import of task or

Similar Questions

• How to import a task from a file XML?

  I created a scheduled task in Windows 7. The task runs perfectly on my computer.

  I also exported the task in an XML file and you want to create the same task on another computer automatically. How to import the XML file with pragmatism in the Task Scheduler on the second computer?

  Hi Chathurangabandara,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you want to import a scheduled task from a XML file on another computer. I'll be happy to help you in this problem.

  You can import a task, which will add the task imported to a task folder and allow you to use and perform the task. A task properties, triggers, actions, conditions, and settings are represented in an XML file.

  I suggest you follow the steps in the link to import the XML file and check if it helps.
  Import a task
  http://TechNet.Microsoft.com/en-us/library/cc722156.aspx

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Import tasks and Menus

  I just wanted to confirm that there is no way to import / export tasks and menus except using LCM. If there is a way made me know

  wrong forum

• Problem of tasks

  I have a problem with the program.  I imported my tasks to my Treo 680 using my computer.  I have updated and reorganized the, but I'm not getting one of those dated appears as suffering (when they) unless I intentionally put them in suffering.   Even those that is due today are not displayed.  Another thing: it would be really nice to be able to have a screen that organizes things right today. But for now, I'd settle right on it work correctly.  Any suggestions?

  In fact I reset the phone and it works now.

  Thank you

• TASK CORRUPTED IMAGE

  I tried to follow the previous ways to solve the problem above, but I have no idea what I'm doing.  I bring the file regedit.exe on screen and he brings in about five places to change, but I have no idea what they are doing.  Can we run that Windows 7 give me a guide step by step to solve this issue.  Like many others, I installed Windows 10 but it has caused the loss of files, programs, etc and I started Windows 7.  Everything seems to work as before except the backup.  I'm smart enough to know that you don't do anything to these small animals unless you know exactly what you are doing.  Help.

  David

  It would be useful that you would post you see the exact error message.

  It would be useful that you describe exactly what you're doing to cause the error to occur.

  This seems to be a problem with back to Windows 7 after a 10 upgraded Windows.

  If I were you, I don't want to read through the pages of 10 + people things 'train' to get this work and may finally get a solution.  I think that if I subject continues without resolution of more than two pages, it has run amok.

  I have this problem, never seen but after having read about it (thanks to Frederick long notes) later, created these notes so I helped someone else with him and you can tell me if they are not perfectly clear, and I will change them.

  Click on the round of departure and in the enter task scheduler (or control panel, tools of Directors, scheduler of tasks), then go to the folder that contains the Windows taskbar:

  

  Go to the bottom and click/Select/highlight the WindowsBackup folder:

  

  Then in Task Scheduler, you can see the tasks related to the safeguarding of Windows and these two in blue is those that are usually achieved and should be replaced:

  

  To replace tasks afflicted, you need to have good copy tasks unafflicted can you get another computer that is running Windows 7 or you can download copies of my OneDrive which is here:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84! 2368 & cid = EC673DF6F8DFEE84 & group = 0

  When you look at files on OneDrive and depending on your browser you will not see the extension of. XML on the files.

  You need these files called:

  AutomaticBackup.xml

  WindowsBackupMonitor.xml

  Download the two files to your desktop or somewhere, you can find them and don't forget to save them with one. Plugin XML:

  

  Switch back to the Task Scheduler, make a right click the afflicted of tasks (or AutomaticBackup and monitor backup Windows) and remove them (you could click with the right button on each task and export a place sure if it is your desire):

  

  Now you should see that they have been removed and need to be replaced:

  

  In Task Scheduler, make sure the folder WindowsBackup is still selected, click Action, import and one both navigate there where you backed up the files you download and import each and click OK:

  

  After you import both tasks, your Task Scheduler should show the two tasks and look like this:

  

  You can see the new tasks and they have never been executed to allow you one (such as Windows Backup screen) right click and choose to run it... Wait a few seconds and press F5 to refresh your screen and look at the last run time and the last result run:

  

  That looks pretty good.

  The AutomaticBackup task will take more time to work so you can test it when you have time.

  If the properties of tasks (duration, frequency, etc.) are not to your liking, you can adjust.

• Script to wait for Clone task is completed

  Good day, as part of the post, I run a command that enables the NIC and sets the right Port-Group of cloning process. I put a sleep command in each environment is diferrent, so I find myself always change this duration of sleep because the cloning process does not end in the time of sleep and the rest of the script fails. So in order to get rid of the sleep control that I want to capture the CloneVM_Task and pass this parameter to wait-task that will force the completion of the ClonVM_Task. I could just make sure no other tasks are running but this task, but as we all know that alays can't be the case. So that's what I did.

  I begin a deployment of FVO to have an another long running task. Then I run the script.

  If ((Get - PSSnapin - name Vmware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null) {Add-PSSnapin "Vmware.VimAutomation.Core"}

  # Virtual Center details
  $server_address = "MYvCenter name" or IP

  SE connect-VIServer-Server $server_Address - user username-pass password - WarningAction SilentlyContinue

  
  #Create Master VM Templates
  #
  # Here we import the CSV file with the account information and he piped in a Foreach-object
  # Creating a Variable that imports the csv file that contains all data of the virtual machine

  CD "e:\Scripts.
  $InputFile = import-Csv "E:\scripts\mycloneinput.csv".
  $InputFile | {ForEach-Object

  $ip = $_. VM_IPAddress
  $GName = $_. VM_Guestname
  $TName = $_. Template_name
  $HName = get-VMHost "myhostname" # 1 first Select
  $Desc = $_. Description
  $Dstore = $_. Datastore_Name
  $Spec = $_. Customization
  $Folder = $_. Folder
  $Sfolder = $_. Subfolder
  $NIC = $_. NIC
  $NIC_Lable = $_. NIC_Label
  $Gateway = $_. NIC_Gateway
  $SubnetMask = "255.255.255.0".
  $DNS1 = $_. DNS1
  $DNS2 = $_. DNS2
  
  Write-host "creation: ' $GName
  Write-host "template name is: ' $TName

  # This takes variables and creates the virtual machine
  Get-OSCustomizationSpec $Spec | Get-OSCustomizationNicMapping | »
  Game-OSCustomizationNicMapping - IpMode UseStaticIP - $ip - $SubnetMask subnet mask - DNS IpAddress $DNS1, $DNS2 - DefaultGateway $Gateway
  New-VM-name $GName - location $Folder - model $TName - host $HName - $Dstore - $Desc Description data store - OSCustomizationSpec $Spec - RunAsync-confirm: $false
  
  #######################################
  #Waiting for cloning process to finish.
  #######################################

  $$$ Under notes show a little history of how I got to this point.

  $$ Note1: the first attempt, I just captured running tasks and their past to the task pending. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  $$ Note2: so I added the If Else loop below that failed, because $RTask never equaled only CloneVM_Task, but was a table of two.

  $$ Note3: I tried to us below to separate the two tasks to help

  # $RTask = get-task-status running (who captured the two tasks running)

  # $Array = $Rtask.Split("") (Errored with the method call failed because [System.Object []] contains a method named 'Split'.)
  # So I tried to divide the table like this. ForEach ($Task in $Rtask.Name - Split("")) {Write-Host "my tasks are:" $Task}

  
  Get-task-status Running | Export-CSV "E:\scripts\Current_Tasks.csv".
  $InputFile2 = import-CSV "E:\scripts\mmca\mmca_Current_Tasks.csv".
  $InputFile2 | {ForEach-Object
  $RTask = $_. Name
  Write-Host "current task is: ' $RTask
  IF ($RTask - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $RTask
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $MyTask
  }
  Else {}
  Write-Host "no cloning process is executed.
  }
  }
  
  # This allows the NIC and set the correct Port Group
  Get-VM-name $GName | Get-NetworkAdapter-name $NIC | Together-NetworkAdapter - NetworkName $NIC_Lable-confirm: $false - StartConnected $true
  
  }

  When I run the present, I get the following:

  # #This shows the task start Clonning #.

  erverId: /[email protected]:443 /
  Status: running
  IsCancelable: true
  PercentComplete: 5
  StartTime: 03/05/2013 00:52:13
  FinishTime:
  ObjectId: VirtualMachine-vm-382
  Result:
  Description: Clone virtual machine
  ExtensionData: VMware.Vim.Task
  ID: Work-task-2070
  Name: CloneVM_Task
  UID: /[email protected]:443 / task = work-work-2070 /

  #########################################################

  # #Runs through the tasks running.

  Current task: deploy the model to the FVO
  No cloning process is executed

  # Ignore deploy it task #.

  # #Matches the If statement and continues to process #.
  Current task is: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete

  # #Error #.

  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  E:\scripts\Working_Create_Master_Templates.ps1:71 tank: 24
  + Wait-task-task < < < < $RTask
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  $$$ Under notes show a little history of how I got to this point.

  Note1: The first attempt, I have just captured tasks currently running and pending their past to the task. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  NOTE2: So I added the If Else loop below which failed because $RTask never equaled only CloneVM_Task, but was a picture of two tasks.

  Note3: I tried to use the following to divide the two tasks:

  $RTask = get-task-status running (who captured the two tasks running)

  foreach ($Task in $Rtask - Split(""))
  {
  {Write-Host "my tasks are:" $Task}
  IF ($Task - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $Task
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $Task
  }
  Else {}
  Write-Host "no cloning process is executed.
  }

  
  }

  # #Output the little script above #.

  Current task: deploy OVF model CloneVM_Task
  My tasks are: deploy
  My tasks are: OVF
  My tasks are: model
  My tasks are: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete
  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  Online: 11 char: 24
  + Wait-task-task < < < < $Task
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  I'm new to Powercli and I've scoured Google for a possible answer. I thought I might have a solution that has been published on the VMware PowerCLI Forum, but I couldn't get this to work. Any help would be greatly appreciated.

  #########################################

  I wasn't worried about how to tasks where splits, unless I was trying to follow the import fo the OVF, so that the script went into the loop If and as one of the names for CloneVM_Task then he Treaty. But I got the same error I did in the last version of the above script. That's why I have the version curent thinking that if I exported and then imported the tasks it might make a difference.

  I'm new to Powercli and would like a little help. I am either very close or by a mile off. :-)

  Thank you

  Mitch

  Why don't you store the the task object that is returned when you use the RunAsync switch?

  You can create a loop around the State and wait until the clone job is done.

  $task = New-VM -Name MyVM ... -RunAsync 
  
  while($task.ExtensionData.Info.State -eq "running"){
    sleep 1  $task.ExtensionData.UpdateViewData('Info.State')
  }
  

  The big difference with the Wait-job cmdlet, it is that this will allow you to perform additional work in the While loop.

  Waiting-task the cmdlet waits just until the task is finisned and you can not do anything else.

• Problems of duplicate user name

  Hi, can anyone help?

  I created a user profile for myself. a young parent created one for him and ended up using my user name. As a result, I found myself locked out of my side (and files, photos, mail etc.).

  I found a solution I thought that can work (Ctrl + R at the start), who took me to the welcome/choose your language screen.

  The choice of restore from Time Machine and choosing the date at which restore to go gave me a window, stating that no backup not found.

  I guess that's because the computer is blocked in the new profile and my backups are all related to my original.

  I know that I probably went back a step or two too far to try to solve this problem, but we are where we are.

  Suggestions very welcome.

  Post edited by: cgareth

  OS X should not allow the parent to create a new profile (alias user account) with the same name - it just does not support. You can have similar "long user names" but the "short user name' must be unique, the short name is used for the most important system tasks that allow connections to work etc. Your home folder is named after the short name for example. I have to wonder if he was able to delete your account, but that seems unlikely. Were you the only user on the system?

  Try to connect to an account with your own password, see if you are simply confused between accounts.

  If you can identify yourself as the user with the password to see if you can check the Setup accounts in ' System Preferences > users and groups. It can give you something to go to decide your next steps.

  Time Machine should not care that you were once the user - it must list the backups of the ENTIRE system, so it looks that you do not have all those valid for the restoration. I would say avoid this restoration until find you what is happening. You can disconnect and put the TM drive side for now, just to keep them safe.

  I think you have a few options...

  1 reset passwords via the recovery mode.

  2 reset the operating system in a State that can allow you to make a new admin account, and then use this admin account to search and solve the problem (your data will remain in place, assuming it exists currently).

  3. see if others have better ideas.

  Please try a normal start and try to connect any of the available users, if all else fails, we can consider some of the other options.

• First life of load and battery

  So I played around a bit with my new Sansa Sport before full charge (settings and copy music). Now, my question is: how important is supported first before you do something with the device? What effect do not have a full charge first of all does the battery life these days?

  I'm not aware he does (in other words, it is a question) - but manf. tend to note that a device load first before using it, probably because it is unclear how much load a particular device can have the opening of the box and the manf. would not want the feeder down when for the first time in service or in the middle of some important initial task (for example, an update of the firmware).

• Screen resolution keeps failing at 800 x 600

  Hi all

  I have a PC with Win7 and a nvidia card which can be supported up to 6 screens.

  At the moment I have only 3 monitors all Dell U2312HM 23 inches), tied in extended mode.

  Generally, I choose the resolution 1920 x 1080, but whenever I re - start the PC, the monitors are to dual status and all in resolution 800 x 600.

  I tested the latest drivers, but still have the question

  I swapped the monitors and still have the question

  Someone at - it ideas?

  Thank you very much

  NIC

  Hello Nic,

  Thanks for posting your question on the Microsoft Community.

  I appreciate your efforts to try to solve this problem. Please let us know the following information so that we can help you further:

  You did changes to the computer before the show?

  As you already update the latest drivers for the video drivers. You can refer to the suggestions provided by DaMned PC replied Du6janvier 22, 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-changes-screen-resolution-on-boot-up/13c17468-0d70-4827-A559-dca0fa558a69

  Important this task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope the suggestions in the help of the link above.

• removal of the grabber program v forum

  How can I completely grabber v windows 7 profesional

  Hello

  Method 1: See the Microsoft site

  Review the information in the Microsoft site mentioned below

  http://support.Microsoft.com/kb/2438651

   

  Method 2: Try to manually remove the program

  Step 1: Remove the registry program

  a. click Start, type regedit and press enter

  b. find the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall key

  c. find the program and right-click on it and click on delete.

  Important: This task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click the following article.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  To restore, just right click on the file saved and click on merge.

  Step 2: Remove the program file

  Navigate to the location where the program is installed and remove it

  To do:

  Go to C-> Program files-> locate the program folder and delete it.

  If it's a 64-bit computer, then there will be another folder in Program files (* 86). If you have installed the 32-bit version of the software and then find the folder in this location.

• Migration control

  I remember seeing an earlier version of SQLcl which included an order of migration.

  We work on the automation of our database change scripts and could have been useful.

  I don't see this command in the latest version.  A I imagine, or if something has taken its place?

  This isn't in SQLcl (sql.exe), but rather of the SQL Command Line Interface (now called via sdcli.exe) developer who predates SQLcl: http://www.thatjeffsmith.com/archive/2013/07/sql-developer-4-0-and-the-command-line-interface-cli/

  Here is the list of features, it manages currently in 4.1.1.

  C:\Tools\sqldev411\sqldeveloper\sqldeveloper\bin>sdcli help

  Features available:

  basket: basket set of tasks of databases

  DBA: DBA basic batch tasks

  format: import utility task

  Migration: Migration of databases jobs

  reports: Reporting of basic batch tasks

  UnitTest: Unit Testing batch tasks

  utility: utility import job

• See 6.2 Windows 7 Ent 64 bit fails to close some users

  This has the effect of leaving without a virtual office because view reports thtat they are currently finishing the session.

  I was able to watch the event log remotely and I found this:

  Log Name:      Application
  Source:        Microsoft-Windows-EventSystem
  Date:          12/18/2015 4:59:15 PM
  Event ID:      4627
  Task Category: Firing Agent
  Level:         Warning
  Keywords:      Classic
  User:          N/A
  Computer:      62-002.OBFUSCATED.local
  Description:
  The COM+ Event System timed out attempting to fire the Logoff method on event class {D5978630-5B9F-11D1-8DD2-00AA004ABD5E} for publisher  and subscriber .  The subscriber failed to respond within 180 seconds. The display name of the subscription is "Explorer". The HRESULT was 80010002.
  Event Xml:
  <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider Name="Microsoft-Windows-EventSystem" Guid="{899daace-4868-4295-afcd-9eb8fb497561}" EventSourceName="EventSystem" />
      <EventID Qualifiers="32768">4627</EventID>
      <Version>0</Version>
      <Level>3</Level>
      <Task>18</Task>
      <Opcode>0</Opcode>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated SystemTime="2015-12-19T00:59:15.000000000Z" />
      <EventRecordID>39306349</EventRecordID>
      <Correlation />
      <Execution ProcessID="0" ThreadID="0" />
      <Channel>Application</Channel>
      <Computer>62-002.OBFUSCATED.local</Computer>
      <Security />
    </System>
    <EventData>
      <Data Name="param1">80010002</Data>
      <Data Name="param2">Logoff</Data>
      <Data Name="param3">{D5978630-5B9F-11D1-8DD2-00AA004ABD5E}</Data>
      <Data Name="param4">
      </Data>
      <Data Name="param5">
      </Data>
      <Data Name="param6">Explorer</Data>
      <Data Name="param7">180</Data>
      <Data Name="param8">
      </Data>
    </EventData>
  </Event>
  
  
  Log Name:      Application
  Source:        Microsoft-Windows-Winlogon
  Date:          12/18/2015 4:57:14 PM
  Event ID:      6005
  Task Category: None
  Level:         Warning
  Keywords:      Classic
  User:          N/A
  Computer:      62-002.OBFUSCATED.local
  Description:
  The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
  Event Xml:
  <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider Name="Microsoft-Windows-Winlogon" Guid="{DBE9B383-7CF3-4331-91CC-A3CB16A3B538}" EventSourceName="Wlclntfy" />
      <EventID Qualifiers="32768">6005</EventID>
      <Version>0</Version>
      <Level>3</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated SystemTime="2015-12-19T00:57:14.000000000Z" />
      <EventRecordID>39306348</EventRecordID>
      <Correlation />
      <Execution ProcessID="0" ThreadID="0" />
      <Channel>Application</Channel>
      <Computer>62-002.OBFUSCATED.local</Computer>
      <Security />
    </System>
    <EventData>
      <Data>Sens</Data>
      <Data>Logoff</Data>
      <Binary>00000000</Binary>
    </EventData>
  </Event>
  
  

  Any ideas what is the cause?

  We kept stands and open a support request. The operating system or applications that complaint to VMware. No help there. They wanted to create a few key additional reg which were already OS built in default values. More we already had 1 AutoEndTasks value AutoEndTasks

  What are the ones they suggested we add, but they are of no use, even if you change the default value.

  https://TechNet.Microsoft.com/en-us/library/cc978614.aspx

  https://TechNet.Microsoft.com/en-us/library/cc978624.aspx

  I put a little of these "logout" in maintenance mode, rebooted force them vm and then RDP had in them and looked at the event logs. In any case, this event was present:

  " Winlogon notification subscriber takes a lot of time to handle the notification event (Logoff)."

  Solution:

  Create a scheduled task with a viewer of custom event trigger that queries the data table EventData. With the help of event ID alone is not enough for opening and closing of session have the same event ID of 6005. You can probably use the COM + with "logout " instead. Use an action that reboots the machine, this restart toured by telling the connection to the server that the session is over, and it will get deleted\recomposed. Im not sure if there is any loss of profile but at least the user can log in now to another virtual machine. Here is the XML that you can use to import the task, it has a 2 minute delay that could probably be left out. :

  Restart if logging fails with sense and logoff "Data.xml" event

  
  
    
      2016-09-30T09:31:03.3167339
      NT Authority\System
    
    
      
        true
        <QueryList><Query Id="0" Path="Application"><Select Path="Application">*[System[Provider[@Name='Microsoft-Windows-Winlogon'] and EventID=6005]] and *[EventData[(Data[1]='Sens') and (Data[2]='Logoff')]] </Select></Query></QueryList>
        PT2M
      
    
    
      
        S-1-5-18
        HighestAvailable
      
    
    
      IgnoreNew
      true
      true
      true
      false
      false
      
        true
        false
      
      true
      true
      true
      false
      false
      false
      false
      P3D
      7
    
    
      
        cmd
        /c shutdown /f /r /t 0
      
    
  
  

• FM10 RH9 any book in the form of HTML files

  Hello

  I have 4.0 TCS and TCS 3.5. The current issue only happens with FM10-RH9 TCS 3.5 combo.

  When I import the book FM10 in RH10, the files get saved in the folder of HTML files (topics) of project manager pod instead of the project files folder. If I was a little surprised, I bit ignored this issue initially because it was not me who touched somehow.

  However, when I tried to generate the sequence of go, despite selecting 'All files' and self-creation of the sequence to browse through the table of contents, I get of the subjects of the two files. There is no problem with the table of HR materials that I generated using the file TOC FM.

  These two problems are related? Help, please.

  The import of the book to RH10 FM11 works perfectly.

  Anthony

  I test a settings.isf file and document the procedure for FM converstion HR and shortly after the import of tasks all the way up to the published WebHelp output. As some of my colleagues have not upgraded to 4 CHT, I want to make sure that the ISF file and my procedures mentioned in my document of guidelines hold good for 3.5 TCS so.

  Furthermore, I come to know the button toggle Project Manager to change folders of HTML files in the project files folder. Thus, the issue of the sequence editor to browse is due to something else.

  What could be?

• ScheduledThreadPoolExecutor with minimum and maximum thread

  Hi all
  
  I need to implement something that is planning a number of potentially important small tasks over time. I would use a pool of threads to do this in an effective manner. I wish to have a configuration, for example, 1-10 of discussions where the threads are created as needed and if the number of threads max is reached, tasks are queued. The tasks are timed and repeat if I prefer the automated programming of the executor. The deployment environment and the number of tasks to manage will vary so adaptation of configuration and execution is important. When there is no work, I would like to scale down over time as well. Here is my small tent to reach a suitable with competition from Java API design...
  
  Now, looking at my options, it seems that ScheduledThreadPoolExecutor is a good match for my needs. So what I would like to implement is a mechanism to define the minimum and maximum number of threads that are created for the thread pool. I understand that it is the number of threads of"base" and the maximum number of threads in the java.concurrency terminology. However, I struggle to create what I would.
  
  It seems to me that the ScheduledThreadPoolExecutor is always created as a fixed size thread pool. So I can't set that I would have say minimum of threads 1 and a maximum of 10. There is the setMaximumPoolSize() method, I can call on the executor, but he seems to have no effect. If I create my own ThreadFactory, and use that to give me track when new threads are created, create a ScheduledThreadPoolExecutor with one set of threads 1, fixed the limit 2-wire and plan a set of 6 ongoing tasks in loops, it never starts higher than 1 threads. So it seems that it completely ignores the setMaximumPoolSize().
  
  There is the option to call allowCoreThreadTimeOut() and setKeepAliveTime() on the executor. When I look in the code of ScheduledThreadPoolExecutor, I also see that he prestarts always all discussions until number of threads core set when a task is scheduled. So even if I got the coreThreadTimeout and keepAliveTime for work, attributes that can not help me because it would always just he hike up base number. Otherwise maybe I could use that have a 0 min and max of the number of"basic". Or is the coreTimeOut for some other purpose?
  
  Well, the question of the "base" here is, is it possible I could create an executor who creates a number dependent threads according to the need (between x 1 and x 2 that I would define, for example, 1-10) but achieved x 2 at the start of the queue of tasks that come? It seems that the whole API is to assume I want either a fixed number of threads with the unbound queue or an unlimited number of threads with a queue bound. No way to have a set bounded discussions with min and max thread bodies, as well as the queue without terminals when the max thread count is reached? And can I get that with ScheduledThreadPoolExecutor enough, please?
  
  Or maybe I'm just the idea of simultaneity just bad here for somewhere? Is a kind of best practices of competitive access to pigs immediately the maximum number of threads, you think you might need later conflicts of resources? This is why there is only the size of the "fixed"? In all cases, ideas and help is appreciated.
  
  Well thanks for reading this far... and all answers of course!

  Yes, this particular scenario is difficult to achieve, and Yes, it seems that the standard behavior for me as well. You can sort of achieve this effect by using the feature "allow core of timeout threads. Basically, build you a pool of 'fixed' size with a queue boundless, but the flag 'allow the kernel thread timeout' set to true. This will essentially give you what you want, except that the 'min' size is 0. This seems to be a reasonable compromise to me because you do not need to write custom code (I had already implemented a scenario you describe, a queue of unlimited blocking which 'lies' to be full until the maximum pool size is reached).

  example:

          ThreadPoolExecutor executor = new ThreadPoolExecutor(maxPoolSize, maxPoolSize,
                                                               60L, TimeUnit.SECONDS,
                                                               new LinkedBlockingQueue(),
                                                               threadFactory);
          executor.allowCoreThreadTimeOut(true);
          return executor;
  

• Import rules of mgr cala does not create an audit task entry

  Our listeners ask when and responsible rules in HFM.  When selection rules boy, nothing comes.  Where can we provide this connected info import rules through calc Manager?

  Hello

  Depending on the version that you are, you may be able to use the work to review the tasks of EPMA. You should be able to find information in this location. In addition, if you version 11.1.2.3 and you do a right click on the application in the library of the Application, you will be able to see the history of the deployment rules and metadata.

  The database tables appname_data_audit & appname_task_audit are initially requests that the system runs when you select the task check and the order data verification.

  See you soon,.

  Thanos