Impossible to activate my NETWORK card on my new Satellite C660D - 10M

Similar Questions

• ESXi - impossible to activate a vmnic card

  Hi all, I have a problem on my server ESXi...

  I would use two physical network interfaces to connect to my server to two different networks.

  I tried to set up two separate switches, logically related to two separate network interfaces.

  Unfortunately, as you can see in the photo below, vmnic1 is down. I do not understand why!

  I'm sure that the cable is connected (green LEDs are lit), and a DHCP server is available on that port.

  Please help me as to whether my vswitch configuration is correct

  Thanks in advance

  L.

  

  Welcome to the communities.

  1. what Server/NIC hardware do you use?

  2 is. the physical switch port where that NETWORK card is connected to the link autonegotiation value?

  3 you have the vmnic on the side of ESXi to negotiate automatically? (see screenshot)

  4. can you connect using a different device (laptop, etc.) use the same cable/physical switch port?

• network card wireless on toshiba satellite 2410-702

  Dear Sir.
  I have a laptop Toshiba Satellite 2410-702 and I have a problem with the wireless network card. the operating system running on the laptop's home with the service pack 2 for windows xp.
  In Control Panel-> system-> hardware-> Device Manager in "Network cards" is not the "wireless network connection". I tried to install it adding a new hardware devices with the drivers I found on cd-rom, but I couldn't manage to install it.
  How can I solve this problem?
  Thanks in advance,
  Best regards
  Fulvio Ormas
  PS: the drivers for the wireless network card I downloaded from the official website of toshiba are the same as the drivers I have on cd

  Hi coots

  I'm not sure but I think that your machine is delivered without wireless card. Did build in one?

  There is possibility to expand your laptop with wireless card and in this case, you can download driver. Please be careful with the drivers. Ago on the Toshiba site driver for Wireless LAN card produced by Toshiba.

• Wireless network card mini pc to Satellite S1410-S102

  I have a portable Satellite S1410-S102. I would like to install a wireless lan pc card. But what wireless lan card I install.

  I use a Netgear DG834G router v2. Thanks in advance

  Seems you can use different network card that supports the 802.11 wireless standards B.
  I discovered that you can use the reference number of the wireless LAN card Kit: * PA3212U-1MPC *.
  You can google using the part number to find the compatible wireless network card and some dealers who offer this part.

  Concerning

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• Impossible to install the network card for Virutal Machine (WINNT)

  I have just Converter a Windows NT of the physical machine in ESX server. Then I added a network adapter for the virtual machine, but it seems that the virtual network adapter may not be recognized by the Windows NT system.

  Please tell us how to install a virtual network adapter for WINNT.

  Qucik response you will be highly appreciated.

  Hmmm... strange, so I'm guessing that you use not NT4 service pack 6 as your installation CD.

  If you cannot use the latest service pack, you should always be able to get from the amd website.

  For example, try: here

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• BlackBerry Smartphones impossible to activate the old account to a new device

  Hello. My Bold 9780 has got the white screen of death. I sent for fix, but while what is happening I have switched back to my old Bold 9700. When I try to move my old email account it says to put my password by e-mail. I put the correct password and when I press activate it says "sorry, impossible to continue your session. Please log in again. "I tried loging again several times but it still does not work, what should I do?

  Hey Optimus_Prime456,

  Welcome to BlackBerry Support Community Forums.

  To resolve this issue from the browser on the BlackBerry test visit www.BlackBerry.com/integrate to setup e-mail account you.

  Thank you.

• Old computer crashed; Impossible to activate the product key on the new computer

  I am a student at Sheridan College and received a product key to install Creative Cloud free. Creative cloud is already installed on an old computer that broke down; There is no way I can disconnect or uninstall creative cloud on the old computer. So I bought a new computer, but when you try to use the product key to activate one of the Cloud Creative applications, Creative Cloud tells me that the key has already been used. I don't know if there's a way to disconnect from creative cloud on the old computer. I don't know if I just e-mailed my product key Adobe, they can just activate creative cloud to me. Tell me if it would be useful to give here my product key. I use Windows 10. Thank you for your help.

  You can try to contact Adobe support here:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_account-settings _stillNeedHelp

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• Config of respectable with 2 network cards

  Hello community,

  I have virtualized a Windows XP Pro SP3 which had 2 NICs for different network connections 2.

  Sum one could it me if I need also to install 2 network cards on the new Windows 2008 Server std to have the same networks installed in 10 work stations.

  I have used several times with a single network, but never virtualsation with 2.

  I wonder if I have to use 1 or 2 connections IMO and where I have to configure in the workstation.

  Best regards

  DPE_Irel

  TommyFreddy wrote: you must have two NICS and also ensure that all are trigger guard. Network connection VLAN different you adapter.

  @TommyFreddy, what you had to say offered absolutely nothing different, then what Richardson Porto and I together have already said!  For example, I exposed on what Richardson said Porto by adding additional information expressly excluded by him.  If you do not have something to say then what has already been said and then refrain from jumping and parroting what has already been said!

• Impossible to activate my Vista wireless network card

  I replaced a broken network PCI adapt with a Belkin USB wireless adapter.  I installed everything, restarted, and now my computer can't find any networks.  I open network connections and tried to repair.  When I 'Reset the wireless network adapter' it indicates a problem still exists. As it is said 'Belkin 54 g Wireless USB Network Adapter' knows driver or hardware related issues.  I've already updated the driver for the latest driver.  When I go into network connections and right click on the connection for Belkin 54 g wireless, I try to activate with no luck.  I also try to activate Device Manager with no luck.

  I came to the conclusion there is that some conflicts causing the wireless network adapter to not 'activate' or activate.  What is the problem?

  Hello Brent in Texas.

  O what is the status of the wireless network adapter in Device Manager, you see yellow exclamations or the fringe?

  The error code indicates that the drivers are not installed for your wireless network card.

  You should try to uninstall and reinstall the drivers for your network card wireless instead of updating the drivers. Make sure that you remove the previous version of the driver and install the latest version.

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "network adapters, double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your driver CD. After installation, create the connection.

  Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.

  You can read the article that will give you all the steps to troubleshoot network connectivity issues:

  http://support.Microsoft.com/kb/936211

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think

• My wireless network card is disabled, and I don't know how to activate it.

  My wireless network card is disabled, and I don't know how to activate it. I have a laptop HP Pavilion Dv9000, which originally had Vista but I installed XP Professional on it. According to Wefi all I had to do is click Start and then click on connect to and right-click on wireless connection and click Activate. My problem is when I click on start... There is no connect to click the button. Anyone know where I can find my connect button?  Thank you!!

  Hello

  Try changing your preferences in the start menu.

  Click with the right button on the task bar > select Properties > start menu tab > and make sure that this Start Menu, menu classic start no is selected. Then check to connect to.

  Or, go to control panel > network connections. Find your wi - fi adapter and right click, select Enable.

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to install laptop HP Pavilion dv6-6041tx PC wireless network card?

  I can't install the wireless network card

  I tried several drivers

  RALink 802.11 b/g/n WiFi Adapter

  Microsoft Windows 7 Intel wireless drivers

  Wireless Intel, Intel PROSet and Intel my WiFi for Windows 7 drivers

  Intel PROSet/Wireless WiMAX for Best Buy software

  I tried to install the more more, but they do not seem to work

  so I was hoping someone could help me find the one suited?

  Hello:

  Yes, it's exactly what I asked you to find.

  Here is the link to the wireless card driver you need.

  Without guesswork necessary when you have a hardware ID.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  This is usually a card without wireless/bluetooth combination, so you also need this driver for BT:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131427-1&cc=us&DLC=en&LC=en&OS=4063&product=5273547&sw_lang=

• I can't activate my Dell Wireless NETWORK card.

  It says it is disabled and that I have to press a switch, but I can't find any switch on my computer.  It is an internal card and my laptop only 1.5 years.  However, I have no support from dell more via internet or e-mail and I'm in Israel for 2 months, so I can't call.  I tried Fn + F2, but that no longer works.  Randomly, it only works WHILE I was on the internet using the wireless feature. I think that it failed because the router but the router working again and my laptop is not yet. Help, please!

  Hello

  Connect to the laptop support page.

  Download the manual and search for instructions how to activate the wireless card.

  Also look at the BIOS, it could be that he got disable it too.