Impossible to determine the application exit code

Similar Questions

• Executed as user: domain\username. The return value is unknown. The process exit code was 128. The step failed.

  I have a job with 20 steps. This error occurs for any stage of perticular. It produces randomally at any stage.

  "The return value is unknown.  The process exit code was 128.  The step failed. »

  This is not the right forum for SQL database issues.

  Please repost your question in the MSDN SQL forum
  http://social.msdn.Microsoft.com/forums/en-us/sqldatabaseengine/threads

  Sincerely,

  Marilyn

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again

• Get the fatal exit Code 34 when installing an application

  Anyone running into that?  I download an app (PS 6, ID 6, etc.) through AAM and then tries to install it.  Towards the end of the installation, I get a fatal error with exit Code 34.  Msg log readings:

  FATAL: Payload ' {E2286898-049D-43EF-AA30-0A93E3744AC3} camera profiles Installer_7.1_AdobeCameraRawProfile7.0All 6.0.98.0 "information not found in Media_db.

  I tried to download and install a trial version of PS 6 and the same error occurred.  I tried to start the cleaning of the CS, but he says that there is no session CS installed on my iMac (last version of Lion).  I completely deleted beta and versions CS apps test before running the MAO.  I had the RC of Camera Raw 7.1 candidate charged simultaneously on my Mac, but it does not uninstall app for that (at least as I can tell). It seems that the RC 7.1 may be involved with this error but I can't identify how to get rid of him.

  Any ideers there?

  I had the same problem, and I use windows 7 also. After discussion with the support adobe technique. He showed me how to solve the problem.

  Also, I tried the clean tool already. That did not help.

  Navigate to C:\Program Files (x 86) \Common Files\Adobe if you use the 32-bit system, I think it would be C:\Program Files\Common Files\Adobe

  Name of the folder change 3.

  Adobe PCD-> Adobe PCDold

  backup-> backupold

  Caps-> capsold

  Then run the installer again.

  This method worked for me. Hope that might work for you too and save you time.

• Catch the python exit code

  How to get the exit code of a script called from teststand python?

  for example

  sys. Exit (10)

  Forget it.

  It must be something in my script.

  I made a simple and with this script, I get the exit code...

• Open the browser and the application exits

  Hello

  I need to open a browser with a URL and close the application (which started the browser).

  I need this behavior for improving the application.

  OS > = 4.5

  I read http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800440/How_To _...

  If I use launchBrowser() (BlackBerry Device Software prior to version 4.0), I get an exception ControlledAccessException.

  Also, I found the net.rim.blackberry.api.invoke.Invoke class, but I don't see anything on the browser.

  If I use Browser.getDefaultSession () .displayPage ("http://www.BlackBerry.com/fr");  the browser appears, but when I want to finish the application, the browser closes too.

  How can I open the browser and 'kill' the application?

  Thank you.

  I wrote once the weblaunchers for blackberryforums.com, some time ago...

  I use the app as a base class and call the code you mentioned:

  Browser.getDefaultSession () .displayPage ("url")

  and for good measure also

  Browser.getDefaultSession () .show)

  the finishs application just up and running with this spell, the browser continues.

  in fact the browser is never closed, he always runs in the background.

• How to determine the application is open...

  my application has a lot of screens and application will run on a background of too?

  I want to run a piece of code when I open the application?

  But I canoe find a function that runs when I open the application?

  Y at - it a function that runs when I open you application...

  or I follow any other way to do this? Please you mension the API

  Thanks in advance...

  See UiApplication #activate () to address

• Re-installation of creative suite all-in cs6, I get the error: Exit Code: 7 ERROR: DW013: could not get the root of inChildPath

  System:

  Windows 7 (Service Pack 1)

  3720QM-i7 CPU @ 2.60 Ghz

  16 GB OF RAM

  Adobe Creative Suite Production Premium CS6

  I got a computer breakdown and both after effects and the first started crashing after that.

  I uninstalled then and since then I can not reinstall. I get this error message:

  Exit code: 7

  ERROR: DW013: could not get the root of inChildPath

  I tried:

  1. 1- Repair of Microsoft Visual C++ Redistributable Packages
  2. 2- Uninstall Adobe AIR, then reinstall the AIR and the Adobe help
  3. 3- I tried to use the vacuum (running it as an administrator but but it does not open)

  What is my next move?

  I have work to do.

  Thank you

  Stefan Vanderland

  Code 7 https://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

• I keep trying to install the PS15 Exit Code: 34 please see specific errors below for troubleshooting. For example, ERROR: - Summary - 1 or the fatal errors, 0 FATAL error: Payloa

  I can not download PS 15 and receive the exit code 34. Any ideas?

  Exit code: 34

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -fatal error 1, 0 error (s)

  FATAL: Payload "Camera profiles Installer_8.5_AdobeCameraRawProfile8.0All 9.0.0.21 {08F2E584-AFE2-47EA-9891-94768CFDA234} ' information not found in Media_db.

  -------------------------------------------------------------------------------------

  See the link below:

  (Exit code: 34 please see specific errors below for troubleshooting.) For example, ERROR: - Summary - 1 or fatal errors, 0 FATAL error: "Microsoft Visual C++ 20 payload.

• I tried to install Adobe Creative Suite 5.5 on MAC OS 10.10.3 (iMac, retina). All this work well except Acrobat Pro! I always get the message: Exit Code 6 fTl - error (s) 2 (s) WARNING (s)

  I'm working on a new iMac, retina 4 GHz with system 10.10.3

  When I reinstall Adobe Creative Suite 5.5, I get a problem with Acrobat Pro! Complete installation works well except Acrobat Pro. I get the following message:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s), 0 warning (s)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Acrobat Professional: installation failed

  -------------------------------------------------------------------------------------

  Dose anyone have a solution?

  Hi Daniel,.

  You can consult the following document and follow the steps mentioned and see if that solves the problem for you.

  The document is on the Exit Code 6 and 7 of the Exit Code for CS5 and CS5.5.

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5

  Let us know how it goes. Please come back if this does not solve your problem.

  Concerning

  Sukrit diallo

• See the customer exit codes to trigger the closure of session?

  Hi all

  I'm in the middle of a virtualization project using light clients t5740e Windows 7 embedded HP and discover on our Cluster (VMWare all, of course), and boy, it was a great experience. However, I'm stuck at a single bump. I have, for reasons of security and control, been instructed to have people connect and then log their desktop with the LogInAsCurrentUser. I used the recommended scripts to silently launch 4.6 view as the shell for the machine and that market is fantastic, except that I need the machine to connect back once a user disconnects voluntarily. I found the document (http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.administration.doc/GUID-93346210-E5A4-4ED3-8D38-89A2DED1FB8A.html) that lists the exit codes.

  Has anyone been able to use exit codes in a script that will be properly trying to reconnect in the case of a server disconnect etc. and then on a place clean output log (0) the user out of the computer thinclient? Any other suggestions would be quite welcome. Thank you!

  -Farmer will

  Please look at my code again. There is a loop there that will cause the Client to re - run every time except if the ERRORLEVEL is 0. The code you presented does not loop, so it does not matter what is the exit code, it will ALWAYS disconnect. I think that if you put the mechanism in a loop in your code and the exit code is not 0, it will be re - run the Client from the view and not to close the session. Specifically, you need to code as header ": see" before you run the customer view and then the view "goto" after running client to view and control for ERRORLEVEL after. So, modify your code above, you will have:

  [new view.cmd file]

  off @echo
  set path = C:\program files\vmware\vmware view\client\bin;%path%
  : View
  Start/w "" wswc.exe - ServerURL 10.1.96.117 connectUSBOnStartup - true - ConnectUSBOninsert true
  IF ERRORLEVEL 0 GOTO LOGOFF
  GoTo view
  : LOGOFF
  CLOSURE OF SESSION

• Impossible to uninstall the application installed on the market

  Hello

  How can I go about uninstalling the application of Wikipedia (who keeps bugging me to update)
  I installed Firefox on the Marketplace?

  I can find about the app: apps and on the market, but there is no possible way to uninstall;
  no uninstall button can be found and long - by clicking on that icon requires only to be selected for copying
  in the Clipboard. How can I go to get rid of this app?

  4.2.1 Android
  Firefox 29.0.1

  Came here looking for an answer to this specific question. Wikipedia not installable. I use Firefox Beta 32.0 on Android 4.4.4. The Wikipedia app is installed as an application "synthetic". She also is no longer available on the market for this platform. I had uninstalled the synthetic application using the removal procedure normal Android app, but it was still showing upward in installed Firefox and bugging me about the updates. I decided to re - install the application from the notification of update of Firefox (remember that's not on the market more for this platform). I uninstalled and then again the application normally (via Android) and this time, he had also disappeared from Firefox.
  I hope this helps.

• Impossible to uninstall the applications due to administrative problems.

  Original title: I think it's a virus

  I can not uninstall a lot of apps or install them

  It is said

  You must be an administrator to remove this application.

  and this is the administrator account.

  2. I can not format the or even install another, that he always says

  the specified service does not exist as an installed service.

  I hope that respond you quickly.

  Hi, Ahmed.

  Thanks for posting your query on the Microsoft Community.

  Good answer:

  1. what applications you are trying to uninstall?

  2 is the issue limited to one application or several apps?

  I suggest that you try to uninstall the application in Mode without failure.

  1. click on the link below and follow the steps to go to the safe mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  2. press the Windows icon and select Control Panel.

  3. follow the steps in the link below to uninstall the program.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-in/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  If you think that your system is infected, you can run an antivirus scan and check.

  I hope this helps. Please respond if you have related research.

  Kind regards

  Jesinta Rozario

• BlackBerry 8310 Smartphones: Impossible to reinstall the applications.

  Hello

  I was the proud owner of a BB 8310 for 10 days and am now the proud owner of a useless piece of modern art...

  Everything was fine until I connected on the BB site and tried to update the software.

  First, I downloaded the latest version of the Desktop software, then connected my phone to my computer and started the process of updating. Everything was fine so I went to the legendary coffee and when I came back found a message telling me that the connection was lost, I want to try again? Yes of course. And then everything started going downhill.

  Received the error app 200, the hourglass for hours.

  So to make a long story short, I tried to reload everything using the trick where you connect the BB without the battery. Well, he works to the charge process request where the Red led goes and I get the message that the connection has been lost. Try again? Yes. Wait he reconnects (hourglass goes round and round), reconnected... re - unplug and restart to load the applications.

  I noticed that the disconnection does not occur during the loading of any specific application but more or less randomly.

  OK, so after several attempts I cancelled the process and got this error message: fatal error, unspecified error [J:0 x 00000005]

  I tried on a PC with Windows 7 with Windows XP and even on a Mac.

  Still with me?

  Well, someone has an idea of what's going on? Y at - it a bug in my phone in the desktop application or downloaded applications?

  Beats me.

  Thank you

  Jean-Luc

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Good luck.

• Impossible to recompile the application Summit in the form of 11g

  Hi gurus,

  I try to install the application of top in the 11g version. Try to recompile all the objects (.pll, .mmb, .fmb) but all not able to compile .fmb.

  Here are the steps I did:

  1 extract the app from top to c:\summit

  2. create the schema of Summit by running the script

  3. set the FORMS_PATH registry and windows variables env FORMS_PATH to c:\summit

  4 compile the .pll, the .fmb and the .mmb

  Appreciate any help.

  Kind regards

  Ferrere

  I just tested this in forms 11.1.2.2 (x 64) and it works properly.  I am able to open all the files.  That said, if you do not correctly set FORMS_PATH, you will get an FRM-18108 error that says it cannot locate a required library.  It is expected, because the shape has a dependency on an OLB and therefore it must be included in FORMS_PATH.

  So, that means one of a few things:

  1. you do not actually use the version of forms, you believe that you are using

  2. you have multiple installed versions of forms and the system path points to a very old version of the constructor

  3. the error message you get is not one that suggests the form cannot be opened, but rather the one I mentioned above

  4. the file you download is somehow corrupted.