Impossible to activate the sound function

Similar Questions

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• My sound system was disabled and displays a code of 32. How can I activate the sound system?

  I moved my computer and added a user to the system.  It will now not all sounds and troubleshooting it the system state is disabled and a code 32.  How to activate the sound?

  Hi MelWideman,

  Method 1

  I suggest you run the troubleshooter of playback of the sounds and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2

  If the previous step fails, then I suggest that you manually download and install the updated drivers for the card its installed on the computer by visiting the sound card manufacturer or computer manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• How to activate the Sleep function to put the computer to sleep if a program is open?

  I have Windows Vista basic on a desktop Dell 530.  I found that if I have a program or application running (such as I-tunes or windows media player) then the Sleep function will not put the computer to sleep.  How to activate the Sleep function to replace these programs and put the computer to sleep?

  Note: This is how it was with windows XP, the Sleep function would put the computer to sleep no matter what was running, he was reliable, if you left the computer and I forgot that you had something running.

  Thanks for your help.

  Hi kevino4130,

  If you disable sharing on your computer (not only the power settings) of media, it should allow him to enter the mode 'sleep'.

  See if that does not solve your problem and let us know.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I activate the SOUND in the streets & trips?

  Do not hear Lady navigation - not strong enough. How can I activate the SOUND? Acer Aspire laptop Windows 7. I checked on the sound of the computer it's upward everywhere where I can find a volume control. No luck. Sounds of the Internet cross just correct, but S & T is much softer. I hear she's talking, but not strong enough to understand what she said. My old Dell, sounds are very good.  Am confused.

  Maybe the manufacturer of your laptop has an updated audio driver on their website you could try?

  http://us.Acer.com/AC/en/us/content/drivers

  Some suggestions are in these discussions.

  Low sound level in Microsoft Streets and Trips 2008
  http://www.laptopgpsworld.com/2044-audio-level-too-low-Microsoft-Streets-Trips-2008-a#post14199

  His penchant for streets & trips, but good for other applications
  http://www.laptopgpsworld.com/3915-sound-low-streets-trips-but-good-other-applications

  You can also try to post in this forum specific help.

  Streets & Trips Forum
  http://social.Microsoft.com/forums/en-AU/streetsandtrips/threads

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I activate the sound 5.1 surround sound when watching Netflix?

  How can I activate the sound 5.1 surround sound when watching Netflix?  I look at all my other content (DVDs, TV recorded movies, etc.) in Windows Media Center in Dolby Digital 5.1 surround sound.  I contacted Netflix and they said that Microsoft does not support:
  shiregator How can I activate the 5.1 surround sound media Center windows? blog.Netflix.com

  Netflixhelps You'll want to talk to Microsoft to see if it is supported.
  https://Twitter.com/#! / Status/Netflixhelps/162681802559995906

  When will support surround sound on Netflix streaming?

  Thank you.

  Hello Shiregator

  As far as I know, the only Netflix 5.1 Dolby device supported for Microsoft's Xbox 360. On a side note, not all movies streaming from Netflix support 5.1. Make a search for Netflix movies in 5.1 and a list making. Thanks again.

• Activate the Sleep function on menu

  Original title: ACTIVATION FUNCTION SLEEP

  How can I activate the sleep function under options of closing on Windows 7 Ultimate? It remains disabled. Activate Windows after a clean installation allows in general with her. Unfortunately, this time it remains disabled causing inconvenience.

  Hello

  You can not enter the correct command. There is a space between powercfg and -a. Make sure that the command has been entered correctly.

  Also, make sure that you have downloaded the latest display driver for Windows 7 Toshiba Web site activate sleep under power menu.

  Here is an article explained the reasons underlying the "sleep mode" disabled under power options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-isn ' t-sleep-available

  Please keep us informed.

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• How to activate the search function.  I get no match found when I search for words on the scanned PDF document

  How to activate the search function.  I get no match found when I search for words on the scanned PDF document

  A scanned document is just an image; even if it contains text, it is not searchable.

  Put text in a scanned image available, you will need to perform the recognition of text (OCR), which can be made with Acrobat, but not the free player.

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry