Impossible for mulitple Digital Chart

Similar Questions

• "Error in initVXIlibrary. Impossible for kernel init device drivers. »

  Hi all

  I'm trying to fix a WAYBACK test system - running windows 3.11 with CVI talk to a box of 1261 B VXI Racal. Everything was fine until a VXI power capacitor has failed.  Astronics got the p/s fixed in a few weeks, but nothing has worked right since.

  Common symptoms are without note errors on VXI diagnostics display, but when the CVI application tries to start up we get the error message fatal "error in library VXI init. Impossible for kernel init device drivers. »

  I think that the message indicates a failure of communication between the communication MXI, one in the PC and the other cards in the VXI.  We tested both cards in another system and they work fine.  RESMAN does not Windows run and I have a DOS version to try.

  Someone at - he a clue as to what means the error message or what could cause this problem?  I drive 500 miles from Pittsburgh PA to Rochester NY Sunday to get their hands on this machine again and sure could use some help...

  Big thanks,

  Clancy

  WELL THE PROBLEM HAS BEEN SOLVED, IF NOT UNDERSTOOD - AT THE SUGGESTION OF THE SELLER, WE REINSTALLED THE DRIVERS VXI KIT.  HE TOOK SOME PLAYING WITH THE UTILITIES THAT WERE INCLUDED IN THE KIT, BUT THE THING SUDDENLY STARTED WORKING FINE.  I THINK THAT SOMETHING JUST NEED RESET AND THE RE - UP PILOT DID...

• Possibility to write a program for a digital indicator labels

  I see that there is a property node for the digital indicator that you can manipulate the tag with it.  After trying to use this feature, I get an error saying that you can change this functionality during edit mode.  My question is if there is property node to change the text why you can't it programmatically change?

  You must show the legend for the control and hide the label.  You can change the captions at run time.

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html

• my memory card for my digital camera does not work when I put it in the memory card slot

  I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

  Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
  then
  Device Manager
  Expand portable devices
  the type of memory card slots should be listed if your type is a yellow triangle in it,
  Right-click on it and choose uninstall.
  It should reinstall it automatically or when you put the memory card in the slot.
  This type of fault is often caused by not using material on the taskbar does not safely remove request.

• Y at - it an update for Microsoft Digital Image Pro 10 vs 10.0.612.0

  Is there an update for Microsoft Digital Image Pro 10 vs 10.0.612.0?  I just bought a new desktop computer that is running Windows 7.  My previous office was Windows XP.  I can open my photos in 10 Pro, but I can't do a SAVE AS.  In the upper left corner it States (read-only) behind the name of the file.  I think that it is telling me that my editing software is not compatible with Windows 7.  Is this true and an update of the software will fix this problem?

  The latest version is Digital Image 11, but it is not compatible with Windows 7:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Microsoft%20Digital%20Image%202006&v=Microsoft&UID=11&l=en&pf=0&PI=3&s=digital%20Image%20PRO&OS=64-bit

  Microsoft Digital Image Pro (formerly Picture IT) is not compatible with Windows 7. He was abandoned and was replaced by Windows Live Photo Gallery. You can download Windows Live Photo Gallery for free and install it on Windows 7.

  Windows Live Photo Gallery:

  http://www.windowslive.com/desktop/Photogallery

  You can also use the built-in photo editing Paint program. To open Paint, click the Start button, click programs, accessories principally made, and then click Paint.

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  Two editors of the most popular free photo with many features are related to the Sub - between the two programs Paint.NET will be easier to use.

  Paint.NET

  http://www.getpaint.NET

  GIMP

  http://www.GIMP.org/downloads

• CNAME or friendly DNS name for your Digital Media Manager

  Hello

  The problem we are trying to solve is how to announce a friendly URL for our Digital Media Manager device.

  We put our host name for something.its.deakin.edu.au, and the web interface of the device is accessible from

  https://something.its.Deakin.edu.au:8443

  We run DMM 5.2.2

  I would like to put something in place so that it is accessible from:

  http://digitalsignage.Deakin.edu.au

  I don't think it's possible through ports in use on the device. Go to port 80 via

  http://something.its.Deakin.edu.au

  results in a blank page.

  We have a Cisco content switching Module too

  http://www.Cisco.com/en/us/products/HW/modules/ps2706/ps780/index.html

  but because the device seems to redirect SSL strength that would be problematic.

  Are there other solutions out there?

  Long story short, I want that my internal clients to access the plug;

  http://digitalsignage.Deakin.edu.au

  without having to

  1 Add the address https in the URL (although I can live with this if necessary)

  2. without having to add the port to the end (8443 or 8080).

  How to make this happen?

  Any advice or suggestions are much appreciated,

  Kind regards

  Kathy

  Hi Kathy,

  You can get this behavior with a similar configuration in your SCM below:

  Serverfarm DARRONDO

  NAT server

  no client nat

  Redirect-vserver REDIRECT1

  WebHost relocation https://cdn-dmm-3.cisco.com:8443 301

  172.21.30.21 virtual www tcp

  development

  Vserver DARRONDO

  172.21.30.22 virtual www tcp

  Serverfarm DARRONDO

  rebalancing of the persistent

  development

  In this case, requests made to vserver 172.21.30.22 on port 80 will be redirected to https://cdn-dmm-3.cisco.com:8443. To make it more usable, you can have two entries DNS, one for the vserver and the other for the DMM himself.

  I hope this helps

  Daniel

• Where can I find a Windows 7 driver for my Digital DEClaser 5100 printer? Windows uses drivers for XP and Windows 2000, but I can't find one for Windows 7.

  Windows 7 Add printer does not find the drivers for my digital
  Printer DEClaser 5100.

  Use the XP drivers.

  Either use the XP machine as a remote client, add them to the Windows 7 machine or unzip the files in the driver.cab file, and use the disk and point to the ntprint.inf from the XP CD.  If you have Windows 7 64-bit, you should the drivers from 64 XP or Server 2003 x 64.  I just installed the x 64 driver PS.  Seems simple enough.  I think that this device emulates the HP LaserJet 4.  There is a version of the 5100 driver PCL as well Alan Morris Windows Printing team research here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• ORA-01858: a non-digit character was found here where was waiting for a digital

  Hi friends,

  Before posting inturn I have goggled on the question above, but looking forward for you suggestions.

  I have the data in the table that consist of two columns of date below

  

  when im trying to like

  TO_NUMBER (ROUND (MONTHS_BETWEEN (TO_DATE (C22_LASTPAYDUEDATE, "YYYY-MM-DD HH24:MI:SS), TO_DATE (C23_FACGRANTDATE," YYYY-MM-DD HH24:MI:SS)))))))

  Like the im getting the error ORA-01858: a non-digit character was found here where was waiting for a digital. How to solve this question friends.

  Thanks in advance.

  Kind regards

  Saro

  If C22_FACGRANTDATE and C23_LASTPAYDUEDATE are indeed 'two date columns', why are you doing a TO_DATE() on them? And why do you do a TO_NUMBER() to a value that will already be a number? Why not just do this:

  ROUND (MONTHS_BETWEEN (C22_LASTPAYDUEDATE, C23_FACGRANTDATE))

  If they are not the columns date (i.e. the DATE or TIMESTAMP data type columns), why are they not?

• How to recoveer the password for my digital signature?

  Hi I forgot my password for my digital signature which is different from my account password. Can you suggest a way to get it back or remove the current digital signature and create a new.

  Thank you

  Hello

  I'm sorry but there is no way to recover the password for the digital ID.

  You will need to create a new.

  Even if you do not delete the other, you could even create a new and use it to sign the documents.

  To remove the digital ID, please see the following link.

  How to remove the digital signature file (Acrobat Reader)

  Concerning

  Sukrit diallo

• I developed an Android application for a Digital Magazine with Digital Publishing Suite (Professional). Several weeks ago, I received this message from Google game: "we wanted to let you know that your app (s) listed below statically link against a versio

  I developed an Android application for a Digital Magazine with Digital Publishing Suite (Professional).

  Several weeks ago, I received this message from Google game: "we wanted to let you know that your app (s) listed below statically link against a version of OpenSSL that has several vulnerabilities for users. Please migrate your app (s) to a new version of OpenSSL within 60 days of this notification. From 07/07/15, game Google will block the release of new applications and updates that use versions older, not supported by OpenSSL (see below for more details). »

  I've updated the Android App using function Web app Designer, but they keep sending me this message. I don't understand what I have to do.

  Hi Sheila,

  If you connect to your Google game account, it will show you who sent you the warning to the apps. The generator on the web app produces Android apps which are not affected by this vulnerability.

  Neil

• I can't find the password for the digital signature. How to create a new.

  Several months ago, I created a digital signature. Now, I need and that you do not have the password. I don't know how to create a new. Any suggestions?  I'm not a person 'tech' so if you have any suggestions please make it simple!

  Hello

  I'm sorry but there is no option to recover the password for the digital signature.

  You can create a new one by following these steps in Acrobat Reader ms.

  Edit-> preferences-> Signatures-> identities Trusted certificates $-> more and click on "Add ID".

  You will see another dialog box and choose according to your requirement in case you want to create a new one by using an existing ID or with a new ID.

  Let us know hot, happening.

  Concerning

  Sukrit diallo

• I need consoldate my ID for Adobe Digital Editions 3

  I need consoldate my ID for Adobe Digital Editions 3

  You can reach your identifiers such as:

  https://adeactivate.Adobe.com/adept/en/JoinAccountLoginForm.jsp

• How cancel my creative subscription of clouds because it is impossible for me to do so by the Creative Cloud manage Plan (Plan details - Plan to cancel)?

  Hello

  How cancel my creative subscription of clouds because it is impossible for me to do so by the Creative Cloud manage Plan (Plan details - Plan to cancel)?

  Thank you

  Contact the Support from Adobe directly through chat or by phone.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• How can I reset my password for my digital signature I put in place earlier today for a bank loan, Signature authorization?

  How can I reset my password for my digital signature I put in place earlier today for a bank loan, Signature authorization?

  You cannot reset a password for a digital signature. If you have forgotten it, you will need to create a new.