Impossible to activate her comment and measurement functions

Similar Questions

• Activate the comments and annotation in interactive form

  How can I enable comments and annotation in an interactive form? When I open the form in Acrobat, Enable for comments and the analysis is grayed out.

  Hello

  You can activate the static PDF forms or flat PDF to add comments. If your form is dynamic, you will not be able to enable comments.

  Discover for example at http://cookbooks.adobe.com/post_Using_LiveCycle_Forms_in_Acrobat_and_Reader-16518.html

  Good luck

  Niall

• activate the comments and annotations

  Hi all

  We create postscript files and then having the Distiller convert files to PDF format.

  A user of adobe reader 9 attempts to use comments and annotations to write his comments etc...  Until recently when it was upgraded to 9, he can't add comments.

  When I create the PDF file I put no restrictions on that, because I never put safety.

  I checked the properties of Documents and the 'comments' is listed as 'not allowed '.

  This is not the forum to distill. Distiller questions are answered in the forum of Acrobat. This forum is for questions on Distiller Server. To answer your question, Reader users can't add comments unless his comments is enabled by Acrobat to a specific pdf file. It is different from that defined that see you in the properties of the pdf that allows the content creator to ban comments prohibiting the comments for users of Acrobat.

• Impossible to activate my Lightroom and Photoshop

  Hi all

  I am extremely disappointed by the service from Adobe.

  Since Thursday, after the purchase in order to renew the license of the creative photography Plan cloud, I am unable to reactivate my Photoshop and Lightroom!

  During these FOUR DAYS, I had tried all kinds of way to reactivate < signing in and out, uninstall and install, you name > but I am unable to use the application ENTIRELY.

  I even called the hotline. They have advised me to wait 48 HOURS for the system to change to activate the RENEWAL PLAN. FORTY - EIGHT HOURS had PASSED, I have made the payment on 30/06/2016, at about 16:00 (Singapore time) and so far I am unable to use it.

  Please let know us, how can I go on reactivate my Adobe application, because she always reactive to the old plan that is already EXPIRED. Don't tell all kinds of way same as logging in and out and uninstall BECAUSE I HAD TRIED EVERY DAY.

  Thank you!

  This is a users forum, about the details of account you're going to wait for the official personal Adobe address this issue you, or it's better you collate Support Adobe:

  Click on the button still need help and select the Chat option:

  Contact the customer service

• T30: impossible to activate the standby and hibernation

  I installed a fresh copy of WinXP SP2 and most essential drivers (including all drivers related to food, that I could find for T30 IBM).

  Windows reports that either standby or Hibernate are supported by the system. How can I activate them?

  This proposal helped me: http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&message.id=6890&query.id=3746...
  All I needed was to install Lenovo drivers for the video card by application of system update.

• How to activate the sleep and Hibernate functions?

  

  I think the image to explain my problem!

  Hello

  This should help you.

  "Sleep and extended: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  See you soon.

• I have a license to cs3 Middle Eastern version, the hard drive broke down and had to be replaced and reinstalled. Impossible to activate it maintains a maximum number of licenses Please Help

  I have a license to cs3 Middle Eastern version, the hard drive broke down and had to be replaced and reinstalled. Impossible to activate it maintains a maximum number of licenses Please Help

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I downloaded lightroom 5 for mac and it is impossible to activate a lightroom3 update

  I downloaded lightroom 5 for mac and it is impossible to activate a lightroom3 update

  The only way you would be able to improve Lightroom 3 Lightroom 5 is if you can find a version upgrade to purchase from a third-party vendor. 5 Lightroom is no longer sold by Adobe. The path to upgrade for you would be to 6 Lightroom Lightroom 3. This upgrade is available for $79 in the United States.

• Impossible to activate Photoshop CS2 despite good numbers and drive

  Impossible to activate Photoshop CS2 despite the disc and the right numbers

  Please uninstall the current version of CS2 you have installed. http://helpx.Adobe.com/Creative-Suite/KB/uninstall-Creative-Suite-CS5-CS5.html

  Then go to this link and follow the instructions to download a new version of CS2 and a new series to use:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate touch id on this ios ipad 10

  Hello

  I have updated my Air 2 day before iPad and from my iPad slow, battery down faster and worst of all I get this warning on the screen, (impossible to activate touch id on ipad) try to reset and add the new fingerprint, but it does not at all. It's the product of 2 years and this bad with the new iOS n slow down in case of failure.

  Apple says it's best iOS, for me the worst until this iOS...

  any idea anyone?

  Hi Cacsh,

  I see that you post today because you are having a problem getting ID of contact set up on your iPad 2 Air. I also see that you encounter some problems related to the slow-running and your battery drains faster that you expect. I would like to help with these issues.

  To solve the problem you're having with Touch ID, I would recommend following the steps listed here:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not type too fast or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Go to settings > Touch ID & password and make sure the Unlock iPhone or iTunes and App Store is on and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  Use the ID Touch on iPhone and iPad - Apple Support

  Regarding the slow performance issue you mentioned. have you noticed what is happening with any specific application? I would like to gain a better understanding of this issue before providing specific recommendations. To answer your concerns about the battery life, take a look at this document for more information on how to monitor your use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To get tips on maximizing the performance of your battery, take at look at this resource:

  Batteries - maximize Performance - Apple

  See you soon.

• Is impossible to activate windows xp! Activation window empty.

  Is impossible to activate windows xp! then, because I don't want to use windows 7, please help!

  I activated the front windows, a long time ago, but now it says I do not have, so I can't just acitivate, right? but here's the problem:

  When I click on "Activate windows" in system tools, it comes through the window, but in the window, there is nothing in it, no words or pictures, just a blue background, what can I do! ??? He must have three choice for me, we're activate online, one is by phone, we're not to activate now. but my situation is nothing! Nothing in the window, except two small picture to the left and right to the top of corner, the small image has a square, circle and triangle on a large white rectangle.

  Please HELP ! I have 2 more days to activate!

  Hi KhaBL,

  You cannot use a CD to install on another computer. I suggest that you contact the manufacturer of the laptop if you do not have the installation CD computer laptop with you.

  You can also contact Microsoft telephone support.

  Help and Support - Windows XP

• Comments and account standard failed to load

  My dell laptop-1569 win 7 64 bit
  When I try to load comments and standard account, don't charge not bot log off... there in the problem of the OS?

  It looks like their profiles are corrupt.

  See the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 6 method that solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, post it here; I'll keep an eye on your question.

  - - - - - -

  To review when you are done to fix the problem - remember to leave comments disabled account and create a user account Standard called visitor with a password set in place that allows you to control which other people have access and that they have access to.

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry