import of .cube read in first/Lumetri

Similar Questions

• I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction.  Thank you very muc

  I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction, I would really appreciate it!

  Normally, I shoot with the 7dmarki and have never had any problems.  After troubleshooting my error message 'cannot open IMG1111 because it's the wrong file type', only the options have been updated plugin raw from the camera, to buy the latest version or uninstall and reinstall.  First train to the plugin to update because it was a leased device.  Thanks again!

  Thanks MichelBParis!  I didn't see where he said to 12 items.  I downloaded the free DNG Converter last night and not had much luck.  It is not recognizing that I have all files in the folder at all.  Don't know what I'm doing wrong!

• Can I load data in imported Essbase cube in OBIEE?

  Hi all

  I use OBIEEv11.1.1.7.I imported Essbase cube in RPD and I load sheet Essbase Excel data using smartview.

  My question is after you import the cube in OBIEE do I still need load the new data into Essbase cube or is it possible to load data directly to the OBIEE to excel for any Essbase cube?

  Thank you

  GP

  
  

  Hi GP.

  Essbase substitution variables can be imported and can indeed be referenced in OBIEE. So I think that you have a solution here :-).

  Thank you

  GEO

• Opportunity the AVCHD file cannot be read by first 12 items

  I currently have 12 items first. My videos are taken on a Canon Vixia 30-28 Mbps. LPCM (59,94 P). First 12 items reads correctly almost all of these files, but sometimes it confuses a file of one minute for a 45 minute - he thinks that the record was picked to 5 frames per second instead of 60 - or something like that.  It's by chance - it happens maybe once in 100 files.

  I think this might be caused by the device or SD card, but any other video software out there reads the file properly - Windows Media Player VLC of Cyberlink Power Director (which I would rather not use). In fact, one of the files that cannot be properly read WAS now correctly read by first items 12 a few months ago (the only modification I know would have been updated to first items 12 and my moving to Windows 10)

  It's really disconcerting to have some random pictures that every piece of software out there seems to be able to read EXCEPT first of 12 items, and to have it occasionally, random files taken-by-side with a whole bunch of good files. In addition, I would like to create a movie with some of the images located in the wrong files. Does this sound familiar to anyone and if so, any advice as to the cause / fix?

  (I already uninstalled and reinstalled first 12 items, no change. I also tried to go directly to the map, rather than first - using Downloader also does not solve the problem).

  Hello

  First 14 elements just came out today.  I bought and downloaded and it reads the files 'wrong' that Photoshop elements 12 cannot read without problem.

  mpopps

• Behavior of the new version of LR 6: even the filter function is powered down to the arrangement of the photographs in the library window depends on the star. It's awful, but after importing the photos my natural first step is a rough chek and

  Even the filter function is powered down to the arrangement of the photographs in the library window depends on the star. It's awful, but after importing the photos my natural first step is a rough chek and rating. When evaluating a photograph it sorts in the order of evaluation, and I have to go to the point that I was check. Please revert to the behavior of version 5!

  Change your sort order.

• Cannot import files (.mov) XDCAM in first for Windows

  Hello.

  I have a problem using XDCAM files in Premiere Pro.

  In fact, I captured the leading XDCAM of MovieRecorder (.mov), which is the acquisition for Mac software... (http://www.softron.tv/products/movierecorder.html)

  The XDCAM file is opened in Premiere Pro for Mac.

  And I can play the file in QuickTime player to Win but I can't import the file into Windows first.

  How can I import the XDCAM (.mov) saved from Mac in first Pro for Windows?

  What do I need to install a codec or program?

  Please let me know all the tips.

  Best regards

  Donnie Kim

  Calibrated {Q} XD decode download

  $150.

• You can import a clip AE for first without going through After effects itself?

  You can import a clip AE for first without going through After effects itself? Or do I need to export the clip of Ae. and if I do I lose quality viable? I want to so other people working on my project, but they have that first.

  Thank you

  By their very nature, the "les «clips» clips" EI means that they have been exported.  So, according to their file format, they can be importable in PR. Lossless codecs are guaranteed to ensure no loss of quality when importing.

  If you mean an Ae composition, the dynamic link requires an installed version of Ae.  There is no loss of quality in a dynamic link.

• read the first character of each line

  Hello!

  I have a problem with the reading of a text file in LabView which I think is pretty easy to do, but since I'm really new to labview (and programming at all) I'm having a hard time to understand.

  So basically, I use the VI 'write file to measure' to write some test results to a text file. I'm just the ones and zeros so the text file looks something like this:

  1.00000

  0.00000

  1.00000

  ..

  and so on.

  I would then import these values in labview but I don't want decimals and I would like that everything on the same line, something like this:

  1 0 1 0 etc etc.

  (the idea is to then be able to convert the values to a hexadecimal number 1-F, if for example the above entry would result in 6.)

  I tried to use the function of text file reading, but I don't know how to convert then the entrance of my desired format.

  Also if you have any idea on how to start playback at the first 1, and then read the next 4 entries contact that would be great as well.

  Any help is really appreciated!

  
  

• Import of video files in first Pro CC

  Hello

  I had this problem since I started using first Pro CC to edit movies ("literal as film ' The Social Network ') and the problem is the following:

  Every time I have import (converted from the mkv to mp4 format) movie file and read it in the power, audio, and video desync gradually. The first good minutes work, but then the sound starts playing before the coresponding video.

  I would really appreciate it if anyone has a solution to automatically synchronize the A / V in the whole movie.

  Thank you!

  Be sure to use a constant pace during the conversion. MP4.

• Problem with importing audio files .mts in first pro cc 2015 project

  When I play the video in preview the audio plays but does not appear when his sliding in the schedule of the project. I had not updated for first pro 2015 and tried and still no audio is displayed. I tried to remove the tray that the audio appears in and re import the images via the media browser and still no sound. I'm trying to start the final cut (after recording some new images in Cuba!) for a documentary that I worked on last year, so I would be very happy if someone could help me on this, its quite frustrating. Furthermore, I have imported .mts, pictures back in August for the same project and had no such problems. I use a 2012 end imac 3.2 ghz, 16 GB 1600 mhz

  Thanks in advance a mil!

  Charlie

  Probably forgot to patch source audio track.

  Adobe Premiere Pro help. Source patch and the targeting of the track

  

• I am in the course of one screenshot simulation captivate in 6 session and then edit it in first pro cc 2014 when I import the video into the first, it's blurred

  Caution - I'm relatively new to adobe captivate and first, so I hope it's a matter of simple adjustment I was not able to understand.  When I do a capture video captivate 6 the output mp4 is very clear.  If I play it in windows media player, it's loud and clear.  If I import this same mp4 into Premiere Pro CC 2014, it is very blurry.  My simulation has gauges and dials which must be clear and I need to "mix" audio sounds, narration and system in this video.  Any help would be much appreciated!

  Hey Korn Check-6,

  What is your resolution of reading on? 1/4? 1/2? Full?

  Thank you

  Kevin

• Adding a RAID card to help speed up the export (and another question reader) in first Pro CC

  First of all, I read the Page Tweakers export section because that is my main concern is. First my questions, then the background and my current and proposed configurations:

  Question 1: Adding a hardware RAID controller, for example an LSI MegaRAID will sufficiently remove the burden of parity management CPU on my RAID 5 software that the CPU will jump of joy and export faster?

  Question 2: If true for above, then compare thoughts on adding smaller SSD for either a RAID 0 or less two RAID 0 volume volume complete HDD RAID 5. In other words, I think the purchase of four Samsung 850 Pro 128 GB SSD to put in a four disk volume to handle everything (projects/media, media, previews, export cache), or split it into two volumes of two disks of each and divide the tasks, or keep the idea of volume four disc and previews and exports on my drive HARD RAID 5 array.

  The 850 are valued at SEQ write: 550 / 470 MB/s so I could get around 2000 / 1500 MB/s read/write to a disk four RAID 0 or 1/2 who, if I divided in two volumes to minimize the volume of read/write at the same time, if it really matters with these SSD?

  The Tweaker page made some comments. A split is carried out the tasks between different drives, rather than a large effective RAID can really slow things down. Because SSDS are much faster than a single HARD disk, I think its more accurate than so I'm leaning towards the configuration of four discs put OS & programs on the C drive, media & projects on media on SSD (2 disks RAID 0) Cache and D (HDD RAID 5), file exchange & Previews & export on 2nd SSD RAID 0 (or combine the two RAID 0 and their functions).

  Just trying to get a point of view here, since I have not bought anything yet. Any experience/stories, I would be grateful.

  My current setup of training:

  My D drive is a software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM hard drives with CrystalDiskMark SEQ read/write of 339 / 252 MB/s.

  The C drive is 500 GB SSD (Samsung 840 (not Pro) and fact 531 / 330 MB/s.) My OS, Program Files and Page file are on C and media data/files/projects, etc. that are all about the RAID drive.

  Problem:

  Current configuration allows for smooth installation, just export seems slow, usually taking between two and two and a half times the video length to export. Thus, a 10 minute video takes 20-30 minutes for export. 15 minute video can take 30-40 minutes to export. The first 10% of the export of re-encoding takes less than a minute (seems fast), but it becomes slower when the final 10 or 20 percent may hang for several minutes as my system is running out of steam. So, where's the waste?

  I activated the hardware acceleration (because the GPU hack my GPU is not listed) and it can break through to 25% use a few times and eat up to 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is slowed down export set. The CPU can boost at 50%, but it seems either too busy.

  Our calendar is simple with two video and two audio streams (a little music and especially the voices), with simple transitions (jump cuts or cross dissolves). Sometimes, we fast correct color, so that could use the GPU? Also, given that we are filming in 1080 P 60 p and 1080 export 29.97 FPS, I think who is scaling and using the GPU. I know that without the GPU, it takes much longer. I excluded buy a faster GPU because it doesn't seem to be breaking a sweat. I just need to know if my system is a bottleneck at the level of the disk hard because I am using software RAID and my disks are slow and hardware RAID will considerably reduce the processor load so it can export more quickly.

  Our files are not huge in nature. Most of our clips are several MBs each. Total files in the project are between 5 GB and 10 GB for each video with Windows Media File export being 500 MB to 1.2 GB on average. Look using Panasonic Camcorders, so the original files are AVCHD, I think (.) MTS files?).

  Considerations:

  1. I think to buy (and future proofing) a LSI Logic MegaRAID 9361-8i is 12 Gb/s SAS and SATA (because some SSD current can exceed the standard 6 Gbps).

  2. I will not replace my current HDD RAID 5 as not in my budget to spend 6 or more large SSD. These discs are more important to me for temporary storage because I delete files saved once. I don't mind a few smaller SSD inexpensive if they can make a significant difference for editing and export.

  I can only guess my RAID HDD is slow but the CPU is burdened by parity. I guess running RAID 10 would not really help.

  My configuration:

  my configuration:

  CPU - CPU i7 - 3930K @4.5 GHz

  RAM - G.SKILL Ripjaws Z Series 32 GB (4 x 8 GB) DDR3 2133 @2000

  Motherboard - ASUS P9X79 WS LGA 2011

  GPU - Gigabyte GeForce GTX 660 OC 2 GB (performed the hack of compatibility list to activate hardware acceleration).

  Drive C - 500 GB Samsung SSD (programs and Windows 7 Pro 64-bit) 840.

  D drive - four 1 TB WD RE4 enterprise hard drives 7200 rpm in RAID 5 software

  Box - Cooler Master HAF X

  CPU fan - Cooler Master Hyper 212 EVO with 120 mm fan

  Power - series Pro Corsair AX 850 watts 80 Plus Gold

  Optical drive - Pioneer BDR - 208DBK

  Thanks in advance,

  Eric

  OK, after overload of information on everything I tried (free), which might be my answer here. I went from codecs to export. When you use Windows Media File, Premiere Pro seems chugging along much slower than when you use the h.264 (not h.264 Blu - Ray). I don't know if it's because Microsoft has found a way to break it or what. But I'm the CPU usage of 70-85% on the 2 Pass of 2 as well as the use of the memory of 40% (or 12 GB). It exported in 14 minutes. Woo - hoo. I then did a similar test using Windows Media File. It took 31 minutes to export. The CPU has spent much of his time in the 30%, especially down in the 1930s mid-1940s with spike for memory usage was only 24% to 35% and 50%. Since then, I've read how h.264 codec is 'plu' for online files. It compresses better with less compression artifacts. He seems better, etc. Well, they both seemed on the same thing for me. I play both on my TV 70 "before I could comment further. In the future, I will consider a RAID controller and upgrade the HDDs to SSDS.

• MTS reading accident first Pro CC

  Hello users,.

  I've upgraded to the latest version of first Pro CC. recently, I noticed that playing MTS files blocking my first session. A window appears that informed me that the application has encountered an error and needs to close.

  Import MTS files brings no question. First only acts upward when I try to read them.

  The MTS files worked in past iterations of first (5.5, 6) so I wonder when this problem appeared.

  Thank you!

  Hi Emoral7,

  Please use the Adobe Forums;

  Please try to follow this:

  http://helpx.Adobe.com/Premiere-Pro/KB/audio-video-glitches-AVCHD.html

  Happy editing,

  Sandeep

• First character left in file by reading the first line in text file

  When you use the function of reading text from a file file, I noticed that the 1st character is left in the file. I read the line correctly.

  When adding a 2nd line this character is in the file.

  Part vi code is attached.

  Any ideas?

  Thank you.

  Elik

  Can you attach a file of real data and tell us what you mean by "first character". The number of characters per line do you have?

  Can you tell us what you see in the modified file and what you expect to see.

  Everything seems good.

  1. Read you the first line and so the file pointer is just after the first line
  2. You set the size of the file at the end (seems unnecessary, because it does nothing). The file pointer is always right after the first line.
  3. You write the first line you read concatenated with a second line. It will be written on the current file pointer, i.e. after the existing line
  4. The first line is in the file twice, as planned.

  Setting the file size to the 'end' on an existing file does not have something useful. If you want to set the position of the file instead?

  Try to set the file position from and new data will be written at the beginning of the file.

• Failed importing clothes fuse "read error".

  So I did some clothes on maya and only this one fails for some reason any with the message below.

  

  I tried the smoothing, cleaning on maya and nothing works. I managed to solve the 'warning' of several groups but I still get the same error, it cannot read the file for some reason any.

  Help me JeanetteMathews

  So, I fixed that, I imported the Mudbox obj and I tried to export from there once again, this time, the error message was different. Fuse was told that the obj was no UVs for some reason any. So I used a planar mapping in maya:

  

  That solved my problem. Just put it here in case someone needs a solution.