ESXi - impossible to activate a vmnic card

Similar Questions

• Impossible to activate my NETWORK card on my new Satellite C660D - 10M

  HY

  My laptop (Toshiba Satellite C660D - 10M) supplied with Free-DOS. I installed WIndows 7 and all the necessary drivers from Toshiba Web site except the driver for my network card. I can't go to the Internet because of this!

  From this page: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  I get the correct information:

  Laptop - Satellite - Satellite C - C660D - PSC0WE series - Windows 7 32 bit.

  (A) it has no CHIPSET driver for my laptop here? But I think they are merged with the DISPLAY DRIVER and I could install their own.
  (B) DRIVER LAN - after installing this driver in my DEVICE MANAGER-> network controller has an exclamation mark and is not installed.

  Check the BIOS - enabled.

  Uninstalled, found my specific NETWORK card driver from realtek website. Realtek RTL8139/810 X Family Fast Ethernet. -> Installed the driver for win7, - NOTHING!

  I don't know what to do next?

  Please can you help me?

  Some similair problems:

  -http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/e093d50d-e702-4c9b-8906-977cd4294475
  -http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/6af7ac06-02ff-4417-9d41-e320a6be1a11
  -http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/83fee7bd-1af3-4fa8-b664-9af8ce78e750

  You're right about driver chipset. By AMD based laptops it is integrated with the display driver.

  The same LAN card has Satellite C660D PSC0UE so the right Win7 32 bit LAN driver you can find HERE. He has to work. All available drivers are put to the test.
  Please test and send feedback.

  Have you installed driver WLAN?
  Make sure that the unknown device in Device Manager list is certainly related to LAN and WLAN not the card.

  Bok ;)

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• Impossible to activate touch id on this ios ipad 10

  Hello

  I have updated my Air 2 day before iPad and from my iPad slow, battery down faster and worst of all I get this warning on the screen, (impossible to activate touch id on ipad) try to reset and add the new fingerprint, but it does not at all. It's the product of 2 years and this bad with the new iOS n slow down in case of failure.

  Apple says it's best iOS, for me the worst until this iOS...

  any idea anyone?

  Hi Cacsh,

  I see that you post today because you are having a problem getting ID of contact set up on your iPad 2 Air. I also see that you encounter some problems related to the slow-running and your battery drains faster that you expect. I would like to help with these issues.

  To solve the problem you're having with Touch ID, I would recommend following the steps listed here:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not type too fast or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Go to settings > Touch ID & password and make sure the Unlock iPhone or iTunes and App Store is on and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  Use the ID Touch on iPhone and iPad - Apple Support

  Regarding the slow performance issue you mentioned. have you noticed what is happening with any specific application? I would like to gain a better understanding of this issue before providing specific recommendations. To answer your concerns about the battery life, take a look at this document for more information on how to monitor your use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To get tips on maximizing the performance of your battery, take at look at this resource:

  Batteries - maximize Performance - Apple

  See you soon.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

  iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

  Fast pleas tell me

• Impossible to activate my trial version window 2003 Server 360 days

  Impossible to activate my trial version window 2003 Server 360 days

  error: product key is not valid

  You have already posted this somewhere else - no matter where you post the answer will always stay the same - no Windows operating system has a 360-day downloadable trial available.

  FC

  http://answers.Microsoft.com/message/fcabf370-9489-4c8a-AAED-ecb578fd00ca

• Impossible to activate the automatic update

  I tried securioty msc and Panel Essensials of Windows, as well as system menu... everything for nothing helped... less than 30 seconds of the automatic update is disabled.

  * Title *.
  Impossible to activate automatic update order to use Microsoft uypdate. Enery time that I manually activate the automatic updates, something disables it keeps me updated successfully in the update of Microsoft

  Mgawat,

  In addition to the information requested, try the fix it tool from the link below and let us know the results of that.  First run it in normal mode and test.  If you still have a problem then run it in aggressive mode.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is impossible to activate windows xp! Activation window empty.

  Is impossible to activate windows xp! then, because I don't want to use windows 7, please help!

  I activated the front windows, a long time ago, but now it says I do not have, so I can't just acitivate, right? but here's the problem:

  When I click on "Activate windows" in system tools, it comes through the window, but in the window, there is nothing in it, no words or pictures, just a blue background, what can I do! ??? He must have three choice for me, we're activate online, one is by phone, we're not to activate now. but my situation is nothing! Nothing in the window, except two small picture to the left and right to the top of corner, the small image has a square, circle and triangle on a large white rectangle.

  Please HELP ! I have 2 more days to activate!

  Hi KhaBL,

  You cannot use a CD to install on another computer. I suggest that you contact the manufacturer of the laptop if you do not have the installation CD computer laptop with you.

  You can also contact Microsoft telephone support.

  Help and Support - Windows XP

• Impossible to activate winodws updates on Vista Home

  I have the question googles; tried the Microsoft fix filoe but impossible to activate Windows update

  Hello

  (1) what happens when you try to activate the update? You receive an error message?

  (2) who is the Fixit you tried?

  (3) when was the last time it worked?

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and install the updates.

  Follow the suggestions of this link.

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2 : Reset Windows Update components and check with the question.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows

  Method 3: Run the system update tool and install updates.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  If the method above does not work, proceed to the next method.

  Method 4: Perform a full scan of the computer using the following antivirus applications and try to install the updates.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps!

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the Agent FTR

  Dear all,

  I tried to activate the FTR agent but, impossible to activate it. When I checked the logs, I could see the following errors.

  "14/09/30 10:28:03.564 ECHO FATAL [Thread-40] com.quest.ftr.agent.ComMonitorThread - ComMonitorThread taken NoClassDefFoundError. Check the installation and the path of JAR files. Could not initialize class com.jacob.com.ComThread

  java.lang.NoClassDefFoundError: has not been initialized class com.jacob.com.ComThread
  at com.quest.ftr.agent.ComMonitorThread.run(ComMonitorThread.java:246)

  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.glue.core.services.AgentStatusServiceImpl - failure reported Agent
  2014 09-30 10:28:03.564 ECHO VERBOSE [Thread-40] com.quest.ftr.agent.ComMonitorThread - bridge COM out restart = false
  2014-09-30 10:28:03.564 ECHO com.quest.ftr.agent.ComMonitorThread WARN [Thread-40] - Caught throwable son freeing com could not initialize class com.jacob.com.ComThread
  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.ftr.agent.ComMonitorThread - COM monitor thread exit
  2014-09-30 10:28:03.564 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection to stop
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection stopped
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.ftr.agent.FTRAgent - Agent stops collection
  2014-09-30 10:28:03.579 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - agent of destruction
  2014-09-30 10:28:03.579 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance agent - destroyed"

  Could someone check and help me on this.

  Thanks in advance. :)

  Hi Renon,

  The first thing to check is that you have a 32-bit Foglight Manager Agent to run the agent FTR (even if it is on OS 64 - bit). This is a common reason for the agent to fail to start.

  From the release notes: The Foglight Transaction recorder and player are supported on 32-bit and 64-bit systems. Transaction Foglight player works on 64 bit systems only if the 32-bit version of Foglight Manager Agent is installed.

  Kind regards

  Darren

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n