Import of word in InDesign doc

Similar Questions

• Had to remove imported rule of the word to InDesign

  When I imported a text into InDesign CC, a built-in ruler came and I can't get rid of it (I tried in Word, also). Any ideas? It was placed above a note.

  Check parameters document reference options...

• How to import the Word document into inDesign?

  I tried to import the document into inDesign (CS6) but the import has failed. 35 pages of DOCX ended up in a block of text on the first page. Other pages are blank.

  How to adjust the import document and get a block of text per page without overflow of text?

  

  Hold the SHIFT key when you click on install. It will be "automatic formatting" to all pages and create new ones if necessary.

• Lose notes when you put the word in InDesign

  Hello world

  Me seems to have a problem that has been discussed before, but there is no adequate response with a real solution.

  When the import (place) a word (.rtf) file, some of the notes are misplaced, namely the number of the note looks like a spuare with a pink highlight, while the text of the note is moved to the next note, lost notes of their proper location.

  Does anyone have a solution? Many have had this problem, but I couldn't find any real solution.

  Hi Tim,.
  just a quick note to give you all of my love for this tip.

  I saved my document in word that you said and suddenly all my notes have been nicely imported into my inDesign doc (cc 2015.4).
  You saved my night

  Thanks again!
  Antoine

• Why does reference refers to duplicate import from Word?

  Hello - I am importing a Word document with notes, and exhibitor numbers duplicate themselves. Where there should be a superscript "1" so it is an "11" Exhibitor - using Adobe InDesign CC Mac OSX 10.9.5 2014.

  I can edit in story editor, one at a time and erase the numbers double, but there are hundreds of them.

  Thank you

  Grace

  Then, try this!

  

• How to place a multipage PDF document in a multipage InDesign doc?

  I know how to put PDF files in an InDesign document, I know not even how to place a multiple page PDF in an InDesign doc. My question is how do it automatically so that for example I have a 100 page PDF letter size doc and I want to put in an InDesign doc letter size of 100 pages with one or two clicks. Preferably I could tell him (The InDesign doc) where I want the x / y coordinates of each page so good (that I don't have to go back through 100 pages and set in InDesign.

  Someone has an answer for this? Much appreciated!

  Eric

  InDesignSecrets"Blog Archive" Zanelli releases MultiPageImporter for importing PDF and INDD files

• How the "automatic formatting" a very long word in InDesign?

  I try to insert/import/paste text in InDesign. The text contains a few - strings of text (or "words") with more than 3000 characters. This causes InDesign to have in excess of text and is not not be able automatic flow of the text.

  When I import (or paste) the text I am shift + click on (I have also tried option + shift + click) to of the auto-enchainement downwards along the pages, but the automatic flow stop on page 16 (where the 'words' long begin to occur), although my file contains more than 200 pages. I get the little red sign below in the last text box, which indicates that I have overset text.

  I tried then click the Red sign and continue the flow of the text on the following pages, but I find myself just with text boxes empty on the following pages, each time I try click on the Red sign.

  I removed along 'words' and tried again and now InDesign doesn't seem to have a problem with my text. If the problem is caused by the long "words."

  The text format is not important (I tried .rtf and .txt) and InDesign is able to recognize both.

  I can not however, insert spaces or end of line in these long 'words', since we "words". The number of characters in each 'word' is important, and if I start to add extra spaces or end-of-line charecters he would change the "words".

  I have a lot of places in the text where I have these long 'words', and I would avoid too much clicking and inserting to work around this problem.

  I am running InDesign CS3 on a Macintosh 10.5.8

  I would be grateful if someone has an idea how to work around these.

  Thanks in advance for your time and help

  My suspicion is that they are, in fact, nonbreaking hyphens, but I hope that the OP can enlighten us.

  I must say that some screenshots can be useful, too.

• Import of Word list

  Work on:

  I am importing the word text in my InDesign document. The original file is made up of questions and sub questions which the latter are indicate by a list indicating 'a' (Question 1, a, b, c,...). The final product is an indesign document with the same structure of list.

  Problem:

  When I import the text from Word, new lists (including new styles which I have indicated) follow the original order of counting (each question has its own set of sub-questions). Word is now putting a lot of stuff allong with the import so I would only get rid of the "waiver". Because I work in a large document, the best way to do 'selects all of the text", then use" replace clear "in the pane menu. It works fine, also the fact that all the sub-questions are now regarded as being part of a "fixed" list Everything I try, I cannot get rid of this and return the State preferred lists: a list by issue.

  Question:

  I tried all the options available in the palette of style under "paragraph style options"), although I have problems understanding the levels in the list. I guess a requairement should be only him "restart numbers at this level after...". "must bechecked. What I can see, is that the drop-down list offers a long list of "Word imported # the list." As I see it, it contains specifications of the word list.

  My question is: How can I get my separate list without having to do a deed of your time by selecting each list? I want to either solve this problem in the style options or the Word document.

  I'd appreciate an idea!

  AlienJoeri wrote:

  I tried your suggestion of Ctrl + 6, but without any result whatsoever.

  There is Nothing? It's quite a surprise. (You're on Windows? On a Mac, I guess that's Cmd + 6, as usual. Did you actually select all the text, as I mentioned?)

  AlienJoeri wrote:

  .. The thing is that I need all the styles incorporated into the Word to be there document for import into InDesign (5.5). ... Conversion of text to clear is not an option for me.

  This converts the automatic bullets and numbering in plain text-"clear" in this sense, it is normally entexte, not 'ordinary' as "unformatted".

  AlienJoeri wrote:

  What bothers me, is the fact that the initial import DOES contain the right list, when I start to clean things, it disappears and I have no idea on how to get it back or the separate individual lists.

  Well, if import staff works for you, you can always try one of these two:

  1. in the Word Import Options dialog box, set ID convert bullets & numbering in plain text.

  or

  2. right after importation, and above all, all pick and choose "Convert bullets and numbering to text" in the paragraph Panel menu.

• Copy and paste from word in InDesign - foreign characters

  Hello

  I have a Word file using fonts foreign, Chinese, Korean etc.. I have the fonts on my computer because the word document shows them OK... but, if I try to copy and paste the text into InDesign, these characters that either don't watch any or you just get the color pink with small gray squares... Anyone out there has advice for how to manage this kind of situation.

  Thank you!!

  Babs

  Oooh, OK. I get my finger-waving caution.

  It could be a number of different things. I almost always place instead of copy and paste, but I have no trouble copy & paste text of complex script of any sort in any of my different versions and platforms. I figure that there are two different ways - is it something about implementing folds or Clipboard which this (which means it could be decompressed exactly in the same way as any police drop, no complex-script knowledge required) or there is something about the no Latin text itself that causes the problem. Take a look at the Clipboard (Edit-> preferences-> Clipboard handling) settings to see if these settings solves the problem by changing the settings of plain text for example.

  If this does not work, I would say showing a lot more detail. Platform, versions of Word and Indy, the specific policies are a failure, a description of the way styles are implemented in the current Word and Indy docs, maybe a sample of the doc Word and Indy zipped and made available for testing (for example if I can successfully copy and paste in the RFSO when your username cannot) (, there is something wrong with the installation of the user), and so on. Without such information, the best I can do is take random speculation.

• Import from word - headings not crack as in kb7

  I used to import a Word document manual RH7. RH7 was able to split large documents into usable to topics pieces. 8 HR, I can't get to import the entire document. The requirments are the table of contents page do a link to specific areas in the document set with headers up to and including level 4. We must eliminate as much scrolling for the user as possible.

  When you import, you must indicate to HR where to create the topics based on

  your styles in Word. Search for a Word change settings button on the import

  dialogue - this is where you can see a list of Word styles & then use

  the field 'paging' to indicate this style must trigger a

  divided into a new topic. I do the same kind of thing when you pull my

  FrameMaker HR docs.

• Import the Word document

  I am trying to import a Word document. Created new HTML document with open design view. When I pull down on file/import the only options are "XML in Template" and "tabular data". If I'm going with, I cannot import a Word doc. There is no option for a doc Word could either not be hidden somewhere? Using Mac OS X 10.3 and Dreamweaver MX 2004 (version 7).

  > There is no option for a doc Word could option not hidden
  > somewhere? Using Mac OS X 10.3 and Dreamweaver MX 2004 (version 7)

  http://www.Adobe.com/support/documentation/en/Dreamweaver/MX2004/dwusing_err
  ATA/dwusing_errata8.html

  Importing Microsoft Word and Excel on Mac documents

  "The documentation that omits the file > import > Word/Excel Document.
  command is available only on the Windows operating system. You can copy and
  Paste the contents of Word and Excel documents, but you cannot use the import
  native features of Windows operating system".

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• Import of Word 2002 RoboHelp HTML 5 problem

  I'm obviously a beginner and it's very basic, but it drives me crazy. Import of Word documents is no longer works. I use Robohelp HTML 5 - project of Webhelp, Windows XP, Office XP (Word 2002). Last month, import a document Word has worked (well after that I cleaned up everything in Word first). NOW when I try to import a Word doc (with headers preserved, auto creation of styles OR nothing checked) I get a dialog box warning stating "Microsoft Word seems to be unresponsive. You want to continue waiting for an answer? "Of course he never does this loop. Word opens with an empty Document1 and "Converting * .doc" present in the taskbar. It is not locked, but it does not end import either.
  
  I have now reinstalled MS Office twice and Robohelp 4 times (I forgot to disable the antivirus protection once, I did not edit the file RegEdit first and even tried with disabled once ADSL modem). Unfortunately, I did a few things because it did not work properly. I've updated the RAM in my computer and I got DSL high speed internet (Yes!) ... which shouldn't have been a problem. I'm not so sure about the addition of a working group and tent unsuccessfully to set up a network for your laptop's internal wireless. And then... drum roll... it is the thing of Pando. No programs installed, but the music and movies downloaded. I did uninstall Pando because I believe it was working properly eventually, but not positive.
  
  Sorry to write a book. I've read countless messages but not finding what I need. Hope someone can help because I am alone in my very small business using Robohelp or trying and I don't have anyone to ask. Adobe will support not 2 versions back and what I read on Robohelp 7, I'm afraid to upgrade. I appreciate any help!
  
  Thank you
  Debbie

  No, it is important that HR is installed last.

  Where is the Normal of Word template installed?

  It is important that Word is run once after installation before trying to work with HR.

  Should not alter a scope but change the security settings for Word for average rather than the default value of the height.

  Corresponds to the Word installation standard installation on your PC, nothing unusual?

  Tell us more about Pando, and why you think that this might be relevant.

  Which firewall do you use?

• import of rtf in indesign paragraph styles have a strange symbol next to them

  import of rtf in indesign paragraph styles have a strange symbol next to them. What is the average of symbol?

  

  Not the styles are very well. It's just an indicator of the user interface. Styles will act normally and save with the model.

• RoboHelp 2015 won't let me import a Word document

  People,

  I just install Robohelp 2015 (version 12.0.0.306).

  When I try to import a Word file to create a new project, it fails, and I see the message:

  "The import Word Document Wizard cannot locate a supported Microsoft Word version. Please install Microsoft Word 2000 or newer. »

  But I use Word 2016.

  What is a known compatibility issue?

  Thanks in advance,

  MAM

  Hello

  You may ensure that you have applied the latest service releases to RoboHelp. Simply click on the file tab, then help and finally updated.

  

  See you soon... Rick

• How to import a word document

  How di import a Word Document into my movie

  Convert to JPG

  First import Formats html 0 http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800