Import video camera via sd card

Similar Questions

• How to import videos from my SD card?

  Original title: import

  How to import videos from my SD card?

  Hello

  1. What is the brand and model of the computer?
  2. your computer has any reader build-in card?

  You should have in the generation of drive or external card reader to read the contents of the SD card. You can also use the device, which uses this SD card, to import the contents of SD card.

  See the bottom of the article for more information on the SD card.
  Memory and storage
  http://Windows.Microsoft.com/en-us/Windows7/memory-and-storage

• I cannot import video from an SD card in movie maker

  I get an error message that says: I need to codec - is it possible that this is done automatically whenever I want to import video from my camera, my SD card or my pictures folder?

  No, it is not automatic and it is possible that the
  video is not compatible with Movie Maker.

  What is the video format (extension)?

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

• Problems with importing video camera mini dv JVC

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  ==========================================
  Maybe the following will help:

  Windows Vista-
  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  A problem of import
  files in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Vista-
  Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems
  Windows Vista-
  Importing files into Windows Movie
  Manufacturer: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• First 11 stops when importing video camera DV

  I upgraded the operating system Windows 10 and now, importing the video from the camera stops the program and go out automatically.

  Instead, I can open and work on projects of creation 11 old.

  Director allowed me to import video from the camera, but it was not compatible with the first 11.

  After disinstalling and re - install the first 11-64 bit, now the video from the developer is accepted, but still the camera import is not possible.

  What else could I try?

  Thank you

  If you want to edit in Premiere Elements, I would recommend capture with DV Win, no MovieMaker. MovieMaker grabs his video to a different file format.

  Since your operating system was originally Windows 7, try the pilot inherited from Windows 7 fix:

  The problems of Firewire (IEEE 1394) in Windows 10, Windows 7, Windows 8 and 8.1 - David Knarr

• Import videos: camera roll videos vs app

  Hello. I just discovered that it is possible to import videos into the film or the video app. I wonder if one of these methods is better than the other? The only advantage of the app videos until now, I've noticed, is that it shows some details about the video (for example, the size, the resolution).

  If you want to watch movies or videos, that app videos would be better in my opinion, because things can get jumbled in the film.

• Can I play FDR-x1000v video camera via iOS PlayMemories app?

  I can read them on my wrist LiveView remote, but don't see a way to read a file from camera in the application.

  Maybe I'm missing something basic.

  Any tips?

  I found this buried under settings > camera settings > see in Images from the camera

  It might be more obvious is the playback mode was a selectable mode on the screen of the live image.

  In addition, it would be very useful to hear the sound without having to download the file on the device.

  Thank you

• What is the best way to transfer HD video camera content SonyHD of PE?

  I'm a bit confused... is possible to import video files via the USB connection on my camcorder Sony HDR - CX100 HD in PE9 direct?   I installed the Sony transfer software called PMB and PE9 launch now... a conflict between programs?    Maybe I do not even need the Sony software and need to uninstall?  (Of course should try first... in hindsight).   I remember that I couldn't manage the content Sony HD in PE4, but now I've upgraded to PE9 - then maybe I can use the files directly?    I'm sure someone must have written a thread on the subject of how to get HD in PE9, and need a pre-conversioin, etc. of course would appreciate a pointer to this discussion if it already exists.

  Thanks in advance!

  David

  Bill is right. Except for two things:

  (1) you can capture any digital video tape - which includes miniDV and HDV. But, as Bill says, your camcorder is neither.

  (2) I recommend that to get the video from your camcorder, connect your camcorder to your computer and use Premiere Elements' Get Media / Flip, AVCHD or a camcorder to open the importing video, a tool to transfer video from your camcorder to your computer.

  And don't forget to make sure your Premiere Elements project is set up to work with the format of your video or you will have all kinds of problems later!

  Take a look at my 8-part basic training tutorials series free to the support site of first Elements Muvipix.com for more information.

  http://forums.Adobe.com/thread/537685?TSTART=0

• Import of video camera not supported

  I have a SONY DCR-TR700 dial 8 camcorder that is not listed, supported by the FCPX. Is there a work around that would make it possible to import videos on this camera of seals in a hard drive?

  To connect to the Mac via the cable firewire then use QuickTime X to capture.

  Al

• Import the camera directly into Lightroom via USB

  I looked around this forum but could not find an answer to what I thought was a simple question.

  Using the Mavericks 10.9.5 and Lightroom 5.6

  I am trying to improve my workflow.

  I currently take two steps to get my photos in Lightroom:

  
  

  1. connect the camera via USB for Mac and Nikon Transfer allows you to import photos from my camera in a default folder on my Mac, I also put it to remove photos from my camera once completed.

  2. open Lightroom and import photos to the catalog, including moving them to the desired specific final destination folder.

  I know I could use a card reader but don't want to go down that road because it's a pain out the mem card and its replacement.

  Is it possible to reduce this to a single step using Lightroom.

  I tried implementing of Image Capture on my Mac to make Lightroom automatically open when a camera is connected, but the option is grayed out, which seems strange.

  If I have lightroom open, and then select the camera as source only get the option copy files not move them to a folder of destination of the machine photo so can't erase the memory of the device.

  I can't be the only person who wants to do this someone has a solution.

  After playing around a bit I have answered my own question.

  I discovered that Nikon Transfer has an option to automatically open another application, so affecting that Lightroom, I realized what I wanted.

• When I put my memory card in from my video camera that nothing happens, how do my videos now that I don't have my camera, and the Tower not responded to my card?

  I don't have my video camera but I don't have my card memery with video always on it, when I put in my tower where the memory card reader is nothing happens I have no I have idiots on what to do, but the light on the Tower beside the drive when I put the card in what the hell happened?

  Hello
  See if the card has memory of a lock switch on the side it... just turn off the lock.
  I hope this helps!

• How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card?

  How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card? (I am running windows xp professional).

  PS - I'm a senior and not warned, any computer do pls 'non technical' answers as possible.

  Thanks in advance for the answers to my question!

  Hello Fred!

  • First create a new folder by right click on an open space on your desktop
  • hover the mouse over the new, & click on new folder
  • right-click on the new folder and choose Rename
  • write your selected folder name
    
  1. Connect your data cable USB & POWER to the camera or insert the memory card
  2. Open the files and Select the files you want to save
  3. Select files butten now the mouse left click and move the mouse over the files
  4. then right click on the selected files and click copy
  5. go to the folder you named and open
  6. right-click and select Paste & that's it!

  I hope this works!
  Do not hesitate to ask, I don't mind!

• How to burn videos from my sd card on my digital camera or a cd dvd disc

  How can I burn a video from my sd card from my digital camera for each CD or DVD

  What is the video file format (extension)?

  First... copy the video to a folder on your hard drive. Could be your Video file
  or could be a new folder on your desktop.

  You want to burn a data CD / DVD data only for the purpose of archiving (backup)?

  Or... you want to burn a video CD / DVD video... who will play in a DVD player?

• Windows import video repeatedly stops after a few seconds when you use DV cam to convert and import analog videos

  With the help of a Canon Elura 40 mini DV camera to import my old Video 8 tapes to the .avi format. I followed the instructions from http://windows.microsoft.com/en-US/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera . However, when I click Start import import will work only for a few seconds and then stops. If I keep restarting after that it stops every time (5 to 10 times), I finally get a message under the controls of cam DV that says "commands does not. Then it will keep the import without problem. I discovered this solution accidentally, but not knowing when it will eventually continue to record does get the departure point. If I import directly using a digital camera 8 this is not the case, but the Video 8 does not play well on the Digital 8.

  Thank you.

  Hello

  Method 1: You can follow the steps described in the article below that addresses this question

  Error message when you try to import video clips from a device on a Windows Vista-based computer: "the import device is not responding.

  http://support.Microsoft.com/kb/922977
  

  Method 2: you can follow the steps mentioned in the link below

  
  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

• However, questions to import videos from digital camera to Windows Vista can import images

  Original title: I can't import videos from my digital camera to my computer (Windows Vista), but it will import the photos.

  is there a download I can use to make the computer to import the videos?

  Hi MartCow45,

  1. what program do you use?

  2. what exactly happens when try to import videos?

  3. do you receive error messages or error codes?

  4. what type of files you are trying to import?

  You can visit the following links and check if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.