Import the features of Oracle ADF BC with Jdeveloper 11.1.1.2

Similar Questions

• The Repository Maven Oracle ADF 12.2.1 update

  Hello

  will there be an update of the Repository Maven Oracle with ADF 12.2.1 libraries?

  If yes - that someone can say when it will be available.

  Well, there is no need to open multiple threads on the same topic, just to bump existing thread.

  Anyway, only Oracle employees may have this information so your best chance is to create the Service Request(if you have support account).

  But don't expect much, Oracle policy is to withhold the release date for their products.

  Dario

• Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

  Hello

  I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

  It ended to give details below.

  Citing O 11.2 patch .0.1.1

  OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

  **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

  Setup Oracle interim Patch version 11.2.0.1.1

  Copyright (c) 2009, Oracle Corporation.  All rights reserved.

  OPatch could open the log file, the recording is not possible

  Home Oracle: *.

  Inventory Center: C:\Program Files\Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.1.1

  YES version: 11.2.0.2.0

  YES location: * ORACLE_HOME * \oui

  Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

  History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

  09_16-27 - 49 PM .txt

  OPatch failed with error code = 73

  Can someone please help me solve this problem?

  Do I need to install the last opatch utility?

  Hello

  This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

  09_16-27 - 49 PM .txt "

  indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

  Check the owner of this file system.

  Kind regards

• What am I I did wrong, imported the video is not in line with the audio.

  Hi I have imported video on a digital camera Fujifilm, A850 and that you want to change in the first Elements 7, but the sound is not in line with the Visual.

  I tried reading upwards and by changing the control, but so far without success.

  What should I do?

  Help, please.

  Your camera produces AVI with MJPEG codec. And your problem is quite common that Premiere Elements may have problems with MJPEG files. Generally re - install a MJPEG codec will solve the problem. You can try it free:
  http://www.free-codecs.com/Motion_JPEG_Codec_download.htm

  Otherwise, you can open the file in Windows Movie Maker and export it as a DV - AVI wil be compatible with PE7.
  http://www.adobeforums.com/webx/.3bc247e2

• Give advice about uninstalling the database Client Oracle under Windows with multiple Oracle homes

  Hi all.

  Probably a Client of Oracle database uninstall will arrive in a Windows box, where there are several houses of Oracle:

  (1) the Oracle Database 11 g Client is.

  (2) the House of Oracle Oracle database server.

  (3) oracle 6i Oracle Home.

  I have these concerns:

  (1) do I stop Oracle Services NOT related to the Oracle Home being deleted? I guess that's not necessary, but it is recommended?

  (2) the YES program to run must be or is better to use the YES program located at removed Oracle (Oracle Client to Database 11 g in this situation)?

  "(3) I see there are additional post - installation according to section 5.3 steps"manually remove the Oracle database Client components remaining' the Oracle Client Installation Guide for Windows.

  Could someone provide the additional steps or recommendations?

  Sorry but I do not trust the windows plataform much!

  Thanks in advance!

  Best regards, Luis!

  Hello myluism,

  You can use the oracle supplied binary dinstall to uninstall oracle binaries that you can download from this url of Oracle Database 11 g Release 2 for Microsoft Windows (x 64) that looks good in your context.

  In addition, you can also uninstall the binary files by running the dinstall respecitive houses Oracle located in the path: ORACLE_HOME\dinstall.

  Please go through the url: https://docs.oracle.com/cd/E11882_01/install.112/e47959/deinstall.htm#NTCLI1326

  I hope this helps.

  Thank you and best regards.

• Is it possible to customize the appearance of the feature DataSynch (oracle.ateam.sample.mobile.datasynch) added automatically by the generation of AMPA UI tool?

  Hello team

  We have generated a few pages using AMPA of MAF User Interface generator. These pages contain a link to the DataSynch function to display the current synchronization Actions.

  It's the back button on this the DataSynch feature page does not have something, but when we checked the source code of this page it contains the command link actionlistner assigned property BACKS to "#{GoToPreviousFeature} '.

  So, is there no work around for this, or we should create another new page similar to it.

  Thank you

  Diprish

  Diprish,

  The back button should work fine if you call the function of data synchronization by using the GoToFeature bean. This bean then knows the previous function to return.

  In any case, the reusable datasynch feature is just a sample as to how you can make visible pending synchronization actions.

  In real applications of MAF that we build with AMPA, we always create our own functionality to synchronize data with the look and feel of the application we are building.

  You can build the functionality from scratch by looking at the source code of GitHub, or you can simply copy the project DataSynch have the workspace of GitHub and add it to your own application and modify it as you wish.

  If you do this, make sure that you change the function ID in order to avoid any conflict of ID function.

  Steven Davelaar,

  Oracle Mobile A-team.

• Import the schema in oracle 10G

  I had imported schema oracle 10g to oracle 7 s. but I found that all the tables are imported.
  When I looked in the log file, I found the message below.
  ->
  IMP-00003: ORACLE error 1659
  ORA-01659: impossible to allocate MINEXTENTS beyond 10 in the CCD_DATA tablespace
  IMP-00017: statement failed with error ORACLE 1917:
  < -.
  
  Could someone help me in this issue.
  
  Thanks in advance.
  Vijay

  ORA-01659: impossible to allocate MINEXTENTS beyond 10 in the CCD_DATA tablespace

  Increase storage space (resizing existing datafile) or add the data file to CCD_DATA

• How to refresh the iterator of 'detail' ADF liaison with up-to-date data?

  JPA EJB - ADF Databindings JDEV 12.1.3 Application

  I ve a (one to many) (many-to-one)- relationship

  A CGrupo contains a list of UsuarioGrupo

  

  A UsuarioGrupo contains CGrupo

  

  I created a page with ADF databindings as follows:

  Note that there is a Master table - table in detail

  

  And the parameters of the iterator of detail (usuarioGrupoListIterator)

  CacheResults: false

  Refresh: always

  

  Then I run the project and the only recording is displayed correctly

  

  But if I delete the folder

  

  and then I re run the iterator, but there are no changes in the page

  
  

  

  
  

  Is there a solution for this problem?

  Thank you for your attention and help.
  

  Ok. If the data is modified by another application you will need to rerun the query on the master (and children collection of refreshment) database (assuming you have JPA caching enabled by default). There are number of ways to make your main EJB Session to use to query the objects method (for example, the query with @QueryHint (name = QueryHints.REFRESH, value = HintValues.TRUE); and FETCH JOINED on children). Then, children are automatically updated in the data control.

• Update the issue in Oracle ADF in JDeveloper

  Hi all

  My ADF application is to have around 350 forms. Application size is 700 MB. I am facing a problem of refreshment in this application. whenever I'm changing all requests in the view of the objects or research it is not reflecting immediately. Say: I changed a single query. Then I deployed the application means the application takes the old query. to take the modified query, I rebuilt the view object. Whenever I am faced with this same problem. A few times in 2-3 deployments it is modified by itself (without the refurbishment) and work very well. Some time after 10 times as he takes the old query only. Whenever I have rebuilt in order to solve this problem. Please help me solve this problem. I use oralce 11g.

  Try to invoke any operation of cleaning before you deploy the application.

  In the main Menu-> build--> pure all

• Oracle ADF: Problem with display with component LOV selectManyChoice/CheckBox values

  Hi all

  I use Oracle JDeveloper 11.1.1.7. I want to use the selectManyChoice component in my requirement. When you use the same thing, I have observed that selectMany components as a component of selectManyChoice/selectManyCheckBox are not filling LOV VO values in drop-down list. Instead it displays the value VO destination attribute values.

  For example,.

  I have EmpVO and DeptVO. Now, I want to join LOV "DepartmentId" attribute of EmpVO using DeptVO as sourceVO. After this operation, if I drag and attribute DepartmentId of Drop EmpVO as consisting of selectOneChoice , when running, we will be able to see DepartmentName from drop down list I chose DepartmentName as attribute and departmentId as ListAttribute in LOV.

  To create the SelectManyChoice link, if I drag and drop the EmpVO instance to the page, we can find SelectManyChoice option under the "Multiple Sélection" option. As soon as the SelectManyChoice option, we will be able to see the window of EditListingBinding as shown below where we are asked to map baseAttr and displayattribute for this component. This means that he has not considered LOV which we show you. To view Department name in the drop-down list, we can select departmentVO instance 'Source database', while in the Base and display attribute we can map the DepartmentId and departmentName. By doing this, we can achieve my schenario for display in the menu dropdown. The problem is that this element of will will bind with DepartmentVOIterator and no matter what I select component selectMany, I take and wherever I need to set the value on the target attribute programmatically.

  

  Is there a declarative way to display the selectMany component that uses LOV as a source in the view of value in drop-down list? Please suggest.

  Thanks in advance.

  Praveen.

  Hi William,.

  Thank you for your response. one who shared is related to the display of values such as MultiSelect component. But my requirement is to have combination of InputText and SelectManyChoice so that the user will have two entry key in place. So whenever we enter the code value in InputText, the corresponding value in the SelectManyChoice box should be checked [some]. This combination both annd InputText SelectManyChoice I need to create a component.

  I created the component as described below.

  I created DeclarativeComponent which is having an InputText and component SelectManyChoice. Component of SelectManyChoice I'm filling ViewObject value programmatically. On the selection of any value in the drop-down list SelectManyChoice value changeListener I get selected value and conversion Stringg and affecting InputText to show the selected value. Also in reverse ie. case, whenever I enter the correct value in the InputText, valueChangeEvent, I am taking and convert these values to the list and setting the value property of SelectManyChoice in order to make the selection.

  And to make this component as a single component, I used contentStyle = ' width: 0px "to hide the box InputText of SelectManyChoice as shown below.

  

  Thank you, regards,

  Praveen.

• The EOM to Oracle 11g works with clients of 9i

  If I install OEM 11 g on a Windows Server, I download emca data to a database in Oracle 9i on a SUN Server?

  Take a look at the Certification Oracle Enterprise Manager Grid Control auditor [ID 412431.1] on My Oracle Support.
  Here you will find all the combinations that have been certified (11, 10.2) WHO works with as agent, database, etc.

  Eric

• Import the Table of previews of content with sidecar?

  Is this possible?

  Thank you

  Tim

  Bob law. You do not specify the toc.png files in the sidecar.xml file. If you add in the section files, they are automatically used. Example:

  00_cover_h.indd

  00_cover_v.indd

  toc_cover.PNG

  01_ahab_h.indd

  01_ahab_v.indd

  toc_ahab.PNG

• [JDev12.1.2, ADF, GlassFish 4] A few questions on the tutorial of Shay "Deploy Oracle ADF Essentials Applications to Glassfish"

  Hallo (Shay),

  I want to deploy my application Web ADF to GlassFish that is installed on a different server from the development computer.

  The application interacts with a MS SQL Server database.

  I have some doubts/questions on the tutorial of Shay https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to

  So far in the development phase, I deployed the application only to the JDeveloper-itegrated WebLogic Server on the development computer.

  Creating a connection pool

  • I could successfully creates a pool of connections only by copying the sqljdbc4.jar library in the C:\glassfish4\glassfish\libdirectory. Is this OK or should the library remain in C:\glassfish4\glassfish\domains\domain1\lib?
  • Is there a way to hide the password in the additional properties?
  • Is there any setting for the property should do (especially for MS SQL Server)? For example, somewhere I read that the isolation of transactions should be set to read uncommitted... but I did not understand why.
  • What is the difference between types java.sql.DataSource resources and java.sql.XADataSource?

  In JDeveloper application configuration
  

  • Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) set to java: comp/env/jdbc/MyDatabase_DB_SQLServerDS. If I change this field value to jdbc / < name_of_jdbc_resource_created_in_GlassFish >, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What's wrong?
  • JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?

  Taking care of the libraries used by the application

  • In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files I put in C:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?

  Other questions

  • What is the difference between putting a library in the lib of GlassFish folder and put it in the folder lib of Domain1?
  • Deployment procedure used by Shay in his tutorial might also be used to deploy the application on a remote production server?
  • Is there a way to manually delploy an application, for example by copying manually under GlassFish project folder?
  • My final goal is as follows. I have a clean Setup that allows me (1) to continue to run the application in JDeveloper on its built-in WLS, (2) to test the application to the GlassFish that I have installed on the computer development and (3) delploy the application on the remote production server. Could help me do that?

  These are a lot of questions.

  I thank in advance all the users who want to respond and I hope that the answers to these questions will help also others.

  Ciao,.

  Federico

  Federico - most of your questions is generic Glassfish questions that do not specifically have anything to do with ADF - I recommend that you post on the forum of Glassfish. (Or read the Glassfish documentation for things like the difference between directories and deployment/admin console).

  >>

  • Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) parameter tojava:comp / env/jdbc/MyDatabase_DB_SQLServerDS. If I change the value of this field of jdbc /, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What is the problem?

  This is because JDeveloper uses an integrated WebLogic when you run and therefor cannot use the data source of Glassfish.

  I suggest that make you this change only when you go to deploy on Glassfish.

  >>

  • JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?

  We don't know, as the matrix of certification for the ADF will show that we have not tested/certified this combination.

  Oracle JDeveloper and ADF 12 c (12.1.3) supported systems

  >>

  • In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files that I put inC:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?

  Use the properties of project-> libraries and class path to add the jar or create a library and add it to your project.

  Make sure that this library is deployed by default.

  >>

  • Deployment procedure used by Shay in his tutorial can also be used to deploy the application on a remote production server

  Yes

  > Is there any property setting should do (especially for MS SQL Server)?

  Oracle ADF business with several databases components

• Maven error: could not solve addiction com.oracle.adf:junit:jar: [12.1.3,12.1.4)

  Hello everyone.

  Using Jdeveloper 12.1.3 with extensions "Integration of JUnit BC4J" and "Integration of JUnit.

  I created a maven project using JUnit to create unit tests. This is dependency added to my pom.xml file in JDeveloper after configuration created the first unit test:

  <dependency>
       <groupId>com.oracle.adf.library</groupId>
       <artifactId>JUnit-4-Runtime</artifactId>
       <version>12.1.3-0-0</version>
       <type>pom</type>
       <scope>test</scope>
  </dependency>
  
  

  If I compile and run my tests from JDeveloper whatever it works but once I order my source code and build the project Hudson (Continuous Integration server), it fails. The error shown in the console of Hudson's (CommonCode is the name of the project I'm building):

  [ERROR] Cannot run the goal on the CommonCode project: could not resolve the project com.company.project.common:CommonCode:jar:1.0 - SNAPSHOT dependencies: could not collect the dependencies to com.oracle.adf.library:JUnit - 4 - Runtime:pom:12.1.3 - 0-0-> com.oracle.adf:junit:jar: [12.1.3,12.1.4): no version available for com.oracle.adf:junit:jar: [12.1.3,12.1.4) in this range-> [help 1]]]

  I have already installed the plugin maven-oracle-sync and completing my private repository (Artifactory) as described in this document. However, when I browse my private repository I can't find the artifact com.oracle.adf:junit:jar: [12.1.3,12.1.4) and I guess that's why my build has failed.]

  Why JDeveloper add a dependency that is not included when the maven-oracle-sync plugin is pushed on the maven repository?

  I forgot to mention that, when you use the following dependency for JUnit instead of one provided by Jdeveloper, the project compiles in my continuous integration server:

  <dependency>
       <groupId>junit</groupId>
       <artifactId>junit</artifactId>
       <version>4.11</version>
       <scope>test</scope>
       <type>jar</type>
  </dependency>
  
  

  Clues about why Jdeveloper adds a dependency that cannot be met by the maven-oracle-sync plugin?

  Thank you.

  Alexis

  Hello

  Please check below blog.

  https://blogs.Oracle.com/Groundside/entry/maven_and_adfbc_unit_tests

  A question which has developed recently turned around to configure your Maven POM in 12.1.3, such that you can run the JUnit Tests ADF BC successfully interactively in the IDE and headless via Maven perhaps in your work of Hudson.  Out of the box, the default value that you will end up with POM will be missing two vital pieces of information and need a little extra configuration.

  Once you have created some unit tests JDeveloper will have added dependencies for JUnit extensions JDeveloper JUnit, something like this:

  com Oracle.ADF.Library

  JUnit-4-LIFE

  12.1.3 - 0-0

  POM

  test

  com Oracle.ADF.Library

  JUnit-Runtime

  12.1.3 - 0-0

  POM

  test

  Thank you

  Amey

• I have a question about the functionality of Oracle Identity Manager...?

  Hi friends
  I have a question about the features of Oracle Identity Manager.
  Here's my question:
  Self-management is possible network passwords (reset / unlock) with Oracle Identity Manager 9.1.0.2
  
  Very grateful.

  What Kevin suggested this means that you are managing accounts and their password by IOM. If your condition is the same then follow:

  Re: error during password reset using the self-service portal