Unable to integrate with vCloud Director - data collection of computing resources is not

Similar Questions

• Unable to see models with vCloud Director

  Hi all

  I use vCloud Director 1.5. and have created a few models in the vSphere.However when I try to import models of vSphere to vCloud, I am unable to view the created models. Please tell us what I could hurt.

  In addition, someone has user FAQ for vCloud director, if so, please let us know.

  Convert virtual computer models, then you should be able to view them to VCD using the vSphere import option.

• What is the smallest model of VAPP available that can be used with vCloud Director?

  Hi all

  I was on the hunt to find the smallest operating system which can be used for demonstration purposes.

  I want to be able to quickly create vApps so a small footprint would be ideal.

  What guys do you use?

  I found this customization for operating system support invited into vCloud Director 5.5 (2058524) | VMware KB

  I always look for a 'micro' distribution that supports customization of comments.

  What is the smallest available?

• vCloud Director 1.5 device console connection is not displayed

  I have deployed vCloud Director 1.5 device in the private network. At is the configuration of the network. I ping the IP of the vCloud Director, I can access the console running on port 5480.

  https://192.168.2.38:5480 / It works.

  However, based on the rating guide, I guess to be able to do the initial Setup by access via:

  https://192.168.2.38/

  This connection cannot be configured. I have the connection to the device command line console, and run netstat - year, I don't see any process listening on port 443.

  Did I missed?

  It's strange, like the vCD device is virtually a plug-and-play operation.  Just deploy it and connect.  A couple of thoughts here...

  First, we focus on the IP addresses, you use when you configure the vCD device...  The deployment of the device, it will ask you for two IP addresses for the "network 1" and "network 2". "."  The lesser of these two IP addresses, this is what will be used for your HTTP and the higher numbered IP address will be for the Proxy of the Console.  Your right, however, it will specifically prompt you for one or the other.

  Second, if you use the device, you should not run the script configures.  The unit will take care of this for you.  Only, you would run the script configures if you were installing the binary real VCD.

  Finally, regarding your inability to you connect...  What it's like, you have the operational services.  You could also check this by using the chkconfig--list command.  From there, I try and divide the question to determine if it is a problem with connectivity, services that run on the device, or maybe even your browser.  To begin with, I would try using a different web browser than what you using your.  Normally, this should not be a problem, but it excludes the case where you have made any browser specific configurations that will be impossible to connect.  Since you know that the process of vCD are rising and running and you can access the host, then I would check to see if maybe that's a problem with just the SSL connectivity.  Once again, it would be strange if you were using the vCD device, but it's just another step to validate, right?  I know how make this the easiest would be to use openssl (which you can get for Windows or Linux).  I would just try a command like:

  #openssl s_client -connect vcd_ip:443

  and see if your able to establish an SSL connection with the cell of vCD.  Of course, you can always check the logs too.

  Hope some of these ideas help...

  Tom

• VCloud Director displays do not Vcenter data.

  Hi guys,.

  I installed VCD 5.5, vsheild Manager and vcenter on a single ESXi 5.5 . I am facing problems with VCloud Director.Although I have attached the Vcenter Sucessfully in VCD, vcenter data not poping upward into Vcd. So the list of hosts is empty. No resouce pool are coming in Vcd.

  Here are my questions coming in my mind... I think I might get hurt

  1 then I installed VCD 5.5, vsheild Manager and vcenter on a single ESXi 5.5 host?

  2. is it a problem with the license... Although all of them are allowed until 2015. ?

  3. do I need to manually install the agent Vcd on ESXi... Although I think that this should be done automatically? If yes how to do this.

  Please tell me where I can be wrong.

  I have attached snapshots of Vcenter and VCD. Please review those and help out me

  All responses will be appreciated.

  Thank you

  Tarun Gupta

  You must create a provider vDC for nothing appear.  This requires some DRS to be on (if you don't have it already done) and requires usually two hosts in a cluster.  This is because you need to spend in maintenance mode to install the agent correctly and can vmotion powerd on the VMS of a host while the other prepares.  It's all part of the installation and Administrator's guide.

• autonomous VMRC console for vcloud Director

  Hello

  I use the stand-alone vmrc available in this link VMware vSphere 5: Private Cloud Computing, server and data center virtualization to open the console vsphere.

  Is it possible to use the vmrc to open vcloud Director console?

  Please help me.

  Thank you.

  Autonomous VMRC is not supported with vCloud Director.

  VMware Remote Console 7.0 Release Notes

  • VMRC does not support vCloud Director, vCloud Air and vRealize of automation of virtual machines.

  Therefore, you should use the console system provided in vCloud Director.

• Storage vMotion in vCloud Director

  Hello

  It is already possible to have a vm to a data store to another without interruption in service (storage vmotion ) with vCloud Director. If this isn't yet - it is planned to apply this? This isn't a feature for the Org Admin, but for the vCloud Admin, especially when - storage systems go to replace. And don't tell me to use a storage-virtualization product. Even those who should be replaced one day ;-)

  That would be average cource, Org-Admin would see several data stores during the migration the vapps. One thing to consider is of course how manage fast-provioned vm. Consolidation is no real option, since the virtual machine must be turned off (unless the gui). And of course, it's a unique solution...

  Thank you

  You should be able to use Storage vMotion directly * BUT * there * traps * you need to be aware of:

  (1) you * need * of storage vMotion virtual machine from this data store in your PvDC

  (2) If you use Fast provisioning (Linked Clones) the Storage vMotion, no he will not keep the format of the source, and * WILL * consolidate the virtual machine.

  If you want to keep the disc format, use the vCloud API and the * move * call the API (it will take care of everything you need to keep it as a linked clone).

  Note: I speak on 1.5.x, as you have profile storage & DTS 5.1, you can manage differently with DTS Maintenance mode >

  Hope this helps,

• Can't no hierarchy of vCloud Director

  Hi all

  I have configure vCenter Chargeback 1.6 (1.6.0.0 - 351155) and vCloud Director 1.01 (1.0.1 - 356485), two of them are the last version that I downloaded from the vmware Web site.

  I installed vCloud Director Collector but Chargeback cannot load the vCloud Director organization hierarchies.

  Is there anyone, who successfully of Chargeback configuration with vCloud Director?

  I have attached the log file of vCloud datacollector.

  Thank you

  Can you try a connection in the chargeback database or database vCloud by using a client?

  The log shows, connect to the oracle database is not set because of the limited number of connections.

  Might help, check out this link--> http://forums.oracle.com/forums/thread.jspa?threadID=898395.

  In short:

  Select * from v$ session;
  ALTER SYSTEM SET PROCESSES = 500 SCOPE IS SPFILE;.
  ALTER SYSTEM SET SESSIONS IS 500 SCOPE = SPFILE;.

  This should be, but to be able to connect as sysdba or system, you must restart the listener, only if you are not able to connect.

  Make sure you are able to connect to a database using sqlplus or sqldeveloper clients, and then restart the data collector.

  -Kitenge

• vRealize device Orchestrator 6.0.3 and vCenter 5.5 5.6 U3/vCloud Director

  Hello world

  I have a few questions on the compatibility between vRO 6.0.3 and vCenter vCloud Director 5.6 and 5.5:

  In vCenter Orchestrator 5.5.2 I plugin to connect the vCO to vCenter (version 5.5.2.1875635):

  

  1. in new vRO 6.0.3 for configuration I can not find this plugin, but when I checked the news of plug-ins I found a plugin vCenter (version vCenter Server 6.0.2.2995112). But how can I connect vRO 6.0.3 vCenter 5.5 (only by the workflow?).

  

  2. a supplementary door on vSphere Web Client integration with vRO. To do this properly first of all I must use SSO authentication mode? It won't work with LDAP authentication?

  3. anyone know if vRO works closely with vCloud Director 5.6? I found 5.5.1.2 plugin, but using this plugin, I can not connect to vCD (in vCO 5.5.2 I have no problem).

  
  

  
  

  
  

  Hello

  (1) Yes, plugin configuration is workflow (this is the approach recommended new plug-ins; the old configuration of Web UI is deprecated and will be removed at some point).

  (2) only the SSO mode is supported; LDAP won't work. Note that the UNIQUE authentication token is acquired in the name of the user logged in vSphere client to Web, so you must make sure that this user has enough permissions to connect to vRO.

  (3) it should be newer versions of this plugin, and compatibility matrix showing which plugin version is compatible with given the vCD. Don't know where it is, however.

• vCloud Director for 5.6.3 - level storage disk virtual machine profiles service provider

  Hello

  A new feature has been ad with vCloud Director for provider 5.6.3

  Profiles of storage disk virtual machine level:

  Unlock loads such as databases and e-mail servers that require different levels of a single VM disks to balance the cost of storage with performance.

  Can someone show me how I can do?  When I try to add a second disk to a virtual machine I can not change the storage for that specific disc profile!

  Thank you

  It is a unique feature of the API.

  I think that this should be the right section of the API schema: http://pubs.vmware.com/vcd-56/topic/com.vmware.vcloud.api.reference.doc_56/doc/types/DiskType.html

• vCloud Director or vRealize Automation?

  Hello

  I was hoping I could get some advice regarding the choice between vCloud Director and vRealize Automation. We have set up a test environment for vCloud Director however read some articles, it seems that it is a product that reaches the end of life for businesses, but not for service providers.

  So my question is a service provider should us be implementation vCloud Director or vRealize Automation? We do not want to be in a position to migrate off vCloud in a year.

  Any advice would be appreciated.

  Thank you

  Chris

  I can't make any kind of recommendation between the two, because I don't know what you want to do with the products.

  Addressing the availability of the product and the support of it:

  vCloud Director just won't be available to independently purchase and withdrew the license of the Suite from 6.x.  You must purchase the license 5.x to get it (assuming that it is available)... This aspect, if not suite your needs right now until mid-2017 (when vCloud will end support for users of the company).  From 2017, you have to make a decision as to what will replace vCloud or continue to use vCloud Director, even if we will not offer support for it.

  VRealize Automation will meet your needs?  I do not know without knowing your use case and requirements... that is for discussion of a VMware sales representative.

  Apart from all this: VSPP is the VMware service provider program.  A version of vCloud Director will exist for them, but it is precisely for them (members of the VSPP program).  Unless you work for a member of the VSPP program, the statements above concerning vCloud Director are what you think.

  If you are Member VSPP, vCloud Director for the providers of services (5.6.x) is available as the direct vcloud Director 5.5.x successor.  Then by all means we will continue to support these versions, and it can be used to manage resources like a Cloud provider.

  I had a number of people say they are service providers, which is very beautiful.  Be a VSPP means being in a specific program of VMware, which gives access to certain things (which AFAIK is vCloud for Service providers).

  I'm not trying to be harsh or terse here, but I want to just make sure we do differentiation key on what is available to whom and how.

• vCloud Director 5.5 does not show all comments properties define in EGGS

  Hi all

  I work with a partner who is having a problem after the upgrade to 5.5 VCD

  Problem: vCloud Director 5.5 does not show all comments properties define in the OVA. Same EGGS has worked with vCloud Director 5.1

  Comment: When you create a new TIME by using the model from EGGS, all properties are displayed.

  But even if all of the properties have been shown at the time of the creation, that some have been observed when MISTLETOE was used to view existing comments properties

  Any thoughts?

  Thank you

  Florence

  This is a bug in VCD 5.5.0 and 5.5.1. It will be fixed in 5.5.2. If you can't wait for the fix so there is a /hotpatch. If you file a support request then GSS can give you the /hotpatch

• Cannot create a subscription to notifications vCloud Director (Server.setCustomProperty routine-cursor)

  Hello

  I'm having a problem when you use the workflow of subscription vCloud Director notification.

  When you try to add an AMQP broker using the workflow ' To create a subscription for notifications vCloud Director ' I get the error messages: "Value can not be supported by the custom property".

  The broker and the recipient are created.

  After doing some research, I see that the error occurs at the end of the workflow to the 'Set prop' custom task scriptable during the procurement of:

  If (routingKeyAtt! = null) Server.setCustomProperty (subscription, "routingKey", routingKeyAtt);

  No idea why I can't set this specific CustomProperty?

  no idea who to work around this problem?

  Thank you!

  All - I've updated the package of Notifications for 5.1 file found here: vCloud Director 5.1/5.5 blocking tasks and notification using AMQP package -please try this version, it should now allow the subscription as well as adding custom properties successfully create.

  UPDATED March 11, 2014: update to "Create a vCloud Director notifications subscription" workflow for working with vCloud Director 5.5. The change IS backward compatible with vCloud Director 5.1.

• Where can I find the package libXdmcp vCloud Director 5.1 RPM installation?

  Hi all

  I have installed my first vCloud Director and am not a Linux
  Guy at all. In any case my RedHat 6 operating system does not include the RPM libXdmcp
  package. I downloaded and installed several RPM packages on the web,
  but none of them does not seem to fix the problem. vCloud Director always told me
  the package is not installed. I think that am downloading and incorrect installation
  RPM. Can someone please point me to a URL where I can download the right file?
  I went to many Web pages with hundreds of links to libXdmcp
  downloads, but I don't know which one to choose from. Also if you can tell me the
  good way to install this would be great!

  Thank you in advance for your help!

  He should be the one below, it's him I used all my environments and is the one in the post to blog as well.

  
  

  libXdmcp - 1.1.1 - 3.el6.x86_64.rpm

• VApp on vcloud Director console

  Hello

  I have a little problem with vcloud Director.

  When I access the console of vapp, a window will appear, but it is completely black...

  I tried to access the machine with the vsphere client and it works... but I want to access my computer via the web console.

  You have an idea?

  Thank you

  It means something between the IP address of the client/Psoxy, pr cell/ESX is blocked, there is a bad road, or you have a load balancer to do SSL unloading on certificates of proxy requiring passthrough.  nfortuately one of the eanc thos create the connection problem.  You must ensure that all the pieces are in place one by one.  You may need to test each connection separately.  There is further discussion on this topic as well.