CNAME or friendly DNS name for your Digital Media Manager

Similar Questions

• How gemfire locator can be configured to return the full DNS name for the customer?

  We have an index running before 2 cache servers,

  Locator.DomainA == > Server1.DomainA, Server2.DomainA.

  the problem is when the customer (customer. DomainB) try to access gemfire via locator, it up ' get: not connected to GemFire' exception, the reason is that the Client.DomainB uses the full name "Locator.DomainA" to access the gemfire, the Locator maintains only the servers host name, when the client runs the query, it access Server1 or Server2, but in this case, the networking is not connected.

  How gemfire locator can be configured to return the full DNS name for the customer?

  in gemfire.properties, Locator attribute is full domain name already.

  Thank you

  Yao

  There is a parameter for hostname for the customers that you can put in your cache.xml file cache-server element. It is a string that is passed the server for the location, and then on the Locator for the customer. You must set this client-to-host name in each of your cache servers.

• IP address or DNS names for verification?

  I try to run the check test and get two different errors depending on if I get my ESX hosts with IP addresses or DNS names. I found conflicting recommendations in this forum about which one works better. I checked my DNS configuration, / etc/hosts files and can ping ping and STAF names and IP addresses.

  Someone at - it recommendations?

  By its IP address:

  2012-08-20 17:09:13 UTC [TRANSPORT] [0] INFO: 10.128.210.53 host is running version 3.4.1 STAF...
  2012-08-20 17:09:14 UTC [TESTHASH] [0] INFO: treat VirtualMachine Setup...
  2012-08-20 17:09:14 UTC [TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  I found the following that thread is recommended to use names instead of IPs. DNS http://communities.VMware.com/message/2098962

  ----------------

  DNS namespace:

  2012-08-20 17:27:35 UTC [STAFSDK] [0] INFO: host service STAF on the branch vc51-testware with build number: 729061...
  2012-08-20 17:27:41 UTC [HAND] [0] ERROR: instance of test creation of evil, could not get the type of product for the esxia.corp.nexgenstorage.com host, result (RC: 6031 ErrDesc: host not found: ErrMsg: esxia.corp.nexgenstorage.com Exception: com.vmware.qa.staf.common.EObjectNotFound Trace: com.vmware.qa.staf.vc.host.STAFHost.getHost(STAFHost.java:6069) # com.vmware.qa.staf.vc.host.STAFHost.initialize(STAFHost.java:1951) # com.vmware.qa.staf.vc.host.STAFHost. < init > (STAFHost.java:123) # com.vmware.qa.staf.vc.host.HostSTAFService.getHost(HostSTAFService.java:4951) # com.vmware.qa.staf.vc.host.HostSTAFService.getHost(HostSTAFService.java:4909) # com.vmware.qa.staf.vc.host.HostSTAFService.handleGetHostValue(HostSTAFService.java:6571) # com.vmware.qa.staf.vc.host.HostSTAFService.acceptRequest(HostSTAFService.java:756) #) .............................................................................................................................
  2012-08-20 17:27:46 UTC Test FAILED

  Found another thread with this error which recommends the use of IP addresses instead of the name. http://communities.VMware.com/message/1904331#1904331

  The problem has been resolved in my site after seeing the new release note published in 9/25 below.

  Problem: Failure to properly configure host names generates the following error:
  Error: Cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS in the XML file.

  
  

  Workaround: ESXi host names add to vCenter Server as domain rather than IP addresses, for example, somehost.example.com. Make host names can be resolved Workbench, which is to configure DNS or/etc/hosts for name resolution and make sure the research front and rear work correctly. It is recommended that you go ahead and you enter the ESXi host names in the Workbench also.

  After I have change the ESXi host to IP address host name of the vCenter server. Correction of a problem.

• the replacement of the appliance for cisco digital media encode 2200

  Dear all,

  I have deployed the Cisco Digital media suite, including:

  1 x Cisco Digital Media Server include DMM Cast Module, Module signage digital DMM, DMM show and share.

  Now, my customer want to buy Cisco digital Media Encoder 2200 for event IPTV and live.

  I have check the Cisco product's end of sale.

  Please recommend the replacement of the product or the same third party features.

  Please answer me as soon as POSSIBLE because the pressing of this project.

  Best regards

  VO

  Now, my customer want to buy Cisco digital Media Encoder 2200 for IPTV and Live event.

  No it's not.

• Re: What is a driver name for Intel Matrix Storage Manager on the Qosmio G50

  Hello

  Does anyone remember the name of the driver that contains the Intel Matrix Storage Manager

  Hello

  Intel Storage Manager is a package that contains the SATA drivers.

  Intel Storage Manager can be downloaded from the page of European driver of Toshiba.

  Research of _Robson paquet_ on the page of the Toshiba driver!

  See you soon

• How to set an IP address manually and manual DNS servers for my printer HP Photosmart 7525?

  Cannot print.  EU of evil when the printer was initially put in place.  "Happytohelp01" Assstance solved the advised me; a manual IP address unBalayage DNS servers for the printer.  I did not write the information and now my printer is not working (it only worked for about a month), now nada.  I've had at the start of the connection to the web server problems - now its doing the same thing, but I don't know what IP Address and DNS to use.  Please help if you can.

  Hi @LaceyNo1,

  Welcome to the HP Forums!

  I understand that you are wondering, how to set an IP address manually and manual DNS servers for your printer HP Photosmart 7525. I am pleased to see that for you!

  After some research, I think I found the post, my colleague @happytohelp01, helped you with. In this post, Re: Photosmart 7525.

  Hope this is what you are looking for and have a good day!

• HP pavilion zv6000 - digital media player problem

  My digitial medial player does not read our SD camera card even if the card can be read by a USB SD card reader. We have the same problem with our HP desktop computer digital media player.

  I have download all the updates that I can find for the AMD processor, windows XP Pro, and digital media player.

  We tried several different SD cards but all are bigger then 2 gig I think that's the problem.

  When inserted, the system (Windows XP Pro) simply does not recognize the card.

  Is their a patch of firmware for the digital media player, I'm missing?

  Unfortunately, the maps of more than 2 GB are actually SD - HC, no SD they look alike and have the same form factor, internally, they are quite different.  Although in some cases, an update of the firmware can update a card reader, it is usually not possible (or at least most of the manufacturers do not try), I suspect that your USB card reader is of a more recent vintage than readers integrated computer.

  Unfortunately, your choice is to continue to use the separate drive or stick on SD cards that are generally limited to 2 GB or less.

• How can I know the FULL domain name &amp; names for the installation of a digital certificate Public in ISE?

  We are implemented a project with Cisco ISE; but comments Portal appears to users as a "untrusted site". For problems, a public digital certificate must be installed in Cisco ISE, so he can send it to users who enter the comments Web portal.

  Now... to sell me the certificate, VERISIGN needs to know settings ISE of the certificate, such as name of area COMPLETE, names subnames, etc... How can these parameters of ISE?

  Thaks a lot!

  This isn't an easy question to answer, there are a ton of variables to include

  Local web site Central Web Auth or Auth

  LWA, the WLC is the "man in the Middle" to the request of the customer for PSN (server nodes), the WLC takes the request webauth and resembles webauth then the redirect URL that you put in the WLC

  If the redirect webauth URL is https://ise01.mycompany.com:8443/guestportal/login.action, the WLC is a redirect but the virtual IP address comes in 1.1.1.1, who was as trustworthy or redirection complains, then you may have to get the public certificate for the fqdn of 1.1.1.1, and the comment server. You can create a CSR using openssl or you can just enter in ISE and create a CSR, but you can only set CN = ise01.mycompany.com and nothing else, as long you have a single NHP is good, but if you have several Ssnp, you need to change your CSR so that you have to use openssl to create CSR using a file openssl.cnf and then with openssl, you do the following:

  openssl req - new - nodes-out openssl.cnf omf-01 - ise04.csr - config

  You must do it the way I said above regardless of CWA or LWA, if you have more than one PSN, you must point to a FULL VIP domain name and then configure your DNS to answer for these host names. With LWA, you get virtual IP WLC involved 1.1.1.1, so you don't have to worry about getting a certificate for this, it is a cleaner installation, but you must always do all the rest. It must ensure that users of your guests have the opportunity to join the portal comments and be able to solve the given DNS the dns server that they have been configured with.

  Content of the file openssl.cnf:

  [req]
  nom_distinctif = req_distinguished_name
  req_extensions = v3_req
  default_bits = 2048

  [req_distinguished_name]
  countryName = name of the country (2-letter codes)
  countryName_default = en
  localityName = name of the locality (for example, City)
  organizationalUnitName = organizational unit name (for example, section)
  commonName = Common Name (eg, YOUR name)
  commonName_max = 64
  emailAddress = Email address
  emailAddress_max = 40

  [v3_req]
  keyUsage = keyEncipherment, dataEncipherment
  extendedKeyUsage = AutClient, serverAuth
  subjectAltName = @alt_names

  [alt_names]
  DNS.1 = guest.mycompany.com
  DNS.2 = guest.mycompany.com
  DNS.3 = ise01.mycompany.com

• Relationship with custom properties with friendly names for networks

  Hello

  Basically, I wanted to use the expression of value for networks, but using a friendly name for the network, as the network profile names would confuse the user.  We have created four areas (apps, web, db and gen) and 3 network classes (prod, dev UAC) for a total of 12 network profiles.  I have the expression works but it takes map a friendly name of "prod" to a profile of network specific to this region and class.  If an application server which should be prod you hit the drop down menus, but the "prod" would be effectively mapped vwire/network specific to the application server that are prod name.

  Any help is greatly appreciated.

  Well Yes, it's a common request.  You use the vCO to do the translation.  Your items in dictionary of properties will have the friendly name that the user selects and then you will run a vCO workflow during WFStubBuildingMachine that would make the translation and rewrite the property in vCAC for which network to place the machine on.  I'd be more than happy to build something that can do it for you.  According to the time available I can put together in a little later this week or early next week.  It's something that I wanted to blog in any case.

  -Sid Smith

  http://www.dailyhypervisor.com

• Firefox can't analyze my certificate while IE can. I imported my this at once, IE is fine, Firefox says that the certification is valid for the period of INQUIRY only, not the DNS name

  Details: - created a CA with PfSense - created server SSL certificates imported from my own servers (ESX, PfSense, email,...) -the authority of certification in Internet Explorer as a certification authority root of new trust - connect to my server with their local DNS names and receive the page without warning - any HQ in Firefox as a new authority - to connect to my server using the DNS name - a error message: certificate is valid only for 172.31.1.20 (the IP address of the server) - to connect to my server using Firefox and the IP address and receive the page without warning

  The AC is very good because it is used by IE and Firefox and even complaining, Firefox don't doubt the authority. The server certificate does not include the name, and can find it. It is true that when I created the certif, I added an additional field with the IP address. The certificate should be valid for both the DNS name and IP address. When I try to connect to the server with IE using the IP address, now it's THE who complains that the certificate is valid for the name :-)

  What should I do for Firefox to accept my certificate in his name and validate with the CA instead of making several exceptions for everything?

  This is the certificate sent by the server:

  BEGIN CERTIFICATE-----

  MIIF5jCCA86gAwIBAgIBBzANBgkqhkiG9w0BAQsFADCBgTELMAkGA1UEBhMCQ0Ex DzANBgNVBAgTBlF1ZWJlYzERMA8GA1UEBxMITW9udHJlYWwxDTALBgNVBAoTBEhv bWUxGzAZBgkqhkiG9w0BCQEWDGFkbWluQGpiLmxhbjESMBAGA1UEAxQJSkJfTGFu X0NBMQ4wDAYDVQQLEwVJVFNlYzAeFw0xNjExMTIwMjI1MjRaFw0yNjExMTAwMjI1 MjRaMIGCMQswCQYDVQQGEwJDQTEPMA0GA1UECBMGUXVlYmVjMREwDwYDVQQHEwhN b250cmVhbDENMAsGA1UEChMESG9tZTEbMBkGCSqGSIb3DQEJARYMYWRtaW5AamIu bGFuMRMwEQYDVQQDEwplc3guamIubGFuMQ4wDAYDVQQLEwVJVFNlYzCCASIwDQYJ KoZIhvcNAQEBBQADggEPADCCAQoCggEBAMWoRcxHoBjR2rKOPAI/dtpWlTiqOGDg zZZWJ6n24ZYUfh9L6vUmzqajfAbj6 + fndzKahb69PLi + tsnt39yGsKWkXUd3y7Wq 5PkaGSqi/mJKB7/H0qL4Ig2FK9/uK9QGK019NvDN1jnLgF6MoNAIZEOVjqalpnXD O8Eu + vaKPsHbvNziNj7uQR8CdcMU9lEF6gcmFu8xOrukb3ocpyJ307PHqx3AlrU0 sBuit21glineB9XKMyBaon9D3mrNUXmvHy3xcBvHPwcgqnNDKd7CZwdfaXw4Hb4i t7BYgSsn66UxPcrDvoho9aDbXnjmOuPCo/FMsZxfr9ETZyGIllsXE2UCAwEAAaOC AWQwggFgMAkGA1UdEwQCMAAwEQYJYIZIAYb4QgEBBAQDAgZAMDMGCWCGSAGG BEI DQQmFiRPcGVuU1NMIEdlbmVyYXRlZCBTZXJ2ZXIgQ2VydGlmaWNhdGUwHQYDVR0O BBYEFEILwkf/4I50YT + fZ/2wcETS6CBVMIGuBgNVHSMEgaYwgaOAFEgmUROxoVJM txyWvypJ4wcF8B2RoYGHpIGEMIGBMQswCQYDVQQGEwJDQTEPMA0GA1UECBMGUXVl YmVjMREwDwYDVQQHEwhNb250cmVhbDENMAsGA1UEChMESG9tZTEbMBkGCSqGSIb3 DQEJARYMYWRtaW5AamIubGFuMRIwEAYDVQQDFAlKQl9MYW5fQ0ExDjAMBgNVBAsT BUlUU2VjggEAMB0GA1UdJQQWMBQGCCsGAQUFBwMBBggrBgEFBQgCAjALBgNVHQ8E BAMCBaAwDwYDVR0RBAgwBocErB8BFDANBgkqhkiG9w0BAQsFAAOCAgEABCFChNXJ ACISI + 7hNbpiwIsjpDB0fLKB/9sPXC1uiwzGv7o/fkImYPJzQcKP0a3V6elX4kd7 x1poYAfawVIpKJgwzgEWnMJADgPKVMymkxBr3Qlq + 3oAiC4pTdI79GKaZKshxANS 7OBoklRDYWStHnCdw96IWuu6Ih2mbsbRVUFIJnHPHpCFS1J45tLYWoxPL/L1uX3v /Pz8SollYXtZ +. uVhdkkzJcHcEsZjvBe3eMmxm93l7Cy/5kCDf2 + kx67weNRrxbFt VaEyFCypCJlJn4Gj17y0JnhPUN1/h7Ck4XcTLX28 + Ab2Ls9/rXnXMQvkKcrRhvyT CV4XJ756hap/zT + KJJzY8 + T5ggdkKlcbZsvvgVSuNNv1aSQmR + bbF5ry23oszXVO FaEEAtcofaHa5MMebNNWrz4o/qYuPGBnVq3NmxiNNKm + / Ed5ky4AdkXT7Ny11mgA C2DzGahyXfbfGFa21ig/R0NAxkP00TXWiuSE/7 b/EGe9qNDB + WF7Qb5I9U6EoWYZ EEmE8G/43ClaZCorJJN7iZwwMx2iQJgyuea hy9hgXU5GjmXmrpqmtvyGxrywalcXPzvFOs + aSXf1H2tLSMc9n3LH8g0lDgpcC6P484ef1cmG3/hVD5QLWyjblMnF0XjbMyij5Hj eTrPLTwW8AYjoIz0DZRoVPxpdz/o =

  CERTIFICATE OF END-

  This is the certificate of the CA that signed it

  BEGIN CERTIFICATE-----

  MIIGbjCCBFagAwIBAgIBADANBgkqhkiG9w0BAQsFADCBgTELMAkGA1UEBhMCQ0Ex DzANBgNVBAgTBlF1ZWJlYzERMA8GA1UEBxMITW9udHJlYWwxDTALBgNVBAoTBEhv bWUxGzAZBgkqhkiG9w0BCQEWDGFkbWluQGpiLmxhbjESMBAGA1UEAxQJSkJfTGFu X0NBMQ4wDAYDVQQLEwVJVFNlYzAeFw0xNjExMDYxMTQzNTJaFw0zNjExMDExMTQz NTJaMIGBMQswCQYDVQQGEwJDQTEPMA0GA1UECBMGUXVlYmVjMREwDwYDVQQHEwhN b250cmVhbDENMAsGA1UEChMESG9tZTEbMBkGCSqGSIb3DQEJARYMYWRtaW5AamIu bGFuMRIwEAYDVQQDFAlKQl9MYW5fQ0ExDjAMBgNVBAsTBUlUU2VjMIICIjANBgkq hkiG9w0BAQEFAAOCAg8AMIICCgKCAgEAtRfmJ8HhxD6OeBSTdiK36DF/Gw7HmOIO CN9LktUCcnXZfsbkyPwGq8AtLTURfYU1VKHw066g0XD0hEbFEaYIWvVKijiqaPZg Pc / pIAj + M7vzojeCnv6QiRTcC9q5rY9 + Ff7MuTkWKEPzjuXpHd + IoS4To3sVZgsy YcxrdRndcirxm6aFjGXIYaImPm3hLuMteSagacsjduGEDOpJ5hJoMIIX4kHE/x8J DFBvlllXIGiOgCHU + 8hcN1IadNFqQcWA3eFB5SgLPFxOOmR4xpB1LsrESC4Zgk/E XmZYBCsYHzg58Cq6r4xuwckutcd5Gjo9ujaafCfAlUFHFJxqLxyy + N0nd3P + i5Kd zPpwpyIAzOCPeZvM2chspspl3pER + RlqZODLoU3gSAz4z + knxKxeyyiK8cttMHkV Di5veqSRIxYeYtJqu0asEaBiQ0ZpdqsNcQEU3rwzo6uoxxgvRr2Ujb6csr8CqhuA 2Sz0W1upgcpZhuL0VMTkMS8P8fgzZZeIU85v7drldXsvpjzaMwHdm/MKGewA0eCZ fUTI6V + uY9oaT9GH8MPzGWzB4oYb3sRgKgLkvWGckyHe3YVwUpb4z/MXRFB3bN/Z qxIyochY8pJMcJe2jrTw79Sf9FAR/txonPBAxuNtGLIdcL4ElGjlXPDXlQrI8XbI n/Abbs3iFHsCAwEAAaOB7jCB6zAdBgNVHQ4EFgQUSCZRE7GhUky3HJa/KknjBwXw HZEwga4GA1UdIwSBpjCBo4AUSCZRE7GhUky3HJa / KknjBwXwHZGhgYekgYQwgYEx CzAJBgNVBAYTAkNBMQ8wDQYDVQQIEwZRdWViZWMxETAPBgNVBAcTCE1vbnRyZWFs MQ0wCwYDVQQKEwRIb21lMRswGQYJKoZIhvcNAQkBFgxhZG1pbkBqYi5sYW4xEjAQ BgNVBAMUCUpCX0xhbl9DQTEOMAwGA1UECxMFSVRTZWOCAQAwDAYDVR0TBAUwAwEB /zALBgNVHQ8EBAMCAQYwDQYJKoZIhvcNAQELBQADggIBAHVLp0nsXNHjvcjWado0 v1M167gEv8SnLMzDRJ7rOwfQlG0JWIXgrMk + 9bLQixFPbClG2MzOGhq2gyXbTFEH PYLfOxRy5gsrYhBYKso4PNrP8ouBaedl / + huobFtd1SR4bNrZ5Be3crQkZhULmlv hSVWklOC + o0rdfPnDffDRtoWH1x1 / + ZRS0N0MSwXqeoQTEgu9CYRCEeLnidcdd1v e6XR + Qw2qLfPqBCKzCVNGZvpVjqakERxaLgWPqwixIQ4sdPjvtnUJxsUEo5hN + 6 / + os/HZ1iO3Bgi6DgAGToTSmsf5 + pI/z + o2FjDrDvbBhvf4FulvvOCsRBNkA5BK NgisFXP / FN3WlkrbM1OZjWIan1phQAw5mDLfqwxJE + BuedK1HqLRNTay9eOGSRSu TRIi26fwwMAdsPnDj3X7/aUCWslVrvZPRmsIOgykLuHlCgYD99mpzF0v + t8y05iE V3115CCve + qFHH52j078jxo1aKyfQTnRGvdGehWI77Pd/l9CMgNJ7K0ZRx6RUoEV 9CMH6kgqagkXU7eT2CXszxrGHAgybnNaJ/z4BjxDme0TH3bgLc4AOIiP8doe7KlJ lYvrG8UMtCkL1jhYFX4Rz/BH5yte7aqzwBVUZrcmvM2gU9ZyPNaAfCDygCUMeMqt OWQEicvGZtRj2ZK6PKv5hk0a

  CERTIFICATE OF END-

  In Firefox, a list of other names of the non-empty object overrides and replaces the common name field. If you need to list all the relevant host names in the field of SAN in your certificate.

• Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thanks, paul

  Question: Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thank you! Paul

  This looks like a problem with your email service, not with Firefox (or Thunderbird).

  It is possible that you need to set the name sent by logging into your webmail account online (e.g., Yahoo! Mail or Gmail). Web e-mail providers like these often put sending appoint themselves, ignoring the settings of your email client.

  Unfortunately, since it is not a matter of Firefox you're unlikely to get help on these forums. I suggest that you find the support site for your e-mail provider, as they should be much more useful.

• I developed an Android application for a Digital Magazine with Digital Publishing Suite (Professional). Several weeks ago, I received this message from Google game: "we wanted to let you know that your app (s) listed below statically link against a versio

  I developed an Android application for a Digital Magazine with Digital Publishing Suite (Professional).

  Several weeks ago, I received this message from Google game: "we wanted to let you know that your app (s) listed below statically link against a version of OpenSSL that has several vulnerabilities for users. Please migrate your app (s) to a new version of OpenSSL within 60 days of this notification. From 07/07/15, game Google will block the release of new applications and updates that use versions older, not supported by OpenSSL (see below for more details). »

  I've updated the Android App using function Web app Designer, but they keep sending me this message. I don't understand what I have to do.

  Hi Sheila,

  If you connect to your Google game account, it will show you who sent you the warning to the apps. The generator on the web app produces Android apps which are not affected by this vulnerability.

  Neil

• DNS settings for the intranet server is not not a DNS

  I have an OS X server that services the on the local subnet (behind a NAT).  We have moved to a new office and installed a new firewall / local DNS and all other machines can resolve names of local computer.  But the OS X Server solves only them to the machine gateway/firewall, rather than solve them for local machines.

  If I disable the server App DNS, resolved names.  But I seem to remember that I'm not supposed to do disable the OS X Server DNS, set it instead to forward requests to the gateway.  Unfortunately the Google Machine isn't helping me, because every sentence google I can think on OS X Server and DNS settings show how to use your OS X Server as a DNS server for the computers on your network - which is not what I want to do!

  Which, in my view, should run is listing the gateway as a forwarding server, then tell machine OS X to "Search for only some clients" and "The Server itself" selection in the dialog box "Edit Search Clients.  But it does not work.

  Any help appreciated, thanks.

  Two things you need to do:

  You must configure the host/domain name on the server and/or point the DNS address in the network preferences for 127.0.0.1

  Once you tell the server to perform searches in its own recursive cache/internet to 8.8.8.8 * or your dns public server here *, then it stops to pass requests to the gateway.

  Then set your DHCP server to serve IP addresses in DNS (10.0.0.5) servers to clients.

  Example:

  * Client DHCP address request *.
  10.0.0.10 - IP
  255.255.255.0 - mask
  10.0.0.1 - gateway
  10.0.0.5 - DNS

• Media Player error: IWindows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  =========================================================
  Best bet would be to download and install the free software
  VLC media player... it should play the video without the
  you need to change the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win64.exe)

• Where can I find c#-function-names for NI Vision project

  Hello

  I created a project work in NI Vision Assistant 8.5 and now I want to do the same thing as the DLL in c#

  The only problem is where to find the names of the functions that I gave to use.

  Currently I m doing:

  1 extract HSL - Saturation

  2 threshold

  3 image mask of the KING

  4 circle detection

  Detection of circle returns x, y, RADIUS, which I use to select pixels in the original image.

  5. from these pixels, I need to get RGB and luminance

  Can someone help me find the right language c#-orders or tell me where to find them.

  Thanks for your help

  Best regards

  Hello

  I found an article which deals with errors that may occur when you try to use CWIMAQ in your .NET application controls:

  http://digital.NI.com/public.nsf/allkb/C3E2D0E6DD034708862572A00077B625?OpenDocument

  I would also try to search for the cwimaq. HTML file which is located in the NOR-Vision documentation folder that I recommend the last time.

  I'm sure you will find the features you are looking for here.

  Let me know if it worked.

  Best regards

  David