help!
We had 2 iphones to use the application on our 1415 HP eprint and everything worked very well. Now, both do not work. I've tried everything. Note: our printer is always connected directly to the network and we do not use the wireless function. Any help would be appreciated. On our iphones, we see our home wireless network with the network HPCM1415. We tried to connect the two, but still nothing. Any help is appreciated more.
Hi Dslandro,
I guess you have an application that is HP ePrint home and Biz.
I recommend to uninstall the application and then reinstall the application.
Then try printing from the iPhone.
We know the results.
-
On display at the screen doesn't work at all
Well, that's funny... I downloaded from page pilot - HOTKEY software for my R400 with Windows Vista. I installed it, restarted the computer - nothing...
I looked to install dir, and there in the .log file - opned it and that the joke of jokes:
[2009-02-15 11:35:27] We Screen Display
[2009-02-15 11:35:27] "SUCCESS: 'Not installed'-> ' 5.20.01 '.
[2009-02-15 11:35:28] ThinkPad FullScreen Magnifier
[2009-02-15 11:35:28] SUCCESS: 'not installed'-> '2.04'. "so 'Not installed' is SUCCESS... great! BRAVO! ...
I tried to run the install again - it is written, that all drivers are installed - but the display on screen or magnifying glass does not at all.
I tried to uninstall it, restart, then install again... and restart again... but no change - it doesn't work! I'm most update vista, where needs so problem?Hello wdolek,
just a suggestion:
Basic must install the driver interface system, after that installing hotkey features.Maybe it helps.
-
Xbox 360 gamepad does not work on PC, TRIED EVERYTHING.
As the title says, I literally went to every length next to the purchase of a new controller for that to work, I tried for about a month now. I have tried every thing simple that everyone suggested on the forums and here as well. Simply, he doesn't get the drivers. I downloaded them, still are not. He knows it's a joystick, but won't actually run it needs drivers, but they NEVER WORK. I've tried EVERYTHING. It's so hard to play with only one controller.
Hi Erik,
Please contact Microsoft Community.
I understand that you are not able to use the joystick on the computer.
Sorry to hear about the inconvenience caused.
This could be caused due to the following reasons:
Joystick problem.
Installing the driver several blocking drivers.
User profile problem.
Follow the suggestions below and check if this can help:
This link will give you the driver for windows 7. Please choose the good architecture and download it.
This article explains how to connect the game controller to the computer.
Note: you must completely uninstall the previous drivers that are installed on the computer for this game controller.
Please refer to this article where Sharief K responded on December 28, 2012.
Additional information:
You can also create a new administrator account on the computer, and then try to connect the device:
Please refer to this article, this will explain you about creating a user account.
And refer to: my computer is in a workgroup
Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
M176n: No printer function doesn't work on Ubuntu 15.04
I bought the Color LaserJet Pro MPF M176n.
It worked fine in Ubuntu 14.10, but when I upgraded to Ubuntu 15.04 it has stopped working.
None of its functions (print, scan to computer) work.
(Copy still works because it has nothing to do with the computer).
How could I solve this problem?
Thank you for responding.
Hello
I would start by checking that you have the HPLIP software installed and up-to-date.
-
After that our latest operating system updated, our HP Photosmart 6520 had scanning problems. Usually a reboot or as part of the scan on the HP computer would work. Today, I downloaded the latest driver in the hope that could solve the problem. Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility. The print feature works very well. This message I see in the HP utility:
"The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »
I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.
What can I do to get my scanner up and running again? Thank you very much for your help!
Hi @kjnowicki
I want to help you with your scanning device.
We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.
Reset the printing system
- Click on the Apple icon ( ), then click on System Preferences.
-
isLiteral function doesn't work not as expected
We try to use "FILTER (isLiteral(?o))" to get all literal values for a variable particular sparql. It works for normal literal, but it does not work for CLOB values. If I have everything for the variable of the question, I get the following:
O
ORALL154
O$ RDFVID
6940262555896077121
O$ _PREFIX
ORALL154
O$ _SUFFIX
(null)
O$ RDFVTYP
TURNED ON
O$ RDFCLOB
(CLOB_VALUE)
O$ RDFLTYP
http://www.w3.org/2001/XMLSchema#string
Given that the column "O$ RDFVTYP ' specifies 'BED' I assumed that this feature might work. The only option I see is to deny the Yaser function, but this can adversely affect performance. Are there other options?
Thank youHello
This is the expected behavior. FILTER operations are not supported for long literals.
Your idea to use the FILTER (! isURI(?o) &! isBlank(?o)) should give the expected results. Avoid a performance difference significant between the two approaches.
Thank you
Matt
Maybe you are looking for
-
The drop-down-box languages chose is display of pale color that this option is not available. Clicking on it does nothing. In addition, no language appears in the language line. Not being able to use the drop-down-box fact by following the instructio
-
6 s incoming does not display message option calls just to remind me and to lead, to meet
6 s watch just to remind me and to lead, to answer incoming calls
-
Photosmart 7520-e cannot receive fax fax only computers
I tried everything tech support told me to do it so far. Hard reset, unplug the power supply, change fax speed but always that nothing does. I can receive faxes when they come directly from a computer, but when a personal fax machine tries, sending
-
My money me locked out and does not recognize my password or change
new computer, but I have been in money successfully for several days, but today it does not accept my password, and I don't want to use a password anyway cause I never use money online.
-
My screen keeps on growing like.
I tried to find instructions in the Control Panel, but there was nothing to help this situation. I used to have a 'zoom' down button on the right, but he disappeared. I know it's a small problem, but it's very aggravating!