First life of load and battery

So I played around a bit with my new Sansa Sport before full charge (settings and copy music). Now, my question is: how important is supported first before you do something with the device? What effect do not have a full charge first of all does the battery life these days?

I'm not aware he does (in other words, it is a question) - but manf. tend to note that a device load first before using it, probably because it is unclear how much load a particular device can have the opening of the box and the manf. would not want the feeder down when for the first time in service or in the middle of some important initial task (for example, an update of the firmware).

Tags: SanDisk Sansa

Similar Questions

  • Battery plugged in but no load and battery life which is at 0%, but the battery is 89-90% charged.

    I have a laptop gateway that I bought last year.  It runs Windows Vista Premium (64-bit), and recently it has been send me load/battery indication problems.  The battery becomes a burden, but the battery monitor does not indicate correctly.  I watched it one day and it loaded up to 89-90% and then the battery monitor indicated 0% and not charging.  When I restart the laptop the charge indicates correctly around 89-90% and will show correctly when it is plugged in.  Once he reached 89-90% charge once again it comes back to life 0% battery and plugged in and not charging.  I tried the battery re - learn and when it reaches the level of 89% it stops and shows a surge of battery, but if you restart the pc it will state the cost of 89% and act normal.   I tried the procedure that I saw on this site earlier with the functioning of the battery all the way down and let the pc "die" on its own, but that still does not work.  Is there a problem with the software in the package of windows vista power control?  I saw at least another person having the same problem but have seen no response or resolution for this.  It is not the connection motherboard problem because the thing is load and works normally except when, if you try to load up once he reached that magic level, it indicates a 0% charge and plugged in and not charging.  I have signed up for a profile on this site and have been typing this message with remaining 0% battery Xantrex battery life reading.

    Question resides in the BIOS. I MD26 series laptop Gateway and has been facing the same problem.

    Download the latest BIOS for you series laptop, update your BIOS and you are done. I found the BIOS of my laptop to this place

    http://support.gateway.com/support/drivers/GetFile.asp?ID=24427&DSCR=gateway%20MD24%20and%20MD26%20BIOS%20Version%209A10h%20For%20Windows%20Vista&UID=290186182

    Hope that solves your problem.

    PS: Please download the BIOS that is related to your computer laptop model/series only. I am not responsible for any damage to your motherboard

    -Patricia

    I am what I am...

  • Satellite P300 - questions of recognition of load and battery

    I have two laptops P300, a PSPCCA-0C502H and a PSPCCA-05Y01Y. One had a hard life and the battery is dead. It was still used for a long time after that, while being connected at all times. The 05Y01Y was mine and the battery eventually would last only 15 minutes. I bought 2 new batteries not authentic to them, but none of the batteries will not charge the original batteries included Tosiba.

    It makes no difference that the Toshiba 2 or 2 batteries no authentic that I use or 2 laptops I use, I get the same result. When a battery is made and then the power supply is plugged with the laptop turned off, the battery light is solid orange. After about an hour of charging the battery light starts to blink. If I turn on the laptop where the battery led is a solid orange Vista said "plugged in, not charging" or "not connected" and the battery light starts to blink.

    If I unplug the power of laptops will continue running on batteries (batteries not Toshiba for nearly an hour and work only Toshiba battery for 15 minutes) until the dish dead. When the laptop is off, I can plug in the power and charge the battery until the light starts flashing when I have to unplug the power supply and then reconnect it to restart the load. I was not able to get fully charge them the batteries.

    I've updated the BIOS that I had read that it can fix the problem, I uninstalled Microsoft control method battery and scanned for changes, I tried cleaning the contacts on the laptop, I tried to turn their removing the battery and unplugging them for a period of time, but none of them seem to work.

    It seems odd that the two laptops are doing the same, unless it's a common problem which I hope someone has the solution.

    Hi Berallan,

    I hit the same problem as you are. I have two new batteries more original toshiba battery and it still does not support.

    I use Windows 7 64-bit. Initially, I thought it was the old battery, and Windows 7, but now it seems that the laptop itself.

    Very weird!

  • Loading and removing responsible

    I have the following text in a movie of an image:

    aa_btn.addEventListener (MouseEvent.CLICK, faa_btn, false, 0, true);

    function faa_btn(e:MouseEvent):void {}

    var mc:scrolltexta = new scrolltexta();

    MC.x = 390;

    MC.y = 410;

    addChild (mc);

    }

    bb_btn.addEventListener (MouseEvent.CLICK, fbb_btn, false, 0, true);

    function fbb_btn(e:MouseEvent):void {}

    var mc:scrolltextb = new scrolltextb();

    MC.x = 390;

    MC.y = 410;

    addChild (mc);

    }

    When I load the second movie, it loads on top of the first.

    Is there a way to remove first something is loaded and then load the new film?

    In addition if I continue to by pressing the movie it keeps loading most instances. Is there a way to limit it to a single clip by clicking?

    Thanks for any help.

    A better approach might be to place the child in a movieclip/sprite container and check if the container has no children and if yes remove the child depui the container and in this case it null before adding a new...

    var mc: *;

    var container: Sprite = new Sprite();

    addChild (container);

    aa_btn.addEventListener (MouseEvent.CLICK, faa_btn, false, 0, true);

    function faa_btn(e:MouseEvent):void {}

    removeExistingFirst();

    MC = new scrolltexta();

    MC.x = 390;

    MC.y = 410;

    container.addChild (mc);

    }

    bb_btn.addEventListener (MouseEvent.CLICK, fbb_btn, false, 0, true);

    function fbb_btn(e:MouseEvent):void {}

    removeExistingFirst();

    MC = new scrolltextb();

    MC.x = 390;

    MC.y = 410;

    container.addChild (mc);

    }

    function removeExistingFirst (): void {}

    If (container.numChildren > 0) {}

    container.removeChild (mc);

    MC = null;

    }

    }

  • My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

    My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

    First of all, stop plugging him. Then, make an appointment at the Genius Bar at your local Apple Retail Store or contact Apple to arrange for your sent phone service.

  • Pavilion g6 overheating and battery life

    I will have questions recently about the life of the battery of my laptop, I expected has something to do with the overheating constant, even if I clean the vents often enough and never overwork and only Dungeon it oh surfaces planes. I am at a loss at what could be wrong.

    Hello andrea9013,

    Welcome to the HP Forums! I hope you enjoy your experience!

    I understand that the computer is overheating and battery problems. I apologize for the inconvenience, but I'll do what I can to help you. First and foremost, please try the steps in this document: reduce the heat inside the PC to prevent overheating

    If these steps do not help, please provide the following information:

    1 the model number of the computer. If you need help to find this information, please see this site: find the model number of the computer

    2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

    3. have you installed new hardware on this computer, before the problem appeared?

    4. have you installed new software or drivers on this computer, before the problem appeared?

    Thank you for choosing the HP Forums. Have a great day!

    Mario

  • is it not possible to load the game and load the battery other than through the xbox?

    Original title: play and charge

    I just buy a play and charge kit, it is said that it should be charged for 8 hours the first time, that I do not like to leave my xbox on 8 hours, I thought I could use one of these USB plugs that allow a device to be charged using a wall outlet, but I don't get all the lights on the controller No red light to show that the load, then is this not possible to load the game and load the battery other than through the xbox?

    Hello

    You can post the question here for assistance: http://forums.xbox.com/xbox_forums/b/xcsblog/default.aspx

  • Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

    Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

    Please you not to Apple here. This is a user forum.

    Try som battery tips to save:

    Battery Saving Tips for your beloved iPhone

  • The first tab in my browser always showed the loading and cannot close it, why?

    When my browser is open and having several tabs open, the first tab has a lively circle that shows the page loads, and if I try to close this tab it does not close. I tried uninstalling and reinstalling but have not been able to clear up this question, Please help!

    • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
    • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

    • Makes no changes on the start safe mode window.

    See:

    If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

    • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
    • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • When I open a program that takes a few seconds to load and open another program while I'm waiting, it will automatically put the first window on top

    When I open a program that takes a few seconds to load and open another program while I'm waiting, it will automatically put the first window on top when it has finished loading.  How do I not do?

    Hello

    Unfortunately, it is not possible to change that outside of the modification of the order in which the programs open.

    If you have feedback or suggestions, you can express their opinion on this at:

    http://connect.Microsoft.com

    It will be useful.

  • I have just downloaded/subscriber to photoshop and paid the annual fee.  Following purchase, my very first time to load the Client creative Cloud, the app closed and will not reopen.  I can't locate the original location of the purchase binding, so now I'

    I have just downloaded/subscriber to photoshop and paid the annual fee.  Following purchase, my very first time to load the Client creative Cloud, the app closed and will not reopen.  I can't locate the original location of the purchase link, so now that I'm just try the 'free download' option.  Still crashes the Client Creative.  I upgraded to Yosemite.  Same thing.  There, anyone have a suggestion for me?  Thanks in advance.  Frustrated and at $119.

    Login on Adobe.com with your user ID and the password manage you account to see if your subscription is here. If it's usr Adobe cleaner for the installation of the creative Cloud Desktop application.  It allows to download, install and enable you to creative cloud applications.

    The Adobe Creative Cloud Cleaner tool allows to solve installation problems

    Download Adobe Creative cloud apps | Free trial of Adobe CC

  • VGP-BPS9/S - how long this battery will run without load - and,

    Greetings!  I need to replace my VGP-BPS9/S.  Can you tell me how long this will be opertate without load, and is there a replacement so that I can buy that will last longer?  If so, what is it please.  Thank you.

    The model is PCG-5K1L.  Thank you!

  • Microsoft Office Word 2016 and battery drain

    I have a macbook with OS X El Capitan air and recently installed microsoft office 2016, noticing a huge difference in my battery life.

    I use my macbook to 100% of load and have use of 2-3 days at the office until the next recharge... because the office installed 2016 that s is no longer possible, I have to recharge every night, and somedays carry my charger and keep once connected to continue working.

    It seems that the issue is Word 2016, because excel and powerpoint work as usual; but since the word is the program used mostly I noticed the issue and he has seen a few posts about this in the internet.

    Is it possible to get around this? Every walkthrough? Any bug fix any? Is anyone else noticing this same thing?

    Please answer.

    You might have more luck to post your question to the forum of MacBook Air space or a space Microsoft forum. This forum area is for the 12 '' MacBook of the retina.

  • IPhone 5 s having trouble of load and keep a load.

    I have an iphone 5s that have load and maintain a load. The phone has been supported very well, just drain very quickly (a few hours from 100 to nothing, even when the phone was not in use). It has been like that for a while, but now he began to have trouble loading. If I plug it, it takes a long time (30 min) to go the red icon to turn it on, once it turns on the charge phone is about 7% and comes up with an error message that the cable is not supported (ive tried different cables, the range of original apple cables), from here it drains just at 0% in 15 minutes. Any thoughts?

    Here is what I tried:

    First replaced the battery (strong battery of my 5 c that holds a good charge)

    Restarts and factory reset

    loading port (nothing there) cleaning

    updated to the latest version of the software at the time (8.4.1)

    I'm experienced with iphones and I'm comfortable, replacement parts if needed, at this point, the phone won't stay long enough to do a lot of DIY software, or any discount to itunes. Any ideas would be great!

    Sorry, but I am afraid that we cannot help you here. According to Apple, the users are not supposed to open and their services devices. The only place where you can get help would be 3rd part repair facilities who could diagnose your device, or other forums like this, for example.

    As you open your device, Apple or an Apple authorized Service provider no longer not a maintenance operation.

  • Satellite P10 - 792 lock ups / crashes and battery

    I used my P10 792 even since I bought it 3 years ago. S there was a decreasing battery box that appears on my screen (sometimes) say I should replace the badly inserted battery and restart my computer. If there is also a problem mouse touch pad. He touchpad doesn't respond well to orders while he was trying to move the pointer.

    The battery alarm message usually comes with the dysfunction of the touchpad. I have to press ESC to restore the touchpad back to normality and close the application of process Btrychkr.exe under the menu CTRL + ALT + DELETE to make the gibbous Moon box to disappear.

    But the main and most recently problem are blockages, especially when running programs that require a video grand advanced such as 3D games and DVDs. The screen freezes for several seconds, and then he comes back to life. This is sometimes followed by a sudden stop down.

    Finally, when I try to turn it on, it doesn't even get to loading windows before it stops again, and so on. So I have to wait several minutes before pushing on the button again. Now, we have reached a critical situation where the computer won t last more than 10 minutes before its shutdown automatically without notice. There is no error message so I don't see what is the cause of the problem. (Battery? Overheating?)

    It is also important to note that one of my friends with a series of P10 also had these same problems and finally had to buy a new one because the laptop has been just the hand. I fear me comes with the same situation of m.

    How can I solve this problem?
    I would really appreciate the help.
    Thank you

    Hello

    You you use laptop for 3 years. You replace the battery during this 3 years?
    Isn't it? I think it would be a good idea to replace the battery.
    Usually after about 500 times of loading and unloading procedures the performance of the battery goes down and the life time decreases

    Additional during those 3 years, the laptop needs to be cleaned. Fans suck dirt and dust and sometimes cooling modules cannot turn with maximum performance and can not cool the CPU and other devices.
    Of course, the overheating could be a reason for your shutdown problems

    Looks like you haven t much experience so I think someone with more experience (technician) is recommended to clean the notebooks cooling modules

Maybe you are looking for

  • upgrade to El Capitan and I wanted to use AHT

    I have a Macbook Pro running 10.7.5 and wanted to move to El Capitan.  I got a response and a part of it said to stop, restart and hold down the d key to get AHT to run and are looking for hardware problems before I update.  Well, I did it and I fina

  • What does the green check mark when you change the info from an average of song?

    I imported an album in ITunes, I bought on Amazon and for some reason, adjust the volume slider is all the way up to + 100% on all of his songs. Whenever I try to change this back to normal, a little green check mark next to it. When I click on it, i

  • Mess up my laptop recovery CD

    I had a massive malfuntion with my laptop, and I had to format and reinstall windows. After running the recovery CD, nothing at all. I used the windows XP my PC disc to install windows, but of course, because it was not the real disk to my laptop, th

  • Tecra M5-388: Question on the Chipset

    Is identical to the M5 T2400 chipset on a new tecra M5 - 388 (T5600)? We created an image for the M5 T2400 PTM51E 02S01REN, but now they'll end of line I need to know if our existing image will work on the replacement of M5 - 388 (T5600) PTM51E-0N805

  • Satellite A100 (PSAA9A) - sound doesn't work - tried all of the obvious solutions

    I have a satellite A100 (not sure the model, but the model is PSAA9A-00S00F) The sound does not work, but I haven't used the noise for about 7 or 8 months ago.Mute is not on, all volume controls are ok.There is only the internal speakers.I downloaded