Imported while first without the sound? Strange update or fault?

Similar Questions

• Error with the sound when updating for Window Vista Home SP2.

  After the update to vista home SP1 SP2, the sound does not work.
  tried to uninstall and install the drivers. No use.
  Here IE 9, but it does not work on SP1.
  Help PLZ.

  has obtained the answeer, you must uninstall the audio driver with your manufacturing and restart your comp. and then download IDT High Definition Audio CODEC Driver 6.10.6087.0.

  restart your computer.

  And wooggeee, it works perfectly...

  Thanks Thahaseena M.

  Presilia Trivedi

• Videos playing only with the sound after update 49.0.2

  After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/

  It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false

  This may not take effect until the next time that you exit Firefox and start it again.

  One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• cannot import photos iphone since the ios 10 update

  Hello

  I use Photoshop elements 14 updated until today, but since I have this week updated my iPhone to iOS 10 organizing elements 6 does not recognize not my iPhone as a camera to import photos since.

  I'm working on a Windows 10.

  Can you please tell me how to fix this?

  It does not matter if I have my phone is open or closed, you never know.

  I hope to get a solution soon, because I need some pictures of my phone...

  Cordially, Anne

  Hi Anne,.

  Please visit the link and see if help:difficulty iTunes on Windows 10 has not detected / recognizing iPhone, here's how. Redmond Pie

  Thank you
  Bell

• To convert my Keynote slideshow (09) .mov, I always end up with double blades on slides with sound, a sound and one without the sound. Why? How should I do?

  When trying to convert a Keynote slide show (09) in format .mov, I end up with double blades on slides that have sound. What makes the total video almost twice as long as I wish. How do the conversion with only sound slides appearing and eliminating silent rehearsals?

  You will need to confirm which version of Mac OS, and Keynote, you use as your profile shows very old software that is obsolete and is no longer supported. I assume his keynote address version 4 If you are using Mac G5.

  IV never heard of Keynote, do what you describe in any version, so we need the details of how you have the presentation put in place. If you post a sample file that illustrates this problem on Dropbox I review on my old power Mac.

• Red video and no sound at the end of the clip 3 hours when they are imported into first

  Hi all

  I currently have a problem with first Pro CC when a clip of 3 hours that I recorded (720 p/24 fps) using XSplit loses video and audio in the last 10 minutes when they are imported into first. The rest of the video is perfectly fine, but this section of it does not correctly (it goes forever, one minute or more per image) and will not export the missing without audio recall bias, and the video (export fails at the end). The clip is a created and coded by XSplit MP4 file and is able to normally play outside Premiere.When overview in the first, reading only shows a screen completely red. There is no effects applied to the element, or any change to the it.

  I tried to clear my cache preview and import the clip into a new project with exactly the same results in the same place in the clip.

  Thanks for any help!

  Hi, IPA,.

  You have a video file that has a variable rate, which does not work with Premiere Pro. You can transcode the file, and then it should work OK. Many people use the brake hand or similar.

  Thank you
  Kevin

• I use windows xp. Was informed that I could no longer use switdhed to Google Chrome and Internet Explorer. Today I received the notice of updates Activevex. Is it safe?

  First of all, I am not very computer saavy, so have patience. My antivirus, Eset, posed by the original note that my server could not support such what and sent in an update which I do not.   I use xp, without the need to update at this time.  Recently, I was informed that Internet Explorer was no longer an option and I switched to Google Chrome 3 weeks ago...  No problem until this morning, it was recommended that I support Active vex.  A lot of floating security around warnings.  What is c? Safe?

  That looks more like a sort of malware. I have 150 machines under XP with IE and have no problem at all.
  Take a look at this site for some information and instructions.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

  PS I know exactly how long dogs can take as I have 3 myself! Laughing out loud!

• Stop the sound of back/forward

  I was wondering if there is any way to stop the rewind and advance fast sound you hear when you move the back or front chronological marker along your videos. Or is there a better way to quickly navigate through videos? I know that his happens because music, I added its annoying me...

  

  Céline

  Thanks for the reply. Just as I suspected.

  14 elements of first (the most recent version and just came out) has undergone changes in its mounting Panel. Especially ones involving audio tracks.

  Please refer to point 2 at the top of my blog first elements 14 First Look details ATR first troubleshooting items: first items 14 First Look details

  If you have the first 13 items, you do not have the muting of the audio track to which you were referred. In the first elements 13/13.1, these icons to the left of the track name are for display only - style for videos, 4 display styles to select from and for audio 2 display styles to choose one (with as wave and no waveform). But nothing of what I just wrote will influence your elements first 13 base want to silence the audio when you scroll the contents of the timeline.

  A possibility to explore

  1 video 1 video track with audio related on the Audio 1 track. And you want to scroll the timeline without the sound.

  2. open the Audio Mixer (mixer Audio/Menu Tools table) and put a check mark next to the button Mute for 1 Audio track. Resize the Audio Mixer Panel, it is out of your way, but you always silent access to the box.

  3. put the box of Mute, when you do not want sound. Remove the check mark for mute when you do not want sound.

  

  I'll think about it even more.

  RTA

• Why are the videos muted - with the sound bar to the max and my prefs system with the sound upward?

  I click on a link to a YouTube video, and plays video without the sound. I have check the sound bar and he is not silent. I put the sound to the maximum, still no sound. I check my system preferences and the sound is in place.

  Hey lejohnson,

  It seems that you have already tried a lot of things. Have you looked at the article what to do if Firefox will play all of the sounds? There is useful information there and links to a few other articles that may help.

• No sound after the first Pro 6.0.3 update

  I lost the sound on my .mts files after the upgrade of the first Pro 6.0.3. I tried to disable the program and reactivated it again and now I have the whole HD tempates return still no sound. Any ideas? (I am a creative Member cloud if it makes a difference)

  Kind regards

  Kristian

  Hello

  It is on the new imported. I have 64-bit Windows 8.

  Earlier, I did a complete reinstall of Premiere Pro and started from scratch and now it works again.

  Kind regards

  Kristian

• What happened to the sound in xp after a windows update

  so I'm not the only one with this problem. about two or three weeks, I woke up one day and grew up my computer after hibernation, and he was asked to restart my windows xp system to complete an update of windows. After that I did, my sound disappeared completely. the volume has disappeared from the bar of tasks and in the Panel of control under sounds and audio devices, it says no audio device, but the audio device is there and the driver is as well. I did some tests to try to understand why he did this. first of all, I uninstalled the audio card in the Device Manager and reinstalled realtek. When I did, a lot of drivers began to appear that I've never seen before who were related to windows and they had yellow! "s next to them. After trying several versions realtek sound drivers for my card, I decided to load my fedora linux OS to see if it was a bad sound card, but the material works very well under linux. I went back to xp and used a program called SiSoftware Sandra and let it scan my system. in the results, I was getting errors with DirectX and DirectSound, but I could not understand what it meant. I also used the DirectX dignostic tool which also gave an error when testing the sound with it. so I am almost sure, this problem was caused by something that microsoft made in one of their latest updates for windows xp. That's the only explanation logical I can come up with because it is not a hardware problem and drivers are not the problem either. My question is how can this be brought to the attention of microsoft in order to examine the question and to fix. Oh and I forgot to mention that I tried to reinstall DirectX as well, but still no luck. I guess that I'll stick to fedora until microsoft solves this problem.

  OK, I wanted to just update this thread with my last State on my problem. I tried everything that I could think of to try and fix my sound. I used a lot of different antivirus programs to see if I could find an infection as the cause. while I found some infections, they do not seem that cause problems. as a last resort, I backed up all my data and programs on an external hard drive and did a complete reformat and install windows xp. While the sound does not work at first, install the right driver for my sound card did the trick after the new installation of xp. so I didn't really want to resort to do a full reformat because of how long it would take, but he turns out to be the only solution to my problem. now, I just spend a good all by restoring all my data and programs, but, overall, it is useful to have her back. What a strange question however. I can't say I ran across that one before and I am not sure what caused it, but I think that it is a corruption in DirectX that I couldn't fix. Well, you live and you learn. so if anyone has a similar question to mine, you may need to do the same thing, I did to solve the problem and make a complete reformat and install. don't forget to backup your data if you do not want to lose well

• How do I would return a video that has the sound without completely removing the sound?

  Ive tried to do this in movie maker, but it takes away the sound, and I don't want that. Help?

  The video clip is perhaps not fully compatible with
  Movie Maker... it may be worth trying to convert it to
  format .wmv before import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• AE CC14 creates a composition without the sequence first inside!

  There, hell

  Since the next generation of Adobe out our hole Creative Suite is to ventilate for no rational reasons...

  However, we work with a whole group with many parallel projects and would not be updated until we have finished our real projects because of the same issue, there was last year. Open files with new version caused you were not able to open the file with an older version... (speaking of the first).

  My question:

  I'm still working with first CC 2014 and after effects CC 2014. I import my first sequence in my AE project. Now, I want to create a demo of my sequence in it. There are many ways to do it. So there are for example the icon of the model, or you can do it with the menu bar.

  It creates the composition but without the sequence in it. I do not use anything. Not all fonts and even no animation. Import of simple dynamic links (not import itself, it is imported, but it does not appear in the model. Cannot move a drop, can't do anything with it).

  

  What's wrong? He worked for more than a year.

  Now the update is online, and because of these 'new' problems in CC14 you're forcing the user to udate to CC15! It's the feeling I get when suddenly the day of the liberation of CC15 my entire deparquement Suite CC14 is crush every 20 minutes just without reason... without giving me an option for an error report.

  On my Mac:

  iMac 2012

  3.4 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  NVIDIA GeForce GTX 680MX 2048 MB

  OS X 10.9.4 (13E28)

  Would be nice, if there is a rational solution for this.

  I had this problem again. And because all members of the support team supports so favorable, here's a way you can fool AE.

  Create a solid. Then right-click on the solid and select "replace images.

• First created in Windows projects are now without the publication correctly from a Mac

  I use the Windows of Captivate version for months without problems, set up a large number of course HTML5, inadmissible. A lot of javascript customized via 'Execute JavaScript' action for smartshapes, etc..

  I just bought a new Macbook Pro and then bought a subscription for Captivate license. Now my cptx files that worked very well when opened and published Windows CP publish very properly - the javascript does not execute, etc.. Everything * seems * fine in Captivate, but I get questions about preview/publish.

  Thank God I have 30 days to cancel the subscription and get a refund... but before doing this - has anyone else tried to switch to a Mac and are having problems with the Captivate projects?

  Both machines have 8.01 installed. The only thing I can think is, after installing 8.0 via the subscription download, then I have done the ' Check for updates ' and he went and downloaded and installed the update 8.01. When I did this on Windows, I followed the instructions on a blog post somewhere (sorry - I forgot the name!) who insisted on the removal of certain directories on the machine first before running the update. I assumed that the subscription files would be fixed/fixed...

  After struggling with this last night, I took a look again this morning and narrowed down and fixed the problem. Basically, it's what happened because of the issue and how I solved it. If all goes well it helps others in the future.

  Measures

  1. Create the project in the version Windows of Cp (I used version 8.01).
  2. For the needs of my client, who are quite unique and complex compared to the Cp typical, quiz questions custom project and scoring had to be developed. As (unfounded) classes HTML5 and Javascript is the most faster/more efficient way to do this, I used Javascript widely to quiz via the action "Run Javascript". So for the quiz questions, each answer is simply a smartshape (transparent, with the text of the answer in) that triggers the "run Javascript" click. In addition, on a large number of quiz slides are a incorporated Animate/HTML5 dashboard interactions.
  3. Worked fine on windows to publish. But when I opened up on a new Mac and published, if a question answer clicked nothing would happen.

  It turns out that the problem seems to be the text in the Javascript window. I think it is somehow corrupt, even if she seems very well. I had to delete literally, save it, and then copy it in javascript. Once I did it, it works.

  I have invested far too much time to this project so far, so don't want to take the risk of all most important questions arise like that, so I switched back to Windows and cancelled my subscription this morning. Fortunately, I have a license from my employer for Windows and who will use with Boot Camp.

• Satellite L300: How to record the sound from a video without sound

  OK, yes the title of the topic is not entirely clear. Here's my situation: I just bought a Toshiba Satellite L300 with Vista; Realtek HD Audio Manager is installed. I would like to record the sound of a video file using Goldwave (a sound editing program); but I don't want to have to listen to the sound, while it's recording.

  On Windows XP, you used to be able to record the sound of the stereo mix, but put the speakers on mute and it would record again. Now I find that I have to turn my speakers in order to record anything on my computer. (Yes, I fiddled with all mute buttons, insured that all reading and recording devices are working and front volumes. My current solution is to plug my headphones on my laptop and to reactivate the sound from the speakers to register... and not put the headphones in my ears)

  I have now spent in the last 4 hours looking for a solution, and I must say it's especially ridiculous. I used Vista before and I've heard rumors of how many people hate, but honestly, how is it that now the audio capabilities seem to be reduced?

  Does anyone have a solution of how to record sound with the speakers on mute?

  Hello

  I also recorded the audio of a video file using another software called 32. and Win XP
  I also used the stereo mix, but to be honest I have never muted the speakers while recording.
  To be honest I n don't know if it's possible, but if you want to test, you can try the Realtek HD audio Manager in the access panel and set the speakers to cut on the first tab called speaker.
  But as I said, I've never tested and that's why I m not very good if it will work.