Import OVF to Local computer to vCloud Director

Similar Questions

• Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

  I am trying to import a virtual machine (composed of three .mf, hard, .ovf files), when I try to download the VM, it gets downloaded 100% in the catalogs, but gives an error "Cannot create" as condition to the end and when I check the error in detail, it gives me that "operations is not supported on the object.". Checked the Virtaul Center, I get the same error that 'operations is not supported on the object."in the taskbar. Google it a lot but could not find a relevant solution.

  Just for the record I have DRS activated in full auto mode and only in the aggressive State.

  Can someone help me what I can do to remedy the problem.

  There are two parts to the upload.

  5.5 download dialog box represents the progression to the record of transfer vCloud Director of the FVO.  The download method is via the integration of Client plug-in (which uses the OVF tool).

  If the pop-up window can 100% success, I think that the element of the catalogue shows 50% and tries to download files to vCenter/ESXi as an import job.  If the import job fails, then you need to investigate the newspapers of vCenter/ESXi side for more details.

• where can I get the vcloud Director OVF?

  For the life of me I can't find where to download the Director unit of vcloud OVF.  Can someone point me in the right direction?

  https://www.VMware.com/go/try-vCloud-Director

• Use OVF to install vmware vcloud Director.

  Use OVF to install vmware vcloud Director.
  What is the first user and password?
  

  Hello

  see the following link, must have what you need...

  http://www.yellow-bricks.com/2012/01/26/vCloud-Director-appliance-password/

  Thank you

• Unable to integrate with vCloud Director - data collection of computing resources is not

  Hello

  We are trying to integrate vCloud Director vCAC in vain.

  In short.

  vCD

  -VC organization - booking pool

  When you perform data collection in the calculation of the resources, it failed with the error.

  "Workflow"vCloudInventory"failed with the following exception: object reference not set to an instance of an object."

  Stack trace

  "at DynamicOps.VCloudModel.Interface.VCloudManagementServices.GetOrgVdcNetworks (String vdcId) at DynamicOps.VCloudModel.Activities.VCloudGetOrgVdcNetworks.Execute (CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute (ActivityInstance, executor, BookmarkManager bookmarkManager ActivityExecutor instance) to System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody (ActivityExecutor executor, BookmarkManager bookmarkManager, location resultLocation).

  Help, please.

  Thank you very much

  Your OrgVDC have a stray or not network?  There is a known issue that there must be at least a valid network on the OrgVDC you want to manage.  This could break the data collection for other organizations, so if there is a 'test' organization, it would be better to go to the resources page of calculation under the company administrator and delete all these management resources.

  This issue has been registered and should be fixed in the next version.

• vCloud connector 2.5 - copy the model of vSphere to vCloud Director fails

  Hi all

  I'm trying to make a copy of the model of the private Cloud for vSphere (e.g. my instance of vCenter lab) the vCloud Director private cloud (my instance vCD lab, which is deployed and registered with the same instance of vCenter mentioned above) with vCloud connector 2.5.

  I have deployed the server component of vCC, configured and deployed two nodes of vCC - a to connect to vCenter for private cloud config vSphere and another to connect to the vCloud Director org for the basic cloud vCD config private. Moreover, the vCloud Director is registered to the same instance of vCenter which is used for vSphere cloud.

  I then tried to open a copy of the model from the vSphere cloud node to the node of vCD. The task to export the OVF template will start, and the task of SCR plugin will also display the copy task. This vCD instance also model any TIME if you go to the properties of the VDC organization selected during the SCR copy Wizard.

  After about 18%, the percentage remains stuck there for a little bit before the 'Export OVF Template"task fails with"Operation timed out ". After that, the task indicated in the vCC plugin will fail also later with (OVF Export failed. Null message) and the import of VAPP model in vCD job will fail also - VAPP failure will take upward of space inside the affected storage however profile until I have manually remove the failing through vCD VAPP model object.

  Anyone else having this problem? I've seen this problem on both environments so far: vCenter 5.1 update 1 with vCD 5.1.2 and vCenter 5.5 with vCD 5.5. If the problem seems to be specific to the version of vSphere. The logs generated by server SCR bee all that useful for me to understand what went wrong did not.

  Thank you

  You can consult this KB, if you haven't done so yet:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2078110

  I hope this helps.

• Unable to see models with vCloud Director

  Hi all

  I use vCloud Director 1.5. and have created a few models in the vSphere.However when I try to import models of vSphere to vCloud, I am unable to view the created models. Please tell us what I could hurt.

  In addition, someone has user FAQ for vCloud director, if so, please let us know.

  Convert virtual computer models, then you should be able to view them to VCD using the vSphere import option.

• vCloud Director vCloud connector installation

  I try to get vCloud connector installed inside vCloud Director. I deployed a VCC vCC node and server in my network ExternalRouted and I am following http://pubs.vmware.com/hybridcloud/index.jsp to a T.
  Org network gives SCR Server 10.10.1.53 and VCC node 10.10.1.54
  Within the vShield edge apparatus I configure ports as such

  -Screen Shot 2012-02-23 to 2.20.09 PM.png

  -Screen Shot 2012-02-23 at 2.21.33 PM.png

  I can access my vCloud knot web server interfaces and fine, but when I try to register that a node with the server is just completely turns off. The VCC server can ping the SCR node with the NATed IP of 192.168.60.24.
  It is located on this screen and two tracks and leave real quick or he just completely dies. I tried to switch to the Public as well, but it's still doesn't work.

  -Screen Shot 2012-02-23 at 2.24.37 PM.png

  
  If I go to the server and I click the button on Client vSphere or cloud.vmware.com I see this error and that doesn't look good.

  -Screen Shot 2012-02-23 at 2.27.55 PM.png

  
  I have completely open ports in firewall for these two vApps and not *'s everywhere, and it always shows the same errors.

  I was able to complete the vCloud connector install with zero problems when I just did a normal vSphere OVF import save it on my server vCenter. This isn't a problem with the OVFs.

  Thanks for any help.

  I have not tried.  Of course in my setup, my NŒUD is vCloud with a NAT address and which works very well.  It is the SCR is the issue because it needs access to vCenter Server.  You can try to use an external live... or just move right in vCenter

• "Virtual Machine is a store of data not managed by vCloud Director."

  The deployment of new virtual machines in vCD 1.5 we see alerts the system on all the deployed virtual machines that say "Virtual Machine is a store of data not managed by vCloud Director.  Virtual machine has mounted the media or the drive to a store of data not managed by vCloud Director.  Ensure that the Virtual Machine has all the drives and the media mounted on a data store managed by vCloud Director".

  The virtual machines in the catalogue have been imported from vCenter and have a single drive and no media mounted.  Storage is the same that the new virtual machines are deployed.  Virtual machines of power on the good and seem to be ok, but they are all showing this alert system, with 3 catalog from different sources.

  Indeed, it is the question.

  I used SSD on the local disks for VM vswap. I have it configured on Cluster (cluster vswap policy for vSphere) and I got this error message.

  I configured the Cluster vswap strategy to use the same directory as the virtual machine, and I use the new "Host Cache" feature of ESXi5 to use my local SSD drives.

  Fixed it.

  To deliver you, just configure the policy of vswap cluster where you will store the vswap with virtual machine (on the same storage seen by vCD) or add storage nfs for the vCD and it will fix your problem.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

• VMware vCloud Director with the NSX Manager installation process.

  Hello world

  I recently planned to deploy VMware vCloud Director (so NSX Manager will be deployed, as part of the process) on an existing environment (existing virtual machines running, virtual switches,...).

  Customers use their virtual machines because they are in production.

  I was wondering if the deployment / installation of NSX Manager would cause no downtime or disturb the workflows running or even break the VM interconnections?

  Thanks in advance,

  Lawrence B.

  I looked at many tutorials, and indeed nothing should happen so that deploy a controller or something else. My concerns were about this "else", as the virtual switches and so on. I guess that the NSX will show existing resources such as the existing virtual switches (and so forth) already configured with vCenter?

  What vCloud Director does is interact with NSX via API.  Calls are exclusive to VXLAN (vdnscope-# resources in the API) and demand to deploy or update an edge.  vCD is not 'show' resources discovered by NSX.  You configure NSX and vCD makes an API call and said ' I want a Board connected to the port groups A and B "or"I want a new vWire of this VXLAN instance.

  Is there a document with the "best practices" for the deployment of vCD?

  Yes: VMware vCloud Architecture Toolkit: Cloud Computing reference Architecture | United States

  The meddle with existing resources, must have dedicated resources for the vCD vendor (aka the cluster in vCenter).  It is better to have that then using a pool of resources to a cluster where neighbour noisy problems can arise.  vCAT above might exceed a lot of that when you read it.

• Move the VM from: vCloud director to vCenter

  How to move a virtual machine from: vcloud director to the vcenter even integrated into vcloud Director?

  If VCD has no more need of this virtual machine, you can perform steps below.

  1 unregister the virtual of VC machine

  2 remove the machine virtual de VCD

  3. save the VM in VC

  SCR would be an additional tool that would be useful for moving loads of work, but a lot depends on number of cases of use of involved and of the virtual computer.

• autonomous VMRC console for vcloud Director

  Hello

  I use the stand-alone vmrc available in this link VMware vSphere 5: Private Cloud Computing, server and data center virtualization to open the console vsphere.

  Is it possible to use the vmrc to open vcloud Director console?

  Please help me.

  Thank you.

  Autonomous VMRC is not supported with vCloud Director.

  VMware Remote Console 7.0 Release Notes

  • VMRC does not support vCloud Director, vCloud Air and vRealize of automation of virtual machines.

  Therefore, you should use the console system provided in vCloud Director.