Problem of tasks

Similar Questions

• USB-6212: software problem timed task of analog input

  Hi all

  I have unexpected behavior using a USB-6212.

  The code example shows that when I run in sequence two analog DAQmx to task, material entry first a timed, the second software timed, it happens that the first readings of data are all wrong and have the same value for all channels.

  The labour code is the following:

     GetCtrlVal(panelHandle, PANEL_HW, &Switch); 
  
      if (Switch) {
  //
  // First Task: read 10 rows of values with hardware timing
  //
          DAQmxCreateTask("", &htAI);
          DAQmxCreateAIVoltageChan (htAI, MX_DEV_AI, "", DAQmx_Val_NRSE, -10.0, 10.0, DAQmx_Val_Volts, "");
          DAQmxCfgSampClkTiming(htAI,"", SAMPLE_RATE, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 1000);
          DAQmxRegisterEveryNSamplesEvent (htAI, DAQmx_Val_Acquired_Into_Buffer, SAMPLE_RATE, 0, RefreshCB, NULL);
          DAQmxStartTask(htAI);
              Delay(1.0);
  
          DAQmxStopTask(htAI);
          DAQmxClearTask(htAI);
      }
  //
  // Second Task:read 10 rows of values with software timing
  //
      DAQmxCreateTask("", &htAI);
          DAQmxCreateAIVoltageChan(htAI, MX_DEV_AI, "", DAQmx_Val_NRSE, -10.0, 10.0, DAQmx_Val_Volts, "");
          DAQmxStartTask(htAI);
  
      for (i=1; i<=10; i++) {
          DAQmxReadAnalogF64(htAI, 1.0, 10.0, DAQmx_Val_GroupByChannel, AcqVoltRow, HW_AI_CHANNELS, &read, 0);
          SetTableCellRangeVals (panelHandle,PANEL_SOFT, MakeRect(i, 1, 1, HW_AI_CHANNELS), AcqVoltRow, VAL_ROW_MAJOR);
          Delay(0.1);
      }
      DAQmxStopTask(htAI);
      DAQmxClearTask(htAI);
  

  A picture is worth a thousand words: analog inputs have been connected to a network of resistance have known values.

  The upper table contains timed material acquisitions, the lower the software timed readings... as you can see it the first line is the set of values of 0.13, totally wrong

  If the task of timed acquisition of software runs without the earlier (in my demo, that this can be achieved by the switch at the top right), the readings are correct!

  

  Y at - it something I am doing wrong?

  I also tried to run the program on USB-6009, but it seems to work properly.

  [LabWindows/CVI 2010 SP1 - driver OR-DAQmx 9.4 - Windows 7 x 64]

  This problem was corrected by NOR-DAQmx 9.5

  324044 NOR USB-621 x task HAVE request returns incorrect data after erasing a task HAVE stamped

• problem with tasks scheduled on W2008 (physical) servers. We run W2008 R2 Standard.

  We have a task that runs a .bat file that takes backups offline to a database for a product of part 3.  Run us it everyday (except Sunday) so we have the setting of relaxation as weekly and mark all days except Sunday and run them at specified times (or it is our intention);

  .Bat file commands have been verified as correct by the 3rd party software vendor.

  If you run manually scheduled task (that is to say do a right click and run) it works and does what we want it to do.

  What we cannot operate constantly, it runs on a timed schedule. It works at the time and the first time, as it did successfully, the action subsequent times it works at the agreed time but shutsdown almost immediately after, it seems, made the first order in the .bat file that the database has been extinguished.

  We noticed that when it is not what we want, he said that he has successfully completed, but the status is not (0 x 1) (0x0), but we are unable to find clues in the history of task as to why.

  We tried two ways to call the .bat file:

  1. directly by briowsing in the file in the Actions tab field program/Script and then by filling in the path in the start menu in the field

  2. in referring to the cmd.exe file in the C:\Windows\System32 folder, and then put the following command in the \D:[path/c to the file beats] in the field add Arguments

  both behave the same way. Its very relative because this task is a task of office off and so impossible to manually run operationally, it must work outside office hours.

  We had this task that runs in W2003 years and we are trying to move to W2008 as part of a program to upgrade.

  Someone encountered this or know how to diagnose why its happening? We would really appreciate help.

  Hi Marc,

  The question you posted would be better suited on the TechNet forums.

  Please post the question here:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• calendar of the incorrect passport problems of task-settings

  mine appears to have never run to the computer to run slowly, have gone through the process - entered a confirmation password password, press on apply responds with access denied 0x80070005, I guess I have the incorrect word passport so far is too to mount the system to get the schedule job tasks

  If you see a message like this:

  The specific error is 0x80070005: access is denied.

  There is a way to substitute it, but this isn't a good idea to get around this without a good reason.

  This error means that the account that you assigned to the scheduled task either does not have a password, or the password you entered when you set up the ST is incorrect.

  You can assign a password to your account if you want the task to run under your account, or create a new account with a password just for your STs.

  If you want to use your account and your account has no password, assign one and use it for your STs.  You can still have XP automatically log on you so you must enter your password every time.

• Last updated 15/09/2010, white problem Vista task bar and comes into conflict with McAfee

  After a recent automatic update of microsoft windows (10 updates) my taskbar is white and the options in the presentation to return to the colours of vista disappeared, also my real time analysis disabled McAfee.  I restored my laptop updated before updates and reinstalled updates five times and the same problems appear.  I have now the option turned off completely updated.

  Restarting the computer seems to have solved this problem.

  Read this: http://social.answers.microsoft.com/Forums/en/vistawu/thread/03aee0e9-af74-4024-b279-94bdb9a13ebf

  ... and the following links given by the moderator Support Ms.

  Since you already did system restore, I advise you to disable McAfee and run Windows Update.

  P.S if you're open to the evolution of your AV, consider using Avast or Microsoft Security Essentials - both are FREE and are effective.

• problem of task - perfect spot in the world is not working properly

  recently, I downloaded a game pc... a perfect world it works fine on my laptop but not on my desk... when I try to start it, a message window appears that I can't read... and another thing on the patcher works not properly...

  any suggestions?

  Visit the website of the provider of the game.  http://www.PerfectWorld.com/ seems to be a good place to start. Brian Tillman [MVP-Outlook]
  ------------------------------
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Problem with task bar and appearance of the start menu.

  My account is the only account on my computer of the family that seemed to have lost the look of Windows Vista in the start menu and taskbar, as well as the windows that appear. It seems to resemble an earlier version of windows, but with the arrows and vista available, wait his gray. I went into the control panel to see if I had changed it accidentally, but he says he's still the appearance of vista. What happened since I restarted the computer the other day, and it's really frustrating.

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Does anyone else have problems with tasks dashing ACS box

  This is the second time that I applied a patch ACS to one of our boxes of ACS SE 1113 only to happen in an unusable state. Today, I applied patch level 4.1.4.13.7 4.1.4.13.11. I used the GUI to apply the hotfix. Now most of the services will not start. Restore does not work. It seems that he will again have to be reconfigured.

  I was wondering if anyone else has had this problem. Maybe I should have used the command line to apply the patch?

  Randy

  You must apply CSUpdate first, then the patch for 4.1.4.13.7

  Kind regards

  Prem

  Please rate if this can help!

• Problems with services of automatic startup after Windows Update problem

  These are probably related to many things I tried trying to solve the problem of Windows Update - until I found the answer to Fix It.  That fixed my Windows Update, but now I have these problems.

  I tried to run the bat file that Sohail suggested in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/41f1d01e-e787-479b-83de-c66f40a23a37/
  He ran with errors, so I suspect he undid some things and then they don't get put back.

  Those that I know I need is:
  Windows Audio
  DHCP client

  These two begin very well once the system is in place, but I have to do it manually.  They still claim to be automatic when I view in the Services management tool.

  I also noticed that the following services are set to automatic but have not started either.  Is this a problem?
  Task Scheduler
  TCP/IP Net BIOS Helper
  Windows event log
  TPM Base Services

  So, how do you restart automatically?

  Problem posted in another thread to improved Performance.  Long story short - a repair settled with Vista DVD.   He fixed the problem of services, but the problem of Windows Update is back.

• your task manager has been disabled by your administrator ".

  Since my desk top I press CTRL, alt, del, and I get the message: "your task manager has been disabled by your administrator". It's my personal computer, and I am running xp professional. How to activate it?

  See if the following article solves your problem:

  ""Task manager has been disabled by your administrator"error message.
    <>http://support.Microsoft.com/kb/555480 >

  HTH,
  JW

• Please I have task manager does not work on my system

  problem: the Task Manager

  error message: your task manager is disabled, contact the administrator

  Hello

  Please see here: http://support.microsoft.com/kb/555480

  In this case, after the changes, this message comes back, then it means that you're dealing with malware that defines this new policy.

  In this case, please perform a scan with your antivirus software (make sure it is up-to-date before you scan with it).

• Press and hold Ctrl/Alt, then press on delete, and select Start Task Manager, and then the small black box appears and then disappears.

  Press and hold Ctrl/Alt, then press on delete, and select Start Task Manager, and then the small black box appears and then disappears.  How can I fix the Task Manager?

  Hello

  See if that helps you.

  "The problems of Task Manager.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  See you soon.

• Somehow, I deleted the Task Manager. Pressing on Ctrl.Alt.Delete no longer works.

  Original title: remove the Task Manager.

  Somehow, I deleted the Task Manager and now when something stops responding and I have to turn on and back! Pressing on Ctrl.Alt.Delete no longer works! How can I get it back?

  Hello

  This should help you.

  "The problems of Task Manager.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  See you soon.

• Why a scheduled task in Windows 7 is hidden?

  I'm migrating from XP to Windows 7. I moved a scheduled task that worked fine in XP in the Windows 7 environment by recreating the work in the new scheduled task manager calling from the same batch (.) CMD file). In the general tab of the task properties, the hidden checkbox is not checked. The CMD file works normally (visible) if started from a window or explore CMD prompt.

  When the task is started by Task Scheduler, it runs hidden. The CMD window is not visible, and the user interface of the program it's running (a backup program) is not visible. Processes are listed in the Task Manager, and they are run under my username (not the SYSTEM or LOCAL).

  Can someone explain why this task is hidden running, and how can I make it visible?

  Hi timg11,

  All the scheduled tasks run hidden?

  The user interface for Task Scheduler (IU) is a snap Microsoft Management Console (MMC) that replaces the scheduled tasks Explorer extension in Windows XP, Windows Server 2003 and Windows 2000.

  To display hidden scheduled tasks, follow these steps:

  1. click on start. In the search box, type Task Scheduler. Then, in the list programs, click Task Scheduler.
  2. on the view menu, click Show hidden tasks.

  See the link below and refer to the section tasks hidden demand that describes scheduled tasks hidden:

  Description of the scheduled tasks in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/939039

  The above article is for Windows Vista. It remains valid for Windows 7, too.

  If you are having problems scheduling tasks or for tasks to be performed correctly, first make sure that the Task Scheduler service is running. You can check that the service is running if you click on the Start button, select Control Panel, click System and Maintenance, click Administrative Tools, click Services, and check the status of the Task Scheduler service is started.

  See the links below for more details on Task Scheduler and the same diagnosis:

  Overview of Task Scheduler
  http://TechNet.Microsoft.com/en-us/library/cc721871.aspx

  Schedule a task
  http://TechNet.Microsoft.com/en-us/library/cc748993.aspx

  Troubleshooting Task Scheduler
  http://TechNet.Microsoft.com/en-us/library/cc721846.aspx

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• "The selected task... no longer exists" for almost all tasks (Win7)

  I opened the Task Scheduler in Windows 7 the other day and received dozens of separate messages, telling me that the tasks no longer existed. This included not only those that I created myself, but also for programs installed and crucial tasks of Windows System. The Scheduler is running and knows the names of tasks, such as confirmed by the command line.

  I looked at the entrance to register TaskCache and it seems that only 4 tasks remain in it - a random selection that includes one of McAfee, two Google Update and Windows Defender. No other tasks that have xml files in the task (C:\Windows\System32\Tasks) folder are listed.

  I read that these errors can be resolved by emptying the jobs directory of all files except those appearing in the registry and then re-import all the. I tried this for a single task that I created myself, and it succeeded. The fact for all tasks would take a very long time, but there is another problem: the Windows themselves tasks do not appear in the registry and I can't move or delete the Windows subdirectory under the task (C:\Windows\System32\Tasks\Microsoft\Windows) folder, even when I start a cmd as administrator session.

  Any suggestions or advice welcome. Thanks in advance.

  Hello

  Thanks for posting your query in Microsoft Community.

  Important: problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  In addition, it seems that you use several security software. Windows Defender is automatically disabled when using any 3rd party security software. Thus, the problem you are having, could be due to a conflict between the 3rd party software.

  Step 1: Therefore, I first suggest you put the computer in a clean boot state and check if the same behaviour arises.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Step 2: Please refer to the suggestions in the help of TechNet support to solve problems in Task Scheduler.

  Troubleshooting Task Scheduler

  Step 3: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.