Import videos: camera roll videos vs app

Similar Questions

• Windows import video repeatedly stops after a few seconds when you use DV cam to convert and import analog videos

  With the help of a Canon Elura 40 mini DV camera to import my old Video 8 tapes to the .avi format. I followed the instructions from http://windows.microsoft.com/en-US/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera . However, when I click Start import import will work only for a few seconds and then stops. If I keep restarting after that it stops every time (5 to 10 times), I finally get a message under the controls of cam DV that says "commands does not. Then it will keep the import without problem. I discovered this solution accidentally, but not knowing when it will eventually continue to record does get the departure point. If I import directly using a digital camera 8 this is not the case, but the Video 8 does not play well on the Digital 8.

  Thank you.

  Hello

  Method 1: You can follow the steps described in the article below that addresses this question

  Error message when you try to import video clips from a device on a Windows Vista-based computer: "the import device is not responding.

  http://support.Microsoft.com/kb/922977
  

  Method 2: you can follow the steps mentioned in the link below

  
  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

• However, questions to import videos from digital camera to Windows Vista can import images

  Original title: I can't import videos from my digital camera to my computer (Windows Vista), but it will import the photos.

  is there a download I can use to make the computer to import the videos?

  Hi MartCow45,

  1. what program do you use?

  2. what exactly happens when try to import videos?

  3. do you receive error messages or error codes?

  4. what type of files you are trying to import?

  You can visit the following links and check if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with importing video camera mini dv JVC

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  ==========================================
  Maybe the following will help:

  Windows Vista-
  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  A problem of import
  files in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Vista-
  Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems
  Windows Vista-
  Importing files into Windows Movie
  Manufacturer: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• First 11 stops when importing video camera DV

  I upgraded the operating system Windows 10 and now, importing the video from the camera stops the program and go out automatically.

  Instead, I can open and work on projects of creation 11 old.

  Director allowed me to import video from the camera, but it was not compatible with the first 11.

  After disinstalling and re - install the first 11-64 bit, now the video from the developer is accepted, but still the camera import is not possible.

  What else could I try?

  Thank you

  If you want to edit in Premiere Elements, I would recommend capture with DV Win, no MovieMaker. MovieMaker grabs his video to a different file format.

  Since your operating system was originally Windows 7, try the pilot inherited from Windows 7 fix:

  The problems of Firewire (IEEE 1394) in Windows 10, Windows 7, Windows 8 and 8.1 - David Knarr

• Cannot import video from Sony handycam HD. start the button market orders / stop playback of the camera but no pictures or sound appear on the Editor screen.

  I can't import video from Sony Handycam HD 1080. Start button on the editor controls playback of the camera, but no image appears on the screen of the editor. Thnx

  andypfaris

  What version of Premiere Elements you are using and on what computer operating system is running?

  You doing DV or HDV firewire capture of data in a Capture of the first Hare elements window? What is your

  What is your predefined project?

  Is it a "it worked before but not now" show or "it never worked before"?

  Thank you.

  RTA

• How to import video from a DVD movie maker window... Who was burned from a video camera

  How to import video from a DVD movie maker window

  Hello J Choi,

  1. What is the operating system installed on your computer?

  2. what version of Movie maker are you using?

  I suggest that you copy the video from the CD on the hard drive of the computer and then import it to create DVDs. Browse the CD and locate the video, copy it to your disk (computer) hard, and then try to import.

  You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions

  I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions?

  danobtwo wrote:

  See the video, I hear the audio until it is imported.  any suggestions?

  Do you mean during the import process?

  There is no FCP X parameter to change the way THAT DV is imported.

  I used to hear the audio import with Sony cameras but Canon may be a different story.

  If the imported files are OK, then it can be a thing of Protocol firewire Canon.

  Al

• HP pavilion 23-q012 all-in-one: can not import video from the camcorder to a lask of firewall do imput port

  I can't import video camcorder do a lask of the firewall port imput. Reserched replacement cable IEEE 1394 with a USB one and found it won't work for video. I tried a dvc 100, but the video editing progrm isn't pinnicle. How can I load the video into the computer, or can I charge my current camera videos? He uses the digital band map memeory for photos only.

  You kind of mutilated the terms, but if the camcorder needs a firewire IEEE 1394, your PC cable card cannot accommodate a.  There may be some devices that claim to USB conversions, but normally, they will not work with a camcorder.  It seems that another PC is going to be necessary or another camera.

• Error: The video device is currently in use... trying to import video

  original title: importing video

  I'm trying to import video from my camcorder. I did this several times in the past with no problems. Now, I get the following message: the video device is currently in use. Close any other program that is using the device and try again.

  I don't have any other programs open. I went to the Device Manager; Imaging devices; and my camcorder is listed and it says that the device is functioning properly. I tried to "import from digital video camera" using Windows Movie Maker and I still get the same message. I tried to disconnect the 1394 cable and turn on/off several times my camera. I still get the same message. I've never had this problem before. I have Windows Vista Home Premium.

  I had the same problem since I started recording on 10 July
  I have DELL Studio 64-bit pc
  Sony DCR TRV350 so I use I394 cable 4 pin-to-6-pin firewire
  While your DVR camera is connected to the PC via firewire, search Windows Update and install the patches to recommend.
  If you have Windows encode uninstall it
  reset
  It worked for me
  It may be useful
  I checked with sony for help. They could not help, but it gave me a clue
  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C111893

• Importing video in Vista using the Panasonic PV-DV910 camcorder

  I'm trying to import video from my camcorder in Vista using Windows Movie Maker and it gives me an error saying: "import video could not find a compatible digital camera...". "My camcorder is on, on the way to VCR, connected with a Firewire 800 ExpressCArd adapter. My computer sees the Firewire. I went through all the troubleshooting. I searched many Web sites. Some recommend a registry cleaning, I don't want to do another source. Can someone help me? Thank you!

  Hello Mtkamom,

  Thanks for posting on the Community Forums of Microsoft Vista.

  You can follow the steps below and check if your camcorder is detected by the computer.

  1. click on start
  2. in the start search box type "devmgmt.msc" then press the Enter key.
  3. in the Device Manager, check if you are able to see the "IEEE 1394 Bus host controller" and that it works correctly.

  If this is the case, you can try a different cable or on another computer to make sure that the camcorder and the cables are good?

  If this does not work you can pull out the card, remove the card Firewire Device Manager or uninstall it and put it in and reinstall. You can also try to temporarily disable any security software installed on the computer and try to check if your computer detects the camcorder.

  Also, you can try to contact Panasonic to see if they have any updates on this issue or a new software to install on the computer.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I import videos miniDV?

  Need serious HELP!

  My old camera was stolen and have a bunch of miniDV to my daughter, I want to download on computer and my friend has a samsung miniDV camorder but I can find a program that will allow me to download his camera can anyone help me find a free software to make a project of time? email me at * address email is removed from the privacy * if you can help! It so important that I will be flooding the NET with the application help everywhere!

  The following links may be worth a visit:

  Windows Vista - import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Windows Vista - video live Import from a DV camera
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-live-video-from-a-DV-camera

  Windows Vista - Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  If the AutoPlay screen does not appear... What follows
  Articles may help:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• I cannot import video from an SD card in movie maker

  I get an error message that says: I need to codec - is it possible that this is done automatically whenever I want to import video from my camera, my SD card or my pictures folder?

  No, it is not automatic and it is possible that the
  video is not compatible with Movie Maker.

  What is the video format (extension)?

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

• How do I pull-up "Import video" when it did not come with autorun in Windows when I use firewire to hang my DV camcorder?

  I am trying to download the video from my DV camcorder with a Firewire connection, recognizes that the computer is connected with appropriate drivers.  However, when I plug the FireWire and power on the camcorder and set it to VCR to camcorder to play the tape, Autoplay on computer does not at all giving me the option to "import video"?  I know that Autoplay works on the computer I can import pictures from my digital camera to the computer with no problems.  I want to know how I can import video on my computer in a file so it can then be uploaded to YouTube or engraved on a DVD, etc...?  I would appreciate help that you can offer.  Also, is there a way to open the "Import vidéo" function under Windows with Autoplay?

  Thanks in advance!

  If your wanting to put this on youtube, import with windows live movie maker or Gallery also, photo

  They have functions to post videos on youtube.

  Otherwise do a right click on the drive, in that it is and select open or copy and then paste it in a new folder.

• Import videos at a faster speed?

  Can video be imported to Windows Vista at a pace faster than the speed of reading 'normal '?  I use a JVC DV camera and cable IEEE 1394.  My interest is to get the video from my camcorder DV on my PC faster.   Any help is appreciated!

  Hi lonnie boyd,.

  1. are you trying to transfer video from the camera or trying to play?

  No option is available to change the normal video transfer speed in Windows Vista.

  You can check the following links for more information:

  Import video from a videotape

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video from a live DV camera

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-live-video-from-a-DV-camera

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.