import problem between the ApplicationController and ViewController project

Similar Questions

• Persistence, shared between the EJB and WAR projects

  Hello
  
  I created an Enterprise Application in netbeans which an EJB project and archive web. This can be expanded further at a later date by the presence of a client application as well. I'm still pretty new to this so you don't have to forgive me if it is a simple problem. I have a persistence unit (persistence.xml) that I need to share between the two WAR and EJB, but so far, does not feel very lucky. I have read the various responses and they say I should have the EAR that is constructed in the following way:
  
  Project.ear
  =======
  META-INF/MANIFEST. MF
  lib/Persistence.jar
  -> META-INF
  -> META-INF/persistence.xml
  project - ejb.jar
  project - war.war
  
  When I try to compile, if I get the following messages among two EE modules:
  
  Note: The XML persistence [META-INF/persistence.xml] has not been found. NO GENERATION will occur! Please ensure that a persistence XML is available either from the directory CLASS_OUTPUT [META-INF/persistence.xml] or by using the eclipselink.persistencexml property to specify its location.
  
  I tried to copy the persistence.xml in the META-INF directory in the EAR file and defining the eclipselink.persistencexml=META-INF/persistence.xml, but it still shows the same thing. Is this a classpath problem or is something else wrong?
  
  Thank you very much

  The EAR is a good idea, but you put the META-INF/persistence.xml in your ejb module. The EJB is where you do all your (managed container) transactional stuff, so do call in your EJB since the WAR instead of trying to share a persistence between modules unit.

• How you can know if you want to compare materials is the problem between the processor and the memory when you have black screen!

  Hello

  If you have a black screen which can be if the processor is dead or memory is dead how you know if you do not reserve memory, the problem is the processor or memory?

  I tried this on my computer, I put on the CPU and I got black screen, I put in memory and I got black screen.

  Thank you

  Johan

  Thank you

  so in this case, how you can know if it is the processor or memory is the problem.

  you have to always have book of memory by you to resolve these issues (to make sure if the memory is problem) what memory or processor its work not at all.

  or it is too nested ways!

  Johan

  From what you described, it is possible that the processor, the RAM and the motherboard are all damaged. Or also the cold of power supply the problem (which could be checked for appropriate using a voltmeter). If you do not reply the existing motherboard then without spare parts (RAM, processor and motherboard) to use in tests, there is nothing more you can do with it to test these components.

• Alignment problem between the line and fill of forms

  Anyone had the same problems with the last update. I noticed that my forms of filling line up to the width of the outer border instead of the median line. I checked the pixel grid was off and the scale of the alignment is set to Center.

  see if the "use Preview limits" is on in preferences

• Communication problem between the listener and OEM

  Hi all
  I got my OEM running and communicates with the database without any problem until I had a problem with the other guests and to kill some OEM process and listener, now it does not communicate with the listener.
  
  I rebooted my PC and tried to leave in the hope that it worked as it had been, but the result is on the contrary. Somehow, the communication is corrupt. Currently, I can start the OEM help

  emtcl start dbconsole

  but when I try to start the listener from the browser of Net Services Administration: connection to the host, it keeps from without success.
  
  What follows is the trace file of the Manager, who got warnings and errors that I don't understand

  emagent.trc:
  
  SQL = "                                                                   OCISessionGet"...
  LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=firefly.snowdrop.com)(PORT=1521))(CONNECT_DATA=(SID=inara)))
  2011-06-14 17:22:42,398 Thread-421710160 ERROR vpxoci: ORA-12541: TNS:no listener
  2011-06-14 17:22:42,398 Thread-421710160 WARN  vpxoci: Login 0x68d100 failed, error=ORA-12541: TNS:no listener
  2011-06-14 17:22:42,398 Thread-421710160 WARN  TargetManager: Exception in computing dynamic properties of {inara.snowdrop.com, oracle_database },GetDbBlockSize::ORA-12541: TNS:no listener
  2011-06-14 17:22:42,400 Thread-424859984 ERROR TargetManager: nmeetm.c : Target inara.snowdrop.com has a failed critical dynamic property
  2011-06-14 17:22:42,403 Thread-424859984 WARN  upload: Upload manager has no Failure script: disabled
  2011-06-14 17:22:42,403 Thread-424859984 WARN  upload: Amount of upload data will be recalculated due to reload.enabling collections and regenerating metadata.
  2011-06-14 17:22:42,403 Thread-424859984 WARN  TargetManager: Regenerating all Metadata
  2011-06-14 17:22:42,470 Thread-424859984 WARN  upload: Truncating value of "SHORT_NAME" from "Average Synchronous Single-Block Read Latency (ms)" to "Average Synchronous Single-Block Read La"
  2011-06-14 17:22:42,471 Thread-424859984 WARN  upload: Truncating value of "SHORT_NAME" from "Average Synchronous Single-Block Read Latency (ms)" to "Average Synchronous Single-Block Read La"
  2011-06-14 17:22:42,568 Thread-424859984 WARN  upload: Truncating value of "COLUMN_LABEL" from "Total messages processed per queue per subscriber per minute in the last interval" to "Total messages processed per queue per subscriber per minute in "
  2011-06-14 17:22:42,568 Thread-424859984 WARN  upload: Truncating value of "COLUMN_LABEL" from "Total messages received per queue per subscriber per minute in the last interval" to "Total messages received per queue per subscriber per minute in t"
  2011-06-14 17:22:42,568 Thread-424859984 WARN  upload: Truncating value of "COLUMN_LABEL" from "Messages processed per queue (%) per subscriber per minute in the last interval" to "Messages processed per queue (%) per subscriber per minute in th"
  2011-06-14 17:22:42,568 Thread-424859984 WARN  upload: Truncating value of "COLUMN_LABEL" from "Age of the first message in persistent queue per subscriber (seconds)" to "Age of the first message in persistent queue per subscriber (sec"
  2011-06-14 17:22:42,568 Thread-424859984 WARN  upload: Truncating value of "COLUMN_LABEL" from "Age of the first message in the buffered queue per queue (seconds)" to "Age of the first message in the buffered queue per queue (second"
  2011-06-14 17:22:42,584 Thread-424859984 WARN  collector: enable collector
  2011-06-14 17:22:42,588 Thread-424859984 WARN  collector: Regenerating all DefaultColls
  2011-06-14 17:22:43,715 Thread-421710160 ERROR upload: Exceeded max. amount of upload data: 212 files, 200.680481 MB Data. 88.62% of disk used. Disabling collections.
  2011-06-14 17:22:43,715 Thread-421710160 WARN  collector: Disable collector
  2011-06-14 17:22:46,814 Thread-421710160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
  2011-06-14 17:22:46,929 Thread-421710160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
  2011-06-14 17:23:16,099 Thread-435099984 ERROR command: nmejcn: received no status header from repository at https://firefly.snowdrop.com:5500/em/upload/
  2011-06-14 17:23:17,071 Thread-415410512 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
  2011-06-14 17:23:17,201 Thread-415410512 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
  2011-06-14 17:24:17,230 Thread-424859984 WARN  ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag
  2011-06-14 17:24:17,230 Thread-424859984 WARN  ssl.io: fd=14: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1
  2011-06-14 17:24:17,230 Thread-424859984 WARN  http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out
  2011-06-14 17:24:17,230 Thread-424859984 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text = 
  2011-06-14 17:24:47,355 Thread-424859984 WARN  ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag
  2011-06-14 17:24:47,355 Thread-424859984 WARN  ssl.io: fd=7: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1
  2011-06-14 17:24:47,355 Thread-424859984 WARN  http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out
  2011-06-14 17:24:47,355 Thread-424859984 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text = 
  2011-06-14 17:25:47,446 Thread-315353424 WARN  ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag
  2011-06-14 17:25:47,446 Thread-315353424 WARN  ssl.io: fd=7: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1
  2011-06-14 17:25:47,446 Thread-315353424 WARN  http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out
  2011-06-14 17:25:47,446 Thread-315353424 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text = 

  and here is the content of the file log listener

  14-JUN-2011 17:28:39 * <unknown connect data> * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=54171)) * establish * <unknown sid> * 12525
  TNS-12525: TNS:listener has not received client's request in time allowed
   TNS-12535: TNS:operation timed out
    TNS-12606: TNS: Application timeout occurred
  14-JUN-2011 17:28:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=54168)) * establish * inara.snowdrop.com * 0
  14-JUN-2011 17:28:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=54166)) * establish * inara.snowdrop.com * 0
  14-JUN-2011 17:28:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=54165)) * establish * inara.snowdrop.com * 0
  14-JUN-2011 17:28:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=54158)) * establish * inara.snowdrop.com * 0
  Tue Jun 14 17:28:59 2011
  14-JUN-2011 17:28:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=54161)) * establish * inara.snowdrop.com * 0
  14-JUN-2011 17:28:59 * service_update * inara * 0
  14-JUN-2011 17:28:59 * service_update * inara * 0

  Could someone give me a pointer on how to solve this?
  
  Kind regards
  Val

  Hi Valerie,

  ... not easy to distance :-(

  The tnsping should work - I have known nothing that this command was suspended. I've never known such problems in GC...

  "But perhaps article ID ' unable to connect to the database: connection failure may be due to a slow network, or the presence of an intermediate firewall" setting up data in the grid control [1074643.1 ID] "MOS might be useful.

• Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

  My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

  How to restore the space of line between the subject and the message body?

  Hello

  1. How is like print preview?
  2. don't you make changes to the footer settings?

  Method 1.
  If that doesn't help you can not save the file wmp.dll
  a. log on as an administrator.
  b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
  c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

  Method 2.
  If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Routing problem between the VPN Client and the router's Ethernet device

  Hello

  I have a Cisco 1721 in a test environment.

  A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).

  The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.

  The configuration was inspired form the sample Configuration

  "Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"

  and the output of the ConfigMaker configuration.

  Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem

  side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).

  Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive

  (customer has a correct route and return ICMP packets to the router).

  The question now is:

  How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?

  conf of the router is attached - hope that's not too...

  Thanks & cordially

  Thomas Schmidt

  -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.

  !

  version 12.2

  horodateurs service debug uptime

  Log service timestamps uptime

  encryption password service

  !

  !

  host name * moderator edit *.

  !

  enable secret 5 * moderator edit *.

  !

  !

  AAA new-model

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  ! only for the test...

  !

  username cisco password 0 * moderator edit *.

  !

  IP subnet zero

  !

  audit of IP notify Journal

  Max-events of po verification IP 100

  !

  crypto ISAKMP policy 3

  3des encryption

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  pool ippool

  !

  ! We do not want to divide the tunnel

  ! ACL 108

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  interface Ethernet0

  no downtime

  Description connected to VPN

  IP 192.168.1.1 255.255.255.0

  full-duplex

  IP access-group 101 in

  IP access-group 101 out

  KeepAlive 10

  No cdp enable

  !

  interface Ethernet1

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  IP access-group 101 in

  IP access-group 101 out

  full-duplex

  KeepAlive 10

  No cdp enable

  !

  interface FastEthernet0

  no downtime

  Description connected to the Internet

  IP 172.16.12.20 255.255.224.0

  automatic speed

  KeepAlive 10

  No cdp enable

  !

  ! This access group is also only for test cases!

  !

  no access list 101

  access list 101 ip allow a whole

  !

  local pool IP 192.168.10.1 ippool 192.168.10.10

  IP classless

  IP route 0.0.0.0 0.0.0.0 172.16.12.20

  enable IP pim Bennett

  !

  Line con 0

  exec-timeout 0 0

  password 7 * edit from moderator *.

  line to 0

  line vty 0 4

  !

  end

  ^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-

  Thomas,

  Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.

  Kurtis Durrett

• Strange problem casting between the DATE and time STAMP

  Hello world
  
  I'm faced with a problem of strange casting between the DATE and time STAMP. Strange, because this happens in SQL-Developer and the Testdatabase, but not when called from inside SQL-Plus, even if all Session settings are set to the top completely equal.
  
  I work on the Oracle 11 g Enterprise Edition Release 11.2.0.1.0 Windows database and run the following script, taken from SQL-Developer script output:
  
  < pre >
  create table ts_test)
  time/date stamp,
  stamp_copy timestamp)
  table TS_TEST standing.
  
  create or replace view vw_test as
  Select cast (date stamp) buffer,
  Cast (stamp_copy as date) stamp_copy
  of ts_test
  view VW_TEST standing.
  
  insert into ts_test
  Select systimestamp, the double null
  1 eingefugt Zeilen.
  
  Commit
  festgeschrieben.
  
  create or replace trigger trg_ts_test_iu
  instead of update on vw_test
  Start
  Update ts_test
  Set stamp_copy =: new.stamp_copy;
  end;
  RELAXATION trg_ts_test_iu kompiliert
  
  Update vw_test
  Set stamp_copy = stamp
  1 Zeilen written on.
  
  Select the stamp, stamp_copy, dump (stamp_copy)
  of ts_test
  STAMP STAMP_COPY DUMP (STAMP_COPY)
  -----------------------------------------------------------------------------------------------------------------
  30.05.2012 19:08:49, 218000000 30.05.3192 20:09:50, 000000000 Typ = 180 Len = 7: 131,192,5,30,21,10,51
  
  Select *.
  of nls_session_parameters
  VALUE OF THE PARAMETER
  ----------------------------------------------------------------------
  NLS_LANGUAGE GERMAN
  NLS_TERRITORY GERMANY
  NLS_CURRENCY €
  NLS_ISO_CURRENCY GERMANY
  NLS_NUMERIC_CHARACTERS.
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT exact hh24:mi:ss
  NLS_DATE_LANGUAGE GERMAN
  NLS_SORT GERMAN
  NLS_TIME_FORMAT HH24:MI:SSXFF
  NLS_TIMESTAMP_FORMAT JJ. MM YYYY HH24:MI:SSXFF
  NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
  NLS_TIMESTAMP_TZ_FORMAT JJ. MM YYYY HH24:MI:SSXFF TZR
  NLS_DUAL_CURRENCY €
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  
  17 Zeilen offiziell
  
  Rollback
  Rollback abgeschlossen.
  < / pre >
  
  Look at the strange data that stamp_copy was after the update.
  
  When run from SQL over, everything is fine. But when I run this code in our application, the same phenomenon occurs. I've even seen a data dating back to the year 11907 (!), giving an exception by selecting from the table.
  
  Someone at - it an idea on how to work around this bug?
  
  Best regards
  
  Jürgen

  Did you check metalink for bugs?

  There are a few listed in this blog, that may be useful for you.

  http://hoopercharles.WordPress.com/2011/02/17/strange-timestamp-behavior/

• What are the relationships between the logging and IKM?

  What is the best method to use in the following scenario:
  I have about 20 tables with the large amount of data sources.
  I need to create interfaces that join the source tables in target tables.
  The tables are inserted every few seconds with about hundreds of thousands lines.
  There may be a gap of a few seconds between the insertion of different tables that could be attached.
  The source and target tables are on the same Oracle instance and schema.
  I want to understand the role of: 'Logging CDC' and "IKM - incremental" and
  How can I use it in my script?
  In general, what are the relationships between "Logging" and 'IKM '?
  Use both? Or maybe it's better deelte and insert the target tables?
  
  I want to understand what is the role of "Logging CDC"?
  Can 'IKM - incremental' work without "logging"?
  Must 'Logging' have PK on the tables?
  What should I do if I can't say PK (there may be several identical lines)?
  
  Yael thanks in advance

  user604062 wrote:
  Hello
  Thanks for your quick response!

  No probs - its still fresh in memory I did a major project on this topic last year (400 tables, millions of lines per day (inserts, updates, deletes), sup-5 minute latency). The problem is it isn't that well written on the web, that you have read the blog of the example I linked to in my first answer? See also here: http://odiexperts.com/changed-data-capture-cdc/

  Always on logging:
  My source table is inserted all the time.
  The interface to join the source table in the target table.

  In ODI, the correct term would be your source table "fits" in the table target, unless you mean literally that want to join the the source with the taget table table? My question if you want to do with the result of the join?

  What exactly the "journaling" CDC updates?
  It updates the model of ODI? interfaces? The source of data in the model of ODI? The target table?

  Logging CDC configures and deploys the data capture mechanism (Triggers or log based capture, IE Logminer/streams/Goldengate) - it is not updated the model as such, she pointed out the metadata of the model of ODI repositoty as a CDC data store, allowing you, the developer say ODI to use log data if you wish (reported in the interface) There is no change in the target table, you get an indicator of metadata (IND_UPD) against a line during the integration (in C$ and I have tables$) that tells you if its insertion (I) and update (U) or deletion (D). It had ' lines allow you to synchronize the deletions, but yoy say its inserts only then you probably used use this option. "
  So the only changes are the source table to your interface, another diary data (if you use logging) or the table of the actual source (if not using the logging).

  This is the main thing that I don't understand!

  I hope I made a little clearer.

  Try the following as a quick test:

  Reverse a source table an engineer and the target (at least) table.
  Import the update incremental LKM and IKM.
  Import of the JKM you want to use.

  Create an interface between the source and the target without any deployed JKM.
  Configure the options of JKM on the model, the "Start log" to start the process of capture - this is quite a complex stage and a lot of things to understand what is happening in the source database, better to check code ODI sends to the database and to review the documentation of Oracle database for a description of what his weight (instantiate Tables (, sets of creating change, creation of subscribers etc. establishment of newspaper groups, creating views Journalising etc.) -you will need to consult your Source DBA database initially as ODI wants to make many changes to the source DB (in mode Archivelog process max, parallelism, size, Java etc.)

  Now, edit your interface and mark the table source for use "Journalized data bank.
  Restart your interface
  Compare the difference in the generated code in the journal of the operator, see the differences of the operator.

  >

  Thank you, Yael

• What is the difference between the ADF and ADF Essentials?

  What is the difference between the ADF and ADF Essentials?

  and how to ensure that the essentials of the ADF is enough for the project rather then ADF.

  Thanks in advance.

  Hello

  The main problem is, you are not allowed to deploy critical applications of the ADF in the clustered environment.

  Kuba

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Qosmio G50 - 10I - no synchronization on TV between the picture and sound

  My problem is that there is no synchronization between the picture and sound (+ the sound is thin about 5 seconds +)
  When I watch TV on Windows Media Center on the Qosmio G50 - 10I

  I tried to change the settings in Windows Media Center, but some will escape.

  How to connect this TV to the G50?
  You use the HDMI cable that provides audio and video signal together at the same time or you connect the TV with two different cables (for audio & video signal)?

  Also check the settings in Realtek HD audio Manager located in the control panel. Here, you can change some sound effects for different outputs (digital speakers, HDMI) audio

  PS: Last but not least install codecs. I recommend a package called K-Lite Mega codec package

• Difference between the G20 and G25 models

  Hi people!

  I searched your laptop and I was amazed by the Qosmio.
  When I was going to order it, I noticed that there are many models of the G20 with different specifications. Also, I found G25 on internet research and found no difference between the G25 and G20 except receiver TV G25 is NTSC and G20 was released on March and G25 was in June. Instead, they have the same specifications for the hard drive.

  I live in the Portugal and the model Qosmio I can find that this is the G20-118. I was looking for the model that has 2 x 100 GB SATA HD, but cannot not thought about it.

  Internet research I found Qosmio G20-111 which has 2 x 100 GB SATA HD, but on the web page mentioned that it was a Pentium III processor (ridiculous, isn't?). I was looking for more reliable information.

  Already searched for toshiba pages and found no specifications for all models I found 490LS on the research on the web as the G20 - 102, 105, 106, 108, 109, 111, 118, 123,...

  Can someone help me with this? Are there any reliable web page where I can see the differences between the models? is there a .pdf or anyone who can please give me some advice?

  Money is not a problem at this time to acquire the laptop, I'm looking for only the laptop performance more!

  Best regards
  João Pereira

  Hello

  It of very difficult to say what camera is best, because there are many models with different parts.
  However, I found page with description of the G20 and G25.
  Take a look at this link.

  http://www.releasereview.com/Toshiba-Qosmio-G20-105-108-114.aspx?d=0101000580926052005

  Good bye

• cRIO-9074 ethercat with a switch/hub between the cRIO and slaves

  Hi, I have a cRIO9074 I'll use 7 JVL EtherCat Mac800 motor control.  Engines are fairly spaced, so I use a switch of CU2005 EtherCat Beckhoff 5 ports between the readers and the cRIO with 2 motors in series on three legs and a motor on a port by itself.  My problem is that labview will not find all engines unless one of the ports on the switch motor is plugged, or a line of engine is connected directly to the port ethercat cRIO.  He has no problem see two engines on the same line, it just will not see one of them if more than one line of motor is connected to the switch ethercat.

  Thus, HALP!

  
  

• I want to assign the function 'delete' key between the CTRL and ALT keys to the right of the space bar.

  I have a new Toshiba laptop and would like to change a function key.  I thought I remembered reading that this can be done.  Is this possible or am I just hallucinating about that possibility?  I want to change the allocation between the ALT and right CTRL keys right key of the space bar.  Help me, please!

  Hi Marion O.Lawrence,.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  There are some third party programs to rebuild the key, you must use your favorite search engine and the search for the program.