T30: impossible to activate the standby and hibernation

Similar Questions

• Satellite M115-S1061 - how to activate the standby/Hibernation mode

  I recently got a laptop from my father and the settings are a bit strange.

  My modes standby and Hibernate are also well off and due to the lack of a cooling device, it constantly turns off when I leave.

  So whenever I leave, I have to shut down my computer, then restart again and his old fact.
  I need to find a way to get my laptop to activate the standby or hibernation mode so I can't go through this process each time.
  Its a Toshiba Satellite M115-S1061.

  Also, I checked the options of standby power, and they say the same things as well.

  Thanks in advance for the help!
  -trueway44

  Hello

  The history is confusing for me.
  Just a few questions to the beginning:
  What operating system do you use?
  You use Toshiba power saver or power Windows options?

  If you know that this laptop turns off when you leave why do the restart if you know it goes off even when?

  You let your laptop with no activity, or you leave while an application is running?
  Maybe is related to overheating decommissioning.

• Satellite A200-14F - standby and hibernation does not work

  Hello
  I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

  I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

  If you have had the similar problem please write what I have to do.

  Concerning

  Hello

  > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
  After Installing Win XP, you must update the BIOS to the XP version.
  You should check the page European driver of Toshiba. There are BIOS for Win XP.

  After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

  Welcome them

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• How to activate the grammar and punctuation of keyboard

  My question mark is a letter in Spanish, how do I activate the punctuation and grammar on the keyboard

  I looked here layouts of different Spanish (and french) keyboards (http://msdn.microsoft.com/en-us/goglobal/bb964651.aspx), but none had a letter where is the question mark.

  Install the US-International keyboard. Start - Control Panel - regional and Language Options - languages - details - add. Then, check the key parameters to change keyboards or turn the language bar (advanced text Services cannot be disabled).

  It works in two modes. Right Alt or Shift + right Alt + another key and also by pressing the keys dead (such as accents). On keyboards, the Right Alt key is called Alt Gr.

  Right Alt is the same key as Ctrl + Left Alt on the US International keyboard, and on almost all keyboards except the standard US keyboards where the keys left and right are treated the same. There is a reason why Ctrl + Alt must not be used to define keyboard shortcuts. Also F12 should also not be used for hotkeys since it is reserved for the attachment of a debugger.

• I have to restart my computer every morning to activate the keyboard and mouse sometimes.

  I have to restart my computer every morning to activate the keyboard and the mouse

  Hello

  1. What do you mean exactly by activating the keyboard and sometimes the mouse?

  2 are you using the keyboard or mouse wired and wireless?

  3 since when are you facing this problem?

  4 you made any recent changes?

   

  I suggest you to give us more information about the issue so that we can help you better.

   

  It will be useful.

• How to activate the stylus and touchscreen Windows 7?

  How to activate the stylus and touch in windows 7? If it displays "no net and enter key is available for this view.

  Please tell me from the beginning on this topic...

  If this screen does not have a sensor to detect the pens or touch, you need to go buy a new touchscreen compatible.

  But if it worked before, then you probably have a driver installed.  Go to the website of the company that builds your screen, and search for downloads.

• I had purchase cc all apps for students / teacher and then I received the receipt e-mail. But it is not activate the license and subscribe. How can I activate it?

  I had purchase cc all apps for students / teacher and then I received the receipt e-mail.

  But it is not activate the license and subscribe.

  How can I activate it?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html